this process provides covered entities and business associates with the structural framework upon which ot build their hipaa security plan (T/F)

Early adopters, although not as fast as innovators, are quick to purchase a new product, they are less risk-seeking than innovators; they tend to be opinion leaders of a particular product category. Therefore, the correct options are (a) and (c).

Explanation: Early adopters are those who get products or services at a relatively early point in their product life cycle. As a result, they may be critical to product adoption, making up about 13.5 per cent of the market. Innovators make up just 2.5 per cent of the market. According to research, early adopters have certain characteristics that distinguish them from other types of customers. They have less risk-seeking behaviour than innovators, indicating that they are more careful with their money and, as a result, will wait a little longer to ensure that a new technology is viable before investing in it. Early adopters are also opinion leaders of a particular product category; this means that they are the first to experiment with and test new products, which they then advocate other potential customers. Therefore, the correct options are (a) and (c).

For more such questions on Early adopters

https://brainly.com/question/13839517

#SPJ11

Therefore, the total amount of overhead assigned to the product is $896,300 ($359,500 + $536,800).  

For the Machining Department, the overhead is applied based on estimated machine hours (70,000). The estimated overhead for the Machining Department is $420,000 and the actual machine hours are 64,500. Thus, the amount of overhead assigned to the Machining Department is $359,500 (64,500 x $420,000/70,000).

For the Assembly Department, the overhead is applied based on estimated direct labor hours (60,000). The estimated overhead for the Assembly Department is $540,000 and the actual direct labor hours are 63,200. Thus, the amount of overhead assigned to the Assembly Department is $536,800 (63,200 x $540,000/60,000).

Therefore, the total amount of overhead assigned to the product is $896,300 ($359,500 + $536,800).

When it comes to calculating the amount of overhead assigned to the product, the key is to understand how the overhead is applied in each department. In the Machining Department, overhead is applied based on estimated machine hours, and in the Assembly Department, overhead is applied based on estimated direct labor hours. By taking the estimated overhead for each department, dividing it by the estimated activity, and multiplying the result by the actual activity, the amount of overhead assigned to the product can be calculated.

To know more about estimated overhead refer here :

https://brainly.com/question/30419332

#SPJ11

According to Doctrine and Covenants 101, the saints were forced to leave Jackson County, Missouri, because of persecution and violence from their non-Mormon neighbors. The revelation, which was received by Joseph Smith in 1833, describes how the saints were driven from their homes and lands and forced to flee to neighboring counties.

The specific reasons for the persecution and violence are described in the revelation as follows:

The non-Mormon settlers resented the growing numbers of Mormon immigrants in Jackson County, which they saw as a threat to their political and economic power.

The Mormons were accused of being abolitionists and of seeking to incite slave insurrections, which led to tensions with pro-slavery factions in the area.

The Mormons' religious beliefs and practices were viewed as strange and heretical by their non-Mormon neighbors, which fueled hostility and distrust.

Despite efforts to negotiate with their neighbors and appeal to local authorities for protection, the saints were ultimately forced to leave Jackson County and establish a new settlement in Clay County, Missouri. The events in Jackson County became a defining moment in early Mormon history and contributed to a legacy of persecution and exile that continued throughout the 19th century.

Learn more about missouri here brainly.com/question/14020956

#SPJ4

An advantage of a pure project where self-contained teams work full time on a project is when the following D- Lines of communication are shortened.

It is a type of project organization in which a self-contained team works full-time on the project; team members are regularly removed from their functional departments and work under the direction of a project manager.

Here are the advantages of pure project where self-contained teams work full time on a project:

Shortened Lines of Communication:

Hence, option D, Lines of communication are shortened, is the correct choice.

Learn more about working full times at

https://brainly.com/question/28832508

#SPJ11

For her new mortgage, Jessica wants to pay one point as an upfront fee. Jessica will pay $2,000 for one point.

Paying one point as an upfront fee means paying an amount equal to 1% of the total loan amount to the lender at the time of closing. In exchange for paying this fee, the lender will offer a lower interest rate on the loan, which can result in lower monthly mortgage payments.

Paying points can be a good strategy for borrowers who plan to stay in the home for a long period of time and want to save money on interest over the life of the loan.

To calculate how much Jessica will pay for one point, we need to first determine the value of one point.

One point is equal to 1% of the loan amount.

Therefore, 1 point on a $200,000 loan is:

1% x $200,000 = $2,000

So, Jessica will pay $2,000 for one point.

Learn more about mortgage here:

https://brainly.com/question/29981765

#SPJ11

A logical or realistic accounting period for a business creating financial statements could be one-year, one-month, six-month, or five-year. A one-year accounting period is most common and is recommended for most businesses.

This allows for a full year of financial statements that accurately reflect the business’s financial performance. A one-month accounting period is used by some businesses, such as those that require up-to-date information on a regular basis. A six-month accounting period is typically used by businesses that have seasonal sales, as this allows them to better track their financial performance during their peak seasons.

Finally, a five-year accounting period is used by businesses that have long-term investments or contracts. This allows for a comprehensive view of the business’s financial performance over the long term.

Know more about Investments here:-

https://brainly.com/question/15353704#

#SPJ11

The given statement "Michael owns 100 shares of stock in the Samson Electricals Corporation, but as a stockholder, he does not have the right to vote in stockholders' meetings. Michael owns common stock. " is true because Michael does not have the right to vote in stockholders' meetings even though he owns shares, this is an example of a case where Michael owns common stock instead of preferred stock.

Common stock refers to a stock that represents the basic ownership of a corporation. The common stockholders have the right to vote on issues that affect the company's direction and are entitled to receive dividends. The right to vote in stockholders' meetings is not applicable to preferred stockholders. As a result, common stockholders have the most control over the company. Therefore, the statement is true.

You can learn more about common stock at

https://brainly.com/question/25765493

#SPJ11

The correct answer is B) You must first de-register the drone in the foreign country and then register it in the U.S. According to the Federal Aviation Administration, any drone purchased in a foreign country must be de-registered from the foreign country and registered in the U.S. within 14 days of returning home. This is to ensure that the drone is compliant with the aviation laws and regulations in the U.S.

A drone is an unmanned aerial vehicle (UAV), also known as an unmanned aerial system (UAS), a remotely piloted aircraft system (RPAS), or a drone for short. It is a type of aircraft that does not have a human pilot aboard, instead using a remote control to fly or navigate. A drone's use varies for commercial, scientific, military, and recreational purposes.

For more info about the topic Drones registration check the below link:

https://brainly.com/question/15789398

#SPJ11

In the following question, among the given options on terminology, Coupon rate: "The rate of...the bond, " Required rate of return- "The bondholder's...bond at this rate." Maturity- "The period of time.....coupon payments." Indenture- "The legal document...and the purchaser."

The definitions provided match the following terms or bond features:

For more such questions on terminology

https://brainly.com/question/25965295

#SPJ11

Decreasing revenue is the term for the following statement business do not maximize output from the given inputs​.

If firms cannot maximize output from given inputs, they are unable to maximize returns from given inputs and thus returns decrease.

Therefore, the term decreasing revenue is the term used when a firm fails to maximize its output from given inputs.

Firms that do not maximize output from given inputs are likely to be inefficient and have economies of scale, which occur when output increases proportionally more than the input invested. Economies of scale are the opposite.

This situation arises from an economic law called the law of diminishing returns. According to this law of economics, there is a point in the production process at which additional units of input do not yield a proportional return. d Output increases proportionally to input.

To learn more about business, here:

https://brainly.com/question/15826771

#SPJ4

A single-business diversification strategy and a dominant-business diversification strategy are both examples of a low level of diversification. Alternative b is correct.

Low-level diversification refers to a strategy in which a company operates within a single industry or market, and generates most of its revenue from a single product or service line.

A single-business diversification strategy involves expanding into related products or services within the same industry, while a dominant-business diversification strategy involves expanding into products or services that are related to the core business, but still represent a small proportion of overall revenue.

In conclusion, alternative b. low level is correct.

See more about diversification at https://brainly.com/question/18647091.

#SPJ11

Carol should begin her master budget for "The Big Spoon" by creating an operational budget. An operational budget will help Carol organize the company's expenses and anticipate the necessary funding for upcoming operations. It also helps provide a financial forecast to ensure the company meets its financial goals.

An operational budget should include an estimate of fixed and variable costs, such as personnel costs, rent, taxes, and other expenses. Carol should also account for any changes that may occur in the market, such as increases in the price of raw materials, changes in demand, or new taxes. This will ensure that the budget she creates is flexible and adaptable.

Additionally, Carol should consider the company's current financial situation. This will help her identify any potential financial risks and take the necessary steps to mitigate them. She should also create a timeline of milestones that she will need to achieve in order to complete the budget. This will help her stay organized and on track.

Overall, creating an operational budget is a good starting point for Carol's master budget for "The Big Spoon." By carefully analyzing the company's expenses and considering changes in the market, she can create a budget that is both accurate and flexible. Additionally, creating a timeline of milestones will help her stay organized and on track.

To learn more about expenses here:

https://brainly.com/question/14697297#

#SPJ11

The total energy required to bring the water to a boil is thus 1876 kJ.

The energy dissipated in the battery is calculated using the formula P = IV, where P is the power, I is the current, and V is the voltage. Since the current is known to be 10.5 A and the voltage is 10.0 V, the power dissipated in the battery is Pbat = 105 W.

This power is the rate at which energy is dissipated by the battery. To calculate the total energy dissipated by the battery, we can multiply the power by the time taken for the water to boil. Since it takes 16.8 minutes for the water to boil, the total energy dissipated by the battery is Ebat = Pbat × t = 105 W × 16.8 min = 1776 kJ.

This energy must be added to the energy required to boil the cup of water, which is 100 kJ. The total energy required to bring the water to a boil is thus 100 kJ + 1776 kJ = 1876 kJ.

In reality, the energy dissipated by the battery is not enough to boil the cup of water, since heat is lost to the environment over time. To compensate for these losses, the energy dissipated by the battery must be increased. This means that the device may not be suitable for boiling water, but may be suitable for warming beverages or keeping them hot.

For more about energy dissipated:

https://brainly.com/question/15331125

#SPJ11

From of income statement it can be concluded that, case a) Income Before Tax (Loss): $300, case b) Income Before Tax (Loss): $100, case c) and e) Income Before Tax (Loss): $0, and case d) Before Income Tax (Loss): $450.

An income statement shows a company's revenues and expenses, subtracting the latter from the former gives the profit for the period 

For the income statement for each of the following independent cases:
Case A:
Sales Revenue: $650
Beginning Inventory: $100
Purchases: $700
Total Available: $500
Ending Inventory: $200
Cost of Goods Sold: $300
Gross Profit: $350
Expenses: $50
Pretax Income (Loss): $300

Case B:
Sales Revenue: $1,100
Beginning Inventory: $200
Purchases: $900
Total Available: $1,100
Ending Inventory: $150
Cost of Goods Sold: $950
Gross Profit: $150
Expenses: $50
Pretax Income (Loss): $100

Case C:
Sales Revenue: $150
Beginning Inventory: $300
Purchases: $200
Total Available: $400
Ending Inventory: $100
Cost of Goods Sold: $300
Gross Profit: $50
Expenses: $50
Pretax Income (Loss): $0

Case D:
Sales Revenue: $800
Beginning Inventory: $550
Purchases: $300
Total Available: $500
Ending Inventory: $200
Cost of Goods Sold: $300
Gross Profit: $500
Expenses: $50
Pretax Income (Loss): $450

Case E:
Sales Revenue: $1,000
Beginning Inventory: $900
Purchases: $1,100
Total Available: $1,000
Ending Inventory: $50
Cost of Goods Sold: $950
Gross Profit: $50
Expenses: $50
Pretax Income (Loss): $0

Learn more about income statement: brainly.com/question/15169974

#SPJ11

The maximum price that A-to-Z paper is willing to pay for one Tradable Pollution Permit is $10.

A Tradable Pollution Permit (TPP) is a type of legal permission given to a firm, allowing them to emit a certain amount of emissions. Tradable pollution permits are authorizations that are granted to companies by the government that allow them to discharge pollutants into the environment up to a certain limit. The quantity of the permit represents a specific amount of emissions, and the permit holder has the freedom to use it or sell it to another firm.

A government agency or regulatory body is responsible for setting the quantity of these permits that are issued for a given period to limit pollution levels while still ensuring the economy's growth. The advantages of using Tradable Pollution Permits include greater flexibility, allowing businesses to make adjustments, and providing financial incentives for companies to reduce their pollution levels.

The Marginal Cost of Pollution Reduction (MCPR) is the expense associated with reducing emissions by one unit. It is the price a company must pay to decrease its pollution levels by one unit. The MCPR for a given firm is determined by the production process, market prices, and other variables.

The maximum amount that A-to-Z paper would pay for one of the permits is determined by calculating the marginal cost of pollution reduction of the company:

Marginal Cost of Pollution Reduction = Total Cost of Pollution Reduction ÷ Change in Pollution

Marginal Cost of Pollution Reduction of A-to-Z Paper = $1000 ÷ 100 tons = $10/ton

Therefore, A-to-Z paper is willing to pay up to $10 for one of the permits.

Learn more about Tradable Pollution Permit:

https://brainly.com/question/30136574

#SPJ11

To create a map showing both the points and the polygons with a backdrop of the major transportation arteries in Austin, the Austin folder containing two shapefiles needs to be fixed. The problem for each of the shapefiles should be described; then fixed. Here are the steps to create the map:

Step 1: Open ArcMap and load arteries first, in order to be able to compare the other datasets against it.

Step 2: Load the shapefile that shows dog off-leash areas as points. However, both have coordination problems.

Step 3: For the points shapefile, go to the Geoprocessing menu and then go to the data management tools.

Step 4: Select the Project tool under data management tools and set the input and output coordinates in the appropriate coordinate system for Austin. For instance, NAD_1983_UTM_Zone_14N.

Step 5: After you have done that, click OK and wait for the shapefile to be projected.

Step 6: After the projection, drag the projected shapefile into the new map.

Step 7: Next, load the shapefile that shows dog off-leash areas as polygons.

Step 8: For the polygons shapefile, go to the Geoprocessing menu and then go to the data management tools.

Step 9: Select the Project tool under data management tools and set the input and output coordinates in the appropriate coordinate system for Austin. For instance, NAD_1983_UTM_Zone_14N.

Step 10: After you have done that, click OK and wait for the shapefile to be projected.

Step 11: After the projection, drag the projected shapefile into the new map.

Step 12: Adjust the appearance and symbology of the shapefiles.

Step 13: Lastly, add the base map of Austin's major transportation arteries as a backdrop for the new map.

Step 14: Save and export the new map as an image file.

learn more about the steps to create a map here:

https://brainly.com/question/21304294

#SPJ11

Most global firms find it is better to have expatriates rather than local staff at the management positions of their foreign operations is False.

Most global firms find it better to have locals rather than expatriates in the management positions of their foreign operations. According to them, local staff is more acquainted with the culture and norms of the nation and would have a better understanding of local consumers. Since they are already familiar with the place, they may provide the company with a unique perspective and an edge over the competition.

Expatriates, on the other hand, will require considerable training and development to understand the local context and culture. They may not be aware of the cultural and societal implications of their actions and may make poor judgments as a result.

Learn more about the "Global firms" ; https://brainly.com/question/14005895

#SPJ11

1. The Efficient Market Hypothesis (EMH) is a theory that suggests that all available information is reflected in the current market price of an asset or security.

This means that it is impossible to consistently generate large profits by trading on this information. Therefore, a successful firm like Microsoft generating large profits for years does not violate the EMH.2. The three limits to arbitrage discussed in class include:1. Fundamental risk - This refers to the risk that a security's value may deviate from its fundamental value for an extended period of time.

This can occur due to a variety of factors such as investor psychology, changes in market conditions, or changes in the broader economy.

Learn more about Microsoft here:https://brainly.com/question/1423849

#SPJ11

the Amherst Machine's corporation tax amount is $115,750.

The income tax for Amherst Machine, a tool manufacturer, is calculated below:

Income: $1,900,000

Taxable income = Income - Deduction = $1,900,000 - $625,000 = $1,275,000

Income Tax = Base tax + Rate of excess over

Amount range for base tax

Base Tax = $22,250

Rate = 0.34

Excess over Amount range for base tax = ($1,275,000 - $1,000,000) = $275,000

Income Tax = $22,250 + (0.34 × $275,000) = $22,250 + $93,500

Income Tax = $115,750

Therefore, the Amherst Machine's corporation tax amount is $115,750.

Learn more about Corporate tax at

https://brainly.com/question/30092524

#SPJ11

When a buyer conducts research that examines whether making a cake from scratch versus ordering it frozen and pre-sliced, they are conducting a make or buy analysis.

Making the decision to manufacture a product internally versus buying it from a third party provider is known as a make-or-buy decision. 

A make-or-buy decision, also known as an outsourcing decision, contrasts the costs and benefits of creating a required good or service in-house with those of using an outside supplier for the relevant resources. 

A corporation should take into account all costs associated with the procurement and storage of the goods in comparison to producing the goods internally, which can include the buying of fresh equipment, in order to evaluate costs accurately.

Learn more about make or buy analysis here:

brainly.com/question/15304126

#SPJ11

Industrializing societies typically undergo a process of urbanization, in which large portions of the population move from less populated areas to cities in search of work.

Urbanization is the process of increasing the number of people who live in urban areas. Urbanization refers to the process by which towns and cities expand in terms of population and land usage when compared to the surrounding rural areas.

It is a process in which an increasing number of people live in urban regions due to industrialization or modernization. It is a population migration from rural areas to urban areas that typically occurs in industrializing societies.

The factors that contribute to urbanization include:

Learn more about urbanization at

https://brainly.com/question/16966131

#SPJ11

When the project manager changes an activity on the critical path to start at a later date, then the whole project will end at a later date. This statement is true.

A critical path is defined as the series of connected activities that determine the project’s completion date. The critical path is the longest duration path through the network, and it determines the shortest time to complete the project. It is essential to understand the critical path to complete the project on time.A delay in the critical path will cause the project completion date to slip. The critical path will be changed if there is a delay in any activity, causing the whole project to end at a later date. The critical path will change to the new series of connected activities, which will determine the new project completion date.The critical path method (CPM) is used to manage the project schedule. It is a planning tool used to calculate the project's duration and its critical path. The CPM is used to calculate the project duration and the expected completion date. The CPM is essential for project management and control.The critical path method is a useful tool for managing and controlling project schedules. The CPM is used to determine the duration of the project, the critical path, and the expected completion date. A delay in the critical path can cause the project to end at a later date, and a change in the critical path will determine the new project completion date.

for more questions on project manager

https://brainly.com/question/15610382

#SPJ11

As Amanda's attorney, the first thing you must do to begin your lawsuit against Musclematic is to file a complaint.

What is a lawsuit? A lawsuit is a case or a dispute that is resolved through legal proceedings. A lawsuit is a formal legal action taken against another party. It begins when one party (the plaintiff) files a complaint against the other party (the defendant).

What is a complaint? A complaint is a written document that outlines the plaintiff's claims against the defendant. The complaint includes details about the plaintiff's case, such as the injuries or damages suffered, and the legal basis for the claim. The complaint also requests a specific form of relief, such as monetary damages or an injunction against the defendant. Once the complaint is filed, the defendant has a certain amount of time to respond to the allegations made against them.

In this case, Amanda's attorney must file a complaint against Musclematic to begin the lawsuit.

To learn more about “ lawsuit” refer to the https://brainly.com/question/24910850

#SPJ11

If there is a rise in the price of oil, the GDP deflator will increase as the prices of goods and services increase and the purchasing power of a given money amount decreases. This will result in an increase in the nominal GDP, but a decrease in real GDP as the increase in prices will outweigh the increase in output. As a result, the real GDP will decrease.

The effect of a rise in oil prices on the GDP deflator and the real GDP. The GDP deflator is used to calculate the inflation rate by comparing real GDP and nominal GDP.

Real GDP is a measure of the economy's actual output in terms of purchasing power, whereas nominal GDP is a measure of the economy's output at current prices. Oil is a critical element in any economy because it is used in nearly every aspect of production.

The GDP deflator will rise as the price of oil increases. It is because the rise in oil prices causes a rise in the cost of production, which results in a rise in the price level.

A rise in the price level results in an increase in nominal GDP. Real GDP, on the other hand, does not shift since it represents the actual output produced by an economy, not the price level.

A rise in the price of oil causes a decline in real GDP if it is significant enough to disrupt production. Higher oil prices will raise the cost of production, lowering the level of aggregate supply in the short run. As a result, real GDP declines.

Learn more about GDP here:

brainly.com/question/1383956

#SPJ11

The following is the journal entry to recognize the income tax benefit of the net operating loss of Baginski Steel Corporation for the year 2024: Journal Entries Account Title Debit Credit Income tax benefit (Deferred Tax Asset) $105,000Income tax expense (Income Statement) $105,000($420,000 * 25%)

The net operating loss for Baginski Steel Corporation in the year 2024 is $420,000. For the purpose of taxation, the government will allow a tax deduction based on the net operating loss carryforward in future years.

It means that the corporation can deduct future taxable income arising from net operating loss carry forward.

For this reason, a deferred tax asset is recognized by the corporation in the current year 2024 for the estimated amount of tax benefit that can be realized from net operating loss carried forward.

Deferred Tax Asset = Net operating loss * Enacted tax rate

Deferred Tax Asset = $420,000 * 25% = $105,000

The deferred tax asset is recognized in the balance sheet under the heading of Current Asset as it is expected to be realized in the next year.

The tax benefit is also recognized in the income statement of 2024 under the heading of Income Tax Expense as it reduces the taxable income of the corporation.

The lower portion of the income statement that reports the income tax benefit of the net operating loss is shown below: Income Statement Particulars Amounts Net income$(420,000)

Add: Income tax expense105,000Net loss$(315,000)

Learn more about Income Statements here:

https://brainly.com/question/15169974

#SPJ11

Process costing is a method that is utilized by companies to determine the manufacturing costs of the products.

The following are the steps to be followed to assign costs to units of product using process costing. Identify the total costs to be accounted for. Record the physical flow of resources. Compute the equivalent units of production. Assign costs to batches of work. Compute the costs per equivalent unit. Here is an explanation of the above steps in detail:1. Identify the total costs to be accounted for. The first step in the process costing method is to identify the total cost to be accounted for. This involves the identification of all the costs incurred during the production process. The costs may include direct materials, direct labor, and manufacturing overhead.2. Record the physical flow of resources. The second step is to record the physical flow of resources. This involves tracking the movement of materials and labor throughout the production process. The records should show when materials were received, when they were used, and when they were completed.3. Compute the equivalent units of production. The third step is to compute the equivalent units of production. This involves determining the number of units produced and the degree of completion of the production process.4. Assign costs to batches of work. The fourth step is to assign costs to batches of work. This involves allocating the total costs of production to the different batches of products.5. Compute the costs per equivalent unit. The final step is to compute the costs per equivalent unit. This involves dividing the total cost of production by the total number of equivalent units produced. This gives the cost per unit of production.

For more questions on manufacturing costs

https://brainly.com/question/2320723

#SPJ11

If the initial margin is 60%, your initial investment was $20,000.

To calculate the initial investment for selling short 200 shares of common stock at $60 per share with an initial margin of 60%, we can use the following formula:

Initial Investment = Number of Shares x Initial Price / Initial Margin

Substituting the values, we get:

Initial Investment = 200 x $60 / 0.6

Initial Investment = $20,000

Since the initial investment for short selling is the amount that needs to be deposited with the broker, the initial investment in this case was $20,000. Therefore, the correct answer is $20,000.

Learn more about common stock here:

https://brainly.com/question/29634344

#SPJ11

In the context of cash flow analysis, Return on investment (ROI) is a useful measure as a means to evaluate performance when there is a separation between managers and owners.

ROI (Return on investment) is a financial metric that assesses the efficiency of an investment or compares the efficiency of several investments.

ROI can be used to compare the costs and benefits of any investment, including money, time, and resources.

ROI is a financial performance measure that calculates the percentage return on an investment relative to its cost. ROI takes into account both the gain from an investment and the cost of the investment.

It is a popular metric for evaluating performance in the context of cash flow analysis when there is a separation between managers and owners.

The formula for calculating ROI is simple:

ROI = Net Profit / Cost of Investment

This indicates that ROI is equal to the net profit of an investment divided by the cost of the investment. This ratio is normally expressed as a percentage or a ratio.

Learn more about Return on investment here:

https://brainly.com/question/11913993

#SPJ11

A series of questions that attempt to deconstruct a business issue by moving from general to specific are known as solution-oriented questions.

What are solution-oriented questions? Solution-oriented questions is a method for examining issues and generating alternatives. It's a process of asking questions that are meant to identify potential solutions or improvements to a current issue. Solution-oriented questioning leads to answers that can lead to the development of an action plan that addresses the issue.

These types of questions concentrate on current and future results, with the goal of developing solutions rather than dwelling on problems. Solution-oriented questioning emphasizes collaboration, positive thinking, and the use of strengths to achieve goals.

Read more about a business issue here:https://brainly.com/question/30091710

#SPJ11

The employees who turn cloth into products that can be sold as apparel represent the core operation. (option a)

Henry Mintzberg, a prominent management theorist, proposed that there are seven basic organizational parts in a typical organization. These parts are:

Learn more about organizational parts here:

https://brainly.com/question/15586509

#SPJ11