Thiết bị trao đổi nhiệt ngược chiều, nhiệt độ chất lỏng nóng vào là 310°C, ra là 115°c. Nhiệt độ chất lỏng lạnh vào là 25°c và ra là 68°c. Hãy tính độ chênh lệch nhiệt độ trung bình ∆t(m)

Explanation:

mặt đất với vận tốc ban đầu 20m/s. Bỏ qua mọi ma sát, lấy g = 10 m/s2. Độ cao cực đại mà vật đạt được là.

Answer:

wavelength= 1.05 × 10^ -46 m

Explanation:

the formula : λ= hc/E

where; "h" = Planck's constant [6.626 × 10^ -34]

c= speed of light [3.0 × 10^ 8]

you first have to convert the energy of the photon to Joules by dividing the constant by 1000

2.09 × 10^ -18 / 1000 = 2.09 × 10^ -21

then you replace you data into the equation

λ= 6.626 × 10^ -34 × 3.0 × 10^ 8 / 2.09 × 10 ^ -21

first multiply the Planck's constant and the speed of light then divide it by the energy which is in "Joules"

:. λ = 1.05 × 10^ -46

hope this helps

Since the frequencies are unrelated, and there are a large number of them, I'll say this represents an example of noise.

Answer:

The angle is 153.9 degree.

Explanation:

Let the magnetic field is B and the charge is q. Angle = 26.1 degree

The force is F.

Let the angle is A'.

Now equate the magnetic forces

[tex]q v B sin 26.1 = q v B sin A'\\\\A' = 180 - 26.1 = 153.9[/tex]

Answer:

Answer is in the picture.

Explanation:

Answer is in the picture.

[tex]\textsf{When an electron is hit by a }[/tex] [tex]\textsf{photon of light, it absorbs the quanta}[/tex] [tex]\textsf{of energy the photon was carrying}[/tex] [tex]\textsf{and moves to a higher energya}[/tex] [tex]\textsf{ state. Electrons therefore have to }[/tex] [tex]\textsf{jump around within the atom as }[/tex] [tex]\textsf{they either gain or lose energy. }[/tex]

When an electron is hit by a photon of light, it absorbs the quanta of energy the photon was carrying and moves to a higher energy state. Electrons therefore have to jump around within the atom as they either gain or lose energy.

Hope this answer helps you..!!!

.

.

Select it as the BRAINLIEST..!!

Answer:

The amplitude of vibration of the spring is "24 cm"

The periodic vibrating body's motion follows a sinusoidal path. This sinusoidal path is illustrated in the attached picture.

From the picture, it can be clearly seen that the amplitude of the periodic vibration motion is the distance from its mean position to the highest point.

Since the distance of both the highest and the lowest points from the mean position is the same. Therefore, the distance between the lowest and the highest point must be equal to two times the amplitude of the wave.

Amplitude = 24 cm

Answer:

1.2 seconds

Explanation:

Answer to the following question is 1.2 seconds

Because light from the moon takes 1.2 seconds to reach Earth, the light released from the crescent immediately before it vanishes will also take 1.2 seconds to reach Earth. As a result, the earth-shine portion of the moon will vanish 1.2 seconds after the crescent has vanished.

Answer:

The constant minimum deceleration required to stop the car in time to avoid pileup is 6.32 m/s²

Explanation:

From the question, the car is traveling at 118 km/h, that is the initial velocity, u = 118km/h

The distance between the car and the accident at the moment when the driver sees the accident is 85 m, that is s = 85 ,

Since the driver slams on the brakes and the car will come to a stop, then the final velocity, v = 0 km/h = 0 m/s

First, convert 118 km/h to m/s

118 km/h = (118 × 1000) /3600 = 32.7778 m/s

∴ u = 32.7778 m/s

Now, to determine the deceleration, a, required to stop,

From one of the equations of motion for linear motion,

v² = u² + 2as

Then

0² = (32.7778)² + 2×a×85

0 = 1074.3841 + 170a

∴ 170a = - 1074.3841

a = - 1074.3841 / 170

a = - 6.3199

a ≅ - 6.32 m/s²

Hence, the constant minimum deceleration required to stop the car in time to avoid pileup is 6.32 m/s²

Answer:

This causes the amplitude of the oscillation to decay over time. The damped oscillation frequency does not equal the natural frequency. Damping causes the frequency of the damped oscillation to be slightly less than the natural frequency

Answer:

the magnitude of the magnetic force on the wire segment is 6.03 x 10⁻⁶ N

Explanation:

Given;

length of the conductor, L = 1 cm = 0.01 m

current carried by the solenoid, I₁ = 15 A

radius of the solenoid, r = 4 cm

number of turns per length of the solenoid, n = 800 turns/m

current carried by the solenoid, I₂ = 40 mA = 0.04 A

The magnetic field of the solenoid is calculated as;

B = μnI₂

where;

μ is the permeability of free space = 4π x 10⁻⁷ Tm/A

B = ( 4π x 10⁻⁷) x (800) x (0.04)

B = 4.022 x 10⁻⁵ T

The magnitude of the magnetic force on the wire segment is calculated as;

F = BI₁L sinθ

where

θ is the angle made by the wire segment against the solenoid = 90⁰

F = (4.022 x 10⁻⁵) x (15) x (0.01) x sin(90)

F = 6.03 x 10⁻⁶ N

Therefore, the magnitude of the magnetic force on the wire segment is 6.03 x 10⁻⁶ N

Answer:

The initial velocity is 1.27 m/s.

Explanation:

distance, s = 1.8 m

acceleration, a = - 0.45 m/s^2

final velocity, v = 0

let the initial velocity is u.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s \\\\0 = u^2 - 2 \times 0.45\times 1.8\\\\u = 1.27 m/s[/tex]

We have that the Initial velocity  is mathematically given as

u=1.27m/s

Question Parameters:

a slight push toward an end stop 1.80 meters away

he fan of the cart engages and slows the cart with an acceleration of -0.45 m/s2

Generally the equation for the  third equation of motion    is mathematically given as

Vf^2 = Vi^2 + 2ad

Therefore

0=u^2+0.45*1.8

u=1.27m/s

For more information on velocity visit

https://brainly.com/question/17617636

Answer:

red blood cell, also called erythrocyte

Explanation:

Hope it helps

Mark me as Brainliest plz

:DD

Answer:

Electric field at A = 9.28 x 10¹² N/C

Explanation:

Given:

K = 8.99 x 10¹² N/C

Missing information:

Length = 11 cm = 11 x 10⁻² m

q = 12.5 C

Find:

Electric field at A

Computation:

Electric field = Kq / r²

Electric field at A = [(8.99 x 10¹²)(12.5)] / [11 x 10⁻²]²

Electric field at A = 9.28 x 10¹² N/C

Answer:

The longest wavelength for closed at one end and open at the other is

y / 4      where y is the wavelength - that is node - antinode

The next possible wavelength is 3 y / 4 -    node - antinode - node -antinode

y / 4 = 3 m     y = 12 meters    the longest wavelength

3 y / 4 = 3 m      y = 4 meters   1 / 3 times as long

Answer:

it will drop simultaneously

Answer:

375 is the answer.

Explanation:

Speed : Distance / Time taken

S: m/ s

s: 1500/4

375 m / s answer

Answer:

375m per minute

Explanation:

if you are looking for a diffrent unit just multiply your answer by however many minutes are in that time frame

The resistance R = 20 Ω

The capacitance C = 106.1 μF

The current, I is 2.773 A at 56.31°.

The phase angle of the between the current and the voltage is 56.31° leading.

Since the impedance Z = 20 - j30 Ω, the resistance, R is the real part of the impedance. So R = ReZ = 20 Ω

So, the resistance R = 20 Ω

To find the capacitance, we need first to find the reactance of the capacitor X. Since the impedance Z = 20 - j30, the reactance of the capacitor X. is the imaginary part of the impedance. So X = ImZ = 30 Ω.

Now the reactance of the capacitor X = 1/ωC where ω = angular frequency of the circuit = 2πf where f = frequency of the circuit = 50 Hz and C = capacitance  

So, C = 1/ωX = 1/2πfX

Substituting the values of the variables into the equation, we have

C = 1/2πfX

C = 1/(2π × 50 Hz × 30 Ω)

C = 1/3000π

C = 1/9424.778

C = 1.061 × 10⁻⁴ F

C = 106.1 × 10⁻⁶ F

C = 106.1 μF

So, the capacitance is 106.1 μF

The current I = V/Z where V = voltage = 100 V at 0° and Z = impedance.

The magnitude of Z = √(20² + (-30)²)

= √(400 + 900)

= √1300

= 36.06 Ω

and its angle Φ = tan⁻¹(ImZ/ReZ)

= tan⁻¹(-30/20)

= tan⁻¹(-1.5) = -56.31°

So, V = 100 ∠ 0° and Z = 36.06 ∠ -56.31°

So, the current, I = V/Z =  (100 ∠ 0°)/36.06 ∠ -56.31°

= 100/36.06 ∠(0° - (-56.31° ))

= 2.773 ∠ 56.31° A

So, the current is 2.773 A at 56.31°.

Since the current is 2.773 A at 56.31°, the phase angle of the between the current and the voltage is 56.31° leading.

So, the phase angle of the between the current and the voltage is 56.31° leading.

Learn more about alternating voltage here:

https://brainly.com/question/20345565

Answer:

a) The x-position of the skateboarder is 0.324 meters.

b) The y-position of the skateboarder is -2.16 meters.

c) The x-velocity of the skateboard is 1.08 meters per second.

d) The y-velocity of the skateboard is -3.6 meters per second.

Explanation:

a) The x-position of the skateboarder is determined by the following expression:

[tex]x(t) = x_{o} + v_{o,x}\cdot t + \frac{1}{2}\cdot a_{x} \cdot t^{2}[/tex] (1)

Where:

[tex]x_{o}[/tex] - Initial x-position, in meters.

[tex]v_{o,x}[/tex] - Initial x-velocity, in meters per second.

[tex]t[/tex] - Time, in seconds.

[tex]a_{x}[/tex] - x-acceleration, in meters per second.

If we know that [tex]x_{o} = 0\,m[/tex], [tex]v_{o,x} = 0\,\frac{m}{s}[/tex], [tex]t = 0.60\,s[/tex] and [tex]a_{x} = 1.8\,\frac{m}{s^{2}}[/tex], then the x-position of the skateboarder is:

[tex]x(t) = 0\,m + \left(0\,\frac{m}{s} \right)\cdot (0.60\,s) + \frac{1}{2}\cdot \left(1.8\,\frac{m}{s^{2}} \right) \cdot (0.60\,s)^{2}[/tex]

[tex]x(t) = 0.324\,m[/tex]

The x-position of the skateboarder is 0.324 meters.

b) The y-position of the skateboarder is determined by the following expression:

[tex]y(t) = y_{o} + v_{o,y}\cdot t + \frac{1}{2}\cdot a_{y} \cdot t^{2}[/tex] (2)

Where:

[tex]y_{o}[/tex] - Initial y-position, in meters.

[tex]v_{o,y}[/tex] - Initial y-velocity, in meters per second.

[tex]t[/tex] - Time, in seconds.

[tex]a_{y}[/tex] - y-acceleration, in meters per second.

If we know that [tex]y_{o} = 0\,m[/tex], [tex]v_{o,y} = -3.6\,\frac{m}{s}[/tex], [tex]t = 0.60\,s[/tex] and [tex]a_{y} = 0\,\frac{m}{s^{2}}[/tex], then the x-position of the skateboarder is:

[tex]y(t) = 0\,m + \left(-3.6\,\frac{m}{s} \right)\cdot (0.60\,s) + \frac{1}{2}\cdot \left(0\,\frac{m}{s^{2}}\right)\cdot (0.60\,s)^{2}[/tex]

[tex]y(t) = -2.16\,m[/tex]

The y-position of the skateboarder is -2.16 meters.

c) The x-velocity of the skateboarder ([tex]v_{x}[/tex]), in meters per second, is calculated by this kinematic formula:

[tex]v_{x}(t) = v_{o,x} + a_{x}\cdot t[/tex] (3)

If we know that [tex]v_{o,x} = 0\,\frac{m}{s}[/tex], [tex]t = 0.60\,s[/tex] and [tex]a_{x} = 1.8\,\frac{m}{s^{2}}[/tex], then the x-velocity of the skateboarder is:

[tex]v_{x}(t) = \left(0\,\frac{m}{s} \right) + \left(1.8\,\frac{m}{s} \right)\cdot (0.60\,s)[/tex]

[tex]v_{x}(t) = 1.08\,\frac{m}{s}[/tex]

The x-velocity of the skateboard is 1.08 meters per second.

d) As the skateboarder has a constant y-velocity, then we have the following answer:

[tex]v_{y} = -3.6\,\frac{m}{s}[/tex]

The y-velocity of the skateboard is -3.6 meters per second.

Explanation:

Hope it Will help he hsuejwoamxgehanwpalasmbwfwfqoqlmdbehendalmZbgevzuxwllw. yeh we pabdvddxhspapalw. X

The angular separation (in degrees) between the second and the third orders on the same side of the central bright fringe if the wavelength is 500 nm and A diffraction grating has 6000 lines per centimeter ruled on it, is  27.29°.

Waves spreading outward around obstructions are known as diffraction. Sound, electromagnetic radiation like light, X-rays, and gamma rays, as well as very small moving particles like atoms, neutrons, and electrons that exhibit wavelike qualities all exhibit diffraction.

Given:

The number of lines = 6000 per cm,

The Wavelength, λ = 500 nm = 500 × 10 ⁻⁹ m

Calculate the diffraction grating,

[tex]d = 1 / no\ of\ lines[/tex]

d = 10⁻² / 6000 m,

Calculate the second-order maxima angle and third-order maxima angle by the formula given below,

[tex]dsin\theta_1 = n_1 \lambda[/tex]

[tex]sin\theta_1 = n_1\lambda / d[/tex]

[tex]\theta _1 = sin^{-1}[2\times 500\times 10 ^{-9}/10^{-2}\times 6000][/tex]

θ₁ = sin⁻¹(0.6)

θ₁ = 36.87°

Similarly, for θ₂,

θ₂ = sin⁻¹(3 × 500 × 10 ⁻⁹ / 10⁻² × 6000)

θ₂ = sin⁻¹(0.9)

θ₂ = 64.16°

Calculate the separation as follows,

θ₂ - θ₁ = 64.16° - 36.87°

θ₂ - θ₁ =  27.29°

Therefore, the angular separation (in degrees) between the second and the third orders on the same side of the central bright fringe if the wavelength is 500 nm and A diffraction grating has 6000 lines per centimeter ruled on it, is  27.29°.

To know more about diffraction:

https://brainly.com/question/12290582

#SPJ2

Answer:

rock go down

Explanation:

what comes up must come down.

Answer: [tex]53\ rev/min[/tex]

Explanation:

Given

angular speed of wheel is [tex]\omega_1 =530\ rev/min[/tex]

Another wheel of 9 times the rotational inertia is coupled with initial wheel

Suppose the initial wheel has moment of inertia as I

Coupled disc has [tex]9I[/tex] as rotational inertia

Conserving angular momentum,

[tex]\Rightarrow I\omega_1=(I+9I)\omega_2\\\\\Rightarrow \omega_2=\dfrac{I}{10I}\times 530\\\\\Rightarrow \omega_2=53\ rev/min[/tex]

Answer:

15.88

is the correct answer

Answer:

a)  fem = - 2.1514 10⁻⁴ V,  b) I = - 64.0 10⁻³ A, c)    P = 1.38  10⁻⁶ W

Explanation:

This exercise is about Faraday's law

         fem = [tex]- \frac{ d \Phi_B}{dt}[/tex]

where the magnetic flux is

        Ф = B x A

the bold are vectors

        A = π r²

we assume that the angle between the magnetic field and the normal to the area is zero

         fem = - B π 2r dr/dt = - 2π B r v

linear and angular velocity are related

        v = w r

        w = 2π f

        v = 2π f r

we substitute

        fem = - 2π B r (2π f r)

        fem = -4π² B f r²

For the magnetic field of Jupiter we use the equatorial field B = 428 10⁻⁶T

we reduce the magnitudes to the SI system

       f = 2 rev / s (2π rad / 1 rev) = 4π Hz

we calculate

       fem = - 4π² 428 10⁻⁶ 4π 0.10²

       fem = - 16π³ 428 10⁻⁶ 0.010

       fem = - 2.1514 10⁻⁴ V

for the current let's use Ohm's law

        V = I R

        I = V / R

         I = -2.1514 10⁻⁴ / 0.00336

         I = - 64.0 10⁻³ A

Electric power is

        P = V I

        P = 2.1514 10⁻⁴ 64.0 10⁻³

        P = 1.38  10⁻⁶ W

Answer:

[tex]P_d=6203.223062W/mm^2[/tex]

Explanation:

From the question we are told that:

Voltage [tex]V=45kV[/tex]

Current [tex]I=50mAmp[/tex]

Diameter  [tex]d=0.50mm[/tex]

Heat transfer factor [tex]\mu= 0.87.[/tex]

Generally the equation for  Power developed is mathematically given by

[tex]P=VI\\\\P=45*10^3*50*10^{-3}[/tex]

[tex]P=2.250[/tex]

Therefore

Power in area

[tex]P_a=1400*0.87[/tex]

[tex]P_a=1218watt[/tex]

Power Density

[tex]P_d=\frac{P_a}{Area}[/tex]

[tex]P_d=\frac{1218}{\pi(0.5^2/4)}[/tex]

[tex]P_d=6203.223062W/mm^2[/tex]

Answer:

[tex]\theta=34 \textdegree[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=55kg[/tex]

Angle [tex]\theta =28.0[/tex]

Coefficient of static friction [tex]\alpha =0.680[/tex]

Generally, the equation for Newtons second Law is mathematically given by

For

[tex]\sum_y=0[/tex]

[tex]N=mgcos \theta[/tex]

for

[tex]\sum_x=0[/tex]

[tex]F_{s}=mgsin\theta[/tex]

Where

[tex]F_{s}=\alpha*N\\\\F_{s}=\alpha*m*gcos \theta[/tex]

[tex]F_{s}=0.68*55*9.8*cos 28[/tex]

[tex]F_{s}=323.62N[/tex]

Therefore

[tex]\alpha mgcos \theta=mg sin \theta[/tex]

[tex]\theta=tan^{-1}(0.68)[/tex]

[tex]\theta=34 \textdegree[/tex]

(a) The static frictional force which holds the box in place is 323.62 N.

(b) The maximum angle that the incline can make with the horizontal is 34.2⁰.

The net force applied to keep the box at rest must be zero in order for the box to remain in equilibrium position. Apply Newton's second law of motion to determine the net force.

∑F = 0

The static frictional force is calculated as follows;

Fs = μFncosθ

Fs = 0.68 x (55 x 9.8) x cos28

Fs = 323.62 N

Fn(sinθ) - μFn(cosθ) = 0

mg(sinθ) - μmg(cosθ) = 0

μmg(cosθ) = mg(sinθ)

μ(cosθ) = (sinθ)

μ = sinθ/cosθ

μ = tanθ

θ = tan⁻¹(μ)

θ = tan⁻¹(0.68)

θ = 34.2⁰

Learn more about net force of inclined here: https://brainly.com/question/25784024

The acceleration of the block over the rough surface is 1.22625 m/s²

The process through which the acceleration is obtained is presented as follows of approach to

The given parameters are;

Mass of block, m = 2 kg

Nature of the surface of the quarter circle = Frictionless

The length of the horizontal, d = 8 m

The coefficient of friction of the horizontal surface, μ = 0.4

The unknown parameter;

The acceleration of the block over the rough surface

Method;

Find the work done by friction to stop the block and divide the result by the mass of the block

The work done by friction, [tex]W_f[/tex] = (Force of friction) × (Distance the block moves on the rough surface before coming to rest)

[tex]\mathbf{W_f}[/tex] = [tex]\mathbf{F_f}[/tex] × d

[tex]F_f[/tex] = Normal reaction of surface on block, [tex]N_r[/tex] × μ

Normal reaction on block, [tex]\mathbf{N_r}[/tex] = Weight of block

[tex]\mathbf{N_r}[/tex] ≈ 2 kg × 9.81 m/s² = 19.62 N

Therefore;

The work done by friction [tex]\mathbf{W_f}[/tex] = [tex]\mathbf{F_f}[/tex] × d = [tex]\mathbf{N_r}[/tex] × μ × d

[tex]\mathbf{W_f}[/tex] = 19.62 N × 0.4 × 8 m = 62.784 J

The work done by the block, W = Force, F × d

Force, F = m × a

Where;

a = The acceleration of the block

According to the principle of conservation of energy, we have;

[tex]\mathbf{W_f}[/tex]  = W

∴ 19.62 J = 2 kg × a × 8 m

a = 19.62/(2 kg × 8 m) = 1.22625 m/s²

The acceleration of the block over the rough surface, a = 1.22625 m/s²

Learn more about work done due and friction here;

https://brainly.com/question/21854305

https://brainly.com/question/1942288

Answer:

test her prototype and collect data about its flight

Answer:

The probability that Susan turns 85 years old is 45,436/97,825= 0.4644.

Explanation:

Edmentum

Answer:

45,436/97,825= 0.4644.

Answer:

p = 60.6N*s

Explanation:

v_f = v_0+a*t

a = (v_f-v_0)/t

a = (1.8m/s)/2.35s

a = 0.77m/s²

F = m*a

F = (25kg+8.5kg)*0.77m/s²

F = 25.8N

^p = F*t

p = 25.8N*2.35s

p = 60.6N*s