Answer:
click on the link
Explanation:
link is somewhere hidden
One way to add a table to a presentation is to click on Clip Art under the Insert tab. click on WordArt under the Insert tab. right-click on an existing page with content and choose Add Table. add a new slide and left-click on the Table symbol in an empty area.
Which line of code will use the overloaded multiplication operation?
class num:
def __init__(self,a):
self.number = a
def __add__(self,b):
return self.number + 2 * b.number
def __mul__(self, b):
return self.number + b.number
def __pow__(self, b):
return self.number + b.number
# main program
numA = num(5)
numB = num(10)
Which line of code will use the overloaded multiplication operation?
class num:
def __init__(self,a):
self.number = a
def __add__(self,b):
return self.number + 2 * b.number
def __mul__(self, b):
return self.number + b.number
def __pow__(self, b):
return self.number + b.number
# main program
numA = num(5)
numB = num(10)
a) product = numA * numB
b) product = numA.multiply(numB)
c) product = numA.mul(numB
For multiplication one: product = numA * numB
For the addition: result = numA + numB
got 100 on this ez
(searched all over internet and no one had the answer lul hope this helps!)
Answer: First option: product = numA * numB
second option-numA + numB
Explanation:
Page Setup options are important for printing a PowerPoint presentation a certain way. The button for the Page Setup dialog box is found in the
File tab.
Home tab.
Design tab.
Slide Show tab.
Answer: Design tab
Explanation:
The page setup simply refers to the parameters which are defined by a particular user which is vital in knowing how a printed page will appear. It allows user to customize the page layout. The parameters include size, page orientation, quality of print,margin etc.
It should be noted that page setup options are vital for printing a PowerPoint presentation in a certain way and the button for the Page Setup dialog box can be found in the design tab.
is used for finding out about objects, properties and methods
Answer:
science
Explanation:
which shortcut can we use to make directional heading of a cuboid more obvious while in the lidar view
Answer:
cutting across
Explanation:
What is the main fuction of command interpreter
The command interpreter or the command-line interface is one of the ways a user can interface with the operating system. The command interpreter's main task is to understands and executes commands which it turns into system calls. The kernel is the central module of an OS.
_________________
Brainliest would be greatly appreciated!
I found this!
_________________
#SpreadTheLove
#SaveTheTrees
- Mitsu JK
what is the best plugin for subscription sites?
Answer:
Explanation:
MemberPress. MemberPress is a popular & well-supported membership plugin. ...
Restrict Content Pro. ...
Paid Memberships Pro. ...
Paid Member Subscriptions. ...
MemberMouse. ...
iThemes Exchange Membership Add-on. ...
Magic Members. ...
s2Member.
write the C program
The function turn_to_letter decides on the letter grade of the student according to the table below from the visa and final grades sent into it and returns it, write it together with a main function which the turn_to_letter function is called and prints the letter equivalent on the screen. -Success score = 40% of midterm + 60% of final,
-F for the success score below 50, D for between 50 and 59, C for between 60 and 69, B for between 70 and 79, A for 80 and above.
Answer:
The program in C is as follows:
#include <stdio.h>
char turn_to_letter(double score){
char lettergrade = 'A';
if(score>=80){ lettergrade = 'A'; }
else if(score>=70){ lettergrade = 'B'; }
else if(score>=60){ lettergrade = 'C'; }
else if(score>=50){ lettergrade = 'D'; }
else{lettergrade = 'F';}
return lettergrade;
}
int main(){
int midterm, final;
double score;
printf("Midterm: "); scanf("%d", &midterm);
printf("Final: "); scanf("%d", &final);
score = 0.4 * midterm + 0.6 * final;
printf("Score: %lf\n", score);
printf("Letter Grade: %c",turn_to_letter(score));
return 0;
}
Explanation:
The function begins here
char turn_to_letter(double score){
This initializes lettergrade to A
char lettergrade = 'A';
For scores above or equal to 80, grade is A
if(score>=80){ lettergrade = 'A'; }
For scores above or equal to 70, grade is B
else if(score>=70){ lettergrade = 'B'; }
For scores above or equal to 60, grade is C
else if(score>=60){ lettergrade = 'C'; }
For scores above or equal to 50, grade is D
else if(score>=50){ lettergrade = 'D'; }
Grade is F for other scores
else{lettergrade = 'F';}
This returns the letter grade
return lettergrade;
}
The main begins here
int main(){
This declares the midterm and final scores as integer
int midterm, final;
This declares the total score as double
double score;
These get input for midterm score
printf("Midterm: "); scanf("%d", &midterm);
These get input for final score
printf("Final: "); scanf("%d", &final);
This calculates the total score
score = 0.4 * midterm + 0.6 * final;
This prints the calculated total score
printf("Score: %lf\n", score);
This calls the turn_to_letter function and prints the returned letter grade
printf("Letter Grade: %c",turn_to_letter(score));
return 0;
}
This program exercise #4 wants the user to write a program in python that contains a list of movies titles, years and movie rating. You will need to display a menu option that allows the user to list all of the movies, add a movie, delete a movie and exit out of the program. This will be done using lists and the functions to add an element to a list and how to delete an element to a list. The program should be written utilizing functions in python for the main function, the display_menu function, the delete function, the add function and the list movie function. You can place this all in one python file or include them in various python files that include them into the main program. Let me know if you have any questions with this exercise. Output Screen: COMMAND MENU list - List all movies add - Add a movie del - Delete a movie exit - Exit program Command List: list 1. Monty Python and the Holy Grail, 1979, R 2. On the Waterfront, 1954, PG 3. Cat on a Hot Tim Roof, 1958, R Command: add Name: Gone with the Wind Year: 1939 Rating: PG Gone with the Wind was added.
Answer:
The program in Python is as follows:
def display_menu(titles,years,ratings):
for i in range(len(titles)):
print(str(i+1)+". "+titles[i]+", "+str(years[i])+", "+str(ratings[i]))
def delete(titles,years,ratings):
del_item = input("Movie: ")
if del_item in titles:
print(del_item,"was deleted")
index = titles.index(del_item)
titles.pop(index)
years.pop(index)
ratings.pop(index)
return(titles,years,ratings)
def add(titles,years,ratings):
title = input("Title: ")
year = int(input("Year: "))
rating = int(input("Ratings: "))
print(title,"was added")
titles.append(title)
years.append(year)
ratings.append(rating)
return(titles,years,ratings)
titles = []
years = []
ratings = []
print("COMMAND MENU list\nlist - List movies\nadd - Add movie del\ndel - Delete movie exit\nexit - Exit program")
menu = (input("Command List: "))
while(menu.lower() == "list" or menu.lower() == "add" or menu.lower() == "del"):
if menu.lower() == "list":
display_menu(titles,years,ratings)
elif menu.lower() == "add":
titles, years, ratings = add(titles,years,ratings)
elif menu.lower() == "del":
titles, years, ratings = delete(titles,years,ratings)
menu = (input("Command List: "))
elif menu.lower() == "exit":
break
print("Exited!!!")
Explanation:
See attachment for complete program where comments are used to explain some lines of the program
what connect webpages?
Answer:
"Hypertext links are those words that take you from one web page to another when you click them with your mouse. Although the same HTML tag you study in this hour is also used to make graphical images into clickable links, graphical links aren't explicitly discussed here" I got this from https://www.informit.com/articles/article.aspx?p=440289 sorry I couldnt take the time myself here to help :(
Explanation:
You have been given an encrypted copy of the Final exam study guide here, but how do you decrypt and read it???
Along with the encrypted copy, some mysterious person has also given you the following documents:
helloworld.txt -- Maybe this file decrypts to say "Hello world!". Hmmm.
hints.txt -- Seems important.
In a file called pa11.py write a method called decode(inputfile,outputfile). Decode should take two parameters - both of which are strings. The first should be the name of an encoded file (either helloworld.txt or superdupertopsecretstudyguide.txt or yet another file that I might use to test your code). The second should be the name of a file that you will use as an output file. For example:
decode("superDuperTopSecretStudyGuide.txt" , "translatedguide.txt")
Your method should read in the contents of the inputfile and, using the scheme described in the hints.txt file above, decode the hidden message, writing to the outputfile as it goes (or all at once when it is done depending on what you decide to use).
Hint: The penny math lecture is here.
Another hint: Don't forget about while loops...
Answer:
Explanation:
Write a C program that right shifts an integer variable 4 bits. The program should print the integer in bits before and after the shift operation. Does your system place 0s or 1s in the vacated bits?
Solution :
#include<[tex]$\text{stdio.h}$[/tex]>
#include<conio.h>
void dec_bin(int number) {
[tex]$\text{int x, y}$[/tex];
x = y = 0;
for(y = 15; y >= 0; y--) {
x = number / (1 << y);
number = number - x * (1 << y);
printf("%d", x);
}
printf("\n");
}
int main()
{
int k;
printf("Enter No u wanted to right shift by 4 : ");
scanf("%d",&k);
dec_bin(k);
k = k>>4; // right shift here.
dec_bin(k);
getch();
return 0;
}
You want a cable that could be used as a bus segment for your office network. The cable should also be able to support up to 100 devices. Which cable should you use?
A.
RG-6
B.
RG-8
C.
RG-58U
D.
RG-59
Answer: C
Explanation:
17. What are the basic modes of operation of 8255?Write the features of mode 0 in 8255?
Answer:
There are two basic operational modes of 8255:
Bit Set/Reset mode (BSR mode).
Input/Output mode (I/O mode).
Features of 8255 Microprocessor:
Mode 0 : Simple Input/Output.
Mode 1 : Input/Output with handshake.
Mode 2 : Bi-directional I/O data transfer.
It has three 8-bit ports : Port A, Port B, and Port C, which are arranged in two groups of 12 pins.
The 8255 can operate in 3 I/O modes : (i) Mode 0, (ii) Mode 1, & (iii) Mode 2.
3.4 code practice question 2 edhesive
Write a MIPS assembly language program that prompts for a user to enter a series of floating point numbers and calls read_float to read in numbers and store them in an array only if the same number is not stored in the array yet. Then the program should display the array content on the console window.
Consult the green sheet and the chapter 3 for assembly instructions for floating point numbers. Here is one instruction that you might use:
c.eq.s $f2, $f4
bc1t Label1
Here if the value in the register $f2 is equals to the value in $f4, it jumps to the Label1. If it should jump when the value in the register $f2 is NOT equals to the value in $f4, then it should be:
c.eq.s $f2, $f4
bc1f Label1
To load a single precision floating point number (instead of lw for an integer), you might use:
l.s $f12, 0($t0)
To store a single precision floating point number (instead of sw for an integer), you might use:
s.s $f12, 0($t0)
To assign a constant floating point number (instead of li for an integer), you might use:
li.s $f12, 123.45
To copy a floating point number from one register to another (instead of move for an integer), you might use:
mov.s $f10, $f12
The following shows the syscall numbers needed for this assignment.
System Call System Call System Call
Number Operation Description
2 print_float $v0 = 2, $f12 = float number to be printed
4 print_string $v0 = 4, $a0 = address of beginning of ASCIIZ string
6 read_float $v0 = 6; user types a float number at keyboard; value is store in $f0
8 read_string $v0 = 8; user types string at keybd; addr of beginning of string is store in $a0; len in $a1
------------------------------------------
C program will ask a user to enter numbers and store them in an array
only if the same number is not in the array yet.
Then it prints out the result array content.
You need to write MIPS assembly code based on the following C code.
-------------------------------------------
void main( )
{
int arraysize = 10;
float array[arraysize];
int i, j, alreadyStored;
float num;
i = 0;
while (i < arraysize)
{
printf("Enter a number:\n");
//read an integer from a user input and store it in num1
scanf("%f", &num);
//check if the number is already stored in the array
alreadyStored = 0;
for (j = 0; j < i; j++)
{
if (array[j] == num)
{
alreadyStored = 1;
}
}
//Only if the same number is not in the array yet
if (alreadyStored == 0)
{
array[i] = num;
i++;
}
}
printf("The array contains the following:\n");
i = 0;
while (i < arraysize)
{
printf("%f\n", array[i]);
i++;
}
return;
}
Here are sample outputs (user input is in bold): -- note that you might get some rounding errors
Enter a number:
3
Enter a number:
54.4
Enter a number:
2
Enter a number:
5
Enter a number:
2
Enter a number:
-4
Enter a number:
5
Enter a number:
76
Enter a number:
-23
Enter a number:
43.53
Enter a number:
-43.53
Enter a number:
43.53
Enter a number:
65.43
The array contains the following:
3.00000000
54.40000153
2.00000000
5.00000000
-4.00000000
76.00000000
-23.00000000
43.52999878
-43.52999878
65.43000031
Explanation:
Here if the value in the register $f2 is equals to the value in $f4, it jumps to the Label1. If it should jump when the value in the register $f2 is NOT equals to the value in $f4, then it should be
Which of the following best explains how an analog audio signal is typically represented by a computer?
a. An analog audio signal is measured at regular intervals. Each measurement is stored as a sample, which is represented at the lowest level as a sequence of bits.
b. An analog audio signal is measured as a sequence of operations that describe how the sound can be reproduced. The operations are represented at the lowest level as programming instructions.
c. An analog audio signal is measured as input parameters to a program or procedure. The inputs are represented at the lowest level as a collection of variables.
d. An analog audio signal is measured as text that describes the attributes of the sound. The text is represented at the lowest level as a string.
Answer:
A. An analog audio signal is measured at regular intervals. Each measurement is stored as a sample, which is represented at the lowest level as a sequence of bits.
Explanation:
I took the test
What’s unique about windows 8 compared to earlier windows
Sorting Records in a Form
Use the drop-down menus to complete the steps for sorting records in a form.
1. Open the form in the standard form view.
2. Put the cursor in the
to use for sorting.
3. Open the
4. In the Sort & Filter group, click
v tab.
Answer:
1. Open the form in the standard form view.
2. Put the cursor in the field to use for sorting.
3. Open the Home tab
4. In the Sort & Filter group, click ascending or descending
Explanation:
Took the test :)
The complete forum to complete the steps for sorting records in a form is discussed below:
What do you mean by speed records?You can specify the order of the records that are returned for each navigation query by sorting. It can be adjusted either globally or for each query. You can specify the number of characteristics and the ascending or descending order of pairs of values when submitting a simple navigation request.
Launch the default form view by opening the form.
2. Position the cursor within the field you want to sort.
3. Click on the Home tab.
4. Select either ascending or descending in the Sort & Filter group.
Learn more about sorting records here:
https://brainly.com/question/13130958
#SPJ1
Which work habits should you follow to increase work efficiency and avoid health issues?
Answer:
Just get good sleep, eat breakfast, and exercise.
Answer:
take periodic breaks and alternate between tasks
Code.org lesson 8 level 5
Answer:
and?
Explanation:
a) Why is eavesdropping done in a network?
b) Solve the following using checksum and check the data at the
receiver:
01001101
00101000
Answer:
An eavesdropping attack is the theft of information from a smartphone or other device while the user is sending or receiving data over a network.
Missing: checksum 01001101 00101000
answer any one: write a computer program:
Answer:
hope this helps you look it once.
-1
Draw a flowchart to input two
numbers in variables M and N and
print the multiplication table from 1*1
to M*N
Answer:A flowchart is a diagram that depicts the steps involved in solving a problem. The following flowchart shows how to output the multiplication table ( n * 1 to m * 1) of a number, n and m:
Which of the following is not the disadvantage of closed
network model?
Select one:
O Flexibility
O Public network connection
O Support
O External access
Answer:
public network connection
Answer:
public network connection
Which tab should you click if you want to access the Show All Comments option in a worksheet?
Home
Page Layout
Review
View
Answer: Review
Because you want to review the comments
Answer:
C.) Reivew
Explanation:
Doing it on EDG now!
Best luck to yall :3
Have a good day and byee
answer any one: write a computer program:
Answer:
hope this helps you look it once
Can someone plz answer these questions
Answer:
11001100 = 204
11111111 = 255
Explanation:
For 11001100:
1*2⁷ + 1*2⁶ + 0*2⁵ + 0*2⁴ + 1*2³ + 1*2² + 0*2¹ + 0*2⁰ = 204
Just replace 1's by 0's in the following calculation to do it for every 8 bit number:
1*2⁷ + 1*2⁶ + 1*2⁵ + 1*2⁴ + 1*2³ + 1*2² + 1*2¹ + 1*2⁰ = 255
If you don't want to do the calculation yourself, you can set the windows calculator in programmer mode, then select binary and key in the number.
Use the drop-down menus to explain how to set up a lookup field to use a combo box control with a list of options. 1. Open a table in Design view, and right-click a field. 2. Select Change To in the drop-down menu, then select . 3. On the Data tab of the , make a number of choices. 4. For the Row Source Type, choose . 5. For Limit to List, select . 6. For Row Source, click the ellipsis and enter the values in the dialog box that opens. 7. Close the Property Sheet, and save the form.
Answer:
Combo Box, Property Sheet, Value List, Yes
Explanation:
Use the drop-down menus to explain how to set up a lookup field to use a combo box control with a list of options are the combo box, vause lkist.
What is the distinction between a mixture container and a drop-down listing?A drop-down listing is a listing wherein the chosen object is constantly seen, and the others are seen on call for via way of means of clicking a drop-down button. A combo container is a mixture of a listing container or a drop-down listing and an editable textual content container, as a consequence permitting customers to go into a fee that isn't always withinside the listing.
A drop-down listing in Access 2013 gives a listing of values to useful resources in statistics access in tables or forms. Although you could permit customers to manually input values that do not exist withinside the drop-down listing, you will want to disable this selection to limition alternatives to tiered values.
Read more about the combo box control:
https://brainly.com/question/17238933
#SPJ2
A line beginning with a # will be transmitted to the programmer’s social media feed.
A.
True
B.
False
Answer:
True?
Explanation:
Answer:
The answer is false.
Explanation:
A “#” doesn’t do that in Python.
