Answer:
Hydraulic gradient=0.0173
Explanation:
Joe, a technician, is attempting to connect two hubs to add a new segment to his local network. He uses one of his CAT5 patch cables to connect them; however, he is unable to reach the new network segment from his workstation. He can only connect to it from a workstation within that segment. Which of the following is MOST likely the problem?
A. One of the hubs is defective.
B. The new hub is powered down.
C. The patch cable needs to be a CAT6 patch cable.
D. The technician used a straight-through cable.
Answer:
Option D. is correct
Explanation:
Joe uses one of his CAT5 patch cables to connect two hubs to add a new segment to his local network. As he can only connect to it from a workstation within that segment, he is not able to reach the new network segment from his workstation.
The most problem is that the technician used a straight-through cable.
Option D. is correct.
Which option identifies the type of engineer described in the following scenario?
Sean is an engineer whose current project is a skyscraper in Richmond, VA. He relies heavily on geometry in his research of building design.
Material
Civil
Mechanical
Chemical
Answer:
civil
Explanation:
mark be branilist
Answer:
Civil
Explanation:
civil engineering – the application of planning, designing, constructing, maintaining, and operating infrastructure while protecting the public and environmental health, as well as improving existing infrastructure that may
Consider the following statement concerned with the collection of data, and determine the best selection of terms to complete the statement: "The entire group of objects or peopleabout which information is wanted is called the __________ . Individual members are called _____________. The _________is the part that is actually examined in order to gather information.
a. population, units, sample
b. sample, units, target population
c. response group, respondents, nonresponse group
d. population, dependend variables, subgroup
Answer:
a. population, units, sample
Explanation:
In a survey or in a research, population is defined as the total number of people or total number of items in the group that we want to study in a research. It is the entire pool from where a sample is drawn.
An unit is defined as the individual members for which the information or data is collected.
A sample is defined is defined as the group or part of the selection from where the information or data is to be obtained.
The overall group of people should be known as the population.
The individual members should be units
And, the sample represents the part that should be examined.
What are population, units, and the sample?The population refers to the total no of people or items that are required to be studied for the research purpose. In this, the sample should be drawn. The unit refers to the individual members due to which the data should be collected. And, the sample means the portion of the selection from where the data should be collected.
Therefore, the option a is correct.
learn more about population here: https://brainly.com/question/19203964
name as much parts in a car that you know
Answer:
engine suspension brake and more
Explanation:
A sample of soil has a volume of 0.45 ft^3 and a weight of 53.3 lb. After being dried inan oven, it has a weight of 45.1 lb. It has a specific gravity of solids of 2.70. Compute its moisture content and degree of saturation before it was placed in the oven.
Answer:
a) the moisture content before it was placed in the oven is 18.18%
b) degree of saturation for soil is 72.19%
Explanation:
Given the data in the question;
Moisture Content = [(Weight of soil before dry - dry weight) / dry weight] × 100
so we substitute
Moisture content = [(53.3 - 45.1) / 45.1 ] × 100
= (8.2/45.1) × 100
= 18.18%
Therefore the moisture content before it was placed in the oven is 18.18%
Dry Unit Weight = dry weight / volume
Dry Unit Weight = 45.1 lb / 0.45 ft³
Dry Unit Weight = 100.22 lb/ft³
we know that;
dry unit weight = (Specific gravity × unit weight of water) / (1 + e)
we also know that; unit weight of water is 62.43 lbf/ft³
so we substitute
e = (2.70×62.43 / 100.22) - 1
e = 1.68 - 1
e = 0.68
so void ratio e = 0.68
Now we determine the degree of saturation using the equation;
degree of saturation = (Moisture content × specific gravity) / void ratio
we substitute
degree of saturation = ( 18.18% × 2.7) / 0.68
= 0.49086 / 0.68
= 0.7219 ≈ 72.19%
Therefore degree of saturation for soil is 72.19%
If Nick's average stride length is 2.7 feet, how many strides will it take him to walk to school?
Answer: how far is the school?
Explanation:
In the United States, a bicyclist is killed:
A. (Every 12 hours
B. Every week
c. Every day
D. Every 6 hours
In the United States, it should be noted that a bicyclist is killed every six hours.
The cause of the accidents has been attributed to the rough driving of vehicle drivers and some faults are on the part of the cyclist as well.
Rapidly overtaking a bicycle is dangerous. Also, there are some vehicle drivers who drive into the lanes that are meant for cyclists. This isn't appropriate.
Drivers should ensure that they are not close to the cyclists when driving as there should be a space of at least 3 feet between the bicycle and the vehicle.
Furthermore, when there is a narrow traffic lane, the vehicle drivers should ensure that there's a clear traffic in the opposite lane before they change their lanes.
Lastly, both the cyclists and the vehicle drivers should not overspeed and drive safely.
Based in the information given above, the correct option is D.
Read related link on:
https://brainly.com/question/20937766
Examine the pressure-measuring device shown in the figure below. (a) What is the gauge pressure reading in psi at point A? (b) What is the pressure difference between point A and B? (c) Which is higher, pressure at point A or at point B? (d) What is the absolute pressure in psi at point D? State any assumptions you made
Answer: 45
Explanation:just cuase I need to
Consider the following statement, which is intended to create an ArrayList named a to store only elements of type Thing. Assume that the Thing class has been properly defined and includes a no-parameter constructor.
ArrayList a = /* missing code */;
Which of the following can be used to replace /* missing code */ so that the statement works as intended?
A: new Thing()
B: new ArrayList()
C: new ArrayList(Thing)
D: new ArrayList()
E: new ArrayList<>(Thing)
Answer:
new ArrayList<Thing>()
Explanation:
The syntax to declare an arrayList is:
ArrayList [var-name] = new ArrayList<data-type>()
From the question;
We understand that the variable name is: a
And the data-type is: Thing
So, the ArrayList of type Thing can be defined using:
ArrayList a = new ArrayList<Thing>();
Hence:
None of the options answers the question.
Earth completes one full ____ on its axis every 24 hours
Answer:
rotation
Explanation:
I just answered this!
Technician a says that diesel engines can produce more power because air in fuel or not mix during the intake stroke. Technician be says that diesel engines produce more power because they use excess air to burn feel who is correct
Answer:
Technician be says that diesel engines produce more power because they use excess air to burn feel who is correct
Explanation:
He is correct as many engines are run by diesel. It produces more power as that is how cars produce more power.
A window‐mounted air‐conditioning unit (AC) removes energy by heat transfer from a room, and rejects energy by heat transfer to the outside air. At steady‐state, the AC cycle requires 0.434kW and has a coefficient of performance (COP) of 6.22. Determine the rate at which the energy is removed from the room air, in kW. If electricity is valued at $0.10/kw-hr, determine the cost of operating the unit for 24hrs.
Solution :
Given :
The power of the air‐conditioning (AC) unit is , W = 0.434 kW
The coefficient of performance or the COP of the air‐conditioning (AC) unit is given by = 6.22
Therefore he heat removed is given by , [tex]$Q_H = 6.22 \times 0.434$[/tex]
[tex]$Q_H = 2.7 \ kW $[/tex]
Now if the electricity is valued at 0.10 dollar per kW hour, then the operating cost of the air conditioning unit in 24 hours is given by = 0.10 x 2.7 x 24
= 6.48
Therefore the operating cost = $ 6.48 for 24 hours.
