Answer:
Explanation:
I’ll help
the product 17.10 ✕
Explanation:
pls write the full question
4. Which of the following statements best describes the relationship
between mechanical, kinetic and potential energies of an object of mass
m kg that is thrown vertically upwards with in initial velocity of v. m/s.
A. Kinetic energy increases while potential energy decrease and mechanical
energy remains constant.
B. Kinetic energy decreases, while potential energy increases and mechanical
energy remains constant.
C. Both kinetic and potential energies decrease while mechanical energy
increases.
D. Both kinetic and potential energies increase while mechanical energy
remains constant.
(1)
21
Answer:
D
Explanation:
increase while mechanical energy remains constant
A blow-dryer and a vacuum cleaner each operate with a voltage of 120 V. The current rating of the blow-dryer is 13 A, while that of the vacuum cleaner is 4.8 A. Determine the power consumed by (a) the blow-dryer and (b) the vacuum cleaner. (c) Determine the ratio of the energy used by the blow-dryer in 15 minutes to the energy used by the vacuum cleaner in 40 minutes.
Answer:
(a) 1560 W
(b) 576 W
(c) 1.01
Explanation:
Voltage, V = 120 V
Current in dryer, I = 13 A
current in vacuum cleaner, i' = 4.8 A
(a) Power consumed by dryer,
P = V I = 120 x 13 = 1560 W
(b) Power consumed by vacuum cleaner
P' = V I' = 120 x 4.8 = 576 W
(c) Energy consumed by dryer
E = P x t = 1560 x 15 x 60 = 1404000 J
Energy consumed by the vacuum cleaner
E' = P' x t' = 576 x 40 x 60 = 1382400 J
the ratio of energies is
E : E' = 1404000 : 1382400 = 1.01
At a distance of 14,000 km from the center of Planet Z-99, the acceleration due to gravity is 32 m/s2. What is the acceleration due to gravity at a point 28,000 km from the center of this planet
A body of mass m feels a gravitational force due to the planet of
F = GmM/R ² = ma
where
• G = 6.67 × 10⁻¹¹ N•m²/kg² is the universal gravitational constant
• M is the mass of the planet
• R is the distance between the body and the planet's center
• a is the acceleration due to gravity
Solving for a gives
a = GM/R ²
Notice that 28,000 km is twice 14,000 km. The equation says that the acceleration varies inversely with the square of the distance. So if R is changed to 2R, we have a new acceleration of
GM/(2R)² = 1/4 × GM/R ² = a/4
so the acceleration of the body at 28,000 km from the planet's center would be (32 m/s²)/4 = 8 m/s².
Suppose 2.10 C of positive charge is distributed evenly throughout a sphere of 1.30-cm radius. 1) What is the charge per unit volume for this situation
Answer:
[tex]\rho=2.28\times 10^5\ C/m^3[/tex]
Explanation:
Given that,
Charge, Q = 2.1 C
The radius of sphere, r = 1.3 cm = 0.013 m
We need to find the charge per unit volume for this situation. It can be calculated a follows:
[tex]\rho=\dfrac{Q}{\dfrac{4}{3}\pi r^3}\\\\\rho=\dfrac{2.1}{\dfrac{4}{3}\pi \times (0.013)^3}\\\\\rho=2.28\times 10^5\ C/m^3[/tex]
So, the charge per unit volume is [tex]2.28\times 10^5\ C/m^3[/tex].
A negative slope on the velocity vs. time graph indicates a negative
acceleration.
A True
B. False
A. true
means decelerating
found in brainly itself
shirleywashington
Ambitious
2.3K answers
14M people helped
Explanation :
We know that the slope of velocity -time graph gives the acceleration. Acceleration of an object is defined as the rate of change of velocity i.e.

Suppose a driver suddenly applies brakes. In this case the initial velocity of his or her vehicle is more and the final velocity is less.
So, the acceleration is negative in this case i.e. the object is decelerating.
A negative slope on the velocity versus time graph indicates that an object is not accelerating. This statement is false as the object is decelerating.
dujevduxjehhsusheheh
m=100g
F-?
Answer:
Force = mass × acceleration
[tex]F =(100 \times 1000) \times 10 \\ = 1 \times {10}^{6} \: newtons[/tex]
if a voltage v(t) = 150sinwt in volts at an operating frequency of 100hz. determine the I. dc value ii.rms value iii.period of the voltage signal
Answer:
(a) The dc value is 95.5 volts
(b) The rms value is 106.1 volts
(c) The period is 0.01s
Explanation:
Given
[tex]V(t) = 150\sin(wt)[/tex]
[tex]f = 100Hz[/tex]
Solving (a): The dc value
[tex]V(t) = 150\sin(wt)[/tex] implies that
[tex]V_{max} = 150[/tex]
So, the dc value is:
[tex]V = \frac{2}{\pi} * V_{max}[/tex]
[tex]V = \frac{2}{\pi} * 150[/tex]
[tex]V = \frac{300}{\pi}[/tex]
[tex]V = 95.5V[/tex]
Solving (b): The RMS value
This is calculated as:
[tex]V_{rms} = \frac{1}{\sqrt 2} * V_{max}[/tex]
So, we have:
[tex]V_{rms} = \frac{1}{\sqrt 2} * 150[/tex]
[tex]V_{rms} = \frac{150}{\sqrt 2}[/tex]
[tex]V_{rms} = 106.1V\\[/tex]
Solving (c): The period
This is calculated as:
[tex]T = \frac{1}{f}[/tex]
So, we have:
[tex]T = \frac{1}{100Hz}[/tex]
[tex]T = 0.01s[/tex]
The acceleration vector of a particle in uniform circular motion:___________
a) points outward from the center of the circle.
b) points toward the center of the circle.
c) is zero.
d) points along the circular path of the particle and opposite the direction of motion.
e) points along the circular path of the particle and in the direction of motion.
(B)
Explanation:
Centripetal means "towards the center" so the acceleration vector of an object undergoing UCM is always pointed towards the center.
The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).
Centripetal force is the force acting on an object in curvilinear motion directed towards the axis of rotation or center of curvature. The unit of centripetal force is Newton.
Centripetal means "towards the center" so the acceleration vector of an object undergoing circular motion is always pointed towards the center.
Therefore, The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).
To know more about the Centripetal force:
https://brainly.com/question/31417673
#SPJ6
Select the only true statement:
A beam in bending experiences tensile stresses on one side and compressive stresses on the other side.
A beam in bending experiences tensile stresses along the beam center and compressive stresses along the beam’s edges.
A beam in bending experiences only compressive stresses.
A beam in bending experiences only tensile stresses.
Answer:
A beam in bending experiences tensile stresses on one side and compressive stresses on the other side.
Explanation:
A beam of light bending experiences bending stress. There exists tension inside and outside the curve. The transverse plains in the materials remains parallel to the radius during bending.What are the major sources of energy utilized during a 100 meter race, a 1000 meter race, and a marathon
Answer:
The energy from food and then from plants and then from sun.
As sun is the ultimate source of energy.
Explanation:
Distance = 100 m, 1000m, marathon
As the distance is covered by the person, so the muscular energy is used and thus the energy comes form out food.
As we know that the energy can neither be created nor be destroyed it can transform from one form to another.
So, the energy form the food which we consume is converted into the kinetic energy as we run.
A penny of mass 3.10 g rests on a small 20.0 g block supported by a spinning disk with radius of 12.0 cm. The coefficients of friction between block and disk are 0.850 (static) and 0.575 (kinetic) while those for the penny and block are 0.395 (kinetic) and 0.495 (static). What is the maximum rate of rotation in revolutions per minute that the disk can have, without the block or penny sliding on the disk
Answer:
do this Q yourself because i havent read the chapter
The maximum rate of rotation in revolutions per minute that the disk can have, without the block or penny sliding on the disk is 63 rpm.
How to solveThis is calculated using the coefficient of static friction between the penny and block, which is 0.495.
The maximum angular velocity of the disk is when the force of static friction is just sufficient to prevent the penny from sliding.
This force is equal to the mass of the penny multiplied by the acceleration due to gravity, multiplied by the coefficient of static friction.
The angular velocity of the disk is then calculated from this force and the radius of the disk.
Read more about angular velocity here:
https://brainly.com/question/6860269
#SPJ6
A dog statue is standing in the bed of a pickup truck. The bed is coated with ice, causing the force of friction between the statue and the truck to be zero. The truck is initially at rest, and then accelerates to the right, moving along a flat road. As seen from a stationary observer (watching the truck move to the right), the dog statue Group of answer choices moves to the right, but not as quickly as the truck is moving to the right, causing it to slide towards the back of the truck. does not move left or right, but the back of the truck moves towards the statue. moves to the left, as the truck moves to the right, causing the statue to slide towards the back of the truck. moves to the right at the same rate as the truck, so it doesn't slide.
Answer:
Moves towards left
Explanation:
When the truck is moving towards right then there is pseudo force acting on the fog statue which is acting left wards.
A seen from the stationary observer, the dog statue moves towards left.
22) A driver traveling at 80 km/h brakes her 2000 kg truck to stop for a red light. How much internal energy is produced
Answer:
[tex]E=4.9\times 10^5\ J[/tex]
Explanation:
Given that,
The speed of a driver, v = 80 km/h = 22.22 m/s
The mass of the truck, m = 2000 kg
We need to find how much internal energy is produced. The internal energy produced by a truck is its kinetic energy and it is given by :
[tex]E=\dfrac{1}{2}mv^2\\\\E=\dfrac{1}{2}\cdot22.22^{2}\cdot2000\\\\E=493728.4\ J[/tex]
or
[tex]E=4.9\times 10^5\ J[/tex]
So, [tex]4.9\times 10^5\ J[/tex] of internal energy is produced.
A wire carrying a 30.0-A current passes between the poles of a strong magnet that is perpendicular to its field and experiences a 2.15-N force on the 4.00 cm of wire in the field. What is the average field strenth?
Answer:
1.79 T
Explanation:
Applying,
F = BILsin∅................ Equation 1
Where F = Force, B = magnetic field, I = current flowing through the wire, L = length of the wire, ∅ = angle between the magntic field and the force
make B the subject of the equation
B = F/ILsin∅............. Equation 2
From the question,
Given: F = 2.15 N, I = 30 A, L = 4.00 cm = 0.04 m, ∅ = 90° (perpendicular to the field)
Substitute these values into equation 2
B = 2.15/(30×0.04×sin90°)
B = 2.15/1.2
B = 1.79 T
Hence the average field strength is 1.79 T
fraternity hazing is acceptable because it is an initational rite to the brotherhood
Answer:
that is the right answer
Explanation:
A spherical conductor of radius = 1.5 cm with a charge of 3.9 pC is within a concentric hollow spherical conductor of inner radius = 3 cm, and outer radius = 4 cm, which has a total charge of 0 pC. What is the magnitude of the electric field 2.3 cm from the center of these conductors?
Answer:
The answer is "66.351 N/C"
Explanation:
Given:
[tex]a=1.5\ cm= 1.5 \times 10^{-2}\ m\\\\q_1=3.9\ pc\\\\b=3\ cm\\\\c= 4\ cm\\\\q_2=0 \ pc\\\\[/tex]
Using Gauss Law:
[tex]\oint \vec{E} \cdot \vex{dA}= \frac{Q_{enc}}{\varepsilon_0 }[/tex]
[tex]E \times 4 \pi\ r^2=\frac{Q_{enc}}{\varepsilon_0}\\\\E= \frac{Q_{enc}}{4 \pi\ r^2 \varepsilon_0}= \frac{1}{4 \pi \varepsilon_0} \frac{Q_{enc}}{r^2}= \frac{k_e\ Q_{enc}}{r^2}\\\\[/tex]
[tex]=\frac{9\times 10^{9} \times 3.9 \times 10^{-12}}{(2.3\times 10^{-2})^2}\\\\=\frac{35.1\times 10^{-3}\ }{(2.3\times 10^{-2})^2}\\\\=\frac{35.1\times 10^{-3}\ }{5.29 \times 10^{-4}}\\\\=\frac{35.1\times 10 }{5.29 }\\\\=\frac{351}{5.29 }\\\\=66.351\ \frac{N}{C}[/tex]
The patellar tendon attaches to the tibia at a 20 deg angle 3 cm from the axis of rotation at the knee. If the force generated in the patellar tendon is 400 N, what is the resulting angular acceleration, in rad/s2), if the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm
Answer:
the resulting angular acceleration is 15.65 rad/s²
Explanation:
Given the data in the question;
force generated in the patellar tendon F = 400 N
patellar tendon attaches to the tibia at a 20° angle 3 cm( 0.03 m ) from the axis of rotation at the knee.
so Torque produced by the knee will be;
T = F × d⊥
T = 400 N × 0.03 m × sin( 20° )
T = 400 N × 0.03 m × 0.342
T = 4.104 N.m
Now, we determine the moment of inertia of the knee
I = mk²
given that; the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm ( 0.25 m )
we substitute
I = 4.2 kg × ( 0.25 m )²
I = 4.2 kg × 0.0626 m²
I = 0.2625 kg.m²
So from the relation of Moment of inertia, Torque and angular acceleration;
T = I∝
we make angular acceleration ∝, subject of the formula
∝ = T / I
we substitute
∝ = 4.104 / 0.2625
∝ = 15.65 rad/s²
Therefore, the resulting angular acceleration is 15.65 rad/s²
Consider a wave along the length of a stretched slinky toy, where the distance between coils increases and decreases. What type of wave is this
"Longitudinal wave" is the wave where the difference between the coils increases as well as decreases.
Generating waves whenever the form of communication being displaced in a similar direction as well as in the reverse way of the wave's designated points, could be determined as Longitudinal waves.A wave running the length of something like a Slinky stuffed animal, which expands as well as reduces the spacing across spindles, produces a fine image or graphic.
Thus the above answer is correct.
Learn more about waves here:
https://brainly.com/question/17700099
A bicycle wheel has a diameter of 63.4 cm and a mass of 1.86 kg. Assume that the wheel is a hoop with all of the mass concentrated on the outside radius. The bicycle is placed on a stationary stand and a resistive force of 123 N is applied tangent to the rim of the tire. What force is required if you shift to a 5.60-cm-diameter sprocket?
Answer:
Njfjrhrjrkrirkehrbrhrrhrhehrhrhejejebrbrhrbrbbbrhje
A negative point charge q1 = 25 nC is located on the y axis at y = 0 and a positive point charge q2 = 10 nC is located at y =14 cm. Find the y coordinate of the points where the net electric potential due to these two charges is zero.
Answer:
y = 0.1 m
Explanation:
The electrical power for point loads is
V = [tex]k \sum \frac{q_i}{r_i}[/tex]k Sum qi / ri
in this case
V = k ([tex]- \frac{q_1}{r_1 } + \frac{q_2}{r_2}[/tex])
indicate that V = 0
[tex]\frac{q_1}{r_1} = \frac{q_2}{r_2}[/tex]
r₂ = [tex]\frac{q_2}{q_1} r_1[/tex]
the distance r1 is
r₁ = y -0
the distance r2
r₂ = 0.14 -y
we substitute
0.14 - y = [tex]\frac{10}{25}[/tex] y
y ( [tex]\frac{10}{25} + 1[/tex]) = 0.14
y 1.4 = 0.14
y = 0.14 / 1.4
y = 0.1 m
The elastic extensibility of a piece of string is .08. If the string is 100 cm long, how long will the string be when it is stretched to the point where it becomes plastic?
Answer:
The elastic extensibility of a piece of string is .08. If the string is 100 cm long, how long will the string be when it is stretched to the point where it becomes plastic? is your ansewer dont take tension
The string will be 108 cm long when it is stretched to the point where it becomes plastic.
What is elasticity?Elasticity in physics and materials science refers to a body's capacity to withstand a force that causes distortion and to recover its original dimensions once the force has been withdrawn.
When sufficient loads are applied, solid objects will deform; if the material is elastic, the object will return to its original size and shape after the weights have been removed. Unlike plasticity, which prevents this from happening and causes the item to stay deformed,
Given parameters:
The elastic extensibility of a piece of string is 0.08.
The string is 100 cm long.
Hence, it becomes plastic, after it is stretched up to = 100 × 0.08 cm = 8 cm. The string will be 108 cm long.
Learn more about elasticity here:
https://brainly.com/question/28790459
#SPJ5
The electric power delivered to your home has 110 Volts.
All outlets in your kitchen are connected in parallel.
You always have the lights on for 660 Watts, the toaster has a resistance of 440 Ohms, the stove uses power at the rate of 2200 Watts, and the Blender has a resistance of 220 Ohms.
If all these appliances are running at he same time how much total current are you using?
Answer:
I = 26.80 A
Explanation:
From Ohm's law,
V = IR ............ 1
P = IV ............ 2
where V is the value of the voltage, I is the current, R is the resistance and P is the power.
i. The power of light switched on = 660 Watts.
ii. The power of the toaster = [tex]\frac{V^{2} }{R}[/tex]
= [tex]\frac{(110)^{2} }{440}[/tex]
= 27.5 Watts
iii. The power of the stove = 2200 Watts.
iv. The power of the blender = [tex]\frac{V^{2} }{R}[/tex]
= [tex]\frac{(110)^{2} }{220}[/tex]
= 55 Watts
Total power of the appliances = 660 + 27.5 + 2200 + 55
= 2942.5 Watts
So that,
P = IV
I = [tex]\frac{P}{V}[/tex]
= [tex]\frac{2942.5}{110}[/tex]
= 26.75
I = 26.75 A
The total current being used when all the appliances are running at the same time is 26.80 A.
(b) If the object is at 330 feet and its instantaneous velocity is 3 feet per minute at 30 minutes, what is the approximate position of the object at 32 minutes
Answer:
The final position is 36 feet.
Explanation:
initial position, d = 330 feet
speed, v = 3 feet per minute
time, t = 30 minute
now the time is 32 minute
time interval = 2 minute
So, the distance in 2 minutes is
d' = 2 x 3 = 6 feet
So, the final position is
D = 30 + 6 = 36 feet
Consider a neutron star with a mass equal to the sun, a radius of 19 km, and a rotation period of 1.0 s. What is the speed of a point on the equator of the star
Answer:
120 km/s
Explanation:
Given data :
Radius of the star is r = 19 km
Rotational time period of the star is T = 1 s
Therefore, we know that the velocity of the star is given by :
[tex]$V=\frac{2\pi r}{T}$[/tex]
[tex]$V=\frac{2 \times 3.14 \times 19\times 10^3}{1}$[/tex]
V = 119380.52 m/s
Therefore, the velocity of the point on the equator of the star is = 120 km/s
A positive statement is:________. a. reflects oneâs opinions. b. can be shown to be correct or incorrect. c. a value judgment. d. based upon an optimistic judgment.
Answer:
b
Explanation:
Determinar el flujo de calor a través del piso de losa cuyas medidas 3 X 5 cm y temperaturas superficiales son -20 ºC y 40 ºC, la conductividad térmica del material es de 1,6 X 10 -3 cal/cm s ºC y su espesor es de 10 cm durante 1 hora.
Una aluminio de 12 cm de grosor, pero están perfectamente aislados en las demás paredes. Cada cuarto es un cubo de 4,0 m de arista. Si el aire de uno de los cuartos está a 10 ºC y el otro a 30 ºC. ¿Cuántos calor se conduce durante dos minutos? 1,7X 10 -4 cal/ cm s ºC
Una pared de asbesto de 0,15 cm de espesor 1400°C y 1150 ºC en las superficies interna y externa, respectivamente. ¿Cuál es la perdida de calor a través de una pared que tiene 0,5 m por 3 m de lado, en un tiempo de minuto y medio?
!!!!!!NESECITO AYUDA¡¡¡¡¡
Answer:
0,0560 cal / gºC.
A spaceship travels 360km in one hour. Express its speed in m/s
Answer:
Spaceship speed is 36000 km/h
So, in 1 hour spaceship travel 36000 km
Or we can say that in 60×60 second spaceship travel 36000 km
Therefore in 1 sec spaceship travel
=
= 10 km/s
Answer:
Explanation:
360 km/hr(1000 m/km) / 3600 s/hr) = 100 m/s
What is the result of (305.120 + 267.443) x 0.50? How many answers can be written based on the principle of significant digits?
Answer:
The answer is 286.2815.
Do all substances conduct heat ?Why/ Why not ?
Answer:
no, all substances doesnot conduct heat
Answer:
No, all substances do not conduct heat easily because it depends on the nature of the substance. Some are good conductors of heat and some are bad. Therefore, it depends on their characteristics and their ability to conduct heat.
The bad conductors of heat are water, air, plastic, wood, etc.
Gold, Silver, Copper, Aluminium, Iron, etc. are good heat conductors as well as electrical conductors.
