The weak ionization constant (Ka)
for HCN is equal to:

Explanation:

For preparing lyophobic sol, the substance in bulk is broken down into particles of colloidal dimensions (Dispersion) or aggregating smaller particles into particles of colloidal dimensions (condensation).

Answer:

IS IT MULTIPLE CHOICE

Explanation:

The question is incomplete, the complete question is:

A 7.00 L tank at [tex]21.4^oC[/tex] is filled with 5.43 g of sulfur hexafluoride gas and 14.2 g of sulfur tetrafluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction and partial pressure of each gas. Round each of your answers to significant digits.

Answer: The mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of sulfur hexafluoride = 5.43 g

Molar mass of sulfur hexafluoride = 146.06 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of sulfur hexafluoride}=\frac{5.43g}{146.06g/mol}=0.0372mol[/tex]

Given mass of sulfur tetrafluoride = 14.2 g

Molar mass of sulfur tetrafluoride = 108.07 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of sulfur tetrafluoride }=\frac{14.2g}{108.07g/mol}=0.1314mol[/tex]

Total moles of gas in the tank = [0.0372+ 0.1314] mol = 0.1686 mol

Mole fraction is defined as the moles of a component present in the total moles of a solution. It is given by the equation:

[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex] .....(2)

where n is the number of moles

Putting values in equation 2, we get:

[tex]\chi_{SF_6}=\frac{0.0372}{0.1686}=0.221[/tex]

[tex]\chi_{SF_4}=\frac{0.1314}{0.1686}=0.779[/tex]

Hence, the mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779

Answer:

climate change

Explanation:

climate change is driving force of evolution because when the climate is changed the animal and human need to adapt to it's natural change.

Answer:

false

Explanation:

False, water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.

Explanation:

So, from this, we can conclude that water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.

Learn more about types of molecules here:

brainly.com/question/3213630?referrer=searchResults

brainly.com/question/4979095?referrer=searchResults

Answer:

[tex]k= 0.145min^{-1}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out necessary for us remember that the first-order kinetics is given by:

[tex]ln(A/A_0)=-kt[/tex]

Whereas the 27.5% complete means A/Ao=0.275, and thus, we solve for the rate constant as follows:

[tex]k=\frac{ln(A/A_0)}{-t}[/tex]

Then, we plug in the variables to obtain:

[tex]k=\frac{ln(0.275)}{-8.90min}\\\\k= 0.145min^{-1}[/tex]

Regards!

i think its 2.0

Why do i think this-If you add 0.73g to 1.3g it comes to 2.0g

Answer:

Explanation:

From the given information:

The structure of the triacylglyceride can be seen in the first image attached below and the products produced as the result of the reaction between Crisco and sodium hydroxide (NaOH) are Glycerol and 3-Palmitic acid as shown in the second image below.

Lastly, the purpose of the addition of ethanol is because water and oils are not miscible. Thus, ethanol has the potential to mix and dissolve in water as well as in oil on a selective partial level. This method aids in the formation of water, soap, salt, and fatty acids from the interaction between fatty acid and sodium hydroxide. As a result, ethanol improves the interaction between the water and the oil. It is less polar to water and aids in the dissolution of nonpolar fats such that sodium hydroxide may react with ethanol.

Answer:

0.287 M

Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O

1.62 M

Explanation:

Step 1: Calculate the concentration of Ba(OH)₂

We will use the following expression.

[Ba(OH)₂] = mass Ba(OH)₂/ molar mass Ba(OH)₂ × liters of solution

[Ba(OH)₂] = 2.29 g/ 171.34 g/mol × 0.0466 L = 0.287 M

Step 2: Write the balanced neutralization equation

Ba(OH)₂ + 2 HClO₄ ⇒ Ba(ClO₄)₂ + 2 H₂O

Step 3: Calculate the reacting moles of Ba(OH)₂

25.5 mL of 0.287 M Ba(OH)₂ react.

0.0255 L × 0.287 mol/L = 7.32 × 10⁻³ mol

Step 4: Calculate the reacting moles of HClO₄

7.32 × 10⁻³ mol Ba(OH)₂ 2 mol HClO₄/1 mol Ba(OH)₂ = 0.0146 mol HClO₄

Step 5: Calculate the concentration of HClO₄

0.0146 moles of HClO₄ are in 8.99 mL of solution.

[HClO₄] = 0.0146 mol/0.00899 L = 1.62 M

When we pre-weigh a glass vial to hold our sample and find its mass to be 5.010 g. Then we add our sample to the vial and reweigh it on the same balance and find that the mass has increased to 6.130 g. The mass of the sample in grams is 1.12 g.

Avogadro's number is the number of units in one mole of any substance and equals to 6.02214076 × 10²³. The units can be electrons, atoms, ions, or molecules.

No. of moles is defined as a particular no. of particles that we can calculate with the help of Avogadro’s number.

Mass of a particular product is also find out by stoichiometry of a reaction as per the no. of mole given in the reaction.

Mass is generally can be represented by units like Kg, g etc.

Given,

weigh of glass vial = 5.010 g

weigh of glass vial with sample = 6.130 g

Therefore, When we pre-weigh a glass vial to hold our sample and find its mass to be 5.010 g. Then we add our sample to the vial and reweigh it on the same balance and find that the mass has increased to 6.130 g. The mass of the sample in grams is 1.12 g.

Learn more about mass, here:

https://brainly.com/question/19694949

#SPJ2

Answer:

2.11×10²³ atoms.

Explanation:

From the question given above, the following data were obtained:

Mass of Ne = 7 g

Number of atoms =?

Recall:

1 mole of Ne = 6.02×10²³ atoms

1 mole of Ne = 20 g

Thus,

20 g of Ne = 6.02×10²³ atoms

Finally, we shall determine the number of atoms in 7 g of Ne. This can be obtained as follow:

20 g of Ne = 6.02×10²³ atoms

Therefore,

7 g of Ne = (7 × 6.02×10²³) / 20

7 g of Ne = 2.11×10²³ atoms

Thus, 7 g of Ne contains 2.11×10²³ atoms.

Answer:

Yard . I hope this helped:))

Answer:

Firstly, the molecular formula of water would be H2O. Secondly, it expresses the amount of different atoms in the water molecule. In this case, H2 would be two Hydrogen atoms, and O would be 1 Oxygen atom.

Explanation:

Hope this helped!

Answer:

It basically means that water contains 2 atoms of Hydrogen and 1 atom of Oxygen.

Answer:

No reaction occurs.

Explanation:

The molecular reaction is as follows;

MgSO4(aq) + Ni(NO3)2(aq) ----> Mg(NO3)2(aq) + NiSO4(aq)

We can see from the reaction above that the both products of the reaction are soluble. Recall that a double replacement reaction often yields one insoluble product which separates as a precipitate.

This reaction does not occur since the two products that ought to be obtained are soluble in water.

Answer:

c it does not change the energy state

Explanation:

Answer:

Storage solution; deionized water; stabilizes.

Explanation:

The pH scale measures the concentration of hydrogen ions in acidic and alkaline solutions.

In chemistry, it literally means power of hydrogen ions and it is a measure of the molar concentration of hydrogen ions in a particular solution, thus specifying the acidity, neutrality or basicity of chemical solutions.

Mathematically, the pH of a solution is given by;

[tex] pH = -log_{10}(H^{+}) [/tex]

Hence, a solution with a pH of 7 is neutral. Also, a solution with a pH below 7 is acidic but basic (alkaline) if it's pH is above 7.

A pH meter can be defined as a scientific instrument or device designed and developed for the measurement of the hydrogen-ion concentration in water-based solutions, in order to determine their level of acidity or alkanility.

When using a pH meter to take a measurement, you should keep it in a storage solution until it is needed. Also, a deionized water should be used to rinse the pH meter and gently pat dry.

Furthermore, the pH meter should be placed in a given sample solution and a reading of the measurement taken when the pH of the solution stabilizes.

Answer:

27 g/mol of E

Explanation:

Note that percentage by mass= mass of each element present. So, since there is 90% of E, there is 90g of E present. By implication, there are 10g of H corresponding to 10%H. Note that there is 100g of EH3

1 moles of E corresponds to 90 g of E

Mole ratio of E: H= 1:3

Thus

Number of moles of H = 10g/ 1g/ mol = 10 moles of H

Since E contains 1/3 the number of moles of H

Number of moles of E = 1/3 × 10 = 3.33 moles of E

Molar mass of E= mass of E/ number of moles of E

Since mass of E = 90 g

Molar mass of E = 90g/3.33 moles

Molar mass of E = 27 g/mol

Answer:

c

Explanation:

it is because the chemical reaction will have the exposure to all the minerals with Microsoft word

Answer:

Explanation:

An electrophilic addition reaction occurs when an electrophile attacks a substrate, with the end result being the inclusion of one or many comparatively straightforward molecules along with multiple bonds.

In the given question, the hydrogen bromide provides the electrophile while the bromide is the nucleophile. The mechanism proceeds with the attack of the electrophile on the carbon, followed by deprotonation. This process is continued with a formation of carbocation and the bromide(nucleophile) finally bonds to the carbocation to form a stable product.

The first diagram showcases the possible various starting molecules for the synthesis while the second diagram illustrates their mechanism.

Answer:

Option B

Explanation:

From the question we are told that:

Equation

[tex]EX_4+Y_2->EX_3Y+XY[/tex]

Bond enthalpies are:

 [tex]Y-Y 109 kJ/mol,[/tex]

[tex]X-Y 123.1 kJ/mol[/tex]  

[tex]E-Y 290 kJ/mol.[/tex]

Generally the equation for the energy used to break E-X and Y-Y is mathematically given by

 [tex]E_2=109+x[/tex]

Therefore

Total Energy Liberated is

 [tex]E_T=E_1+E_2[/tex]

 [tex]E_T=413.1+109+x[/tex]

 [tex]E_T=304.1-x[/tex]

Since

  [tex]E_T+E_I[/tex]

Therefore

 [tex]304.1-x=243.6[/tex]

 [tex]x=60.5kJ/mol[/tex]

Option B

Explanation:

74.92 g.

(The mass of one mole of arsenic is 74.92 g.

Answer:

[tex]m=88.02g[/tex]

Explanation:

Hello there!

In this case, for this ideal gas law problem, it turns out necessary for us to remember that one mole of any gas is contained in 22.4 L at STP and therefore, we can use the following ratio to calculate the moles in 44.8 L of CO2:

[tex]\frac{1mol}{22.4L} =\frac{x}{44.8L}\\\\x= \frac{1mol*44.8L}{22.4L}=2mol[/tex]

Finally, since the molar mass of CO2 is 44.01 g/mol, we calculate the mass as follows:

[tex]m=2mol*\frac{44.01g}{1mol}\\\\m=88.02g[/tex]

Regards!

Answer:

0.0270w/v% H3PO4 in the soda

Explanation:

All phosphates reacts producing Ag3PO4. To solve this question we must convert the mass of Ag3PO4 to moles. These moles = moles of H3PO4. We can find, thus, the mass of H3PO4 and the w/v% as follows:

Moles Ag3PO4 -Molar mass: 418.58g/mol-

0.0576g * (1mol / 418.58g) = 1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4

Mass H3PO4 -Molar mass: 97.994g/mol-

1.376x10⁻⁴ moles Ag3PO4 = moles H3PO4 * (97.994g/mol) = 0.0135g H3PO4

w/v%:

0.0135g H3PO4 / 50.0mL * 100 =

Answer:

physical change because the gaseous water is chemically the same as the liquid

Explanation:

Matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.

Generally, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.

A physical change can be defined as a type of change that only affects the physical form of a chemical substance (matter) without having any effect on its chemical properties. Thus, a physical change would only affect the physical appearance and properties of a chemical substance (matter) but not its chemical properties.

This ultimately implies that, a physical change result in a change of matter from one form or phase (liquid, solid or gas) to another without a corresponding change in chemical composition.

Hence, the boiling of water is considered to be a physical change because the gaseous water is chemically the same as the liquid i.e there isn't any changes in chemical composition of water when boiling.

Explanation:

A structure in which valence electrons are depicted by dots is called a lewis structure.

For example, atomic number of oxygen is 8 and its electronic distribution is 2, 6.

Hence, the electron dot structure for [tex]O_{3}[/tex] molecule is as depicted in the picture attached.

Answer:

C) Both

Explanation:

Whenever we mix any pure form of a compound with some other form of a compound which is not in the other standard pure state, this results in the melting point of mixture to get dispersed and it becomes broad form.

Thus, when a known compound of 3-Nitroaniline mixes with both 3-Nitroaniline and 4-Nitrophenol, the melting point of the compound becomes depressed and board.

Thus the correct option is (C).

Answer:

2 ion 1+

Explanation:

Answer:

0.414 mole (3 sig. figs.)

Explanation:

Given grams, moles = mass/formula weight

moles in 18.2g CO₂(g) = 18.2g/44g/mole = 0.413636364 mole (calc. ans.)

≅ 0.414 mole (3 sig. figs.)

Answer:

F-

Explanation:

Since Fluorine needs one more electron to reach a full octet, it takes in 1 more electron to become an anion. Therefore, with the extra negative charge from the 1 electron, a Fluoride ion has a charge of -1.

Hope this helped!

Answer:

F_

Explanation:

the symbol or formula

is F_

Answer:

b

Explanation:

The figures of a number that are noteworthy in high accuracy or precision are known as significant figures. They are as follows:

From the given information:

To (3) sig. fig: 5578 L = 558 L