Two balls of clay are thrown and perfectly collide with each other. One ball of clay had mass of 42.9kg and a velocity of 58 m/s. The other ball of clay had a mass of 99.4 kg and an unknown velocity before the collision. If the velocity of the combined object was -38.6m/s after the collision. What was the velocity of the second clay ball before the collision?
Two objects have a perfectly elastic collision The first object has a mass of 34.2 kg and a velocity of 65.5m/s before the collision. The second object had a mass of 97.9kg and a velocity of -29.7 m/s before the collision. If the first object's velocity was -75.61m/s after the collision, what was the second objects velocity after the collision?

Two Balls Of Clay Are Thrown And Perfectly Collide With Each Other. One Ball Of Clay Had Mass Of 42.9kg

Answers

Answer 1

Answer:

19.59m/s

Explanation:

Using the law of conservation of linear momentum,

Total momentum before collision is equal to the Total momentum after collision.

Two Balls Of Clay Are Thrown And Perfectly Collide With Each Other. One Ball Of Clay Had Mass Of 42.9kg

Related Questions

What do you know about the force that you exert on the chair?

Answers

The normal force exerted by the chair on us, when we sit on the chair.

When an object interacts with another object, it feels a push or a pull. Each object that two objects make contact with experiences a force. Once the encounter is over, the force between the two objects is gone. Forces are merely interactions; they do not exist independently.

When two objects interact and appear to be in physical contact with one another, contact forces are generated. Several types of contact forces include frictional forces, tensional forces, normal forces, air resistance forces, and applied forces. Even when two interacting objects are far apart from one another, action-at-a-distance forces are still present.

To know more about  force visit : brainly.com/question/13191643

#SPJ4

Name:
For the following problems see the appendices for the relevant data.
1. Use the equation of Hydrostatic Equilibrium
dP(r)
dr = −
GM(r)
r
2
ρ(r)
to estimate the central pressure of the Sun by considering the whole
Sun as one shell.
2. Now use the prior example and the equation of state for an ideal gas
to estimate the central temperature of the Sun.
3. If the gas found within the darker region of a Sunspot has a Teff = 3800
K, then calculate the ratio of the total intensities of the Sunspot to the
surface of the Sun. What is the ratio of intensities at λ = 550 nm?
4. Calculate the energy released at both every stage and total stage of the
triple alpha process. How does this compare to both the CNO cycle
and the PP chain?

Answers

Therefore, T_c~1.2×〖10〗^7 K is the equation for hydrostatic equilibrium.

What is meant by hydrostatic equilibrium?

A fluid's state where all of its surfaces are horizontal, coinciding, and have constant mass (or density). The opposing forces of gravity and pressure are perfectly balanced. The criterion of hydrostatic equilibrium, which is present in both planetary geology and astrophysics, is used to differentiate between dwarf planets and small solar system entities. The term "hydrostatic" is used to indicate a constant balance between pressure pushing up & gravity pulling down in a fluid.

Where is hydrostatic equilibrium found?

A star is said to be in "hydrostatic equilibrium" when the gravitational force, caused by the mass of the star, and the gas pressure, caused by energy production in the star's core, balance each other out during the bulk of the star's existence.

A star must constantly fight against gravity in order to exist. Gravity is constantly pushing the star in the direction of collapse. But because the star's core is so hot, pressure is put on the gas. When the gravitational pull is equalized by this pressure, the star enters a condition of equilibrium known as hydrostatic pressure.

To know more about Hydrostatic Equilibrium visit:

https://brainly.com/question/13696206

#SPJ4

which best explains the law of conservation of mass

Answers

The law of conservation of mass emphasizes the fact that it is not possible to create or destroy the mass in this universe. Mass just changes its form from one to another, it is never created nor destroyed.

The statement mentioned above states that the mass of reactants and products have equal mass irrespective of the physical state.

If the mass of reactants and products becomes unequal, then it would contradict the law of conservation. However, it is clearly mentioned that the mass of reactants and products will remain the same, hence complimenting the law of conservation of motion.

Therefore, the law of conservation of mass is best described by - The mass of the reactants and products is equal and this mass is not dependent on the physical state of the substances.

To know more about mass, refer: https://brainly.com/question/19694949

#SPJ4

[NOTE: THIS IS AN INCOMPLETE QUESTION. THE COMPLETE QUESTION IS: Which best describes the law of conservation of mass?

(A) The coefficients in front of the chemicals in the reactants should be based on the physical state of the products.

(B) Products in the form of gases are not considered a part of the total mass change from reactants to products.

(C) When reactants contain both a solid and a liquid, the solid counts toward the overall mass and the liquid does not.

(D) The mass of the reactants and products is equal and is not dependent on the physical state of the substances.]

Suppose two identical objects are sitting 1 meter apart. The gravitational force between them is 9N. What would the gravitational force be if they were moved to 3 meters apart?

Answers

If the distance between the objects is increased, the new force would be 1N

What is the gravitational force?

The term gravitational force has to do with the force that acts between two masses that are on the earth's service.

Now we know that the force that acts on the object can be given by;

F = Gm1m2/r^2

F = force that acts on the object

G = gravitational constant

m1 and m2 = masses of the objects

r = distance about

We can now see that the force that acts on the object would be 1 N.

Learn more about Gravitational force:https://brainly.com/question/12528243

#SPJ1

Questions 14-16
The following diagrams each show an object of mass m moving with instantaneous velocity v. in
each case, F is the applied force, and f is the frictional force exerted on the object. In case I, the
object moves in a circle with constant speed.
(A) None
(B) I only
(C) II only
(D) III only
(E) I, II, and III
14. In which of these cases are velocity and the acceleration in the same direction at the
instant shown?
15. In which of these cases are the velocity and acceleration in opposite directions at the
instant shown?
16. In which of these cases are the velocity and the net force perpendicular to each other at
the instant shown?

Answers

14. None of these cases are velocity and the acceleration in the same direction at the instant.

15. I, II, and III of these cases are the velocity and acceleration in opposite directions at the instant

16. case I of these cases are the velocity and the net force perpendicular to each other at the instant.

When is acceleration and velocity in same direction?

If the velocity and acceleration are in the same direction (both have the same sign and both positive or negative), the object is accelerating. If the velocity and acceleration are opposite (with opposite signs), the object is slowing down.

Can learn more about net forces from https://brainly.com/question/17212687

#SPJ1

Q1. Hannah has three rods (A, B and C) made from different
metals. One rod is a magnet; one is made of copper; and one is
made of iron. She does not know which rod is which. Each rod
has a dot at one end. (a)Hannah uses only a bar magnet to identify
each rod. She puts each pole of the bar magnet next to the
dotted end of each rod. Complete Hannah's observations in the
table below. Write if each rod is copper, iron or a magnet.

Answers

The iron rod gets magnetized when placed near a bar magnet due to magnetic induction while the copper rod does not get magnetized.

What is magnetic induction?

Magnetic induction is the process through which a regular piece of iron briefly develops magnetic properties as a result of another magnet being nearby.Consider a tong nail. Place it on a stand's arm. Spread some iron pins throughout the stand's foundation. You'll discover that the pins are not drawn to the nail. Touch a magnet to the nail's tip now. Some pins stick to the nail as the end is brought close to the head. It occurs as a result of the nail transforming into a magnet and acquiring magnetic properties. when the magnet is taken out of the nail's head the pins are about to drop.

To know more about magnetic induction, click the link given below:

https://brainly.com/question/26366866

#SPJ9

is lithium batteries a limited quantity item

Answers

Lithium and lithium-ion batteries are transported in both large and small volumes.

For instance, a single box could contain as little as five batteries, whereas a pallet could hold over 1,000, or the batteries could be enclosed in or packed with equipment.

On the other hand, lithium batteries, which contain lithium metal, cannot be recharged. Lithium-ion batteries can be recharged but do not contain lithium metal.

Lithium and lithium-ion batteries are mostly utilized in consumer applications and are exempt from dangerous goods/hazardous materials rules. Small lithium batteries are often used in timepieces and cameras. Lithium-ion batteries are extensively used in laptops and cell phones.

To read more about lithium batteries, visit https://brainly.com/question/24876978

#SPJ4

A 4,155 kg car moving at 28.3 m/s hits a stationary truck with a mass of 3,172 kg. If the two vehicles become stuck together in the collision, how fast do they move away from the point of impact?

Answers

Answer:

Approximately [tex]16.0\; {\rm m\cdot s^{-1}}[/tex].

Explanation:

When an object of mass [tex]m[/tex] travels at a velocity of [tex]v[/tex], the momentum [tex]p[/tex] of that object will be [tex]p = m\, v[/tex].

In this example, the momentum of the car before the collision will be:

[tex]\begin{aligned}p &= m\, v \\ &= (4155\; {\rm kg})\, (28.3\; {\rm m\cdot s^{-1}}) \\ &\approx 1.17587\times 10^{5}\; {\rm kg \cdot m\cdot s^{-1}} \end{aligned}[/tex].

Since the truck was initially not moving, the initial momentum of the truck will be [tex](3172\; {\rm kg})\, (0\; {\rm m\cdot s^{-1}}) = 0\; {\rm kg \cdot m\cdot s^{-1}}[/tex].

Momentum is conserved in collisions. In other words, the sum of the momentum of the truck and the car will be the same right before and after the collision.

The sum of the momentum of the truck and the car was approximately [tex]1.17587\times 10^{5}\; {\rm kg \cdot m\cdot s^{-1}}[/tex] right before the collision. By the conservation of momentum, the sum of the momentum of the two vehicles right after the collision will also be [tex]1.17587\times 10^{5}\; {\rm kg \cdot m\cdot s^{-1}}\![/tex].

The velocity of the two vehicles right after the collision will be the same since the vehicles are stuck together. Let [tex]v[/tex] denote this velocity.

The sum of the mass of the two vehicles is [tex]m = (4155\; {\rm kg}) + (3172\; {\rm kg}) = 7327\; {\rm kg}[/tex]. Divide the total momentum of the two vehicles by their total mass to find the velocity:

[tex]\begin{aligned}v &= \frac{p}{m} \\ &\approx \frac{1.17587\times 10^{5}\; {\rm kg \cdot m\cdot s^{-1}}}{7327\; {\rm kg}} \\ &\approx 16.0\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

1000 cm³ of air at 20 °C and 101.35 kPa is heated at constant pressure until its volume doubles. a) Use the ideal gas equation to calculate the final temperature of the gas.​

Answers

From Charles's law, the magnitude of the final temperature is 586 K

What is an Ideal Gas ?

An Ideal gas is a gas which obeys ideal gas equation at all pressures, volumes and temperatures. The ideal gas equation can be express as

PV = nRT

Where

P = pressureV = volumen = number of moleR = universal molar gas constantT = Temperature

Given that 1000 cm³ of air at 20 °C and 101.35 kPa is heated at constant pressure until its volume doubles.

From the ideal gas equation,

P1 = P2 = 101.35 kPaV1 = 1000 cm³V2 = 2000 cm³T1 = 20 + 273 = 293 KT2 = ?

To calculate the final temperature of the gas, we will use the formula below

V1/T1 = V2/T2

Since Pressure is constant

Substitute the necessary parameters into the formula

1000/293 = 2000/T2

Cross multiply

1000T2 = 586,000

T2 = 586,000/1000

T2 = 586 K

Therefore, the final temperature of the gas is 586 K

Learn more about Ideal Gas here: https://brainly.com/question/20212888

#SPJ1

Obtain an expression for the viscous force acting on a sphere of radius r moving in a viscous fluid with velocity v, if the viscosity coefficient is η. ​

Answers

The force of viscosity is F = k r v η. Spherical balls of radius R are falling in a viscous fluid of viscosity η with a velocity v.

What is viscous force?

Viscosity refers to a material's capacity to resist movement between its layers. It is the force that resists relative motion between the layers. It is also known as viscous force.

What is viscous force formula?

In the above equation, the shear force is the viscous force, which is the only internal resistance that causes shear stress to develop along with the fluid layers. As a result, the viscous force formula will be given as. F=Aμdudy.

Hence  F = k r v η is a correct answer.

To know more about viscous force follow link
https://brainly.com/question/25832132
#SPJ9

PLEASE HELP
Suri, a scientist at NASA, created models of each planet. The models contain the same properties as the actual planets, but at a smaller scale. The first property being tested is the density of the planets. Suri places each planet into a container of water. Which planet will float on top of the water?
A) Mercury
B) Venus
C) Neptune
D) Saturn

Answers

Suri places each planet into a container of water. Saturn will float on top of the water because of the least density among all the planets. Therefore, option (D) is correct.

What is the density?

The density can be defined as the mass per unit volume. The average density of a substance is equal to the total mass divided by its total volume.

Mathematically, formula for density can be described as,

Density = mass/ volume.

The international S.I. unit of density is represented as Kg/m³. The density is an intrinsic characteristic of a substance as it doesn't depend on the size.

As the Density was assumed and for the options, the density can be,

For, Mercury can be 5.4 g/cm³ , Venus can be 5.2 g/cm³ , Neptune can be 1.6 g/cm³, and Saturn is 0.7 g/cm³. Therefore, Saturn will float on top of the water.

Thus, Option D is the correct answer.

Learn more about density,

https://brainly.com/question/28929608

#SPJ1

A coin is tossed vertically upward and reaches a maximum height of 0.90 m before it comesback down. With what velocity was it thrown, and how long was it in the air?
with explanation please

Answers

Answer:

how long the coin was in the air was about 45 how I got your answer was by dividing 900 by 20 bc when u divide u have to add a 0 so that's how I got 900 then I just divided and got 45

All the matter that will ever be was created from the pure energy
of the...

A: sun.

B: cosmic (microwave) background radiation.

C: extreme stars.

D: Big Bang.

Answers

The universe's continual supply of energy and matter comes from the enigmatic big bang. Even if the total amount remains constant, this spreads out over time and becomes less and less beneficial.

However, the energy required for the Big Bang at the beginning of the Universe—that is, of everything—must have come from somewhere. Many cosmologists believe that it originates in the phenomenon known as quantum uncertainty, which allows energy to appear seemingly out of thin air.

In the instants following the Big Bang, the majority of the hydrogen and helium in the universe were produced. Later came the heavier components. A large variety of elements are created and dispersed by supernova explosions.

To know more about energy, visit

https://brainly.com/question/1932868

#SPJ1

A mass on the end of a length of rope is being swung in a circle of radius 3.2 m at an angular velocity of 0.71 rad/s. How fast is it moving?​

Answers

Answer:

[tex]\huge\boxed{\sf v = 2.27\ m/s}[/tex]

Explanation:

Given data:

Angular velocity = ω = 0.71 rad/s

Radius = r = 3.2 m

Required:

Linear velocity = v = ?

Formula:

v = rω

Solution:

v = (3.2)(0.71)

v = 2.27 m/s

[tex]\rule[225]{225}{2}[/tex]

A 8 kg body moves towards the west with a momentum of 30 kg m s¹. A 20 N force to the east acts on the body for a period of 15 s. Determine the magnitude of i) the impulse of the force. ii) the change in the momentum of a body. iii) the final momentum of the body. iv) the final velocity of the body, [5 marks]​

Answers

Mass of body = 8kg

Momentum of body = [tex]30kgms^{-1}[/tex]

Force = 20N

Time for which force acts = 5s

Impulse of the force = Force × time for which force acts

= 20 × 5= 100Ns

Change of momentum = Impulse of the force= 100Ns

Therefore, the impulse of the force= 100Ns

Change of momentum is 100Ns

The final momentum of the body = 100Ns
The final velocity of the body is 5m/s

What is momentum?

Momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both magnitude and direction.

According to Isaac Newton's second equation of motion, the force applied on a particle is equal to the time rate of change of momentum. Check out Newton's laws of motion.

According to Newton's second law, if a particle is subjected to a constant force for a specific amount of time, the result of the force and time (referred to as the impulse) is equal to the change in momentum.

To know more about momentum, click the link given below:

https://brainly.com/question/16076524

#SPJ9

Explain the difference between Pavlov's classical Conditioning, and Skinner's Operant
Conditioning, give examples to illustrate how behavior can be learned according to each
one of those conditioning. Explain the example after explaining the process.

Answers

Skinner's Operant Conditioning focus stressed that the  consequences of a behavior will indicate if there is  possibility of it being repeated and also  the human behavior  can be attributed to something in a person's environment.

Pavlov's classical Conditioning stressed that two stimuli can be linked  together  so that there can be new learned response in indivisuals .

Example of Pavlov's classical Conditioning  is that a dogs could be conditioned to salivate at the sound of a bell if it was programmed to ring at the time of food.

Example of Skinner's Operant Conditioning is that of negative reinforcement which was demonstrated by placing a rat in  Skinner box  which then subjected to unpleasant electric current  and make it to experience some discomfort.

What is Classical conditioning?

Classical conditioning can as well be described as the Pavlovian or respondent conditioning which is the learning that do take place when two stimuli are linked together  and they can bring about new learned response in a person or animal.

Operant conditioning  was the one that stressed that the cause of human behavior  can be linked to the something in a person's environment.

Learn more about conditioning at:

https://brainly.com/question/10399309

#SPJ1

A spherical bowling ball of mass 7 kg and radius 0.18 m rolls down a hill that has a vertical height of 7 m. If the ball started from rest at the top, what is its angular momentum at the bottom of the hill? Use two sig figs.

Answers

Answer:

er so ue 0.984 kg study your self brhh

Microwave ovens operte at 2.45 GHz, Bluetooth electronics and internet routers work at2.4 GHz.Predict which object has the longer wavelength, showing your calculations evidence, to support your prediction .

Answers

Answer:

The object with the longer wavelength is the microwave oven. This can be determined using the equation λ = c/f, where λ is the wavelength, c is the speed of light (3 x 10^8 m/s), and f is the frequency.

For a microwave oven:

λ = (3 x 10^8 m/s) / (2.45 GHz)

λ = 1.22 x 10^-2 m

For a Bluetooth electronic/internet router:

λ = (3 x 10^8 m/s) / (2.4 GHz)

λ = 1.25 x 10^-2 m

Therefore, the microwave oven has a longer wavelength.

Explanation:

Other Questions
The founder effect differs from a population bottleneck in that the founder effect ________.a) involves the isolation of a small colony of individuals from a larger populationb) is a type of natural selectionc) can occur only on an oceanic island colonyd) requires a small population What does the suffragette defaced? which of the following conditions is true when a producer minimizes the cost of producing a given level of output? multiple choice the marginal product per dollar spent on all inputs is equal. the mrts is equal to the ratio of the quantity of inputs. the marginal products of all inputs are equal. the marginal product per dollar spent on all inputs is equal and the mrts is equal to the ratio of the quantity of inputs. 5. Which of the following are flammable?(a) gasoline(b) wooden crates(c) straw(d) metal boxes What is the best way to participate in democracy? janelle is a 21-year-old american woman, currently in college, and can be categorized into the developmental period of emerging adulthood. which of the following is likely true about janelle, if she is typical in her development through this stage? Which function represents a function with direct variation? christopher has no memory of? classify each molecule as a purine or a pyrimidine. 3.If the pure expectations theory of the term structure is correct, whichof the following statements would be CORRECT?a.An upward sloping yield curve would imply that interest rates areexpected to be lower in the future.b.If a 1-year Treasury bill has a yield to maturity of 7% and a 2-yearTreasury bill has a yield to maturity of 8%, this would imply themarket believes that 1-year rates will be 7.5% one year from now.c.The yield on a 5-year corporate bond should always exceed the yieldon a 3-year Treasury bond.d.Interest rate price risk is higher on long-term bonds, butreinvestment rate risk is higher on short-term bonds.e.Interest rate price risk is higher on short-term bonds, butreinvestment rate risk is higher on long-term bonds what is mesothermal climates In a class of 94 students taking mathematics biology and chemistry, equal number of students are taking only 2 subjects. The number of students taking maths,biology and chemistry are40,35 and38 respectively. Seven students are taking maths and biology. FindI. The number of students taking all courses II. The number of students taking maths biology and chemistry III. The number of students taking biology and chemistry Select the scenarios that can result in active immunity.bone marrow transplantantibodies cross the placentaimmunization with a vaccineinfection with a pathogenplasma transfusions to treat Ebola virus infection Fighting took place in eatern europe and middle eat. Where ele wa another battlefront that wa critical during wwi The graph of F is shown below evaluate each integral by interpreting it in terms of area Which of the following materials may be displayed, distributed, or provided to consumers attending an educational event?a. Enrollment Guidesb. Plan-Specific Brochuresc. Enrollment Applicationsd. Agent business cards and lead cards which of the following provides security for datagram-based applications by allowing them a communication method designed to prevent eavesdropping, tampering, and message forgery? _____ provides employees with specific, identifiable knowledge and skills for use in their present jobs. a. Development b. Recruiting c. Networking d. Training Libro de letra cero 11 lleno Represent the following statement on a number line: I have anywhere from $5 to $8 in my pocket.