the student wishes to repeat the using different slit separations. what is the smallest slit separation, in micrometers, that produces a first-order maximum?

Answer:

x = A cos ω t          at t = zero, x displacement equals amplitude

x = .088 m cos ω t             describes the motion

We need yet to find ω in terms of P which is given

ω = √(k / m)        

P = 1 / f      and f = ω / (2 π)

Thus ω = 2 π f = 2 π / P       since 1 / f = P

This gives us

x = .088 m cos 2 π / .66 * t    

The kinetic energy is 939.87 J.

Kinetic energy is the power that an object has as a result of motion. If we want to accelerate an object, we have to exert force. Applying force requires effort on our part. The object will be moving at a new, constant speed once the work is done because energy has been transferred to it.

A particle, an object, or a collection of particles can move because of kinetic energy, which is the force that drives motion. Kinetic energy is used by objects in motion like a person walking, a baseball being thrown, food falling from a table, and charged particles in an electric field.

Kinetic energy = 1/2mv²

Kinetic energy =  1/2×0.06×177²

Kinetic energy = 939.87 J.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

Three helium-4 nuclei (alpha particles) are turned into carbon by a series of nuclear fusion processes known as the triple-alpha process.

What results from the triple-alpha procedure as the finished product?

The triple-alpha process and the alpha process are two classes of nuclear fusion reactions that stars use to change helium into heavier elements. The alpha process is also referred to as the alpha ladder. [1] Only helium is used in the triple-alpha process, which also yields carbon.

Which statement concerning alpha particles in an atom is accurate?

Two protons and two neutrons make up alpha particles, which are identical to helium nuclei and have a positive charge.

Learn more about Alpha Particle

Visit:

https://brainly.com/question/17464734

#SPJ4

The new acceleration would be 24.0 m/s/s.

Acceleration is the rate of change of velocity of an object over time. It is a vector quantity, meaning that it has both magnitude and direction. Acceleration is the result of applying a force to an object, and can be described mathematically as the change in velocity (or speed) divided by the time it takes for the acceleration to occur. Acceleration can also be caused by a change in the direction of motion and is measured in meters per second squared (m/s2). It is an important concept in physics, and is used to describe motion in objects ranging from cars to planets.

The new acceleration would be 24.0 m/s/s. This is because the acceleration of an object is directly proportional to the force applied to it, and inversely proportional to its mass. Therefore, doubling the mass of the object would halve the acceleration, since the force applied to the object remains the same.

To learn more about acceleration
https://brainly.com/question/605631
#SPJ1

Answer:

None of the choices you provided are correct. When a gas burns, it releases energy in the form of heat and light. Some of this energy is transferred to the pot of water, increasing its temperature, but some of the energy is also released as light. However, the rest of the energy is not transformed into chemical, electrical, or nuclear energy. Instead, it is lost to the environment in the form of waste heat. This is why gas stoves can become hot to the touch - they are releasing excess energy in the form of heat that is not being used to heat the pot of water.

Explanation:

The system that is more energy efficient is system A because it makes use of electricity to produce more results.

Energy efficiency is the use of less energy to perform the same task or produce the same result.

Energy-efficient homes and buildings use less energy to heat, cool, and run appliances and electronics, and energy-efficient manufacturing facilities use less energy to produce goods.

Energy efficiency has the following benefits:

According to this question, the following applies:

Based on the above explanation, it can be observed that system A is more energy efficient because it uses the same electricity to achieve more.

Learn more about energy efficiency at: https://brainly.com/question/28939461

#SPJ1

Answer:

Here is answer

Explanation:

a) The weight of the solid 'S' is a contact force because it acts on the solid 'S' through physical contact with the ground.

b) The characteristics of the weight of solid 'S' are:

It acts in the downward direction.

It is a gravitational force that is exerted by the Earth on the solid 'S'.

It is equal to the mass of the solid 'S' multiplied by the acceleration due to gravity (W = m*g).

c) The weight of solid 'S' can be represented by a vector as shown below:

[asy]

unitsize(1cm);

draw((0,0)--(0,15),Arrow(6));

label("$W$", (0,7.5), W);

[/asy]

a) The other forces acting on solid 'S' are the normal force exerted by the inclined plane on the solid 'S' and the frictional force exerted by the inclined plane on the solid 'S'. The normal force is a contact force, while the frictional force is also a contact force.

b) These forces can be represented by vectors as shown below:

[asy]

unitsize(1cm);

draw((0,0)--(0,15),Arrow(6));

label("$W$", (0,7.5), W);

draw((0,0)--(15sqrt(2)/2,15/2),Arrow(6));

label("$N$", (7.5sqrt(2),7.5), NE);

draw((0,0)--(-15sqrt(2)/2,-15/2),Arrow(6));

label("$F_f$", (-7.5sqrt(2),-7.5), SW);

[/asy]

c) The characteristics of these forces are:

The normal force acts perpendicular to the surface of the inclined plane.

The frictional force acts in the opposite direction to the direction of motion or intended motion of the solid 'S'.

The magnitude of the normal force is equal to the weight of the solid 'S', but in the opposite direction.

The magnitude of the frictional force depends on the coefficient of friction between the solid 'S' and the inclined plane, as well as the normal force.

a) The new force acting on solid 'S' is the gravitational force, which is a force acting from a distance.

b) The characteristics of the gravitational force are:

It acts in the downward direction.

It is a force that is exerted by the Earth on the solid 'S'.

Its magnitude can be represented by the vector shown below (using a scale of 1 cm to represent 1.3 N):

[asy]

unitsize(1cm);

draw((0,0)--(0,-1.3),Arrow(6));

label("$W$", (0,-0.65), S);

[/asy]

The pattern gets bigger as the light wave length gets longer. other maxima are further from the central one and are wider.

A wavelength is the distance between two identical locations (adjacent crests) in successive cycles in a waveform signals that is transmitted by a wire or in space. Typically, this length is expressed in feet (m), millimeters (cm), or millimeters (mm) in wireless systems (mm).

The distance that separates two wave crests is known as the wavelength, and it also applies to troughs. The number of vibrations that pass across a certain area in a second, or 60hz (Hz), is the unit of measurement for frequency (Hertz).

To know more about wavelengths  visit:

https://brainly.com/question/1852060

#SPJ4

The magnitude of Ernie's resultant velocity is    [tex]V=8.72m/s[/tex].

Velocity:

Velocity is the direction in which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time. In kinematics, the area of classical mechanics that deals with the motion of bodies, velocity is a fundamental idea.

Given,

Ernie's swimming rate with respect to the river   [tex]V_{ER} =6.2 m/s[/tex]

River's current rate [tex]V_{R}=10.7 m/s[/tex]

Hence,

         The magnitude of Ernie's resultant velocity

                                               [tex]V[/tex] = [tex]V_{R} -V_{ER}=10.7i - 6.2j[/tex]

                                              [tex]V=\sqrt{(10.7)^{2}-(6.2)^{2} }[/tex]

                                              [tex]V=8.72m/s[/tex]

Hence,

           The magnitude of Ernie's resultant velocity is  [tex]V=8.72m/s[/tex].

Learn more about Velocity here

https://brainly.com/question/25749514

#SPJ4

Answer:

(A)   9.2 Newtons

(B)   200.8 Newtons

Explanation:

Attached is the free body diagram I drew along with some of the work/formulas I used. Please ask me any questions you have in the comments about my diagram/work. I'd be happy to walk you through it.

In a one-dimensional string, a harmonic wave has a maximum transverse velocity and maximum transverse acceleration of 1ms-1 and 1ms-2, respectively.

We have attached a harmonic wave with a frequency of 80 Hodge to the string. Additionally, a positive extraction travels at a speed of 12 m/s with an amplitude of 0.025 m. Next, we must create a proper wave function for this wave in the first. In light of this.

we have established that the frequency F is the hurt amplitude is 0.025 m, and the speed is 12 m/s. As a result, given that we are aware of the wave function's writing, we may determine whether or not the sign K x minus omega T applies. Omega, which equals two pi into, is the angular frequency in this case. Thus, we can say that this word has been introduced. 80 is to be purchased That makes 160 by, too.

To learn more about string refer to :

https://brainly.com/question/24113108

#SPJ4

Tension of the three cables connecting the  celling, 7 kg ball, 4 kg ball,  5 kg ball respectively 156.8 N,  88.2 N and 49 N.

The force communicated through a rope, string, or wire when two opposing forces draw on it is known as tension. The tension force pulls energy equally on the bodies at the ends and is applied along the entire length of the wire.

Tension of the cable connecting the  celling and 7 kg ball:

= (7 kg + 4 kg + 5Kg) × 9.8 m/s²

= 156.8 N.

Tension of the cable connecting the  7kg ball and 4 kg ball:

= (4 kg + 5Kg) × 9.8 m/s²

= 88.2 N.

Tension of the cable connecting the  4kg ball and 5 kg ball:

= 5Kg× 9.8 m/s²

= 49 N.

Learn more about tension here:

https://brainly.com/question/29124835

#SPJ1

The velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.

To find the velocity of the water where the pipe is narrow, you can use the formula for the mass flow rate, which is given by:

Mass flow rate = Density * Flow rate

= Density * (Area * Velocity)

Where:

Density is the density of the fluid

Flow rate is the volume flow rate, or the rate at which volume flows through the pipe

Area is the cross-sectional area of the pipe

Velocity is the velocity of the fluid

The mass flow rate is constant, so you can set the mass flow rate on either side of the constriction equal to each other and solve for the velocity on the other side.

The cross-sectional area of the pipe on the narrow side is given by the formula for the area of a circle:

A = pi * r^2

Where:

A is the cross-sectional area of the pipe

r is the radius of the pipe

The radius of the pipe on the narrow side is 3 cm / 2 = 1.5 cm. Plugging this value into the formula for the cross-sectional area, you get:

A = pi * (1.5 cm)^2

= 7.07 cm^2

The cross-sectional area of the pipe on the wide side is given by the same formula, with a radius of 6 cm / 2 = 3 cm:

A = pi * (3 cm)^2

= 28.27 cm^2

Since the mass flow rate is constant, you can set the mass flow rates on either side of the constriction equal to each other and solve for the velocity on the other side:

(Density * 7.07 cm^2 * v) = (Density * 28.27 cm^2 * 8 m/s)

Solving for v, the velocity on the narrow side, you get:

v = (Density * 28.27 cm^2 * 8 m/s) / (Density * 7.07 cm^2)

= 11.6 m/s

The final value for the velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.

To learn more about mass flow rate refer :

https://brainly.com/question/13289839

#SPJ4

The heater needs to provide 540 W of power just to make up for the heat lost through this one wall.

Styrofoam is a trademarked brand of foam insulation and craft material manufactured by the Dow Chemical Company. It is made from expanded polystyrene (EPS) beads that are fused together with steam and pressure. EPS is a lightweight and rigid material that is used for insulation, packaging, and soundproofing. Its properties make it an ideal material for crafting, floristry, model building, and other art projects. Styrofoam is stable in most environments and is resistant to water, oil, and most chemicals. It can be cut, shaped, and painted easily and is an excellent thermal insulator. In addition, it is also non-toxic and non-carcinogenic, making it a safe and economical choice for many applications.

Assuming that the wall is a perfect insulator, the heater will have to provide enough power to make up for the heat lost due to conduction and convection. The rate of heat loss per unit area is given by:

Q = λ*A*(T2 - T1)/d
Where:
λ = thermal conductivity of styrofoam (see table above)
A = Area of wall (3*3) = 9 m2
T2 = Temperature inside the house (25C)
T1 = Temperature outside the house (0C)
d = thickness of styrofoam insulation (2.5 cm)

Plugging in the values we get:
Q = 0.045*9*(25-0)/0.025 = 540 W
Therefore, the heater needs to provide 540 W of power just to make up for the heat lost through this one wall.

To learn more about Styrofoam
https://brainly.com/question/29332536
#SPJ4

The final temperature of the piece of iron with the mass of 9.8 grams on the absorption of 365J of energy is 113.56°C.

The specific heat capacity of a material can be defined as the quantity of heat energy (J) which is absorbed per unit mass (kg) of the material when its temperature is increased by 1 K (or 1 °C). The SI unit of specific heat capacity is J/(kg K) or J/(kg °C).

The specific heat capacity of a material can be calculated by the formula:

Q = m × c × ΔT

where, Q = heat energy,

m = mass of the material,

c = specific heat capacity,

ΔT = change in temperature

The final temperature of the piece of iron can be calculated by the formula:

Q = m × c × ΔT

ΔT = (Final temperature - initial temperature)

365J = 9.8 × 0.46 × ΔT

365J = 4.508 × ΔT

ΔT = 80.96

ΔT = Final temperature = initial temperature

ΔT = (T - 32.6)

80.96 = (T - 32.6)

T = 80.96 + 32.6

T = 113.56°C

Therefore, the final temperature of the piece of iron is 113.56°C.

Learn more about Specific heat here:

https://brainly.com/question/11297584

#SPJ1

4.71 s long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot.

The average position of an object's weight is known as its center of gravity. Any object's travel through space may be entirely explained in terms of how its gravitational center moves from one location to another and, if it is free to spin, how it rotates around that center of gravity. Calculations combining gravitation and dynamics may be made much simpler by treating an object's mass as though it were concentrated at a single location.

T=2π√(l/g)

T=2π√(5.53/9.81)

T=4.71

T =4.71 s

To know more about center of gravity visit:

https://brainly.com/question/20662235

#SPJ4

A tension of 3.5 to 4.5 is advised when sewing tough fabric, such denim or leather. This allows you to effortlessly maintain neatness across the fabric when sewing through it. Before starting to sew any thick material, check the attachments on your sewing machine and adjust the tension.

Depending on the thickness of the denim, I use a straight-stitch length between 3.0 mm and 4.0 mm. I also increase the tension on my machine to 4.6 (up from 4.0 for lightweight woven fabrics). If my denim has spandex in it, I use a stretch stitch, such as a narrow zigzag.

Linen, cotton and denim: These fabrics hold wrinkles well, so they require the highest heat, from 150 to 200 degrees. If needed, you may also use steam or spray water from a bottle or your iron.

The longer the stitch length, the easier and faster it will be to pull the fabric along the gathering threads. However, the shorter the stitch length, the easier it will be to achieve even gathers. We find a 4.5 mm setting to be a good compromise, but it's always a good idea to test and see what you prefer.

To learn more about tension visit:

https://brainly.com/question/4358835

#SPJ4

Explanation:

If you dropped particles of different shapes from a boat into still water, they would fall straight down due to the force of gravity. The speed at which they fall would depend on their mass and the shape of the particles could affect how they move through the water, but ultimately they would all sink to the bottom of the water body. If the particles are buoyant, they may float instead of sinking.

All galaxies outside the Local Group are moving away from us, and the farther away they are, the faster they're going.

We may learn a lot about the nature of the cosmos from Hubble's rule, which states essentially that a known universe velocity (or, as it is commonly displayed, its redshift) is precisely proportionate to its distance. The relationship between distance and speed should not exist if the cosmos is constant and unchanging.

The Hubble-Lemaître law, commonly referred to as Hubble's law, is the finding in astrophysics that planets are eloping from Earth at rates proportionate to their separation. In other words, they are travelling away from Earth more quickly the more away they are.

To know more about Hubble visit:

https://brainly.com/question/29766816

#SPJ4

(a) The normal force is 267.7 N and frictional force is 980 N.

(b) The minimum coefficient of static friction is 0.27, which is needed to prevent slipping at the base.

(c) The direction of the contact force is 1016 N.

∈(t) = 0

N₂ ( L sinθ ) = 800 ( [tex]\frac{L}{3}[/tex] cosθ )

N₂ = 267.7 N

(a) Normal force F(d) = N₂ = 267.7 N

Frictional force N = 800 + 180

                         N = 980 N

(b) The minimum coefficient of static friction,

F(d) = μ N₁

μ = F / N₁

μ = 267.7 / 980

μ = 0.27

(c) The direction of the contact force,

R = [tex]\sqrt{(980)^{2} + (267.7)^{2} }[/tex]

R = 1016 N

To learn more about Coefficient of static friction, Here :

https://brainly.com/question/24173409?referrer=searchResults

#SPJ4

Answer:

D

Explanation:

distance does not factor in when you are calculating the gravitational force of an object

Answer:

Below

Explanation:

Normal force will be   mg cos 15° = 1.5*9.81 cos 15°   Newtons

Downplane force will be  mg sin 15° = 1.5 * 9.81  sin 15°    N

Acceleration

F = ma

F/m = a

1.5 ( 9.81) sin 15° / 1.5   m/s^2  = a

Mass of the fertilizer bag is 165.82 kg

According to Newton's law,

F = m*a

So, m= F/a

m= 131/0.790

m= 165.82 kg

Mass is the measure of matter of a body.

Newton has stated three laws of motion. The first law states that every object will remain at rest or in uniform motion in a straight line unless an external force compels it to change its state of action .

The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.

The third law states that every action has an equal and opposite reaction.

To know more such numericals, visit :

https://brainly.com/question/14633087

#SPJ4

According to the information available in the question, the force constant is 6.83N/m.

Using the relation;

T = 2π√m/k

T = period = 0.340 s

m = mass in kilograms = 0.0200 kg

k = spring constant = ?

Making k the subject of the formula;

k = 4π^2m/T^2

k = 4 × (3.142)^2 ×  0.0200/(0.340 )^2

k = 4 × (3.142)^2 ×  0.0200/(0.340 )^2

k = 6.83 N/m

In physics, force is that power that can change the motion of an item. It also can be described intuitively as a push or a pull. A force has both value and path, making it a vector quantity.

Force is a push or a pull and it affects our daily lives because, without force, people might not be capable of opening and near stuff or lifting up their arms or legs.

Variety of Forces :

* Frictional Forces

* Tension force.

* Spring force.

* Gravitational force.

Learn more about Force here:-brainly.com/question/12785175

#SPJ4

The required values are a) T = 2.3 seconds, b)  f = 0.434 Hz, c) ω = 2.7 rd/s.

Simple harmonic motion, a particular kind of periodic motion in which a particle repeatedly oscillates around a mean location, In U-tube oscillating liquid column motion is hence simple harmonic.

Given,

Time = 11.5 seconds to five complete vibrations.

a) Time period is time taken to complete one vibration,

So T = 11.5/5 = 2.3 seconds

b) Frequency(f) = 1/T

f = 1/2.3 = 0.434 second inverse.

c) By using formula of angular frequency ω = 2π/T

ω = 2π/2.3 = 2.7 hz

Thus, final values are a) T = 2.3 seconds, b)  f = 0.434 second inverse, c) ω = 2.7 rd/s.

To know more about simple harmonic motion visit:

brainly.com/question/28208332

#SPJ4

To keep the car from slipping, the road and tires need to have a minimum coefficient of friction of 0.188.

The things creating friction will determine the coefficient of friction. The value is often between 0 and 1, but it can also be higher. A number of 0 indicates that there is absolutely no friction between the items; superfluidity makes this feasible. Yes. Because the adhesive forces between molecules are stronger when the contact surface is substantially polished, frictional force increases. In this situation, the friction coefficient will be higher than one.

Here m= 1402 kg

r=53

v= 9.9 m/s

g=9.8

coefficient = (v^2) / rg

coefficient = (9.9^2) / (53*9.8)

coefficient = 98.01/519.4

coefficient = 0.188

Learn more about friction Visit : brainly.com/question/24338873

#SPJ4

The maximum height an object will reach if it is thrown vertically upwards at 24.0 m/s will be equal to 29.35 meters.

Kinetic energy is the term used in physics to describe the force that a moving item has.

It is described as the amount of effort necessary to accelerate anybody with a particular mass from rest to a given velocity. Except for variations in speed, the body retains the kinetic energy it gains during acceleration.

As per the given information in the question,

The formula of kinetic energy is,

K.E = 1/2 mv²   (i)

The formula of gravitational potential energy is,

u = mg     (ii)

Equate equations (i) and (ii)

1/2 mv² = mgh

h = 1/2 v²/g

h = 1/2 (24)²/9.81

= 576/19.62

h = 29.35 meters.

To know more about Kinetic energy:

https://brainly.com/question/26472013

#SPJ1

Let us find first the forces at 1, 2 & 3 points.

We know that ke= 8.99 * 109N.m2 / C2

The forces are: -

F1 = keq1q2 / r212 = {8.99 * 109N.m2 / C2} * {10 * 10-6 C} * {40 * 10-6 C} / {10 * 10-2 m}2

F1 = 359.6 N

F2 =keq1q3 / r213 = {8.99 * 109N.m2 / C2} * {10 * 10-6 C} * {30 * 10-6 C} / {30 * 10-2 m}2

F2 = 29.96 N

F3 = keq2q3 / r213 = {8.99 * 109N.m2 / C2} * {40 * 10-6 C} * {30 * 10-6 C} / {20 * 10-2 m}2

F3 = 269.7 N

Now,

The net force on q1 is F1 – F2,

i.e. F1 + F2 = 359.6 + 29.96

F(q1) = 389.56 N to the left

To learn more about Coulomb’s Law:

https://brainly.com/question/66110

#SPJ1

The solid object that created the comet's nebulous tail is likely the nucleus of the comet, which is typically made of ice, dust, and rocky material.

Comet is a web application development technique that enables web applications to send and receive data from a server asynchronously without the need for a browser page refresh. It creates an interactive user experience by enabling a continuous connection between the client and server so that data can be exchanged in both directions. This type of communication is also known as a bi-directional, full-duplex connection. Comet is an umbrella term for several techniques for achieving this kind of communication.

The nucleus of a comet can range in size from a few hundred meters to tens of kilometers, though their average size is typically around 5 kilometers. As the comet approaches the Sun, its frozen material turns to gas, which is pushed away from the Sun by the solar wind and forms the nebulous tail that stretches millions of kilometers across the sky.

To learn more about comet

https://brainly.com/question/29848984
#SPJ4

The velocity of both objetcs after the collision is 3.07m/sec if both object masses are 6.2 kg and 8.0kg respectively.

To find the velocity of both objects we need to conserve the momentum. We need to follow the law of conservation of momentum which states that initial momentum is equal to final momentum.

Now, we know that momentum =mass × velocity

So, initial momentum of first object=6.2×3=18.6Kg-m/sec

Similarly, initial momentum of second object=8×3.5=28.0kg-m/sec

Now, it is given that both object stick together, so total mass of both objects are=(6.2+8)=14.2kg

Now, both objects are moving with common velocity, so assume both have velocity v

=>So, final momentum of both objects is =14.2×v

according to law of conservation of momentum

=>18.6+25=14.2v

=>43.6=14.2v

=>v=43.6/14.2

=>v=3.07m/sec

Hence, final velocity of objects are 3.07m/sec.

To know more about velocity, visit here:

https://brainly.com/question/18084516

#SPJ4