Answer:
150 J
Explanation:
If there is not any dissipative force in the system, the mass and the spring will oscillate eternally., but of course, we assume this is a theoretical situation. The conservation of energy in a system implies that the sum of the potential energy plus kinetic energy remains constant, therefore if in the initial point the mass has 200 J (potential energy) and is at rest ( kinetic energy = 0) the overall energy at the beginning is 200 J. At any point of the oscillation if the potential energy is 50 J the kinetic energy must be 150 J.
A wheel has an angular speed of 32 rev/s when it experiences a constant angular acceleration of 65 rev/s2 which causes it to spin FASTER. During this time the wheel completes 92 rev. Determine how long the wheel was experiencing this angular acceleration and how fast the wheel was spinning at the end of this period. Assume that the wheel doesn't change the direction of its spin.
Answer:
ωf = 113.95 rev/s
t = 1.26 s
Explanation:
We can use the third equation of motion to find out the final spinning speed of the wheel:
[tex]2\alpha \theta = \omega_f^2 -\omega_i^2\\[/tex]
where,
α = angular acceleration = 65 rev/s²
θ = No. of revolutions completed = 92 rev
ωf = final angular speed = ?
ωi = initial angular speed = 32 rev/s
Therefore,
[tex](2)(65\ rev/s^2)(92\ rev) = \omega_f^2 - (32\ rev/s)^2\\\omega_f^2 = 11960\ rev^2/s^2 + 1024\ rev^2/s^2\\\omega_f = \sqrt{12984\ rev^2/s^2}[/tex]
ωf = 113.95 rev/s
Now, for the time we can use the first equation of motion:
[tex]\omega_f = \omega_i +\alpha t\\113.95\ rev/s - 32\ rev/s = (65\ rev/s^2)t\\t = \frac{81.95\ rev/s}{65\ rev/s^2}\\\\[/tex]
t = 1.26 s
What is characteristic of a good insulator?
A. Electrons are usually not moving at all.
B. Electrons are free to move around.
C. Electrons are semi-free to move around.
D. Electrons are tightly bound to the nuclei.
Answer:
D. Electrons are tightly bound to the nuclei.
Explanation:
In an insulator, the electrons of the outer most shell are bound with a very high electrostatic forces coming from the nucleus of each atom so electrons cannot flow around all atoms making up the material as in a conductor.
The characteristic of a good insulator is Electrons are tightly bound to the nuclei. (option d)
In a good insulator, electrons are tightly bound to the nuclei of their atoms. This means that they are not free to move around within the material, unlike conductors where electrons are relatively loosely bound and can move freely. Due to this strong binding, electrons in insulating materials cannot carry an electric charge or energy easily from one atom to another.
When an electric field is applied to an insulator, the electrons may experience a small displacement within their respective atoms, but they generally do not move from one atom to another or flow through the material like they would in a conductor. As a result, insulators prevent the flow of electric current and are used to isolate or protect conductive elements from accidental contact.
So, the correct answer is D. Electrons are tightly bound to the nuclei.
To know more about insulator here
https://brainly.com/question/2619275
#SPJ6
A torque of 36.5 N · m is applied to an initially motionless wheel which rotates around a fixed axis. This torque is the result of a directed force combined with a friction force. As a result of the applied torque the angular speed of the wheel increases from 0 to 10.3 rad/s. After 6.10 s the directed force is removed, and the wheel comes to rest 60.6 s later.
(a) What is the wheel's moment of inertia (in kg m2)? kg m
(b) What is the magnitude of the torque caused by friction (in N m)? N m
(c) From the time the directed force is initially applied, how many revolutions does the wheel go through?
______ revolutions
Answer:
[tex]21.6\ \text{kg m}^2[/tex]
[tex]3.672\ \text{Nm}[/tex]
[tex]54.66\ \text{revolutions}[/tex]
Explanation:
[tex]\tau[/tex] = Torque = 36.5 Nm
[tex]\omega_i[/tex] = Initial angular velocity = 0
[tex]\omega_f[/tex] = Final angular velocity = 10.3 rad/s
t = Time = 6.1 s
I = Moment of inertia
From the kinematic equations of linear motion we have
[tex]\omega_f=\omega_i+\alpha_1 t\\\Rightarrow \alpha_1=\dfrac{\omega_f-\omega_i}{t}\\\Rightarrow \alpha_1=\dfrac{10.3-0}{6.1}\\\Rightarrow \alpha_1=1.69\ \text{rad/s}^2[/tex]
Torque is given by
[tex]\tau=I\alpha_1\\\Rightarrow I=\dfrac{\tau}{\alpha_1}\\\Rightarrow I=\dfrac{36.5}{1.69}\\\Rightarrow I=21.6\ \text{kg m}^2[/tex]
The wheel's moment of inertia is [tex]21.6\ \text{kg m}^2[/tex]
t = 60.6 s
[tex]\omega_i[/tex] = 10.3 rad/s
[tex]\omega_f[/tex] = 0
[tex]\alpha_2=\dfrac{0-10.3}{60.6}\\\Rightarrow \alpha_1=-0.17\ \text{rad/s}^2[/tex]
Frictional torque is given by
[tex]\tau_f=I\alpha_2\\\Rightarrow \tau_f=21.6\times -0.17\\\Rightarrow \tau=-3.672\ \text{Nm}[/tex]
The magnitude of the torque caused by friction is [tex]3.672\ \text{Nm}[/tex]
Speeding up
[tex]\theta_1=0\times t+\dfrac{1}{2}\times 1.69\times 6.1^2\\\Rightarrow \theta_1=31.44\ \text{rad}[/tex]
Slowing down
[tex]\theta_2=10.3\times 60.6+\dfrac{1}{2}\times (-0.17)\times 60.6^2\\\Rightarrow \theta_2=312.03\ \text{rad}[/tex]
Total number of revolutions
[tex]\theta=\theta_1+\theta_2\\\Rightarrow \theta=31.44+312.03=343.47\ \text{rad}[/tex]
[tex]\dfrac{343.47}{2\pi}=54.66\ \text{revolutions}[/tex]
The total number of revolutions the wheel goes through is [tex]54.66\ \text{revolutions}[/tex].
Two identical speakers are set some distance apart in a large open field. Both are producing sound, in unison, with a wavelength of 4 m. An observer wandering around the field notices that the sound is surprisingly loud at certain locations and unusually quiet at others. The observer concludes that this is the effect of interference between the two sources of sound waves. For each location, indicate which sort of interference would occur at that point.
Answer:
Constructive interference occurs at the surprisingly loud locations and destructive interference occurs at the unusually quiet locations.
Explanation:
This is because, constructive interference tends to combine the effects of the wave when they are in phase (that is, moving in the same direction), which thus amplifies the effect and produces surprisingly loud sounds at those locations, while destructive interference occurs when the waves are out of phase with each other(that is, move in opposite directions) and thus, their effects tend to cancel out thus producing locations of unusually quiet sounds.
A student wearing in-line skates pushes against a brick wall. why does the student move away from the wall ?
1. Because the forces acting on the student are balanced
2. Because the forces acting on the student are creating a net force
3. Because gravity is less than the student's push on the wall
4. Because the friction between the skates and the pavement is greater than the student's push on the wall
Answer:
Because the forces acting on the student are creating a net force.
Explanation:
I took the test and that was the answer
Answer:
Because the forces acting on the student are creating a net force
Explanation:
Is this right or they wrong definitions which ones are the right ones someone !!!!!
Answer:
They are right.
Explanation:
Answer:
Mechanical Energy : KE + PE
Conversion : "When energy transfers from one form to another"
Potential Energy: the energy possessed by a body by virtue of its position relative to others , stresses within itself, electric charge , and other factors .'
Kinetic Energy: energy of an object in motion
Law of conservation of energy: KE+PE+friction=KE
Explanation:
First of all mechanical energy is kinetic energy plus potential energy (it is the energy of movement) So:
Mechanical Energy : KE + PE
Conversion is when energy converts or becomes a different form. So:
Conversion : "When energy transfers from one form to another"
Potential energy is stored energy, in Physics I or AP Physics I, it is often due to it being at a height, but batteries, foods, etc. are also example of it, so:
Potential Energy: the energy possessed by a body by virtue of its position relative to others , stresses within itself, electric charge , and other factors .'
Kinetic energy is for objects in motion so you got it right!
Kinetic Energy: energy of an object in motion
The law of conservation of energy means there is the same amount of energy before, as there is after, so when you see an equation with energy on both sides, it is usually this. Also, this is the last question left, so this has to be the answer.
Law of conservation of energy: KE+PE+friction=KE
What happens when a neutral atom gains an electrons?
Answer:
The neutral atom becomes an anion.
Explanation:
When a neutral atom gains an electron (e−), the number of protons (p+) in the nucleus remains the same, resulting in the atom becoming an anion (an ion with a net negative charge).
Which of the following is true of the deep
water layer of the ocean?
A. warmest and least dense of the ocean layers
B. experiences a rapid decrease in temperature
C. is warm in the summer and cold in the winter
D. cold all year round
HELP 30 POINTS
The picture above shows a cross section of the Earth’s interior including both oceanic crust and continental crust. Along the seafloor, there are mid–ocean ridges where magma rises to the surface and creates new crust. There are also areas where crust is recycled as oceanic crust goes below continental crust. What type of boundary would occur at a mid-ocean ridge?
Mid-ocean ridges happen along divergent plate boundaries, where new ocean floor is created as the Earth’s tectonic plates spread apart. As the plates separate, molten rock rises to the seafloor, producing large volcanic eruptions of basalt.
the density of gold is 19g/m³ what is the volume of 38g
let the volume be x
19 = 38/x
x=38/19
x=2
volume is 2 cm^3
Coherent light with wavelength of 580 nm passes through two very narrow slits, and the interference pattern is observed on a screen a distance of 3.00 m from the slits. The first-order bright fringe is at 4.81 mm from the center of the central bright fringe. For what wavelength of light will the first-order dark fringe be observed at this same point on the screen?
Answer:
the required wavelength is 1.15815 μm
Explanation:
Given the data in the question;
The position of bright fringes [tex]y_m[/tex] on screen in double slit experiment is expressed as follows;
[tex]y_m[/tex] = mλD / d
solving for d, we substitute 1 for m
y₁ = (1)λD / d
d = λD / y₁
given that λ = 580 nm = 5.8 × 10⁻⁷ m, D = 3.00 m and y₁= y₀ = 4.81 mm = 0.00481 m
so we substitute
d = λD / y₁
d = ( 5.8 × 10⁻⁷ m × 3.00 m ) / 0.00481 m
d = 0.00000174 m² / 0.00481 m
d = 3.6117 × 10⁻⁴ m
Now, position of dark fringe [tex]y_m[/tex] on screen in double slit experiment is expressed as;
[tex]y_m[/tex] = ( m + 1/2 )λD / d
we substitute 0 for m
y₀ = ( 0 + 1/2 )λD / d
y₀ = λD / 2d
2y₀d = λD
λ = 2y₀d / D
we substitute
λ = ( 2(0.00481 m) ( 3.6117 × 10⁻⁴ m) ) / 3.0 m
λ = 1.15815 × 10⁻⁶ m
λ = 1.15815 μm
Therefore, the required wavelength is 1.15815 μm
What my fav food for 20 points if you know it!?
Answer:
pizza
Explanation:
Answer:
sea food???
Explanation:
What do radio waves and gamma rays have in common?
They are both electromagnetic waves.
They are both low frequency waves.
They can only travel in a vacuum.
They both are part of the visible light spectrum.
Answer:
Both Magnetic
Explanation:
what do solar winds and the earths magnetic field create
Answer:
bc earth rotates
3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P
Explanation:
Answer:
The interaction between the solar wind and Earth's magnetic field, and the influence of the underlying atmosphere and ionosphere, creates various regions of fields, plasmas, and currents inside the magnetosphere such as the plasmasphere, the ring current, and radiation belts.
Explanation:
A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of:_____.
a. 4d.
b. 16d.
c. 2d.
d. 8d.
Answer:
A. 4d
Explanation:
Let's begin with the formula for the magnetic field produced by a long wire.
[tex]B = \frac{\mu_0I}{2\pi d}[/tex]
So [tex]d=\frac{\mu_0 I}{2\pi B }[/tex]
at point d_{1} is
[tex]d_{1}=\frac{\mu_{0} i}{2 \pi B_{1}} \\ \frac{d_{1}}{d}=\frac{\frac{\mu_{0} i}{2 \pi B_{1}}}{\frac{\mu_{0} i}{2 \pi B}} \\ d_{2}=d\left(\frac{B}{B}\right) \\ =d\left(\frac{20 \mathrm{mT}}{5 \mathrm{mT}}\right) \\ =4 d[/tex]
Hence, option (A) is correct answer
What do you mean by physics?
Answer:
Explanation:
Physics is the branch of science that studies the natural world and its rules and orders. It is one of the oldest sciences as ancient people study the stars and astronomy is considered part of Physics.
Which of the following is an example of an electromagnetic wave?
a radio wave
a water wave
the oscillation of a spring
sound waves
A golf ball strikes a hard, smooth floor at an angle of 27.0 ° and, as the drawing shows, rebounds at the same angle. The mass of the ball is 0.0200 kg, and its speed is 33.0 m/s just before and after striking the floor. What is the magnitude of the impulse applied to the golf ball by the floor? (Hint: Note that only the vertical component of the ball's momentum changes during impact with the floor, and ignore the weight of the ball.)
Answer:
J = 3.564 N.s
Explanation:
From the given information:
angle θ = 27°
mass = 0.0200 kg
speed = 33.0 m/s
To determine the impulse applied using the equation:
J = m(2V cos θ)
J = 0.0200 (2 × cos (27.0))
J = 0.0200 (2 × 0.8910)
J = 0.03564
J = 3.564 N.s
TIME REMAINING
15:56:15
A plant root is an example of
Type here to search
Answer:
h
Explanation:
A 0.545-kg ball is hung vertically from a spring. The spring stretches by 3.56 cm from its natural length when the ball is hanging at equilibrium. A child comes along and pulls the ball down an additional 5cm, then lets go. How long (in seconds) will it take the ball to swing up and down exactly 4 times, making 4 complete oscillations before again hitting its lowest position
Answer:
t = 9.52 s
Explanation:
This is an oscillatory motion exercise, in which the angular velocity is
w = [tex]\sqrt{ \frac{k}{m} }[/tex]
Let's use hooke's law to find the spring constant, let's write the equilibrium equation
F_e - W = 0
F_e = W
k x = m g
k = [tex]\frac{m g}{x}[/tex]
k = 0.545 9.8 /0.0356
k = 150 N / m
now the angular velocity is related to the period
W = 2π / T
we substitute
4π² T² = k /m
T = 4pi² [tex]\sqrt{ \frac{m}{k} }[/tex]
we substitute
T = 4 pi² [tex]\sqrt{ \frac{0.545}{150} }[/tex]
T = 2.38 s
therefore for the spring to oscillate 4 complete periods the time is
t = 4 T
t = 4 2.38
t = 9.52 s
Brian Lara is a cricketer playing in the field on the second day of a cricket test-match. He exerts a forward force on the 0.145kg cricket ball, as he catches it, to bring it to rest from a speed of 38.2m/s. During the process, his hand recoils a distance of 0.135m. Determine the acceleration of the ball and the force which is applied to it by Brian Lara.
Answer:
a = -3984.6 m/s²
F = 577.76 N
Explanation:
The acceleration of the ball can be calculated by using the third equation of motion:
[tex]2as = v_f^2 - v_i^2\\[/tex]
where,
a = acceleration of ball = ?
s = distance covered = recoil distance = 0.135 m
vf = final speed = 0 m/s
vi = initial speed = 38.2 m/s
Therefore,
[tex]2(0.135\ m)a = (0\ m/s)^2-(38.2\ m/s)^2\\[/tex]
a = -3984.6 m/s²
here negative sign shows deceleration.
Now, for the force applied by Brian Lara will be equal in magnitude but opposite in direction of the force required to stop the ball:
[tex]F = -ma\\F = -(0.145\ kg)(-3984.6\ m/s^2)\\[/tex]
F = 577.76 N
Suppose we replace both hover pucks with pucks that are the same size as the originals but twice as massive. Otherwise, we keep the experiment the same. Compared to the pucks in the video, this pair of pucks will rotate View Available Hint(s) Suppose we replace both hover pucks with pucks that are the same size as the originals but twice as massive. Otherwise, we keep the experiment the same. Compared to the pucks in the video, this pair of pucks will rotate four times as fast. at the same rate. one-fourth as fast. twice as fast. one-half as fast.
Answer:
w = w₀ / 2 the angular velocity is half the initial value.
Explanation:
We can analyze this exercise as if we added another disk to obtain a disk with twice the mass, for which if the system is two disks, the angular tidal wave is conserved
initial instant.
L₀ = I₀ w₀
final moment
L_f = I w
the moment is preserved
L₀ = L_f
I₀ w₀ = I w
the moment of inertia of a disk is
I = ½ m R²
we substitute
½ m R² w₀ = ½ (2m) R² w
w = w₀ / 2
for the case of a disk with twice the mass, the angular velocity is half the initial value.
Medical devices implanted inside the body are often powered using transcutaneous energy transfer (TET), a type of wireless charging using a pair of closely spaced coils. And emf is generated around a coil inside the body by varying the current through a nearby coil outside the body, producing a changing magnetic flux. Calculate the average induced emf, of each 10-turn coil has a radius of 1.50 cm and the current in the external coil varies from its maximum value of 10.0 A to zero in 6.25 x10-6s.
Answer:
[tex]0.475\ \text{V}[/tex]
Explanation:
n = Number of turns = 10
r = Radius = 1.5 cm
I = Current = 10 A
t = Time = [tex]6.25\times 10^{-6}\ \text{s}[/tex]
[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi\times 10^{-7}\ \text{H/m}[/tex]
Magnetic field is given by
[tex]B=\dfrac{\mu_0I}{2r}\\\Rightarrow B=\dfrac{4\pi 10^{-7}\times 10}{2\times 1.5\times 10^{-2}}\\\Rightarrow B=0.00042\ \text{T}[/tex]
EMF is given by
[tex]\varepsilon=\dfrac{nBA}{t}\\\Rightarrow \varepsilon=\dfrac{10\times 0.00042\times \pi (1.5\times 10^{-2})^2}{6.25\times 10^{-6}}\\\Rightarrow \varepsilon=0.475\ \text{V}[/tex]
The average induced emf is [tex]0.475\ \text{V}[/tex].
PLEASE HELP! I'LL GIVE BRAINLEST
Answer:
In this conversation the Neil astronaut is right
This force will cause the path of the particle to curve. Therefore, at a later time, the direction of the force will ____________. This force will cause the path of the particle to curve. Therefore, at a later time, the direction of the force will ____________. have a component along the direction of motion remain perpendicular to the direction of motion have a component against the direction of motion first have a component along the direction of motion; then against it; then along it; etc.
Answer:
have a component along the direction of motion that remains perpendicular to the direction of motion
Explanation:
In this exercise you are asked to enter which sentence is correct, let's start by writing Newton's second law.
circular movement
F = m a
a = v² / r
F = m v²/R
where the force is perpendicular to the velocity, all the force is used to change the direction of the velocity
in linear motion
F = m a
where the force is parallel to the acceleration of the body, the total force is used to change the modulus of the velocity
the correct answer is: have a component along the direction of motion that remains perpendicular to the direction of motion
What is a gravitational force?
Answer:
It is the force that pulls down an object on the air
Answer: a downward pull on any object
Explanation:
How far could you walk backwards in one hour? Use your speed from the 10m test to calculate the answer. Show your work or you will not receive credit.
Answer: Sweetheart i'm not walking backward for an hour for your little assignment
Explanation: Do it yourself lazy! Have a great day!
scholastic science world
CHECK FOR UNDERSTANDING: VIDEO GAME TYCOONS
Which of the following is NOT a natural
source of pollution?
A. erupting volcanoes
B. dust storms
C. construction
D. forest fires
Answer:
hi
Explanation:
answer is C
have a nice day
sample of pure boron contains only isotope X and isotope Y.
A nucleus of X has more mass than a nucleus of Y.
[o[4].[4] The sample is ionised, producing ions each with a charge of +1.6 x 10°C.
The specific charge of an ion of X is 8.7 x 10°C kg".
Calculate the mass of an ton of X.
[1 mark]
h
mass of ion = kg
[4].[2] Determine the number of nucleons in a nucleus of X.
mass of a nucleon = 1.7 x 1077 kg
[2 marks]
h
number of nucleons =
[o[4].[3] Compare the nuclear compositions of X and Y.
[2 marks]
[o[4].[4] lons of Y have the same charge as ions of X.
State and explain how the specific charge of an ion of X compares with that of an
ion of Y.
[2 marks]
Answer:
[tex]1.84[/tex]×[tex]10^{-26}[/tex]
Explanation:
specific charge = [tex]\frac{charge}{mass}[/tex] so by rearranging for mass we get
mass= [tex]\frac{charge}{sepcifc charge}[/tex]
[tex]\frac{1.6×10^{-26} }{1.7×10^{-27} }[/tex] = answer in kg
