Answer:
$3,855
Explanation:
Calculation to determine the total equivalent units for conversion costs
Whole Units Percent conversion added in period Equivalent units for Conversion
Inventory in process , beginning
200 40% (100-60%) 80 (200*40%)
Started and completed in October
3,700 100% 3,700 (3,700*100%])
Transferred out of rolling 3,900 $0 $0
Inventory in process, Ending 300 25% 75 (300*25%)
Total Equivalent units for conversion $3,855
(80+3,700+75)
Workings:
Calculation to determine the Started and completed
Using this formula
Started and completed = Total completed - Beginning inventory
Let plug in the formula
Started and completed= 3,900 - 200
Started and completed = 3,700
Therefore the total equivalent units for conversion costs is $3,855
Monroe Minerals Company purchased a copper mine for $122,000,000. The mine was expected to produce 50,000 tons of copper over its useful life. During Year 1, the company extracted 6,400 tons of copper. The copper was sold for $4,900 per ton. Assume that the company incurred $8,540,000 in operating expenses during Year 1. Based on this information, how much net income would Monroe report in Year 1?
Answer:
Your answer is given below:
Explanation:
Depletion cost per ton
= 122,000,000/50,000 tons = 2,440 per ton
Cost of copper sold = 6,400 tons*2,440 = 15,616,000
Sales = 6,400 tons*4,900 = 31,360,000
Net income = Sales - Cost of copper sold - Operating expenses
= 31,360,000 - 15,616,000 - 8,540,000
= $7,204,000
Determine whether an observational or experimental study is appropriate to address the following statement.
A gas station owner wants to find out whether customers are satisfied with the service they receive.
Answer:
Observational study
Explanation:
The appropriate study for a gas station owner who wants to find out whether customers are satisfied with the service they receive or not is "Observational Study."
Given that the Observational study is a type of research study or scientific investigation in which the researcher observes the effect of an action or activities such as risk factors, or outcomes without a direct impact on the intervention from the researcher.
In this case, the satisfaction of customers concerning the services they receive can only be observed by the researcher without influencing the services or how the customers perceived their level of satisfaction.
What is the importance of desert in a meal?
Answer:
To enhance human satisfaction after taking a meal and makes up for low blood sugar
Explanation:
The importance of desserts in a meal cannot be overstated. One of which is "to enhance human satisfaction after taking a meal and makes up for low blood sugar."
This is simply because desserts are sweet courses usually taken at the end of a meal. They have a high quantity of sugar. Also, sugar or sugary foods have been confirmed to enhance people's mood as it is believed it elevates happiness hormones.
Process Costing Tempe Manufacturing Company makes a single product that is produced on a continuous basis in one department. All materials are added at the beginning of production. The total cost per equivalent unit in process in March 2009 was $4.60, consisting of $3.00 for materials and $1.60 for conversion. During the month, 9,300 units of product were transferred to finished goods inventory; on March 31, 2,500 units were in process, 10 percent converted. The company uses weighted average costing.
(a) Determine the cost of goods transferred to finished goods inventory.
(b) Determine the cost of the ending work-in-process inventory.
(c) What was the total cost of the beginning work-in-process inventory plus the current manufacturing costs?
Answer:
a. $42,780
b. $7,900
c. $50,680
Explanation:
Cost of goods transferred to finished goods inventory.
Total Cost = Total unit Cost x Units Transferred
= $4.60 x 9,300 units
= $42,780
Cost of the ending work-in-process inventory
Total Cost = Material Cost + Conversion Cost
= ($3.00 x 2,500) + ($1.60 x 2,500 x 0.10)
= $7,500 + $400
= $7,900
Total cost of the beginning work-in-process inventory plus the current manufacturing costs
This amount equals the sum of Cost of goods transferred to finished goods inventory and Cost of the ending work-in-process inventory.
Thus,
Total Cost = $42,780 + $7,900
= $50,680
The estimated factory overhead cost for a Co. is $1750000 for the year. Direct labor hours are estimated to be 500000. Determine: SHOW ALL WORK a. Predetermined factory overhead rate. $ b. Determine the factory overhead applied assume the actual direct labor hours for Job 50 was. 20000 and for J0b 51 was 24000 . c. Determine the balance in the factory overhead account assuming that the actual cost incurred was $153000. d. Over or under-applied
Answer:
Results are below.
Explanation:
To calculate the predetermined manufacturing overhead rate we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 1,750,000 / 500,000
Predetermined manufacturing overhead rate= $3.5 per direct labor hour
Now, we can allocate overhead to Job 50 and 51:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Job 50:
Allocated MOH= 3.5*20,000
Allocated MOH= $70,000
Job 51:
Allocated MOH= 3.5*24,000
Allocated MOH= $84,000
Finally, the under/over applied overhead:
(We weren't provided with enough information)
Under/over applied overhead= real overhead - allocated overhead
Determine: SHOW ALL WORK a. Predetermined factory overhead rate. $ b. Determine the factory overhead applied assume the actual direct labor hours for Job 50 was. 20000 and for J0b 51 was 24000 . $ c. Determine the balance in the factory overhead account assuming that the actual cost
Answer:
Note See complete question as attached as picture below
a. Predetermined factory overhead rate = Estimated factory overhead cost / Direct labr hours
Predetermined factory overhead rate = $1,750,000 / 500,000 hours
Predetermined factory overhead rate = $3.50 per direct labor hours
b. Particulars Amount
Job 50 (20,000*3.50) $70,000
Job 51 (24,000*3.50) $84,000
Factory overhead applied $154,000
c. Balance in factory overhead = $154,000 - $153,000
Balance in factory overhead = $1,000
d. Over-applied factory overhead = $1,000
The Taylor Rule specifies that the federal funds rate target should be equal to:_________ a) equilibrium federal funds rate + inflation rate +1 b) interest rate - expected inflation rate. c) 1.5 (inflation rate) + 0.5 (GDP gap) + 1. d) 0.5 (inflation rate) +1.5 (GDP gap) + 1
Answer:A
Explanation:The Taylor Rule specifies that the federal funds rate target should be equal to O equilibrium federal funds rate + inflation rate +1 interest rate - expected inflation rate. 1.5 (inflation rate) + 0.5 (GDP gap) + 1. 0.5 (inflation rate) +1.5 (GDP gap) + 1
Sandhill Inc. acquired 10% of the 420,000 shares of common stock of Schuberger Corporation at a total cost of $15 per share on June 17, 2020. On September 3, Schuberger declared and paid a $120,000 dividend. On December 31, Schuberger reported net income of $512,000 for the year. (b) Wen Corporation obtained significant influence over Hunsaker Company by buying 30% of Hunsaker’s 112,000 outstanding shares of common stock at a cost of $18 per share on January 1, 2017. On May 15, Hunsaker declared and paid a cash dividend of $112,000. On December 31, Hunsaker reported net income of $212,000 for the year.
Required:
Prepare all necessary journal entries for 2017 for (a) Edelman and (b) Wen.
Answer:Please see explantion colmn for answers
Explanation:
A) Journal entry for Edelman
Date Account Titles and explanation Debit Credit
June 17 Stock investment $630,000
Cash $630,000
Calculation
Stock Investment =420,000 x $15 x 10% = $630,000
Date Account Titles and explanation Debit Credit
Sept 3 Cash $12,000
Dividend revenue $12,000
Calculation
Dividend revenue =$120,000 x 10% =$12,000
Date Account Titles and explanation Debit Credit
Dec 31 Stock investment $51,200
Investment revenue $51,200
Calculation
Investment Revenue =(512,000 x 10%) = 51,200
B) Journal entry for Wen
Date Account Titles and explanation Debit Credit
Jan 1 Stock investment $604,800
Cash $604,800
Calculation
Stock Investment =112,000 x $18 x 30% = $604,800
Date Account Titles and explanation Debit Credit
May 15 Cash $33,600
Dividend revenue $33,600
Calculation
Dividend revenue =112,000 x 30% = $33,600
Date Account Titles and explanation Debit Credit
Dec 31 Stock investment $63,600
Investment revenue $63,600
Calculation
Stock Investment =212,000 x 30% = $63,600
plz help me i cant fail this class
In order to produce a new product, a firm must lease equipment at a cost of $100,000 per year. The managers feel that they can sell 50,000 units per year at a price of $75. What is the highest variable cost that will allow the firm to at least break even on this project
Answer:
$73 = unitary variable cost
Explanation:
To calculate the unitary variable cost that will yield the break-even point, we need to use the following formula:
Break-even point in units= fixed costs/ contribution margin per unit
50,000= 100,000 / (75 - unitary variable cost)
3,750,000 - 50,000unitary variable cost= 100,000
3,650,000 = 50,000unitary variable cost
$73 = unitary variable cost
Find a company offering different products and discuss what the company did to retain its customers under particular circumstances.
Answer:
Explanation:
Consider Samsung, a global leader in electronic goods such as the Galaxy brand of smartphones, laptops, and home appliances, among others. A sector of Samsung Company known as Samsung C&T Fashion Group offers a variety of items to clients, including apparel and athletics.
What the company did to keep its consumer in a certain situation. Most regions of the world, as well as companies and business owners, have been affected by the recent COV-ID epidemic along with those in line of clothes and athletics. Samsung saw this and they began selling facial masks to protect clients from the viral infection, allowing the company to retain customers and boost its customer retention rate.
As a result, a few of their companies began producing UV sterilizers particularly for cleaning mobile devices in order to reduce the possibility of the virus spreading through mobile phones.
Which set of items appears on the loan estimate
Two alternatives for a construction project are being considered. Both projects have a 5-year life. Alternative A's initial cost is $2,260 and yields $355 annually for 5 years. Alternative B initially costs $5500 and yields $1,250 annually for 5 years. The rate of return on the difference between the alternatives is approximately
Answer:
The rate of return on the difference between the alternatives is approximately 38.12%.
Explanation:
Alternative A's initial cost = $2,260
Alternative A's total yields for 5 years = $355 * 5 = $1,775
Alternative B's initial cost = $5,500
Alternative B's total yields for 5 years = $1,250 * 5 = $6,250
Difference between initial costs of A and B = Alternative B's initial cost - Alternative B's initial cost = $5,500 - $2,260 = $3,240
Difference between total yields for 5 years of A and B = Alternative B's total yields for 5 years - Alternative A's total yields for 5 years = $6,250 - $1,775 = $4,475
Rate of return on the difference between the alternatives = (Difference between total yields for 5 years of A and B - Difference between initial costs of A and B) / Difference between initial costs of A and B = ($4,475 - $3,240) / $3,240 = 0.3812, or 38.12%
Therefore, the rate of return on the difference between the alternatives is approximately 38.12%.
what kind of business
Alex managers a team of several professional. He is cognizant that he needs to be aware of how stress might present in his workforce. Alex should be on the lookout for...A. employees that take a new job.B. employees who decline their health care benefits.C. employees who get sick a handful of times each year.D. employees who are paid less than their peers.E. employees that experience headaches, back discomfort, and migraines.
Answer:
The correct answer is E.
Explanation:
The correct option is E.
Alex should be wary of employees that experience headaches, back discomfort, and migraines or even depressed people.
Stress makes us respond to pressure be it physical or emotional one. Stress at home or workplace can increase ones blood pressure.
So potential employees or current ones that have headache, migraine or back discomfort are susceptible to stress.
How would you explain to a skeptical bank manager why the socially optimal number of bank robberies is not zero
Answer:
The socially optimal number of bank robberies is not equal zero because due to the presence or the possibility of robberies in Banks, some industries will be sustained and such industries are ; Security agencies and their personnel , Insurance companies, Vault designing and manufacturing firms.
Explanation:
A socially optimal quantity of a good or service is the quantity of a good or service that is beneficial to the society ( i.e. to other industries related directly or indirectly to the good or service )
The socially optimal number of bank robberies is not equal zero because due to the presence or the possibility of robberies in Banks, some industries will be sustained and such industries are ; Security agencies and their personnel , Insurance companies, Vault designing and manufacturing firms.
Hence if the socially optimal number of bank robberies equals zero the aforementioned industries will be out of business
Of the "Five C's of Credit" which do you think is most important in determining someone's credit worthiness? Why?
Answer:
Character
Explanation: If you have borrowed money, you have most likely heard your lender discuss the Five C’s of Credit. Recently, many lenders have indicated that character of the borrower is the most important of the Five C’s, particularly in tough economic times. -https://www.farmprogress.com/most-important-c-credit
The "Five C's of Credit" that is most important in determining someone's creditworthiness is Character. This is further explained below.
What is Character?Generally, Character is simply defined as the mental and moral characteristics that distinguish a person
In conclusion, lenders of money, look to character history to determine the potency Five C's of Credit.
Read more about Character
https://brainly.com/question/3756907
#SPJ6
When coins were jfirst used, they only had an image on one side. Why did coins start to have images on two sides?
Answer:
The coins have images on both sides because the coin issuers, or seigniors, wanted to see their faces on the coins.
Coins start to have images on two sides because the coin issuers, or seigniors, wanted to see their faces on the coins.
When and why were coins used as money?People traded products and services before money was created. The Mesopotamian people did not invent the shekel, which is regarded as the first known form of money, until roughly 5,000 years ago. Printed coins were used to pay troops, it was approximately 650–600 B.C. when gold and silver coins first appeared. The first real coins were struck in the prehistoric kingdoms of Lydia and Ionia and were made of electrum, a mineral composed primarily of gold and at least 20 percent silver.
The Lydians started minting gold coins in the period between 560 and 546 BC after learning how to separate the gold from the silver in electrum. Coins are significant historical primary sources. They communicate king names together with their titles, images, locations, dates, dynasties, accomplishments, and logos.
Learn more about coins here:
https://brainly.com/question/28304
#SPJ6
When using email to request action, the subject line should be as vague as possible.
Question 7 options:
True
False
Answer:
False
Explanation:
When using an email to request an action the subject line should be brief but specific. Leaving a vague subject line can often confuse another, however, making the subject line too lengthy and specific defeats the purpose. The best subject lines are brief but give a general idea of what the email contains.
Answer:
False
Explanation:
To email someone to request action, you can't be vague or you might not get what you exactly want from that person.
The retained earnings balance was $22,900 on January 1. Net income for the year was $18,100. If retained earnings had a credit balance of $23,800 after closing entries were made for the year, and if additional stock of $5,200 was issued during the year, what was the amount of dividends declared during the year
Answer:
$17,200
Explanation:
Calculation to determine what was the amount of dividends declared during the year
Beginning retained earnings + Net income - Dividends = Ending retained earnings.
$22,900 + $18,100 - Dividends = $23,800
Dividends=$41,000-$23,800
Dividends = $17,200
Therefore the amount of dividends declared during the year is $17,200
In a closed economy, public saving is the amount of a. income that households have left after paying for taxes and consumption. b. spending that the government undertakes in excess of the taxes it collects. c. income that businesses have left after paying for the factors of production. d. tax revenue that the government has left after paying for its spending.
Answer:
In a closed economy, public saving is the amount of
d. tax revenue that the government has left after paying for its spending.
Explanation:
Public saving or budget surplus in a closed economy describes the excess of government revenue (obtained through taxation of individuals and businesses in the economy) and government expenditures on goods and services. In an open economy, transfers are deducted before arriving at the public saving. In all economies, the addition of private (individual and business) and public savings result to national investments.
Hayword, Inc. uses weighted-average costing and has two departments and has provided data related to its mixing department for the month of July. The Controller has asked you prepare a cost reconciliation report and provide the related computations. Use the information included in the Excel Simulation and the Excel functions described below to complete the task.
1 Hayword, Inc. uses weighted-average costing and has two departments - mixing and packaging 2 The following information relates to work in the mixing department for the month of July: 4 Work in process, July 1: 5 Units in process 6 Percent completed with respect to materials 7 Percent completed with respect to conversion 8 Cost in the beginning inventory: 9 Materials cost 10 Conversion cost 11 Units started into production during the period 12 Costs added to production during the period 13 Materials cost 14 Conversion cost 15 Work in process, July 31: 16 Units in process 17 Percent completed with respect to materials 18 Percent completed with respect to conversion 19 20 Use the data to answer the following 21 22 1. Compute equivalent units. 23 24 25 26 Units transferred to the next department 27 Ending work in process: 28 Materials 29 Conversion 30 Equivalent units of production 31 300 60% 40% $10,500 $6,750 6,200 $330,912 $406,408 450 40% 30% Mixing Department Equivalent Units of Production Materials Conversion
Answer:
Hayword, Inc.
Cost Reconciliation Report
Costs to be accounted for:
Cost in the beginning inventory $17,250
Units started during the period 737,320
Total cost of production $754,570
Costs accounted for:
Units transferred out $735,680
Ending inventory $18,882
Total assigned costs $$754,562
Difference due to approximations = $8
Explanation:
a) Data and Calculations:
Work in process, July 1:
Units in process = 300
Percent completed with respect to materials = 60%
Percent completed with respect to conversion = 40%
Cost in the beginning inventory:
Materials cost = $10,500
Conversion cost = $6,750
Units started during the period = 6,200
Costs added during the period:
Material costs = $330,912
Conversion costs = $406,408
Work in process, July 31 = 450 units
Percent completed with respect to materials = 40%
Percent completed with respect to conversion 30%
Units
Beginning inventory 300
Units started during the period 6,200
Total units under production 6,500
Ending inventory 450
Units transferred out 6,050
Cost of production:
Materials cost Conversion cost Total
Cost in the beginning inventory $10,500 $6,750 $17,250
Units started during the period 330,912 406,408 737,320
Total cost of production $341,412 $413,158 $754,570
Equivalent Units:
Units Materials Conversion
Units transferred out 6,050 6,050 (100%) 6,050 (100%)
Ending inventory 450 180 (40%) 135 (30%)
Total equivalent units of production 6,230 6,185
Cost per equivalent unit:
Materials Conversion
Total cost of production $341,412 $413,158
Total equivalent units 6,230 6,185
Cost per equivalent unit $54.80 $66.80
Cost assigned to:
Materials Conversion Total
Units transferred out $331,540 $404,140 $735,680
(6,050 * $54.80) (6,050 * $66.80)
Ending inventory 9,864 9,018 $18,882
(180 * $54.80) (135 * $66.80)
Total assigned costs $341,404 $413,158 $754,562
Preferred stock issued in exchange for land would be reported in the statement of cash flows in Group of answer choices the cash flows from financing activities section the cash flows from investing activities section a separate schedule the cash flows from operating activities section
Answer: a separate schedule
Explanation:
Preferred stock, are referred to as the shares of the stock of a company whereby the dividends are paid out to the preference shareholders before the common stock dividends are issued.
It should be noted that the preferred stock which is issued in exchange for the land will be reported in the statement of cash flows in a separate schedule.
_____ is the quantity of a good or service that people are willing to buy at various prices. Group of answer choices Capacity Market share Market potential Supply Demand
Answer:
Demand
Explanation:
Demand is the total quantity of a good or service that people are willing to buy at various prices
According to the law of demand, the higher the price, the lower the quantity demanded and the lower the price, the higher the quantity demanded.
So, at higher prices, demand would be lower than at lower prices
Which printing method is best for Bath Bomb Container?
Answer:
One of the most typical methods for Custom Bath Bomb Container is flexographic and offset printing. https://custompackagingpro.com/product/custom-printed-bath-bomb-packaging-boxes
g Required: 1. Compute the throughput time. (Round your answer to 1 decimal place.) 2. Compute the manufacturing cycle efficiency (MCE) for the quarter. (Round your percentage answer to nearest whole percent.) 3. What percentage of the throughput time was spent in non–value-added activities? (Round your percentage answer to nearest whole percent.) 4. Compute the delivery cycle time. (Round your intermediate calculations and final answer to 1 decimal place.) 5. If by using Lean Production all queue time during production is eliminated, what will be the new MCE? (Do not round intermediate calculations. Round your percentage answer to 1 decimal place.)
Answer:
Note The full question is attached as picture below
1. Throughput time = Process + Inspection + Move + Move time
Throughput time = 2.7 + 0.3 + 1.0 + 5.0
Throughput time = 9.0 days
2. Manufacturing cycle efficiency = Value added time / Throughput time
Manufacturing cycle efficiency = 2.7 / 9.0
Manufacturing cycle efficiency = 0.30
Manufacturing cycle efficiency = 30%
3. Non value added throughput time = 100% - 30%
Non value added throughput time = 70%
4. Delivery cycle time = Wait time + Throughput time
Delivery cycle time = 14.0 + 9.0
Delivery cycle time = 23 days
5. New Manufacturing cycle efficiency = Value added time / Throughput time
New Manufacturing cycle efficiency = 2.7 / 4
New Manufacturing cycle efficiency = 0.675
New Manufacturing cycle efficiency = 67.5%
Which of the following is NOT an accurate statement about business processes in the context of implementing supply chain management?
A. Logistics are one of front-end practices that drive entire business practices.
B. Front-end business processes refer to the practices related to customers-product development-suppliers.
C. Key aspects of strategic management include leadership and (organizational) cultures.
D. Infrastructure support includes IT, knowledge/innovation management)
E. Complex performance measures are related to customers and supply chain management
Answer:
B. Front-end business processes refer to the practices related to customers-product development-suppliers.
Explanation:
The above given statement is NOT an accurate statement about business processes in the context of implementing supply chain management.
Assume that per capita income is growing at different rates in the following countries: Nepal, 0.7 percent; Kenya, 1.3 percent; Singapore, 6.9 percent; Egypt, 3.8 percent. How long will it take for each country to double its income per person
Answer:
100 years
53.8 years
10.1 years
18.4 years
Explanation:
country to double given its growth rate
Number of year for GDP to double = 70 / growth rate of country
1. 70 / 0.7 = 100
2. 70 / 1.3 = 53.8
3. 70 / 6.9 = 10.1
4. 70 / 3.8 = 18.4
Options for attacking the high costs of items purchased from suppliers do not include Multiple Choice pressuring suppliers for more favorable prices. integrating backward into the business of high-cost suppliers and making the item in-house so as to better control the cost. switching to lower-priced substitute inputs. collaborating closely with suppliers to identify mutual cost-saving opportunities. raising prices to customers (in order to cover the high costs).
Answer:
raising prices to customers (in order to cover the high costs).
Explanation:
Supply-side economist can be defined as economists who believes that the ability and willingness of the producers of goods and services to manufacture or produce sets the pace for the economic growth of a country.
This ultimately implies that, increasing the supply of goods and services would cause an economic growth for a country.
Options for attacking or mitigating the high costs of items purchased from suppliers do not include, the seller such as a retailer raising prices to customers in a bid to cover the high costs incurred from the supply.
However, the seller could pressure his or her supplier to lower the cost, switch to a cheaper substitute products, and creating a collaborative effort with the supplier for mutual cost-saving opportunities in the market.
A newly constructed water treatment facility cost $2 million. It is estimated that the facility will need renovating every 30 years at a cost of $1 million. Annual repairs and maintenance are estimated to be $100,000 per year. At an interest rate of 6%, determine the capitalized cost of the facility
Answer:
$3,876,667
Explanation:
Capitalized cost = $2,000,000 + ($100,000 / 0.06) + [[$1,000,000*(A/F, 6%, 30)] / 0.06]
Capitalized cost = $2,000,000 + $1,666,667 + [$1,000,000*(0.0126)] / 0.06
Capitalized cost = $2,000,000 + $1,666,667 + $210,000
Capitalized cost = $3,876,667
So, the value of the capitalized cost of th e facility is $3,876,667.
