The probe used in a medical ultrasound examination emits sound waves in air that have a wavelength of 0.12 mm. What is the wavelength of the sound waves in the patient?a) 0.54 mm b) 0.12 mm c) 0.26 mm d) 0.027 mm

Answer:

114m

Explanation:

s=ut + 1/2 at^2

s=23 m/s ×3s + 1/2×3×3s^2×10m/s^2

= (69+45)m

= 114m

Answer:

Chemical Energy

Explanation:

Explanation:

Assuming the suitcase is near the surface of the earth, g = 9.8 m/s².

F = ma

F = (20 kg) (9.8 m/s²)

F = 196 N

Answer:

Explanation:

Load ( L ) = 800 N

Effort ( E ) = 200 N

Load distance ( LD ) = 10 cm

Effort distance ( ED ) = ?

now, Let's find the effort distance:

[tex] \mathsf{L \times LD = E \times ED}[/tex]

Plug the values

[tex] \mathsf{800 \times 10 = 200 \times ED}[/tex]

Multiply the numbers

[tex] \mathsf{8000 = 200 \: ED}[/tex]

Swipe the sides of the equation

[tex] \mathsf{200 \: ED = 8000}[/tex]

Divide both sides of the equation by 200

[tex] \mathsf{ \frac{200 \: ED }{200} = \frac{8000}{200} }[/tex]

Calculate

[tex] \mathsf{ED \: = \: 40 \: cm}[/tex]

Hope I helped!

Best regards!

Answer:

The velocity of the stone is 2.57 m/s.

Explanation:

Given that

Height = 0.337 m

We need to calculate the velocity of the stone

Using equation of motion

[tex]v^2-u^2=2gh[/tex]

Where, v = velocity of stone

u = initial velocity

g = acceleration due to gravity

h = height

Put the value into the formula

[tex]v^2-0=2\times9.8\times 0.337[/tex]

[tex]v=\sqrt{2\times9.8\times0.337}[/tex]

[tex]v=2.57\ m/s[/tex]

Hence, The velocity of the stone is 2.57 m/s.

Answer:

Parallel processing

Explanation:

It is a parallel processing because it involves the brain processing many part of problem simultaneously.

The brain natural mode of information involves performing many task .

It is also ability of the brain to simultaneously process incoming stimuli or signals of different quality. It is a part of brain's vision and divide what is seen into four major parts which are color, motion, shape, and depth.

Answer: B)  Parallel processing

Answer:

A. velocity and time

Explanation:

A force can be define as an agent which has the capacity to change the state of an object. It can either increase the velocity of a body, change its direction of motion or cause a moving object to come to rest.

From Newton's second law of motion;

F = ma

where F is the force on the object, m is the mass of the object and a is the acceleration of the object. The unit of force is kgm/[tex]s^{2}[/tex] or Newtons.

a = [tex]\frac{change in velocity}{change in time}[/tex]

In the given question, apart from the mass of the object which is constant, the students should take the measurements of the velocity and time in each trial so as to calculate the required acceleration.

Answer:

mass and acceleration!

Explanation:

Because i am in class just like you and got it wrong because i didn't choose   my first answer:(

Answer:

τ= F r     into the blade

Explanation:

The moment of a force is defined by

         τ = F x r

where the bold indicates vectors

Let us write in the expression in magnitude

         τ = F r sin θ

in our case the force is tangent to the wheel therefore the angle between F and the radius is 90º, and the sin 90 = 1

       τ= F r

The direction of τ can be used by the rule of the right hand, the fingers curve in the direction of the torque when advancing from the force to the radius and the thumb points in the direction of the torque.

In this case, for a clockwise rotation, the fingers are curved in the direction and the thumb points into the blade, this is the direction of the τ.

TRASLATE

El momento de una fura es definido por

         τ = F x r

donde la negrillas indican vectores

Escribamos en ta expresión en magnitud

          τ = F r sin θ

en nuestro caso la fuerza es tangente a la rueda por lo tanto el angulo entre F y el radios es 90º, y el sin 90=1

        τ = F r

la dirección de tau la podemos  usar la regla de la mano derecha, los dedos curva en la dirección del torque al avanzar dese la fuerza al radio y el pulgar apunta en la dirección del torque.

En este caso para un giro en sentido horario los dedos se curvan ente sentido y el pulgar apunta hacia dentro de lla hoja, esta es la dirección del troque

Answer:

Mass and distance

Explanation:

The force of gravity the masses exert on each other. If one of the masses is doubled, the force of gravity between the objects is doubled. increases, the force of gravity decreases. Hence, answer is mass and distance

Answer:

Using

1/2mv^2 = work done by friction

work done = force x distance

lets call the force 3 N

lets call v = 3 m/s

lets call mass = 2 kg

0.5 x 2 x 3^2 = 9 J

9/3N = 3 m/s

now times 3 m/s by square root of 2 of which is 1.4142

3 x 1.4142= 4.2426 m/s

0.5 x 2 x 4.2426^2 = 18

18/2N = 9 m

Answer: C

Explanation: It's a lot of math.

The option that gives the correct value for the angle theta above the horizontal axis of the velocity of the body, v is option C.

C. 53.1°

The given parameters are;

The velocity of the body relative to the horizontal axis, vₓ = 6 m/s

The velocity of the body relative to the vertical axis, [tex]v_y[/tex] = 8 m/s

Required;

The measure of the angle theta above above the horizontal axis of the velocity of the body, v

Solution:

The velocity of the body can be represented vectorially as follows;

v = 6·i + 8·j

The vectoral form gives the legs of the right triangle that has the magnitude and direction as the hypotenuse side

Therefore;

[tex]\theta = arctan \left(\dfrac{8}{6} \right) \approx \underline{53.1^{\circ}}[/tex]

Learn more about the vectors here:

https://brainly.com/question/16854117

https://brainly.com/question/16958684

https://brainly.com/question/17097378

Answer:

Cows,Pigs,Chicken. They are always in farm

Answer:

number 6 is wrong

the answer is pesticides

2.combines are used for harvesting or threshing.so number 2 is wrong

at least you tried

Explanation:

there is no such thing as weedicides

Answer:

1. True

2.True

3.False

4. True

5. True

6.False

7.False

8.True

9.False

10.False

Answer:

because it has no balance

Explanation:

We hammer the broader side of a nail instead of its sharp end to put it in wood. It is a concept based on the pressure exerted.

The force acting per unit area of an object is called pressure exerted. It means that pressure is inversely proportional to the area of cross section i.e. area increases, pressure decreases and vice versa.

The broader side of a nail has more area as compared to the sharp end. It means that the broader side will exert less pressure on them which make it easier for us to fix it into the wood.

Answer:

The dust present in the clouds.

Explanation:

The complicated composition molecules that can be found in space are generally associated with clouds of dust. The significant amount of dust in these clouds provides protection not only for these molecules, but for any body that makes up or is associated with dust clouds.

It is exactly this dust that protects the molecules against the action of ultraviolet rays.

In a food web, the removal of any trophic level upsets the balance within the web and can cause its eventual collapse. Because producers capture solar energy and convert it to food energy, their loss would affect every other level of the food web.

The removal of the producers would cause the collapse of the entire food web. Primary consumers or herbivores, which feed on producers directly, would die off. The next to be affected would be the secondary consumers or carnivores that eat the primary consumers. Higher level consumers would suffer as organisms from lower trophic levels start to die off. Decomposers would break down the bodies of dead organisms, returning their basic elements and compounds to the environment. However, even these dead organisms would run out and the entire food web would collapse.

Hope you like the answer.

Answer:

i) 60 W

ii) 100 W

Explanation:

In each case, the bulb that dissipates the most power is the bulb that glows brighter.  Power is voltage times current (P = VI).  Using Ohm's law, we can rewrite this as P = I²R or P = V²/R.

Bulbs are rated at a certain power for a certain voltage.  P = V²/R, so the bulb with the lower resistance will have the higher power rating.  Therefore, the 100 W bulb has a lower resistance than the 60 W bulb.

i) They are in series, so they have the same current.  P = I²R, so the bulb with the higher resistance will glow brighter.  That's the 60 W bulb.

ii) They are in parallel, so they have the same voltage.  P = V²/R, so the bulb with the lower resistance will glow brighter.  That's the 100 W bulb.

Answer:

find the sum of the inital and final velocitys and divide by 2 to find the average

Answer:

I do not agree with the answer.

Because in reality, the atom has 2 main parts and 3 subatomic particles.

Explanation:

The parts of an atom are:

- The crust: It is the outer part of the atom and is the place where the electrons are.

- The nucleus: It is the central part of the atom and is the place that contains the protons and neutrons.

The subatomic particles of the atom are:

- Electrons: They are negatively charged particles that go in the atom's crust and are divided into specific sections.

- Protons: They are particles with a positive electric charge, the number of protons in the nucleus of an atom is what determines the atomic number of an element.

- Neutrons: They are atoms with no electric charge.

Answer:

a business who buys goods and services

Answer:

The mass of the object and its height in the gravitational field of the Earth.

Explanation:

If we are talking about gravitational potential energy which is defined as:

[tex]U=m\,*\,g\,*\,h[/tex]

being "m" the object's mass, "g" the acceleration due to gravity, and "h" the height at which the object is located relative to the conventionally picked level for zero of potential energy.

As long as the value of "g" is constant, the only two variables that determine the gravitational potential energy are the mass (m) of the object and its relative height (h).

Answer:

The objects weight and height above Earth's surface

Explanation:

K12 :)

Answer:

a)  T = 1.26 s , b)  v_max = 0.14 m / s ,  a_max = 0.7 m / s²

c) x = 0.028 cos (5 t) ,    v = - 0.14 sin 5t,   a = - 0.7 cos 5t

Explanation:

This is a simple harmonic motion exercise that is described by the equation

    x = A cos (wt +Ф)

with

          w = √ (k / m)

let's apply this expression to our case

a) Angular velocity is related to frequency

          w = 2π f

frequency and period are related

          f = 1 / T

we substitute

         2π / T = √ (k / m)

         T = 2π √(m / k)

let's calculate

         T = 2π √(1/25)

          T = 1.26 s

In the expression for the period, the amplitude does not appear, therefore there is no dependence, as long as Hooke's law is fulfilled, which is correct for small amplitudes.

b) in the initial equation we have the position as a function of time, let's use the definition of speed and acceleration

           v = dx / dt

           v = - A w sin (wt + Ф)

the speed is maximum when the sine is -1

            v_max = A w

            w = √ (k / m)

            w = √ 25/1

            w = 5 rad / s

the amplitude of the movement is equal to the maximum compression of the spring

            A = 2.8 cm = 0.028 m

we substitute

            v_max = 0.028 5

            v_max = 0.14 m / s

acceleration

             a = dv / dt

             a = - A w² cos (wt + Ф)

the acceleration is maximum when the cosine is -1

             a_max = A w²

let's calculate

             a_max = 0.028 5²

             a_max = 0.7 m / s²

c) let's start by finding the phase constant

              v = -A w cos (wt + Ф)

at t = 0 they indicate that the system has v = 0

              0 = -A w sin (0 + Ф)

              Ф = sin⁻¹ 0

              Ф = 0

we write the equation

            x = 0.028 cos (5 t)

           v = - A w sin (wt + Ф)

           v = - 0.028 5 sin (5t + 0)

           v = - 0.14 sin 5t

acceleration

           a = - A w² cos (wt + Ф)

           a = - 0.028 5 2 cos (5 t + 0)

           a = - 0.7 cos 5t

Answer:

Hay diversas leyes que podemos usar acá.

Acá sabemos que la vejiga aumenta su tamaño al reducir la presión, esto tiene sentido, pues al haber menos presión, hay menos fuerza que comprime la vejiga, lo que le permite aumentar su volumen.

Acá tenemos una relación inversa de la forma: V = K/P

Una relación inversa donde la presión esta en el denominador y K es un termino que no depende ni del volumen ni de la presión.

Entonces, a medida que aumenta P, el denominador aumenta, por lo que el valor del volumen decrece.

Un ejemplo de una ecuación similar es la del gas ideal, por ejemplo, para un gas ideal dentro de un globo de volumen V para una dada presión P:

V = nRT/P

donde n es el numero de moles, R es la constante termodinámica y T es la temperatura, acá podemos ver que esta ecuación tiene la misma forma fundamental que la escrita arriba.

Answer:

B. 0.2 J/g/°C

Explanation:

The solid phase is the first segment (from 0°C to 50°C).

q = mCΔT

200 J = (20 g) C (50°C)

C = 0.2 J/g/°C

Answer:

The position of the particle is 6m

The velocity of the particle is 16 m/s in negative direction

The acceleration of the object is -40 m/s²

Explanation:

Given;

motion of the particle along a straight line as x = 6 + 4t² - t⁴

The position of the object when t = 2s

x = 6 + 4(2)² - (2)⁴

x = 6 + 16 - 16

x = 6m

The velocity of the object when t = 2s

Velocity = dx/dt

dx/dt = 8t - 4t³

when t = 2s

Velocity = 8(2) - 4(2)³

Velocity = 16 - 32

Velocity = -16m/s

Velocity = 16 m/s (in negative direction)

The acceleration of the object when t = 2s

Acceleration = d²x/dt² = 8 - 12t²

Acceleration = 8 - 12 (2)²

Acceleration =  -40 m/s²

Answer: √(L/g)

Explanation:

Here we only work with the units:

The unit of the period is units of time, so we have:

[T] = [s]

Now, the units of the length of the pendulum are units of distance:

[L] = [m]

And the units of the acceleration are:

[g] = [m/s^2]

Now, we want to work with those two in such way that the end result is only in seconds.

First, we can see that in g we have seconds square, so we know that we should use a square root.

Then we can divide L by g in order to remove the distance unit, and to have the time unit in the numerator

[L/g] = [m*s^2/m] = [s^2]

Now we apply the square root:

[√(L/g)] = [√s^2] = [s]

Then the combination is: √(L/g)

T = k*√(L/g)

where k is the constant of proportionality.

Answer: "Surface tension is a film of a liquid caused by the attraction of the particles in the surface layer by the bulk of the liquid, which tends to minimize surface area."

Hope this helps!

Answer:

Explanation:

Surface tension is the property of a liquid surface. It is an effect where the surface of the liquid is strong.

example - small insects can walk on water as they do not have enough weight to penetrate it.

This image might help you

Hope it helps

plz mark as brainliest!!!!!!!

Explanation:

Given that,

Mass of a man, m = 75 kg

(1) We need to find the reading of the weighing machine when the lift is moving upwards with an acceleration of 2 m/s². When the lift is moving upward, reading of the weighing machine is given by :

R = m(g+a)

R = 75 (9.8+2)

R = 885 N

(2) When the lift is moving downwards with a constant velocity of 1.5m/s. It means that the lift is at rest. So, the reading is :

R = mg

R = 75 (9.8)

R = 735 N

(3) When the lift is moving downwards with an acceleration of 2.5 m/s². In this case,

R = m(g-a)

R = 75 (9.8-2.5)

R = 547.5 N

Hence, this is the required solution.