Answer:
B. the recognition lag.
Explanation:
Recognition lag means the delay that lies between the economic shock arise and when it should be seen by the economist, government etc. Here the delays could be arise as the data that documented the economy state should not be available on the instant basis and after this it takes the time to analyze it correctly
Therefore as per the given situation, the option b is correct
Service levels are reported accurately is an example of which control
Answer:
Service level measures the performance of a system. Certain goals are defined and the service level gives the percentage to which those goals should be achieved. Fill rate is different from service level.
Examples of service level:
Percentage of calls answered in a call center.
Percentage of customers waiting less than a given fixed time.
Percentage of customers that do not experience a stockout.
Percentage of all parts of an order being fulfilled completely
(Explanation) if one component part of an order is not filled the Service Level for that order is Zero, If all the component parts of an order are delivered except one is filled at 51%, the service level for that order is 51% (This system is often used in supply chain delivery to manufacturing), This is a very different from a simple order fill measurement which does not consider line items on the order.
Explanation:
thank me later
For each situation below, show quantitatively and explain what is happening in the capital (financial) market.
S I X G T
a 200 300 -200 400 300
b 700 600 100 400 400
c -300 300 -400 100 300
d 100 300 -400 500 300
e 500 300 100 400 300
Answer:
Capital market is at equilibrium and no change in interest rate
Explanation:
In the capital market
National savings = " S + T - G "
At equilibrium position ; National savings = " I + X "
When National savings > "1 + X " Interest rate decrease because there is an excess of supply while
When National savings > "1 + X" interest rate will increase to balance out the capital market because there is excess of demand.
From the attached table of solution below all values of the National savings = "I + X" this shows that the capital ( financial ) market is at equilibrium position
Answer:
The financial market is going down
Explanation:
The numbers are moving around which means 360 degrees which you add to all of the numbers on the chart cousin a new pattern to develop developmentally
The balance in the Prepaid Insurance account after the adjusting entries have been recorded represents the: A. cost of the insurance expired during the period B. value of the insurance prepayment that remains to benefit future periods C. cash paid for insurance of current and future periods D. amount owed for insurance at the end of the accounting period
Answer:
B.value of insurance prepayed
Zhang Industries sells a product for $700 per unit. Unit sales for May were 400, and each month's unit sales are expected to grow by 3%. Zhang pays a sales manager a monthly salary of $3,000 and a commission of 2% of sales. Compute the budgeted selling expense for the manager for the month ended June 30.
Answer:
Zhang Industries
The Budgeted selling expense for the manger for the month ended June 30 is:
= $8,768.
Explanation:
a) Data and Calculations:
Selling price per unit = $700
Unit sales for May = 400
Expected growth of unit sales each month = 3%
Unit sales for June = 412 (400 * 1.03)
Sales revenue for June = $288,400 ($700 * 412)
Monthly sales salary to the sales manager = $3,000
Monthly sales commission = 2% of sales
Budgeted selling expense for the manger for the month ended June 30:
Monthly sales salary to the sales manager = $3,000
Monthly sales commission = 2% of sales 5,768 ($288,400 * 2%)
Total selling expense for the month = $8,768
Suppose the annual inflation rate in the US is expected to be 2.5 %, while it is expected to be 18.00 % in Mexico. The current spot rate (on 1/1/X0) for the Mexican Peso (MXN) is $0.1000. If the spot rate of MXN turns out to be $0.085 on 1/1/X1, the net cash flow of a US importer from Mexico will: Group of answer choices Increase Decrease
Answer:
Increase
Explanation:
In putting the question into a better perspective let us assume that the US importer buys goods from Mexico every year to the Tune of 1,000,000 Mexican Pesos.
The expected exchange rate on 1/1/X1=$0.1000*(1+2.5%)/(1+18%)
The expected exchange rate on 1/1/X1=$0.086864407
Amount paid based on expected exchange rate=1,000,000*$0.086864407
Amount paid based on expected exchange rate=$86,864.41
Amount paid based on actual exchange=1,000,000*$0.085
Amount paid based on actual exchange=$85,000
The above means that the US importer paid a lesser amount($85000) than it should have paid, hence, its net cash flow would increase due to a reduction in payment
Assume the following data for Cable Corporation and Multi-Media Inc.
Cable Corporation Multi-Media Inc.
Net income $31,200 $140,000
Sales 317,000 2,700,000
Total assets 402,000 965,000
Total debt 163,000 542,000
Stockholders'
equity 239,000 423,000
a1. Compute return on stockholders’ equity for both firms.
a-2. Which firm has the higher return?
A. Multi-Media Inc.
B. Cable Corporation
b. Compute the following additional ratios for both firms.
Answer:
a-1 Cable Corporation 13.05
Multi-media Inc. 33.1%
a-2 Multi-Media Inc.
2. Cable Corporation Multi-Media Inc.
Net income/Sales 9.84% 5.19%
Net income/Total assets 7.76% 14.51%
Sales/Total assets .79 times 2.80 times
Debt/Total assets 40.55% 56.17%
Explanation:
a-1. Computation to determine the return on stockholders’ equity for both firms.
CABLE CORPORATION
Using this formula
Return on Stockholders’ Equity= Net Income / Stockholder’s equity
Let plug in the formula
Return on Stockholders’ Equity=$31,200 / 239,000
Return on Stockholders’ Equity= 0.1305*100
Return on Stockholders’ Equity=13.05%
MULTI-MEDIA INC.
Return on Stockholders’ Equity=$140,000 / 423,000
Return on Stockholders’ Equity= 33.1%
a-2. Based on the above calculation the firm that has the higher return is MULTI-MEDIA INC.
b. Computation for the following additional ratios for both firms.
Cable Corporation Multi-Media Inc.
Net income/Sales 9.84% 5.19%
($31,200/317,000=9.84%)
($140,000/2,700,000=5.19%)
Net income/Total assets 7.76% 14.51%
($31,200/402,000=7.76%)
($140,000/965,000=14.51%)
Sales/Total assets .79 times 2.80 times
(317,000/402,000=.79 times
(2,700,000/965,000=2.80 times)
Debt/Total assets 40.55% 56.17%
(163,000/402,000=40.55%)
( 542,000/965,000=56.17%)
Given below are several ratios. Select the accounts or amounts that would be used in order to calculate the ratio. You will have more than one response to each ratio. Some accounts or amounts may not be used at all. (Select all that apply.) Debt-to-equity ratio a.Cash paid for acquisitions b.Interest expense c.Total dividends paid d.Cash flow from operations before interest and tax payments e.Total stockholders' equity f.Net income g.Total liabilities h.Cash flow from operations
Answer:
Total stockholders' equity.Total liabilities.Explanation:
The Debt to equity ratio shows the proportions of the financing options used to finance the operations of the company namely debt and equity.
It is calculated by the formula:
= Total liabilities / Total stockholders' equity * 100%
As shown by the formula , the relevant accounts are:
Total stockholders' equity.Total liabilities.The following information pertains to Cullumber Company. 1. Cash balance per bank, July 31, $11,310. 2. July bank service charge not recorded by the depositor $65. 3. Cash balance per books, July 31, $11,440. 4. Deposits in transit, July 31, $4,615. 5. $2,600 collected for Cullumber Company in July by the bank through electronic funds transfer. The accounts receivable collection has not been recorded by Cullumber Company. 6. Outstanding checks, July 31, $1,950. (a) Prepare a bank reconciliation at July 31, 2022.
Answer:
See below
Explanation:
Cullumber Company
Bank Reconciliation
July 31, 2022
Cash balance as per bank
$11,310
Add:
Deposits in transit
$4,615
Less:
Outstanding checks
($1,950)
Adjusted bank balance
$13,975
Cash balance per books
$11,440
Add:
Electronic fund transfer received
$2,600
Less:
Bank service charges
($65)
Adjusted cash balance
$13,975
a. If a wage of $10.25 were to be imposed on this market, such that the market was not longer strictly competitive, what would be the value for labor supply?
b. At the imposed wage of $10.25 what would be the value for labor demand?
c. Provide a properly labeled and appropriately articulated Labor Market Model given the labor supply and demand equations provided and the imposed wage of $10.25.
d. Based on the labor market model you’ve now illustrated, how would you describe the current condition of this market given the imposed wage?
Solution :
Given the wage = $ 10.25 that is to be imposed to the market.
Given equation :
[tex]L_D[/tex] = 500 – 45W and [tex]L_S[/tex] = -200 + 25W
If the wage of $10.25 is to be imposed to the market, the value of the labor supply can be found by putting the value of the wage in the labor supply equation.
At W = 10.25
Putting this value in the above equation, the labor supply would be
[tex]L_S[/tex] = -200 + 25W
[tex]L_S[/tex] = -200 + 25(10.25)
= 56.25
When W = 10.25, the value for the labor demand can be found by :
[tex]L_D[/tex] = 500 – 45W
[tex]L_D[/tex] = 500 – 45(10.25)
[tex]L_D[/tex] = 500 – 461.25
[tex]L_D[/tex] = 38.75
Therefore, the labor demand and the labor supply model is
[tex]L_D[/tex] = 400 - 45 x 10.25
[tex]L_S[/tex] = -200 + 25 x 10.25
What is the Production Possibilities Frontier's purpose?
:a. Showing businesses that in order to produce more, they need to hire more output
b. Show businesses that businesses should not produce at their maximum capacity because they could exhaust their workers and capital goods
c. Show businesses that they need to produce at their maximum capacity to be efficient
d. Showing businesses that a worker's high morale is necessary to make them efficient
Answer:
Uhh b
Explanation:
how did you find the fv factor values
Answer:
v5th factor in solve......
The following discussion focuses on the change in production and selling strategies of Timken Co., the Canton, Ohio, firm that is a major producer of bearings:
To counter the low prices of imports, Timken Co. in 2003 began bundling its bearings with other parts to provide industrial business customers with products specifically designed for their needs. Timken had begun bundling prelubricated, preassembled bearing packages for automobile manufacturers in the early 1990s. Evidence indicated that companies that sold integrated systems rather than discrete parts to the automobile manufacturers increased their sales. Other industrial customers put the same pressure on Timken in the late 1990s to lower prices, customize, or lose their business to lower-priced foreign suppliers. Manufacturers are increasingly combining a standard part with casings, pins, lubrication, and electronic sensors. Installation, maintenance, and engineering services may also be included. Suppliers, such as Timken, saw this as a means of increasing profits and making themselves more indispensable to the manufacturers. The strategy also required suppliers to remain in proximity with their customers, another advantage over foreign imports. This type of bundling does require significant research and development and flexible factories to devise new methods of transforming core parts into smart assemblies. The repackaging is more difficult for industrial than automobile customers because the volumes of production are smaller for the former. Timken also had to educate its customers on the variety of new products available.
Timken has an 11 percent share of the world market for bearings. However, imports into the United States doubled to $1.4 billion in 2002 compared with $660 million in 1997. Timken believes that the uniqueness of its product helps protect it from foreign competition. However, the company still lobbied the Bush administration to stop what it calls the dumping of bearings at low prices by foreign producers in Japan, Romania, and Hungary.
Required:
a. What factors in the economic environment, in addition to foreign imports, contributed to Timken’s new strategy in 2002 and 2003?
b. How does this strategy relate to the discussion of bundling presented in the chapter? What additional factors are presented in this case?
Answer:
Timken Co.
a. Factors in the Economic Environment that contributed to Timken;s new strategy in 2002 and 2003 in addition to foreign imports at cheaper prices:
1. The needs of industrial business customers for integrated systems
2. Lowering of prices resulting from bundling
3. Addition of installation, maintenance, and engineering services, leading to increasing profits
b. The relationship of this strategy to bundling
1. Remaining in proximity with customers
2. Significant research and development
3. Flexible factories
4. Education of customers on product variety
c. Additional factors presented in this case are:
1. Customization
2. Means of making entity more indispensable to manufacturers
3. Uniqueness of products
4. Lobbying to stop dumping
Explanation:
a) Data and Calculations:
Share of the world market for bearings = 11%
Value of bearing imports in 2002 = $1.4 billion
Value of bearing imports in 1997 = $660 million
b) Companies engage in bundling by offering their main products together with several others together with services as a single combined unit. This strategy always lowers the bundled price when compared with the prices of the separate products and services. Thus, companies that sell bundled products and services often achieve more sales at the expense of profits.
How are laws of supply and demand similar
Which of the following is considered the process in the systems thinking example of a decision support system?
a. transaction
b. processing system.
c. optimization
d. forecasts
Answer: C. Optimization
Explanation:
In the decision making system, TPS is considered to be the input in the systems thinking example.
In the decision making system, optimization is considered to be the process in the systems thinking example.
In the decision making system, TPS is considered to be the input in the systems thinking example.
In the decision making system, a forecast is considered to be the output in the systems thinking example.
Pistol Corporation purchased 100 percent ownership of Scope Products on January 1, 20X6, for $56,000, at which time Scope Products reported retained earnings of $10,000 and capital stock outstanding of $30,000. The differential was attributable to patents with a life of eight years. Income and dividends of Scope Products were
Answer:
1.20X6
1a. Dr Investment in Scope Products $56,000
Cr Cash $56,000
1b. Dr Cash $ 6,000
Cr Investment in Scope Products $ 6,000
1c. Dr Investment in Scope Products $16,000
Cr Income from Scope Products $16,000
1d. Dr Income from Scope Products $2,000
Cr Investment in Scope Products $2,000
20X7
2a. Dr Cash $8,000
Cr Investment in Scope Products $8,000
2b. Dr Investment in Scope Products $24,000
Cr Income from Scope Products $24,000
2c. Dr Income from Scope Products $2,000
Cr Investment in Scope Products $2,000
20X8
3a. Dr Cash $8,000
Cr Investment in Scope Products $8,000
3b. Dr Investment in Scope Products 32,000
Cr Income from Scope Products 32,000
3c. Dr Income from Scope Products $2,000
Cr Investment in Scope Products $2,000
2.$98,000
Explanation:
1. Preparation of the equity method entries that Pistol should record to account for this investment in 20X6, 20X7, and 20X8.
Equity Method Journal Entries for Pistol Corporation.
20X6
1a. Dr Investment in Scope Products $56,000
Cr Cash $56,000
1b. Dr Cash $ 6,000
Cr Investment in Scope Products $ 6,000
1c. Dr Investment in Scope Products $16,000
Cr Income from Scope Products $16,000
1d. Dr Income from Scope Products $2,000
Cr Investment in Scope Products $2,000
{ ($56,000-$10,000-$30,000) /8 years }
20X7
2a. Dr Cash $8,000
Cr Investment in Scope Products $8,000
2b. Dr Investment in Scope Products $24,000
Cr Income from Scope Products $24,000
2c. Dr Income from Scope Products $2,000
Cr Investment in Scope Products $2,000
{ ($56,000-$10,000-$30,000) /8 years }
20X8
3a. Dr Cash $8,000
Cr Investment in Scope Products $8,000
3b. Dr Investment in Scope Products 32,000
Cr Income from Scope Products 32,000
3c. Dr Income from Scope Products $2,000
Cr Investment in Scope Products $2,000
{ ($56,000-$10,000-$30,000) /8 years }
2. Calculation to determine the Balance in Investment in Scope Products.
Particulars Amount ($)
Initial Investment Amount $56,000
Add : Share of Income $72,000
($16,000+$24,000+$32,000)
Less : Dividend Received ($22,000)
($6,000+$8,000+$8,000)
Less : Patent Amortization ($6,000)
($2,000 * 3 years)
Balance in Investment in Scope Products Account as on Dec. 31 20X8 $98,000
Therefore the balance of the Investment in Scope account on Pistol balance sheet at December 31, 20X8, after all required equity method entries have been recorded is $98,000
A researcher wants to test the order of integration of some time series data. He decides to use the DF test. He estimates a regression of the form
delta yt = mu + si yt-1 + mut
and obtains the estimate ˆ? = -0.02 with standard error = 0.31.
(a) What are the null and alternative hypotheses for this test?
(b) Given the data, and a critical value of -2.88, perform the test.
(c) What is the conclusion from this test and what should be the next step?
(d) Why is it not valid to compare the estimated test statistic with the corresponding critical value from a t-distribution, even though the test statistic takes the form of the usual t-ratio?
Answer:
a) H0: u = presence of a unit root
HA: u ≠ presence of a unit root ( i.e. stationary series )
b) t stat = -0.064
c) We will reject the Null hypothesis and the next step will be to accept the alternative hypothesis
d) It is not valid to compare the estimated t stat with the corresponding critical value because a random walk is non-stationary while the difference is stationary because it is white noise
Explanation:
a) stating the null and alternative hypothesis
H0: u = presence of a unit root
HA: u ≠ presence of a unit root ( i.e. stationary series )
b) performing the test
critical value = -2.88
T stat = coefficient / std error
= -0.02 / 0.31 = -0.064
c) From the test, the value of T stat > critical value we will reject the Null hypothesis hence the next step will be to accept the alternative hypothesis
d) It is not valid to compare the estimated t stat with the corresponding critical value because a random walk is non-stationary while the difference is stationary because it is white noise
A company took a physical inventory at the end of the year and determined that $833,000 of goods were on hand. In addition, the following items were not included in the physical count:
Management determined that $96,000 of goods purchased were in transit that were shipped f.o.b. destination (goods were actually received by the company three days after the inventory count)
The company sold $40,000 worth of inventory f.o.b. destination.
What amount should Bell report as inventory at the end of the year?
Answer:
$873,000
Explanation:
Calculation of amount of inventory reported by Bell at the end of year :
Inventory amount = $833,000 + $40,000
Inventory amount = $873,000
Therefore, the amount that Bell should report as inventory at the end of the year is $873,000.
Suppose that 45% of all babies born in a particular hospital are girls. If 7 babies born in the hospital are randomly selected, what is the probability that at most of them are girls?
Answer:
0.10
Explanation:
Using the binomial probability formula: P(X = x) = (nCx) * p^x * (1 - p)^(n-x)
P(X≤1) = P(X = 0) + P(X = 1)
P(X≤1) = (7C0) * 0.45^0 * (0.55)^7 + (7C1) * 0.45^1 * (0.55)^6
P(X≤1) = 0.1024
P(X≤1) = 0.10
So, the Probability that at most one of them are girls 0.10.
You own a portfolio that has $2,600 invested in Stock A and $3,600 invested in Stock B. If the expected returns on these stocks are 12 percent and 15 percent, respectively, what is the expected return on the portfolio
Answer:
the expected return on the portfolio is $7,052
Explanation:
The computation of the expected return on the portfolio is shown below:
Stock A return = $2,600 + 12% of 2600 = $2,912
And,
Stock B return = $3,600 + 15% of 3600 = $4,140
So,
Expected return on portfolio is
= $2,912 + $4,140
= $7,052
hence, the expected return on the portfolio is $7,052
Andrews Co. can purchase 20,000 units of Part XYZ from a supplier for $18 per part. Andrews' per unit manufacturing costs for 20,000 units is as follows: Cost Per Unit Total Variable manufacturing cost $12 $240,000 Supervisor salary $3 $60,000 Depreciation $1 $20,000 Allocated fixed overhead $7 $140,000 If the part is purchased, the supervisor position will be eliminated. The special equipment has no other use and no salvage value. Total allocated fixed overhead would be unaffected by the decision. The company should ______.
Answer:
Andrews Co.
The company should ______.
should make the part.
Explanation:
a) Data and Calculations:
Costs to make Part XYZ:
Cost Per Unit Total
Variable manufacturing cost $12 $240,000
Supervisor salary $3 $60,000
Depreciation $1 $20,000
Allocated fixed overhead $7 $140,000
Units to be made or bought = 20,000 units
Cost to buy Part XYZ = $18 per part.
Relevant costs:
Make Buy Difference
Variable manufacturing cost $12
Supervisor salary $3
Total relevant cost per unit $15 $18 $3
Total costs $300,000 $360,000 $60,000
b) There is a cost-saving of $60,000 when Part XYZ is made internally. The cost of depreciation is not relevant in the decision since the equipment has no salvage value or any other use. Similarly, the fixed overhead will still be incurred, no matter the alternative chosen by the company.
what kind of life insurance policy issued by mutual insurer provides a return od divisible surplus
Answer:
participating life insurance policy <- A mutual insurer issues life insurance policies that provide a return of divisible surplus.
brainliest would help :)
Leander Mfg. has three support departments (human resources, administration, and maintenance) and two revenue-generating departments (assembly and finishing). The company uses the step method to allocate support department costs to operating departments. In October, human resources incurred $1,008,000 of costs, administration incurred $1,562,400, and maintenance incurred $476,000. Proportions of services provided to other departments for October follow. Human Resources Administration Maintenance Human resources 10% 5% Administration 10% 15 Maintenance 15 10 Assembly 40 50 45 Finishing 35 30 35 a. Assume that the departments are listed in a benefits-provided ranking. Note: Do not round proportions in your calculations; round your final answer to the nearest whole dollar. 1. What amount of cost should be assigned from human resources to each of the other departments
Answer:
Leander Mfg.
Human resources cost assigned to other departments:
Administration 100,800 (10%)
Maintenance 151,200 (15%)
Assembly 403,200 (40%)
Finishing 352,800 (35%)
Total HR costs $1,008,000
Explanation:
a) Data and Calculations:
Human Resource Administration Maintenance
Direct costs incurred $1,008,000 $1,562,400 $476,000
Human resources 10% 5%
Administration 10% 15
Maintenance 15 10
Assembly 40 50 45
Finishing 35 30 35
Allocation of Costs:
Human Resource Administration Maintenance
Direct costs incurred $1,008,000 $1,562,400 $476,000
Human resources ($1,008,000) 100,800 151,200
Administration 100,800 (10%) ($1,663,200) 184,800
Maintenance 151,200 (15%) 184,800 (10%) ($812,000)
Assembly 403,200 (40%) 924,000 (50%) 456,750 (45%)
Finishing 352,800 (35%) 554,400 (30%) 355,250 (35%)
Human resources cost assigned to other departments:
Administration 100,800 (10%)
Maintenance 151,200 (15%)
Assembly 403,200 (40%)
Finishing 352,800 (35%)
Total HR costs $1,008,000
Administration costs assigned to other departments:
Maintenance 184,800 ($1,663,200 * 10/90)
Assembly 924,000 ($1,663,200 * 50/90)
Finishing 554,400 ($1,663,200 * 30/90)
Total administration costs $1,663,200
Maintenance costs assigned to other departments:
Assembly 456,750 ($812,000 * 45/80)
Finishing 355,250 ($812,000 * 35/80)
Total administration costs $812,000
Type your answer in the box.
For a population with u = 25 and = 5, we would expect 90% of all x's calculated from n = 35 to
fall between
and
(Round to two decimals.)
Do you know the answer?
D Read about this
I know it
Think so
Unsure
No idea
Answer:
Your answer is given below:
Explanation:
During 2015, a construction company changed from the completed-contract method to the percentage-of-completion method for accounting purposes but not for tax purposes. Gross profit figures under both methods for the past three years appear below:
Completed-Contract Percentage-of-Completion
2013 $ 475,000 $ 900,000
2014 625,000 950,000
2015 700,000 1,050,000
$1,800,000 $2,900,000
Assuming an income tax rate of 40% for all years, the affect of this accounting change on prior periods should be reported by a credit of:____________
Answer:
$450,000
Explanation:
Calculation to determine , the affect of this accounting change on prior periods that should be reported by a credit of:
Using this formula
Accounting change on prior periods=(2013 Percentage-of-Completion+2014 Percentage-of-Completion)-(2013 Completed-Contract+2014 Completed-Contract)*(1-Tax rate)
Let plug in the formula
Accounting change on prior periods=[($900,000+$950,000)-($475,000+$625,000)]*(1-40%)
Accounting change on prior periods=($1,850,000-$1,100,000)*0.60
Accounting change on prior periods=$750,000*.60
Accounting change on prior periods=$450,000
Therefore Assuming an income tax rate of 40% for all years, the affect of this accounting change on prior periods should be reported by a credit of:$450,000
Suppose the ABC bank has excess reserves of $3,000 and checkable deposits of $50,000. If the reserve requirement is 20 percent, what is the size of the bank's actual reserves?
a. $53,000
b. $13,000
c. $10,000
d. $7,000
Answer:
b. $13,000
Explanation:
Calculation to determine the size of the bank's actual reserves
Using this formula
Actual reserves size=Excess reserves+(Checkable deposits*Reserve requirement)
Let plug in the formula
Actual reserves size=$3,000+(.20*$50,000)
Actual reserves size=$3,000+$10,000
Actual reserves size=$13,000
Therefore the size of the bank's actual reserves is $13,000
After Jim has gotten two different quotes for repairing his brakes, one from the dealership and one from a small, private mechanic, he choses to go with the small mechanic who has agreed to do his brakes for $200.00 less than the dealership. Jim takes his car to the mechanic who begins working on his brakes. After a week passes, the mechanic calls him and tells him he is in over his head and cannot fix his brakes. Jim goes over to pick up his car and finds his car in the mechanic's garage with the brakes disassembled around the mechanic's garage. What legal recourse does Jim have?
Answer:
Primary estoppel
Explanation:
Primary estoppel is defined as the principle that a promise made by a promisor is enforceable most especially when a promisee believes the promise and this leads to a subsequent detriment.
In the given scenario Jim used a small mechanic to repair his brakes and was assured he could do the job.
However the mechanic calls him and tells him he is in over his head and cannot fix his brakes, and finds his car in the mechanic's garage with the brakes disassembled around the mechanic's garage.
He can resort to primary estoppel as a legal recourse.
Given that the DM price of the ECU was 2.0583 and the DG price of the ECU was 2.3194. Then the DG price of the DM by cross rates is given by:______
a. DM = about 4.73 DG.
b. DM = about .26 DG.
c. DM = about 1.13 DG.odno
d. DM = about .89 DG.
Answer:
Option c (DM = about 1.13 DG) is the right approach.
Explanation:
Given:
DM price,
= 2.0583
DG price,
= 2.3194
Now,
By cross rates, the DG price of DM will be:
= [tex]\frac{2.3194}{2.0583}[/tex]
= [tex]1.13[/tex]
Thus the above is the correct option.
A point outside (to the right of) the production possibilities curve of a nation implies that this nation is using its resources fully. implies that there are unemployed resources in this nation. is easily attainable for this nation. is not attainable for this nation. Submit
Answer:
is not attainable for this nation
Explanation:
The Production possibilities frontiers is a curve that shows the various combination of two goods a company can produce when all its resources are fully utilised.
The PPC is concave to the origin. This means that as more quantities of a product is produced, the fewer resources it has available to produce another good. As a result, less of the other product would be produced. So, the opportunity cost of producing a good increase as more and more of that good is produced.
Point outside the curve or to the right of the curve means that the production level is not attainable given the level of resources
Points inside the production possibilities curve means that the nations resources are not being fully utilised
Factors that cause the PPF to shift
1. changes in technology.
2. changes in available resources.
3. changes in the labour force.
If a coupon bond has two years to maturity, a coupon rate of 10 %, a par value of $1000 , and a yield to maturity of 12 %, then the coupon bond will sell for $nothing . (Round your response to the nearest two decimal place) The price of a bond and its yield to maturity are ▼ positively related negatively related unrelated .
Answer:
The right solution is "$966.27".
Explanation:
Given values are:
Coupon rate,
= 10%
Par value,
= $1000
Yield of maturity,
= 12%
then,
Coupon will be:
= [tex]1000\times 10 \ percent[/tex]
= [tex]1000\times 0.1[/tex]
= [tex]100[/tex] ($)
Now,
The present value of coupon will be:
= [tex]A\times \frac{(1-(1+r)^n)}{r}[/tex]
By putting the value, we get
= [tex]100\times \frac{1-(1.12)^{-2}}{0.12}[/tex]
= [tex]100\times \frac{1-0.7971}{0.12}[/tex]
= [tex]100\times \frac{0.2029}{0.12}[/tex]
= [tex]169.08[/tex] ($)
The present value of par value will be:
= [tex]\frac{1000}{(1+12 \ percent)^2}[/tex]
= [tex]\frac{1000}{(1.12)^2}[/tex]
= [tex]797.19[/tex] ($)
hence,
The price of bond will be:
= [tex]Present \ value \ of \ coupon+Present \ value \ of \ par \ value[/tex]
= [tex]169.08+797.19[/tex]
= [tex]966.27[/tex] ($)
The diameter of a brand of tennis balls is approximately normally distributed, with a mean of 2.56
inches and a standard deviation of 0.04
inch. A random sample of 11
tennis balls is selected. Complete parts (a) through (d) below.
Answer:
sample mean = 2.63 inches
sample standard deviation = \frac{standard \hspace{0.15cm} deviation}{\sqrt{n} } = \frac{0.03}{\sqrt{9} } = \frac{0.03}{3} = 0.01
n
standarddeviation
=
9
0.03
=
3
0.03
=0.01
b) P(X < 2.61) = 0.0228
c.) P(2.62 < X < 2.64) = 0.6827
d.) Therefore 0.06 = P(2.6292 < X < 2.6307)
Step-by-step explanation:
i) the diameter of a brand of tennis balls is approximately normally distributed.
ii) mean = 2.63 inches
iii) standard deviation = 0.03 inches
iv) random sample of 9 tennis balls
v) sample mean = 2.63 inches
vi) sample standard deviation = \frac{standard \hspace{0.15cm} deviation}{\sqrt{n} } = \frac{0.03}{\sqrt{9} } = \frac{0.03}{3} = 0.01
n
standarddeviation
=
9
0.03
=
3
0.03
=0.01
vii) the sample mean is less than 2.61 inches = P(X < 2.61) = 0.0228
viii)the probability that the sample mean is between 2.62 and 2.64 inches
P(2.62 < X < 2.64) = 0.6827
ix) The probability is 6-% that the sample mean will be between what two values symmetrically distributed around the population measure
Therefore 0.06 = P(2.6292 < X < 2.6307)
