The radioactivity due to carbon-14 measured in a piece of a wooden casket from an ancient burial site was found to produce 20 counts per minute from a given sample, whereas the same amount of carbon from a piece of living wood produced 160 counts per minute. The half-life of carbon-14, a beta emitter, is 5730 years. Thus we would estimate the age of the artifact to be about?

Answers

Answer 1

Answer:

17202.6 years

Explanation:

Activity of the living sample (Ao) = 160 counts per minute

Activity of the wood sample (A) = 20 counts per minute

Half life of carbon-14 = 5730 years

t= age of the artifact

From;

0.693/t1/2= 2.303/t log Ao/A

Then;

0.693/ 5730= 2.303/t log Ao/A

Substituting values;

0.693/5730= 2.303/t log (160/20)

Then we obtain;

1.209×10^-4 = 2.0798/t

t= 2.0798/1.209×10^-4

Thus;

t= 17202.6 years

Therefore the artifact is 17202.6 years old.


Related Questions

is silver malleable because the valence electrons are strongly attracted to the nucleus

Answers

I’m gonna be honest I’m just answering So I could upload my question

The number of molecules in one mole of a substance The number of molecules in one mole of a substance depends on the molecular weight of the substance. depends on the temperature of the substance. depends on the atomic weight of the substance. is the same for all substances. depends on the density of the substance.

Answers

Answer: is the same for all substances.

Explanation:

The number of molecules in one mole of a substance is the same for all substances because

A mole (which is  the quantity of a substance that has the same number (Avogadro's number, is 6.022 * 10^23) of particles as are found in 12.000 grams of carbon-12 of the substance)  for any substance has  the same number of atoms, molecules, or ions contained in any other substance.

1 mole = 6.022 x 10^23 atoms, molecules, or ions

A sample of gas occupies a volume of 120.0mL at a pressure of 0.75atm and a temperature of 295K. What will the volume be at a pressure of 1.25
atm and a temperature of 345K?

A)48mL

B)84mL

C)8mL

D)4mL

Answers

Answer:

A) 84 mL

Explanation:

use general gas equation P1×V1 / T1 = P2×V2/T2

rearrange the formula and solve for V2,it should give you V2= 84mL

Answer:

[tex]\large \boxed{\text{B) 84 mL}}[/tex]

Explanation:

We can use the Combined Gas Laws to solve this problem .

[tex]\dfrac{p_{1}V_{1} }{T_{1}} = \dfrac{p_{2}V_{2}}{T_{2}}[/tex]

Data

p₁ = 0.75 atm; V₁ = 120.0 mL; T₁ = 295 K  

p₂ = 1.25 atm; V₂ = ?;              T₂ = 345 K

Calculations

[tex]\begin{array}{rcl}\dfrac{p_{1}V_{1} }{T_{1}} & = & \dfrac{p_{2}V_{2}}{T_{2}}\\\\\dfrac{\text{0.75 atm $\times$ 120.0 mL}}{\text{295 K}} & = & \dfrac{\text{1.25 atm} \times V_{2}}{\text{345 K}}\\\\\text{0.305 mL} & = & \text{0.003 523V}_{2}\\V_{2}& =& \dfrac{\text{0.305 mL}}{0.003523}\\\\& = & \textbf{84 mL}\\\end{array}\\\text{The new volume of the gas is $\large \boxed{\textbf{84 mL}}$}[/tex]

cis-1-Bromo-4-tert-butylcyclohexane and trans-1-bromo-4-tert-butylcyclohexane both react with sodium ethoxide in ethanol to form 4-tert-butylcyclohexene. Explain why the cis isomer reacts much more rapidly than the trans isomer. Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

Answers

Answer:

See explanation below

Explanation:

In order to explain this, is neccesary to draw both confomers, the cis and trans, but in the chair conformation, because in that way we can see much better the bonds and the reason of why the cis reacts faster than trans.

As you can see in picture attached, the more stable conformer is the one where the H and Br are in the axial position, and the tert butyl group in equatorial position. In these positions, the cis isomer can undergo an E2 reaction, and the ethoxide would have no problem to substract the hydrogen atom from the molecule to eliminate the Bromide. This is because the t-butyl group in equatorial position, is not exerting steric hindrance, therefore is faster.

In the case of the trans, the t-butyl group is in the axial position as well as the hydrogen and bromide, therefore, when the E2 reaction undergoes, the hydrogen is substracted by ethoxide, but it will be slow because the t.butyl group exerts steric hindrance in the axial positions, therefore, the hydrogen will be substracted slower than in the cis position. This is the main reason for the cis to be faster.

As for the second part of the question, which will be the answer of the whole question, see picture attached 2 for the whole sentence, and the match of the words is the following:

1. Axial

2. More

3. Blank (No word there)

4. less

5. Blank

6. Cis

7. Trans

8. Cis

dentify the missing information for each atom or ion. Note that the atoms and ions are not necessarily neutral. A Se ion has a mass number of 78 and a charge of −2 . Determine the number of neutrons, protons, and electrons in this ion. number of neutrons: 44 number of protons: 34 number of electrons: 36 An ion has a mass number of 65, 36 neutrons, and a charge of +1 . Identify the element symbol, and determine the number of protons and electrons in this ion. element symbol: Cu number of protons: 30 number of electrons: 29 An atom or ion has 43 neutrons , 36 protons, and 36 electrons. Identify the element symbol, and determine the mass number and charge for this atom or ion. element symbol: Au mass number: 79 charge: 0

Answers

Answer:

Check the explanation

Explanation:

1)

Atomic number of Se = 34

So, number of proton = 34

use:

charge = number of proton - number of electron

-2 = 34 - number of electron

number of electron = 36

number of neutron = mass number - atomic number

= 78 - 34

= 44

Answer:

44

34

36

2)

number of proton = mass number - number of neutron

= 65 - 36

= 29

29 is atomic number for Cu

use:

charge = number of proton - number of electron

+1 = 29 - number of electron

number of electron = 28

Answer:

Cu

29

28

3)

Atomic number is 36 for Kr

use:

charge = number of proton - number of electron

= 36 - 36

= 0

use:

mass number = number of proton + number of neutron

= 36 + 42

= 78

Answer:

Kr

78

0

10. When the pressure on a gas inetcases three times, by how much will the volume incrcase or decrease?

Answers

Answer:The answer to this question comes from experiments done by the scientist Robert Boyle in an effort to improve air pumps. In the 1600's, Boyle measured the volumes of gases at different pressures. Boyle found that when the pressure of gas at a constant temperature is increased, the volume of the gas decreases. when the pressure of gas is decreased, the volume increases. this relationship between pressure and volume is called Boyle's law.

Explanation: So, at constant temperature, the answer to your answer is: the volume decreases in the same ratio as the ratio of pressure increases.

BUT, in general, there is not a single answer to your question. It depend by the context.

For example, if you put the gas in a rigid steel tank (volume is constant), you can heat the gas, so provoking a pressure increase. But you won't get any change in volume.

Or, if you heat the gas in a partially elastic vessel (as a tire or a soccer ball) you will get both an increase of volume AND an increase of pressure.

FINALLY if you inflate a bubblegum ball, the volume will be increased without any change in pressure and temperature, because you have increased the NUMBER of molecules in the balloon.

There are many other ways to change volume and pressure of a gas that are different from the Boyle experiment.

methane Express your answer as a condensed structural formula omitting all bonds (e.g CH3CH2CH3). nothing Request Answer Part B ethane Express your answer as a condensed structural formula omitting all bonds (e.g CH3CH2CH3). nothing Request Answer Part C pentane Express your answer as a condensed structural formula omitting all bonds (e.g CH3CH2CH3). nothing Request Answer Part D cyclopropane Draw the molecule on the canvas by choosing buttons from the Tools (for bonds), Atoms, and Advanced Template toolbars. Include all hydrogen atoms.

Answers

Answer:

a

 The condensed structural formula for methane is

            [tex]CH_4[/tex]

b

 The condensed structural formula for ethane is

           [tex]CH_3 CH_3[/tex]

c

  The condensed structural formula for pentane is  

            [tex]CH_2(CH_2)_3CH_3[/tex]

d

   The diagram for the structural formula for cyclopropane is shown on the first uploaded image

Explanation:

Each of the the 11 body systems:

A) Are interchangeable
B) Depends on others to function
C) Performs a single task
D) Is controlled by the lungs

Answers

Answer:

Depends on others to function

Explanation:

B)Depends on others to function

Metamorphic rocks directly form from

Answers

Answer:

Metamorphic rocks are formed from pre-existing rock and sediment materials. They are formed when igneous, sedimentary, or other pre-existing metamorphic rocks are exposed to the heat and pressure as well as super-heated mineral-rich fluids. They are compacted together to form a new rock altogether. Metamorphism does not include the melting or liquefaction of the pre-existing rock. Instead, it compacts them and crushes them, pushing them together at extreme heat and pressure to form a new rock altogether composed of sedimentary, igneous, and other metamorphic rock. It's the rock hybrid of the geologic world.

Metamorphism is similar to when you squish playdough together, it doesn't form a new playdough color (unless you REALLY mixed that poor playdough together). It forms an amalgamation of different colors and patterns made from the other rock.

Taken from a paper I once wrote I explained this again:

"Metamorphic rocks are formed when pre-existing rocks and their minerals are compressed and altered by Earth’s internal processes; interior pressure, temperature (heat), and chemical reactions. The minerals and pre-existing rock necessary for the creation of metamorphic rock must then also be located deep underground if such processes are expected to make an impact and create a metamorphic rock."

When a gas particle changes phase into a liquid particle:

A. the particle loses energy
B. the particle gains energy
C. the particle has no change in energy
D. the change in energy depends on the type of gas

Answers

Answer:B

Explanation:

The movement in particles is faster than the particle movement in a solid and the attractive forces are much weaker.A gas is something with no definite volume and no definite shape. Gas particles are far apart and move rapidly and freely. The attractive forces between gas particles are very weak or absent.When a liquid is heated, the particles are given more energy. They start to move faster and further apart. At a certain temperature, the particles break free of one another and the liquid turns to gas. This is the boiling point.Particles in gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. Solid are tightly packed, usually in a regular pattern.

Free radical mono-halogenation of an alkane is typically conducted using bromine versus chlorine because A.the bromine radical is more reactive and therefore more selective. B.the chlorine radical is more reactive and therefore more selective. C.the chlorine radical is less reactive and therefore more selective. D.the bromine radical is less reactive and therefore more selective. E.none of these choices.

Answers

Answer:Free radical mono-halogenation of an alkane is typically conducted using bromine versus chlorine because the bromine radical is less reactive and therefore more selective.

Explanation: Halogenation occurs when a halogen replaces  one or more hydrogen atoms in an organic compound ie  chlorine or  bromine with the reactivity of the halogens decreasing  in the order of  F2 > Cl2 > Br2 > I2

Since fluorine reacts  explosively making it is difficult to control, and iodine is unreactive. Free radical mono-halogenation of an alkane is typically conducted using bromine versus chlorine  with Chlorination  ie chlorine radical being more reactive and not selective and the Bromination of alkanes ie bromine radical  occurring similarly but slower and less reactive but  more selective which is due to the fact that a bromine atom is less reactive in  the hydrogen abstraction  than a chlorine atom evidence in the  higher bond energy of H-Cl than H-Br.

Problem PageQuestion Sulfur dioxide and oxygen react to form sulfur trioxide during one of the key steps in sulfuric acid synthesis. An industrial chemist studying this reaction fills a 500. mL flask with 1.3 atm of sulfur dioxide gas and 4.1 atm of oxygen gas, and when the mixture has come to equilibrium measures the partial pressure of sulfur trioxide gas to be 0.91 atm. Calculate the pressure equilibrium constant for the reaction of sulfur dioxide and oxygen at the final temperature of the mixture. Round your answer to 2 significant digits.

Answers

Answer:

SO₂: 0.39atm

O₂: 3.645atm

Explanation:

Based on the reaction:

2 SO₂(g) + O₂(g) → 2 SO₃(g)

2 moles of sulfur dioxide react per mole of oxygen to produce 2 moles of sulfur trioxide.

When the reaction occurs an comes to equilbrium, the partial pressure of each gas is:

SO₂: 1.3atm - 2X

O₂: 4.1atm -X

SO₃: 2X

Where X is the reaction coordinate.

As pressure at equilibrium of SO₃ is 0.91 atm:

0.91atm = 2X

Thus: X = 0.455atm.

Replacing, pressures at equilibrium of the gases are:

SO₂: 1.3atm - 2×0.455atm = 0.39 atm

O₂: 4.1atm -0.455atm = 3.645 atm

Gaseous butane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 42. g of butane is mixed with 150. g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.

Answers

Answer:

127 grams of carbon dioxide

Explanation:

We need to determine the chemical equation first. Butane has a chemical formula of [tex]C_4H_{10}[/tex], oxygen is [tex]O_2[/tex], carbon dioxide is [tex]CO_2[/tex], and water is [tex]H_2O[/tex]. The reactants are butane and oxygen and the products are carbon dioxide and water. So we write:

[tex]C_4H_{10}+O_2[/tex] ⇒ [tex]CO_2+H_2O[/tex]

But remember! We need to balance this. Currently, there are 4 carbon atoms (C), 10 hydrogen atoms (H), and 2 oxygen atoms (O) on the left, while there are 1 carbon atom (C), 2 hydrogen atoms (H), and 3 oxygen atoms (O) on the right. Let's place a coefficient of 4 in front of the carbon dioxide and a coefficient of 5 on the water, so that we have equal numbers of carbon and hydrogen atoms on each side:

[tex]C_4H_{10}+O_2[/tex] ⇒ [tex]4CO_2+5H_2O[/tex]

However, we need to ensure that there are equal numbers of O atoms, as well. On the left, we have 2 and on the right we have 13, so let's put a coefficient of 6.5 on the oxygen:

[tex]C_4H_{10}+6.5O_2[/tex] ⇒ [tex]4CO_2+5H_2O[/tex]

Finally, multiply everything by 2 to get whole number coefficients:

[tex]2C_4H_{10}+13O_2[/tex] ⇒ [tex]8CO_2+10H_2O[/tex]

Ah, now we can actually get to the problem!

We need to determine the limiting reactant, so let's convert the 42 g of butane and 150 g of oxygen into moles of any product, say, carbon dioxide. To convert to moles, we need to find the molar mass of each compound.

The molar mass of butane is 4 * 12.01 + 10 * 1.01 = 58.14 g/mol, while the molar mass of oxygen is 2 * 16 = 32 g/mol. We can now set up the equations:

[tex]42 gC_4H_{10}*\frac{1molC_4H_{10}}{58.14gC_4H_{10}} *\frac{8molCO_2}{2molC_4H_{10}} =2.8896molCO_2[/tex]

[tex]150 gO_2*\frac{1molO_2}{32gO_2} *\frac{8molCO_2}{13molO_2} =2.8846molCO_2[/tex]

Clearly, we see that 2.8846 < 2.8896, which means that oxygen is the limiting reactant. In other words, the most products can be made when the oxygen is all used up.

Now let's finally convert moles of carbon dioxide into grams by multiplying by its molar mass, which is 12.01 + 2 * 16 = 44.01 g/mol:

[tex]2.8846molCO_2*\frac{44.01gCO_2}{1molCO_2} =127gCO_2[/tex]

Notice that we have 3 significant figures because we had 3 significant figures at the start with 150. grams of oxygen.

~ an aesthetics lover

What will happen if ultraviolet light shines on metal

Answers

Answer:

if this doesnt help then im sorry...

Explanation:

When light is shined on certain metals, electrons may be knocked off the metal. This is called the photoelectric effect. By assuming that light is quantized, Einstein was able to explain the photoelectric effect. ... When UV light of a long wavelength and low frequency is shined on the zinc nothing happens.

Ah yay! Something I can answer.

Answer:

When UV light is shined upon certain metals something called the photoelectric effect occurs. The photoelectic effect is when electrons are discharged from the metal.

Explanation:

Metals contain many electrons and when the electrons are given enough energy they can leave the metal. The electrons that escape the metal are called photoelectrons; hence why this effect is called the photoelectic effect.

The image shows two different species. the image is a dog and a lizered
Which is a shared characteristic of these two species?
tail
scales
hair
body shape

Answers

Answer:

the tail

Explanation:

Answer:

A.) tails

Explanation:

Question 1 of 10
2 Points
An engineering team is conducting a wind tunnel test to examine the
aerodynamics of a car it has designed. Which part of the engineering process
is the team in?
O A. Do the work.
O B. Evaluate the results.
O C. Improve and redesign.
D. Identify a need.
SUBMIT​

Answers

Explanation:

Evaluate the results, letter B

If you have 67.31g of CH4, how many moles do you have?

Answers

Answer:

If you have 67.31 g of CH₄, you have 4.21 moles

Explanation:

To know the amount of moles if you have 67.31 g of CH₄, you must know the molar mass, that is, the mass of one mole of a substance, which can be an element or a compound.

On the periodic table, the molar mass of the elements, also called the atomic mass or atomic weight, can be found at the bottom of the element. In this case:

C: 12 g/moleH: 1 g/mole

To calculate the molar mass of a compound, the molar mass of the elements of the compound must be added multiplied by the times they appear. So in this case the molar mass of CH₄ is:  

CH₄= 12 g/mole + 4* 1 g/mole= 16 g/mole

Now you can apply the following rule of three: if 16 g are contained in 1 mole of CH4, 67.31 g in how many moles are present?

[tex]moles=\frac{67.31 g*1 mole}{16 g}[/tex]

moles= 4.21

If you have 67.31 g of CH₄, you have 4.21 moles

Common additives to drinking water include elemental chlorine, chloride ions, and phosphate ions. Recently, reports of elevated lead levels in drinking water have been reported in cities with pipes that contain lead, Pb(s). When Cl2(aq) flows through a metal pipe containing Pb(s), some of the lead atoms oxidize, losing two electrons each, and aqueous chloride ions form. (a) Write a balanced, net-ionic equation for the reaction between Pb(s) , and Cl2(aq).

Answers

Answer:

See explaination

Explanation:

Balanced net ionic reaction.

Pb(s) + Cl2(g) ----- Pb2+ + 2Cl-

oxidation reaction :Pb(s) --- Pb2+ + 2e-

Reduction reaction:Cl2 + 2e- -----Cl-

You have 0.00891 g of platinum. What is this in micrograms?

Answers

It would be 8910 micrograms.

1. A substance that gets dissolved to create a solution is best described as to
as

Answers

Answer:

Solute

Explanation

A substance that gets dissolved to create a solution is best described as to as

Draw the structure of a compound with the molecular formula CgH1002 that exhibits the following spectral data.
(a) IR: 3005 cm-1, 1676 cm-1, 1603 cm-1
(b) H NMR: 2.6 ppm (singlet, I = 3H), 3.9 ppm (singlet, I = 3H), 6.9 ppm (doublet, I = 2H), 7.9 ppm (doublet, I = 2H)
(c) 13C NMR: 26.2, 55.4, 113.7, 130.3, 130.5, 163.5, 196.6 ppm ?

Answers

Answer:

The answer you are looking for is A

PLEASEEEE help! BRAINLIEST to right answer!!!!

Answers

Answer:

D

Explanation:

No energy is lost during transforming into another because energy cannot be reated or destroyed

Answer:

i think is d

Explanation:

I'm not sure wait for a few more answers

What amount of heat will raise the temperature of 78g liquid water from 20 C to 80 C?

Answers

Answer:

19656J

Explanation:

Step 1:

Data obtained from the question.

Mass (M) = 78g

Initial temperature (T1) = 20°C

Final temperature (T2) = 80°C

Change in temperature (ΔT) = T2 – T1 =

80°C – 20°C = 60°C

Specific heat capacity (C) = 4.2J/g°C

Heat (Q) =...?

Step 2:

Determination of the heat required for the reaction.

Q = MCΔT

Q = 78 x 4.2 x 60

Q = 19656J

Therefore, 19656J of heat is required.

Calculate the pH of a [0.000765) M solution of KOH

Answers

Answer:

pH=10.88

Explanation:

Hello,

In this case, since potassium hydroxide is completely dissociated as shown below:

[tex]KOH\rightarrow K^++OH^-[/tex]

For which we understand it is a base, more specifically, a strong base; it means that the concentration of the OH⁻ equals the concentration of the potassium hydroxide, that is 0.000765M, for that reason we can directly compute the pOH:

[tex]pOH=-log([OH^-])=-log(0.000765)=3.12[/tex]

Finally, since the pOH and the pH are related by:

[tex]pOH+pH=14[/tex]

The pH turns out:

[tex]pH=14-3.12\\pH=10.88[/tex]

Best regards.

A student conducts an experiment to see how music affects plant growth. The student obtains four identical plants. Each one is potted in the same type of soil and receives the
same amount of sunlight and water each day. Plant A listens to classical music for three hours each day. Plant B listens to rock music for three hours each day. Plant C listens to
country music for three hours each day. Plant D does not listen to any music at all.

2. Based on the experiment in the scenario, which visual aid would be most helpful in showing the change in the plants' heights over time?
O A. A timeline
OB. A line graph
OC. A pie chart
D. A bar graph

Answers

Answer:

The type of music each plant listens to.

Explanation:

A variable is any factor or condition whose value is changing in an experiment. A variable can occur in different types or quantity, and three types of variable (independent, dependent, and controlled) can be found in an experiment. In the experiment described above, "the type of music each plant listens to" is the variable. It is an independent variable whose value is changing because it exists in different types and it is the one that the student is observing its effect on the plant’s growth. In this experiment, this variable which differ will also produce different results (or effects).

If 120.4 grams of reactant completely breaks down (decomposes) to produce 106.4 grams of chlorine. What mass of nitrogen gas could be expected? *

Answers

Answer:

[tex]m_{nitrogen}=14g[/tex]

Explanation:

Hello,

In this case, since we are talking about a chemical reaction in which a compound having nitrogen and chlorine is decomposed into chlorine and nitrogen, we must remember that the law of conservation of mass must be obeyed, for that reason, we notice that the mass of the whole reactants must equal the mass of the whole products, as shown below:

[tex]m_{reactants}=m_{products}[/tex]

Next, we know there is only one single reactant and products are constituted by both chlorine and nitrogen:

[tex]m_{reactant}=m_{chlorine}+m_{nitrogen}[/tex]

In such a way, we can compute the mass of nitrogen as shown below:

[tex]m_{nitrogen}=m_{reactant}-m_{chlorine}=120.4g-106.4g\\\\m_{nitrogen}=14g[/tex]

Best regards.

Indicate the changes (increases, decreases, does not change) in its volume when the pressure undergoes the following changes at constant temperature and amount of gas. Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer. ResetHelp 1. The pressure increases to 6.0 atm. The volume The pressure increases to 6.0 a t m. The volume blank.. 2. The pressure drops to 0.40 atm. The volume The pressure drops to 0.40 a t m. The volume blank.. 3. The pressure remains at 2.0 atm. The volume The pressure remains at 2.0 a t m. The volume blank..

Answers

The question is missing information. Here is the complete question.

A gas at a pressure of 2.0 atm is in a closed container. Indicate the changes (if any) in its volume when the pressure undergoes the following changes at constant temperature and constant amount of gas. Match the words in the left with the column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

1. The pressure increases to 6.0 atm. The volume ________

2. The pressure drops to 0.40 atm. The volume _________

3. The pressure remains at 2.0 atm. The volume _________

Answer: 1. Decreases

2. Increases

3. Does not change

Explanation: According to the Ideal Gas Law, Pressure, Volume and Temperature of an ideal gas is related, as the following: PV = nRT.

In this case, since temperature (T) and amount of gas (n) are constant, the Boyle's Law can be used.

The law states that the volume of a given gas, under the conditios of temperature and amount of it are constant, is inversely proportional to the applied pressure: P₁.V₁ = P₂.V₂

For case 1.)

Initial P (P₁) = 2

Initial V (V₁) = V

Final P (P₂) = 6

P₁.V₁ = P₂.V₂

2.V = 6.V₂

V₂ = 1/3V

When the pressure increases to 6 atm, volume decreases by 1/3.

For case 2.)

P₁ = 2

V₁ = V

P₂ = 0.4

2.V = 0.4V₂

V₂ = 5V

When pressure drops to 0.4 atm, volume increases by 5.

For case 3.)

Since there are no change in the pressure, the volume is the same from the beginning, so does not change.

what is the percent composition of muscovite mica. Its chemical formula is
(KF)2(Al2O3)3(SiO2)6(H2O)

Answers

Answer:

[tex]\boxed{\text{0.25 \% H, 43.96 \% O, 4.75 \% F, 20.22 \% Al, 21.05 \% Si, 9.77 \% K}}[/tex]

Explanation:

The oxide formula is (KF)₂(Al₂O₃)₂(SiO₂)(H₂O).

Rewrite it as a molecular formula — H₂O₂₂F₂Al₆Si₆K₂

The formula for the mass percent of an element is

[tex]\text{Mass \%} = \dfrac{\text{mass of element}}{\text{mass of compound}} \times 100 \, \%[/tex]

We can set up a table to calculate the percent of each element.

[tex]\begin{array}{rrrrr}\textbf{Atom} & \textbf{No.} &\textbf{MM/u} & \textbf{Mass/u} & \mathbf{\%} \\\text{H} & 2& 1.01 & 2.02& 0.25 \\\text{O} &22 & 16.00 & 351.98 & 43.96 \\\text{F} & 2 & 19.00 & 38.00 & 4.75 \\\text{Al} & 6 & 26.98 & 161.89 & 20.22 \\\text{Si} & 6 & 28.08 & 168.51 & 21.05 \\\text{K} & 2 & 39.10 & 78.20 & 9.77 \\& & \text{TOTAL =} & \mathbf{800.60} & \mathbf{100.00} \\\end{array}\\[/tex]

[tex]\text{The percent composition of muscovite mica is}\\ \boxed{\textbf{0.25 \% H, 43.96 \% O, 4.75 \% F, 20.22 \% Al, 21.05 \% Si, 9.77 \% K}}[/tex]

Scoring: Your score will be based on the number of correct matches minus the number of incorrect matches. There is no penalty for missing matches. Use the References to access important values if needed for this question. Indicate whether each of the following compounds will gave an acidic, basic or neutral solution when dissolved in water.

1. ammonium bromide
2. potassium cyanide
3. sodium chloride
4. potassium iodide

Answers

Answer:

Explanation:

1 ) Ammonium bromide is a salt of ammonium hydroxide and hydrogen bromide . The former is a weak base and the later is a strong acid so the salt will make acidic solution in water. It happens due to salt hydrolysis.

2 ) Potassium cyanide is  salt of potassium hydroxide and hydrogen cyanide . The former is strong base and the later is weak acid so its salt will be basic in nature .

3 ) sodium chloride is a salt of sodium hydroxide and hydrogen chloride . The former is strong base and later is strong acid. So the salt is neutral .

4 ) Potassium iodide is a salt of potassium hydroxide and hydrogen iodide . The former is a strong base and the later is a strong acid . So the salt is neutral or a bit basic.

Anatom that has lewer neutrons than protons and more electrons than protons is

Answers

Answer:

a negative ion, and an isotope.

Explanation:

The perfect atom consists of an equal balance in all 3. If the neutrons are not even with the protons, it is an isotope since it is like another version of the so called (but not actually) 'perfect' atom. If there is more electrons, the charge is negative, making it an ion.

Other Questions
what is the 15th n term of the sequence 22 18 14 10 6 True or false Writing a check on an account with insufficient funds is allowed under certain conditions? Which of the following is a restriction to free speech?Digital mediaPlagiarismLibel and slanderOpen source A car is going 60.0 mi/h and has to stop in 6.0 seconds. What is the cars acceleration? (-4, -5) (3, 4) Slope: (0, -2) (5, -1) Slope: (-5, -1) (5, -3) Slope: (-5, -5) (-1, 5) Slope: (-2, 0) (4, 1) Slope: I WILL GIVE BRANLIEST NameDateFlocabularyRay's WayUse the text to answer each question below.1. Mo walked through thethinking that there had to be some mistake. It just wahouse like this from a relative he hardly knew. Of course,liked him, but this much?oms, Staring up at the detailed windows and walls. He couldn't helpve some mistake. It just wasn't conventional for a fourteen-year-old to inherit ahardly knew. Of course, he knew that his Aunt Josephine had alwaysChoose the word that best fills in the blank.A. deceptiveC. ornateB. bountifulD. sublime2 Mo looked around the benci ngbetong inlaid with gold fabric. He Vicked off his shoes and !!!!HELP PLS!!!! 19 POINTSIn equation y=15x+12, what is the 15? *In equation y=15x+12, what is the 12? *How would you create a table of values for the equation y=15x+12? * Which of the following groups became more active in politics during the Civil War? Will give brainliest NGL5. On page 25, Katie says:And now I notice there are all these leaves on the verandamy mom didnt sweep todayand I realize something was different about her study tonight. The desk was a mess. A wonderful mess! Especially with my dads family evacuation plan sitting right in the middle of it all.What is Katie excited about at this moment? I AM GIVING BRAINLIESTA pan has an original price of $32 but is marked down by 15 percent. Which equation shows the new price of the pan? Which theory states that deviance results not only from what people do, but also from how others respond to those actions?A. strain theoryB. labeling theoryC. differential association theoryD. control theoryE. conflict theory The figure shows the front side of a purse in the shape of a trapezoid.What is the area of this trapezoid?110 in121 in130 in220 in Solve the problem in the image above s= ut + 1/2 at x2u=10a=-2t=1/2 work out the value of s QUESTION 4Terms such as "your, our, and their" are calleda. Third PersonO b. Second Personc. Personal PronounsOd.Possessive Pronouns Which image illustrates the bending of a wave around the edge of anobstacle? the radius of a circle with a circumstance of 28 pie into units What is the symbol for the entity that has 17 protons, 20 neutrons, and 18 electrons? Alicia created a physical model to show how one of the human body systems works. She first adds sand and pebbles to a glass of water. Then, she uses filters to separate the solids from the water.Which organ(s) serve(s) a similar function in the human body?A)the heartB)the glandsC)the kidneysD)the stomach find out three rational numbers lying between 2/3 and 3/4PLEASE HELP...... I NEED TO SUBMIT IT NOW......