Answer:
I hope it's helpful
Explanation:
2 mol of Al2O3 = 4 mol of Al
13 mol of Al2O3 =? (13/2)*4 = 26 mol
Of the 4 compounds above, v has the smallest HOMO-LUMO energy gap and therefore would absorb the wavelength of light.
It is difficult to answer this question without more information about the 4 compounds mentioned. However, based on the statement given, if a compound has a smaller HOMO-LUMO energy gap, it means that it requires less energy to excite an electron from the HOMO to the LUMO orbital.
As a result, such a compound would absorb light of a longer wavelength compared to compounds with larger HOMO-LUMO energy gaps, which require more energy to promote an electron.
Therefore, if compound "v" has the smallest HOMO-LUMO energy gap among the 4 compounds mentioned, it is likely that it would absorb light of a longer wavelength compared to the other compounds.
For more questions like wavelength visit the link below:
https://brainly.com/question/29448414
#SPJ11
In the pictured cell, the side containing zinc is the_________ and the side containing copper is the __________. The purpose of the Na2SO4 is to _________
In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.
A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.
A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.
Learn more about anode at:
https://brainly.com/question/17109743
#SPJ11
what substrate concentration is typically utilized in enzymatic analyses to ensure zero-order kinetics?
A substrate concentration of 10-100 mM is sufficient to achieve zero-order kinetics.
The substrate concentration utilized in enzymatic analyses to ensure zero-order kinetics is a high substrate concentration.
A high substrate concentration is typically utilized in enzymatic analyses to ensure zero-order kinetics.
Zero-order kinetics refers to the reaction rate's independence on the substrate concentration's magnitude when the substrate concentration is significantly greater than the enzyme concentration in the reaction.
Kinetic behavior is when the reaction rate is constant and not dependent on substrate concentration.
Thus, a substrate concentration that is 10- to 20-fold higher than the enzyme concentration, that is around 10-100 mM is used to achieve zero-order kinetics.
Learn more about substrate concentration here:
brainly.com/question/29238037
#SPJ11
PLEASE HELP ME ASAP
The orbital diagram suggest Pauli's exclusion principle.
option C.
What is Pauli's exclusion principle?Pauli's Exclusion Principle is a fundamental principle of quantum mechanics that states that no two identical fermions (particles with half-integer spin, such as electrons, protons, and neutrons) can occupy the same quantum state simultaneously.
In other words, if one fermion is in a particular quantum state, then no other fermion can be in that same quantum state at the same time.
This principle is crucial in understanding the behavior of matter at the atomic and subatomic level. It explains, for example, why electrons in an atom occupy different energy levels and why atoms and molecules have unique chemical and physical properties.
The diagram suggest that the spin is different, so it describes Pauli's exclusion principle.
Learn more about Pauli's exclusion principle here: https://brainly.com/question/16950638
#SPJ1
If some solid sodium solid hydroxide is added to a solution that is 0.010–molar in (CH3)3CCl and 0.10–molar in NaOH, which of the following is true? (Assume the temperature and volume remain constant.)answer choicesa. Both the reaction rate and k increase.b. Both the reaction rate and k decrease.c. Both the reaction rate and k remain the same.d. The reaction rate increases but k remains the same.e. The reaction rate decreases but k remains the same.
If some solid sodium hydroxide is added to a solution that is 0.010–molar in (CH₃)₃CCl and 0.10–molar in NaOH, the reaction rate increases but k remains the same. Therefore, option D is correct.
In this scenario, when solid sodium hydroxide (NaOH) is added to a solution containing (CH₃)₃CCl and NaOH, a reaction between (CH₃)₃CCl and NaOH takes place. The balanced chemical equation for this reaction is:
(CH₃)₃CCl + NaOH ⇒ (CH₃)₃COH + NaCl
The reaction rate is determined by the concentration of the reactants. In this case, the concentration of (CH₃)₃CCl remains constant because only solid NaOH is added.
The rate constant depends on the specific reaction and the conditions under which it occurs. Since the temperature and volume remain constant, the rate constant (k) will also remain constant.
To learn more about NaOH, follow the link:
https://brainly.com/question/20573731
#SPJ12
please answer that,
Each of the functions in column A will be performed by their respective hormones. Each of the hormones in the human body has a different function.
What is a hormone?A hormone is a chemical substance that is produced by a gland or a group of cells and is transported by the bloodstream to target cells or organs in the body. They are produced by endocrine glands.
To answer your question:
1. Needed by the body tor water reabsorption - Parathormone2. Needed by the body to increase blood calcium level - Calcitonin3 . Needed by the body to increase one's height - Somatotropin4. Needed by the body to combat insomnia - Endorphin5 . Needed by the body to shield the body from UV rays - Melanocyte SH6 . Needed by the body for proper metabolism - Thyroxine7 . Needed by the body to reduce physical pain or injury - Endorphin8 . Needed by the body to reduce symptoms of stress - Melatonin9 . Needed by the body to develop boy's sex characteristics - Androgen1 0 . Needed by the body to lower blood sugar level - Glucagon
To know more about hormones, visit:
https://brainly.com/question/24383458
#SPJ1
What would the potential of a standard hydrogen (S.H.E.) electrode be if it was under the following conditions?
[H+] = 0.77 M
PH2 = 1.4 atm
T = 298 K
The potential of a standard hydrogen (S.H.E.) electrode under the given conditions is -0.126V.
A standard hydrogen electrode (SHE) is a reference electrode used to estimate the standard electrode potentials (E°) of half-reactions. It is made up of a platinum electrode coated in platinum black (Pt) and a hydrogen (H2) electrode dipping into an acidic solution of HCl. The pressure of H2 is measured at 1.0 atm, and the concentration of H+ is maintained at 1.0 mol/L. The potential of the SHE is set to 0.000 V at all temperatures, and other electrode potentials are compared to it to determine their standard reduction potentials.
Using the Nernst equation, we can compute the potential of the SHE : E = E° - (RT/nF)lnQ, where E is the cell potential, E° is the standard cell potential, R is the gas constant, T is the temperature, n is the number of moles of electrons transferred in the redox reaction, F is the Faraday constant, and Q is the reaction quotient.
The given conditions[H+] = 0.77 MPH2 = 1.4 atm T = 298 K
We can use the Nernst equation to calculate the potential of the SHE under these conditions as follows:
E = E° - (RT/nF)lnQ,
where E° = 0.000 VR = 8.314 J/(mol*K)n = 2 F = 96,485 J/V*KpH2 = 1.4 atm
Q = [H+]2/[H2]E = E° - (RT/nF)lnQ= 0.000 - (8.314*298/2*96,485)*ln (0.77/1.4^2)= 0.000 - 0.000688= -0.126 V
Therefore, the potential of the standard hydrogen electrode (SHE) under the given conditions would be -0.126 V.
To know more about standard hydrogen (S.H.E.) electrode please visit :
https://brainly.com/question/12588341
#SPJ11
Which subatomic particles have a positive and negative electrical charge?
Electrons have a negative electrical charge, whereas protons have a positive charge.
Subatomic particles like electrons and protons are essential in defining how atoms and molecules behave. Electrons are negatively charged particles that move in shells or energy levels around an atom's nucleus. The positive charge of protons and the negative charge of electrons are identical in magnitude but diametrically opposed in sign. Together with neutral neutrons, protons are positively charged particles that make up an atom's nucleus. An atom's proton count establishes the element it belongs to. Atoms' chemical activity, particularly their capacity to form chemical bonds and reactions, is greatly influenced by the charges of their protons and electrons.
learn more about Subatomic particles here:
https://brainly.com/question/29765133
#SPJ4
Given the kinetics data for each enzyme in the presence and absence of its inhibitor, determine the type of inhibition. Enzyme carbonic anhydrase + inhibitor A chymotrypsin + inhibitor B penicillinase + inhibitor C lysozyme + inhibitor D carboxypeptisase A + inhibitor E KM (MM) 8,000 12,000 5,000 5,000 50 30 6 15 3 Vmax (mmol/s) 600,000 600,000 100 75 2,000 1,500 0.5 0.5 1,000 800 Competitive Noncompetitive Uncompetitive
The type of inhibition for each enzyme in the presence of its inhibitor is as follows:
carbonic anhydrase + inhibitor A: competitive inhibition chymotrypsin + inhibitor B: noncompetitive inhibition penicillinase + inhibitor C: noncompetitive inhibition lysozyme + inhibitor D: noncompetitive inhibition carboxypeptidase A + inhibitor E: noncompetitive inhibitionWhat is enzyme inhibition?
Inhibitors that do not contribute to the development of the product carry out the inhibition. The inhibitors can impact both the substrate and the enzyme. The stoppage of enzyme activity is referred to as enzyme inhibition.
To determine the type of inhibition for each enzyme in the presence of its inhibitor, we can compare the kinetics data for the enzyme alone and in the presence of the inhibitor. Specifically, we can compare the changes in KM and Vmax values.
For carbonic anhydrase + inhibitor A: In the presence of inhibitor A, KM increases and Vmax remains constant. This indicates that inhibitor A is a competitive inhibitor. For chymotrypsin + inhibitor B: In the presence of inhibitor B, both KM and Vmax decrease. This indicates that inhibitor B is a noncompetitive inhibitor. For penicillinase + inhibitor C: In the presence of inhibitor C, both KM and Vmax decrease. This indicates that inhibitor C is a noncompetitive inhibitor. For lysozyme + inhibitor D: In the presence of inhibitor D, KM decreases and Vmax remains constant. This indicates that inhibitor D is an noncompetitive inhibitor. For carboxypeptidase A + inhibitor E: In the presence of inhibitor E, KM increases and Vmax decreases. This indicates that inhibitor E is a mixed inhibitor, which can be further classified as noncompetitive since KM decreases more than Vmax decreases.Therefore, the type of inhibition for each enzyme in the presence of its inhibitor is as follows:
carbonic anhydrase + inhibitor A: competitive inhibition chymotrypsin + inhibitor B: noncompetitive inhibition penicillinase + inhibitor C: noncompetitive inhibition lysozyme + inhibitor D: uncompetitive inhibition carboxypeptidase A + inhibitor E: noncompetitive inhibitionLearn more about enzyme inhibition on:
https://brainly.com/question/14944549
#SPJ11
100 grams of water at 95°C are saturated with potassium nitrate. If this solution is cooled to 35°C, how much of the solid will precipitate (change from the dissolved state to the solid state)?
To solve this problem, we need to use the concept of solubility and saturation. Solubility is the maximum amount of solute that can dissolve in a given amount of solvent at a specific temperature.
How much of the solid will precipitate (change from the dissolved state to the solid state)?The first step is to determine the solubility of potassium nitrate at 95°C and 35°C. According to the solubility chart, the solubility of potassium nitrate is 247 g/L at 95°C and 32 g/L at 35°C.
Next, we need to calculate how much potassium nitrate is dissolved in the 100 grams of water at 95°C. The solubility of potassium nitrate at 95°C is 247 g/L, so in 100 grams of water, we can dissolve:
(247 g/L) x (100 g / 1000 mL) = 24.7 g of potassium nitrate
Therefore, we have a saturated solution of potassium nitrate with 24.7 grams of potassium nitrate dissolved in 100 grams of water.
When the solution is cooled to 35°C, the solubility of potassium nitrate decreases to 32 g/L. Since we have more than 32 grams of potassium nitrate dissolved in the solution, the excess will precipitate out of the solution. The amount of potassium nitrate that will precipitate can be calculated by subtracting the solubility at 35°C from the initial concentration:
24.7 g - (32 g/L) x (100 g / 1000 mL) = 18.3 g
Therefore, 18.3 grams of potassium nitrate will precipitate out of the solution when it is cooled from 95°C to 35°C.
Learn more about solubility from
https://brainly.com/question/23946616
#SPJ1
What is the approximate percent by mass of oxygen in SO3? 1). 2). 3). 4).
The approximate percent by mass of oxygen in SO3 is 19.98 % which is calculated by using the percent composition formula.
The sulfur trioxide is defined as the chemical compound with molecular formula or chemical formula SO3. In every sample of substance there will be the same number of sulfur atoms and oxygen atoms present in the substance.
The percent composition can be calculated by dividing the mass of the atom by the total mass of the compound or the molecular weight multiplied by 100.
It can be calculated as, C% =MA / MT×100
We know that the atomic weight of Sulphur is 32.059 g/mole and the atomic weight of oxygen is 16.0.
The total mass becomes, 32.059 + 3×16=80.059
.C% = 16.00 / 80.059 ×100
⇒C% =19.98 %
To learn more about percent composition
https://brainly.com/question/28357357
#SPJ4
The correct question is,
What is the approximate percent by mass of oxygen in SO3?
at the concentration equilibrium constant for a certain reaction. here are some facts about the reaction: if the reaction is run at constant pressure, of heat are absorbed. some of the reactants are liquids and solids. the net change in moles of gases is .
To calculate the equilibrium constant for a reaction with heat absorbed, determine equilibrium concentrations and use the law of mass action.
At the concentration equilibrium constant for a certain reaction, heat is absorbed if the reaction is run at constant pressure. Some of the reactants are liquids and solids, and the net change in moles of gases is .
To calculate the equilibrium constant, we need to first determine the equilibrium concentrations of each species. We can do this by using the mass and moles of the reactants and products, the stoichiometric coefficients, and the net change in moles of gases.
Once we have the equilibrium concentrations, we can calculate the equilibrium constant using the law of mass action:
K = [products]/[reactants].Learn more about equilibrium: https://brainly.com/question/517289
#SPJ11
How did the russian scientist first arranged the element in the periodic table?
Dmitri Mendeleev was the Russian scientist who first arranged the elements in the periodic table. He arranged elements in the periodic table by their atomic mass, and he also made sure that elements with similar properties were placed in the same group.
The periodic table is a tabular representation of the chemical elements, which are arranged by atomic number, electron configuration, and chemical properties. The rows of the periodic table are known as periods, and the columns are known as groups or families. Elements in the same group have similar chemical and physical properties.
Mendeleev's contributions to the periodic table
Mendeleev was a Russian chemist who published the first widely recognized periodic table in 1869. In the periodic table, Mendeleev arranged the elements according to their atomic mass. He also left gaps in the periodic table for unknown elements, and he predicted their properties based on the properties of the known elements.
For example, he predicted the properties of germanium, which was discovered later, and he even named it. He was also able to predict the existence and properties of some of the noble gases.
For more question on periodic table click on
https://brainly.com/question/1173237
#SPJ11
which type of radioactive emission is considered the most dangerous?
Gamma radiation are the most dangerous type of radioactive emission as they are the most energetic and can penetrate the human body and damage cells. Alpha particles can cause both short-term and long-term health effects, such as cancer.
Out of alpha, beta and gamma radiation, the most dangerous type of radioactive emission is gamma radiation. This is because gamma rays are penetrating, high-energy rays that can easily penetrate the human body and cause damage to cells and DNA. Gamma radiation, unlike alpha and beta radiation, can penetrate the body's skin and tissue, exposing internal organs to radiation. When gamma rays are absorbed by living cells, they can ionize atoms and molecules, causing damage to DNA and other genetic material in the cell. High doses of gamma radiation can cause immediate symptoms such as radiation sickness and even death. Gamma radiation is frequently emitted by unstable radioactive atoms like uranium and plutonium, which are used in nuclear power plants and nuclear weapons. Workers in these industries and anyone exposed to a nuclear accident or bomb are at a higher risk of exposure to gamma radiation. Alpha radiation is a type of ionizing radiation that is emitted by certain types of unstable atoms. Alpha particles are relatively large and have a short range, so they can be stopped by a sheet of paper or the outer layer of human skin. Beta radiation is a type of ionizing radiation that is emitted by certain types of unstable atoms. Beta particles are much smaller than alpha particles, and they can travel through the human body farther than alpha particles. Gamma radiation is a type of electromagnetic radiation, similar to X-rays, but with higher energy and frequency. Gamma rays are produced by the decay of unstable atomic nuclei and are highly penetrating, meaning they can easily pass through solid objects.
For more such questions on Gamma radiation , Visit:
https://brainly.com/question/4422250
#SPJ11
Which best completes the following analogy?
Right brain music = Left brain :
A shapes
B. speech
C colors
D. art
Iron nail wrapped with copper wire Determine the standard reduction potential of the cathode half-reaction, the standard reduction potential of the anode half-reaction, and the standard potential of the cell. E°cathode ____
(V) E° anode ___ (V) E° cell ___ (V)
The standard reduction potential of the cathode half-reaction is -0.36V,
The standard reduction potential of the anode half-reaction is +0.34V,
and the standard potential of the cell is -0.02V.
The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):
Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.
The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):
Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:
E°cell = E°cathode - E°anode
= -0.36V - (+0.34V)
= -0.02V.
Learn more about the standard potential of the cell here:
https://brainly.com/question/19036092
#SPJ11
2. For each of the reactions below, write a structural reaction equation (which need not be balanced) by
drawing the structures of the reactant & product and name the product formed.
a) ethanol + K,Cr₂O, / H / reflux
b) ethanol + K₂Cr₂O, / H / distil
c) propan-1-ol + K,Cr₂O,/H. / reflux
d) propan-2-ol + K,Cr,O,/ H / reflux
e) 3-methylbutan-1-ol + K,Cr₂O, / H / reflux
f) 4-chloropentan-1-ol + K₂Cr₂O,/ H / distil
Answer:
a) Ethanol + K2Cr2O7 / H+ / Reflux → Acetaldehyde
CH3CH2OH + [O] → CH3CHO
b) Ethanol + K2Cr2O7 / H+ / Distil → Ethene
CH3CH2OH + [O] → CH2=CH2 + H2O
c) Propan-1-ol + K2Cr2O7 / H+ / Reflux → Propanal
CH3CH2CH2OH + [O] → CH3CH2CHO
d) Propan-2-ol + K2Cr2O7 / H+ / Reflux → Propanone (acetone)
(CH3)2CHOH + [O] → (CH3)2CO
e) 3-Methylbutan-1-ol + K2Cr2O7 / H+ / Reflux → 3-Methylbutanal
CH3CH(CH3)CH2CH2OH + [O] → CH3CH(CH3)CH2CHO
f) 4-Chloropentan-1-ol + K2Cr2O7 / H+ / Distil → 4-Chloropentanal
Cl(CH2)3CH2CH(OH)CH3 + [O] → Cl(CH2)3CH2CH=O + H2O
(please could you kindly mark my answer as brainliest)
Phosphorus pentachloride decomposes to phosphorus trichloride and chlorine gas at elevated temperatures by the following reaction:
PCl5(g) PCl3(g) + Cl2(g). If Kc = 1.8 at 250°C, what is the value of Kp at the same temperature? Can someone show me how to get the answer?
Answer choices:
8.8 x 10-2
4.2 x 10-2
77
65
Phosphorus pentachloride decomposes to phosphorus trichloride and chlorine gas at elevated temperatures by the following reaction:
PCl5(g) PCl3(g) + Cl2(g).
If Kc = 1.8 at 250°C, the value of Kp at the same temperature is given as follows. The correct option is 65. (Option D)
Kc = {PCl3 * Cl2} / {PCl5}
At equilibrium;Kp = {PCl3} * {Cl2} / {PCl5}
Since the stoichiometry of the given chemical equation is 1:1:1, Kp = Kc. Kp = 1.8 at 250°C. Therefore the answer is 65
.According to the above data, the calculation of the value of Kp at the same temperature is as follows;
Kc = {PCl3 * Cl2} / {PCl5}1.8 = {PCl3 * Cl2} / {PCl5} (At 250°C)
Kp = {PCl3} * {Cl2} / {PCl5} (At 250°C)
Kp = KcKp = 1.8
Therefore, the correct answer is option D, which is 65.
Learn more about Kp at brainly.com/question/22074421
#SPJ11
Part B Classify each of the following as a Lewis acid or a Lewis base Drag the appropriate items to their respective bins. View Available Hint(s) Reset Help CH:)3N Fe2+ CH:COO CH:OH COz SO3 Lewis acids Lewis bases'
Lewis acids; Fe^3+, SO3, NO2, CO
Lewis base; (CH3)2NH, H^-, Br^-
What Lewis acids and Lewis bases?In chemistry, a Lewis acid is a substance that can accept a pair of electrons (a Lewis base) to form a covalent bond. This concept was introduced by American chemist Gilbert N. Lewis in 1923. A Lewis acid is also defined as an electron pair acceptor, which means that it can form a bond by accepting a pair of electrons from another molecule or ion.
A Lewis base, on the other hand, is a substance that can donate a pair of electrons (a Lewis acid) to form a covalent bond.
Learn more about Lewis acid:https://brainly.com/question/15570523
#SPJ1
nonenzymatic e1 reactions can often result in a mixture of more than one alkene product. elimination of 'hx' from the following starting compound, for example, could yield three different possible alkene products, true or false?
The given statement is true that nonenzymatic E1 reactions can often result in a mixture of more than one alkene product. This is due to the presence of different possible elimination products.
Nonenzymatic E1 reactions: E1 is a chemical reaction mechanism that includes the elimination of a leaving group (such as HX) from an organic molecule to create a double bond or alkene. This is a two-step process in which the first step is the formation of a carbocation intermediate.The nonenzymatic E1 reactions can often result in a mixture of more than one alkene product because the carbocation intermediate that forms can be attacked by nucleophiles in various directions, leading to the formation of different elimination products. The regiochemistry of the reaction is determined by the most stable carbocation intermediate formed from the initial step of the reaction.In this case, elimination of HX from the given starting compound can yield three different possible alkene products due to the presence of three different hydrogen atoms that can eliminate. Hence, the given statement is true.Learn more about E1 reactions: https://brainly.com/question/30887510
#SPJ11
Which equation represents energy being absorbed as a
bond is broken?
A) H+H + H2 + energy
B) H+H+ energy H2
C) H2 + H+H+ energy
D) H2 + energy + H+H
The reaction demonstrates that energy is needed to dissociate the hydrogen atoms from one another, and as a result energy is consumed.
When a chemical bond is broken, energy is required to break the bond, and thus energy is absorbed. The equation that represents energy being absorbed as a bond is broken is option D, which is:
H2 + energy → 2H
In this equation, the energy is shown as a reactant on the left-hand side of the arrow, indicating that it is required for the reaction to proceed. The H2 molecule on the left-hand side represents a molecule with a covalent bond between two hydrogen atoms. When energy is added to the molecule, the bond between the two hydrogen atoms is broken, and the atoms become separated. This results in the formation of two hydrogen atoms on the right-hand side of the arrow, each with one unpaired electron.
Overall, the reaction shows that energy is required to break the bond between the hydrogen atoms, and thus energy is absorbed during the process.
To learn more about energy refer to:
brainly.com/question/626780
#SPJ4
Indicate which substance in each of the following pairs of substances you expect to have higher entropy. assume that you have a mole of each substance and all substances are at the same temperature? a. H2S2(g) b. H2S2(l) [Choose] a. CsBr(s) b. Sro(s) [Choose] a. H2O(l) b. H2O2(l) [Choose ] a. SO3(g) b. SO3(s) [Choose]
H₂S₂(g) is expected to have higher entropy than H₂S₂(l). CsBr(s) is expected to have higher entropy than Sro(s). H₂O(l) is expected to have higher entropy than H₂O₂(l). SO₃(g) is expected to have higher entropy than SO₃(s).
The entropy of the substance is determined by the amount of randomness and disorder it has. The higher the entropy, the greater the randomness of the substance. At the same temperature and pressure, a pure solid has a lower entropy than a pure liquid, which in turn has a lower entropy than a pure gas. The entropy of a substance is determined by its physical state, molecular structure, and the quantity of the substance.
H₂S₂ is a chemical compound with two sulfur atoms and two hydrogen atoms. The state of H₂S₂(g) is a gas, and H₂S₂(l) is a liquid. Since the gas state is more disordered than the liquid state, H₂S₂(g) is expected to have higher entropy than H₂S₂(l).
Both CsBr(s) and Sro(s) are in the solid-state. However, CsBr(s) has a higher entropy than Sro(s) because it has more molecules. This means that CsBr(s) has a greater degree of randomness and disorder than Sro(s).
H₂O(l) and H₂O₂(l) are both liquid states, but H₂O(l) has higher entropy because it has more degrees of freedom. H₂O(l) can rotate and translate freely, while H₂O₂(l) has a rigid structure that does not allow for the same degree of movement.
SO₃(g) is in the gaseous state, while SO₃(s) is in the solid-state. At the same temperature, the entropy of SO₃(g) is greater than that of SO₃(s) because the gas state is more disordered than the solid-state.
Learn more about Entropy here:
https://brainly.com/question/20166134
#SPJ11
Why were dirigibles considered to be the wave of the future in travel?
Answer:
jkhihjijhbjbjk
Which organelle breaks down chemicals in the cell?
The organelle that breaks down chemicals in the cell is the lysosome.
Lysosomes are membrane-bound organelles that contain digestive enzymes that are responsible for breaking down various biomolecules, such as proteins, nucleic acids, carbohydrates, and lipids, into their constituent building blocks. These enzymes are able to break down these molecules through hydrolysis, where water is used to break the chemical bonds. Lysosomes play a crucial role in maintaining cellular homeostasis by removing unwanted or damaged cellular components, recycling macromolecules, and its defending against invading microorganisms. Dysfunction of lysosomes can lead to a variety of diseases known as lysosomal storage disorders.
To know more about Lysosomes, here
brainly.com/question/28202356
#SPJ4
In Part 4 of this experiment, you will construct an electrolytic cell in which copper metal is oxidized to produce Cu2+ ions in solution and H+ ions are removed from solution to produce hydrogen gas. Cu (s) → Cu2+ (aq) + 2 e E = -0.34 V 2 H+ (aq) + 2e → H2(g) E = 0.0 V a) Write the overall reaction and determine the corresponding cell potential. b) Is this reaction spontaneous? Explain why or why not. c) How can we get this reaction to occur? d) To maximize the current, why must the burette be placed about a half inch above the bottom of the beaker? e) What will you use to clean the copper electrodes? Why is it important to use clean copper electrodes in this experiment?
d) The burette must be placed about a half inch above the bottom of the beaker to maximize the current because this will allow enough space for the hydrogen gas produced to escape, allowing the reaction to continue.
How cell potential is determined positive or negative?Cell potential, or voltage, is determined by the difference in charge between the inside of a cell and the outside of a cell. Positively charged molecules in a cell, such as sodium and potassium ions, increase the positive charge inside the cell. Negative molecules, such as chloride ions, decrease the positive charge inside the cell, creating a negative potential.
Explanation.
a) Overall reaction: 2H⁺ (aq) + Cu (s) → Cu²⁺ (aq) + H₂ (g) Cell potential: -0.34 V
b) No, this reaction is not spontaneous because the cell potential is negative.
c) This reaction can be made to occur by providing an external source of electrical energy, such as a battery, to drive the reaction.
e) The copper electrodes should be cleaned with steel wool, sandpaper or a wire brush. It is important to use clean copper electrodes in this experiment to ensure that the reaction proceeds efficiently and that the copper is correctly oxidized to form copper ions in solution.
To know more about battery, visit:
https://brainly.com/question/19225854
#SPJ1
What mass of hydrogen will react with 84g of N2
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction then which way will the reaction proceed? a. The reaction is at equilibrium and the reaction will proceed at equal rates in the reverse and forward direction. b. The reaction will proceed to the right (products side) c. The reaction equation is required to answer this question d. The reaction will proceed to the left( reactants side)
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).
This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.
In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.
To know more about equilibrium constant, refer here:
https://brainly.com/question/15118952#
#SPJ11
when flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as _____. it is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.
Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.
Learn more about celiac disease here: https://brainly.com/question/16779711
#SPJ11
What correlates with metallic behavior
Answer:
large atomic size and low ionization energy.
Explanation:
Metallic behavior correlates with large atomic size and low ionization energy. Thus, metallic behavior increases down a group and decreases from left to right across a period. Elements in Groups 1A(1) and 2A(2) are strong reducing agents; nonmetals in Groups 6A(16) and 7A(17) are strong oxidizing agents.
write a list of rules for recognizing and naming binary molecular compounds from their chemical formulas
The following are the rules for recognizing and naming binary molecular compounds from their chemical formulas:
1. The first element in the chemical formula will be the name of the first element in the compound.
2. The second element in the chemical formula will be the name of the second element in the compound.
3. If the first element is a metal, the second element will end in “-ide”.
4. If the first element is a nonmetal, the second element will end in “-ate” or “-ite”.
5. The prefixes “mono-, di-, tri-, tetra-, penta-, and hexa-” are used to indicate the number of atoms of each element in the compound.
6. When the prefixes are not used, the number of atoms of each element is implied by the subscript.
7. If the subscript is written as a fraction, the fraction is changed to a whole number when forming the compound name.
Learn more about molecular compounds at brainly.com/question/30328923
#SPJ4
The rules for recognizing and naming binary molecular compounds are written focusing on the lower groups and the higher groups.
The rules for recognizing and naming binary molecular compounds from their chemical formulas are as follows:
1. The element with the lower group number is written first in the formula, and its full name is used.
2. The element with the higher group number is written second in the formula, and its stem name is used along with the suffix -ide.
3. The prefixes mono-, di-, tri-, tetra-, penta-, and so on are used to indicate the number of atoms present for each element in the molecule.
4. The prefix mono- is omitted for the first element in the formula.
5. The ending -a or -o in the prefix is omitted if the element name begins with a vowel, and only the vowel of the prefix is used in the compound name.
To learn more about compounds, click here:
https://brainly.com/question/26487468
#SPJ11
