Two forces act on the screw eye. If F = 600 N, determine the magnitude of the resultant force and the angle θ if the resultant force is directed vertically upward.

Answer:

13.33 K

Explanation:

Given that,

Heat absorbed, Q = 30 J

Mass of nail, m = 5 g = 0.005 kg

The specific heat capacity of the nail is 450 J/kg-°C.

We need to find the increase in the temperature during the process. The heat absorbed in a process is as follows:

[tex]Q=mc\Delta T\\\\\Delta T=\dfrac{Q}{mc}\\\\\Delta T=\dfrac{30}{0.005\times 450}\\\\=13.33\ K[/tex]

So, the increase in temperature is 13.33 K.

Answer: masses

Explanation:

Trust me

Answer:

20 seconds

Explanation:

We are given 2 givens in the first statement

v0=0 and a=5

And we are trying to find time needed to cover 1km or 1000m.

So we use

x-x0=v0t+1/2at²

Plug in givens

1000=0+2.5t²

solve for t

t²=400

t=20s

Answer:

P =40.69 atm

Explanation:

We need to find the approximate pressure at a depth of 400 m.

It can be calculated as follows :

P = Patm + ρgh

Put all the values,

[tex]P=1\ atm+1025 \times 9.81\times 400\times 9.8692\times 10^{-6}\ atm/Pa\\\\P=40.69\ atm[/tex]

So, the approximate pressure is equal to 40.69 atm.

Answer:

A will attract

B will repare

Answer:

82.25 moles of He

Explanation:

From the question given above, the following data were obtained:

Volume (V) = 10 L

Mass of He = 0.329 Kg

Temperature (T) = 28.0 °C

Molar mass of He = 4 g/mol

Mole of He =?

Next, we shall convert 0.329 Kg of He to g. This can be obtained as follow:

1 Kg = 1000 g

Therefore,

0.329 Kg = 0.329 Kg × 1000 g / 1 Kg

0.329 Kg = 329 g

Thus, 0.329 Kg is equivalent to 329 g.

Finally, we shall determine the number of mole of He in the tank. This can be obtained as illustrated below:

Mass of He = 329 g

Molar mass of He = 4 g/mol

Mole of He =?

Mole = mass / molar mass

Mole of He = 329 / 4

Mole of He = 82.25 moles

Therefore, there are 82.25 moles of He in the tank.

Answer:

Option A. –5 m/s²

Explanation:

From the question given above, the following data were obtained:

Initial velocity (v₁) = 9 m/s

Initial time (t₁) = 0 s

Final velocity (v₂) = –6 m/s

Final time (t₂) = 3 s

Acceleration (a) =?

Next, we shall determine the change in the velocity and time. This can be obtained as follow:

For velocity:

Initial velocity (v₁) = 9 m/s

Final velocity (v₂) = –6 m/s

Change in velocity (Δv) =?

ΔV = v₂ – v₁

ΔV = –6 – 9

ΔV = –15 m/s

For time:

Initial time (t₁) = 0 s

Final time (t₂) = 3 s

Change in time (Δt) =?

Δt = t₂ – t₁

Δt = 3 – 0

Δt = 3 s

Finally, we shall determine the acceleration of the object. This can be obtained as follow:

Change in velocity (Δv) = –15 m/s

Change in time (Δt) = 3 s

Acceleration (a) =?

a = Δv / Δt

a = –15 / 3

a = –5 m/s²

Thus, the acceleration of the object is

–5 m/s².

Answer:

K = 0 J

Explanation:

Given that,

The mass of the particle, m = 1.2 mg

The speed of the particle, [tex]v=1.62\times 10\ cm/h[/tex]

We need to find the kinetic energy of the particle at time t = 0 s.

At t = 0 s, the particle is at rest, v = 0

So,

[tex]K=\dfrac{1}{2}mv^2[/tex]

If v = 0,

[tex]K=0\ J[/tex]

So, the kinetic energy of the particle at time t = 0 s is 0 J.

Answer:

They can be mixed together to make almost any other color.

Explanation:

All the three primary colors can mix to form white color.

Blue and red mix to form a black color.

Answer:

The weight of an object is the force on it caused by the gravity due to the planet. The weight of an object and the gravitational field strength are directly proportional. For a given mass, the greater the gravitational field strength of the planet, the greater its weight.

Weight can be calculated using the equation:

weight = mass × gravitational field strength

This is when:

weight (W) is measured in newtons (N)

mass (m) is measured in kilograms (kg)

gravitational field strength (g) is measured in newtons per kilogram (N/kg)

Answer "a" would be correct.

Answer:

d

Explanation:

There's an acceleration from gravity, thus the velocity is becoming faster and faster as it reaches the ground. Thus its D

Brainliest please~

Answer:

Explanation:

From the information given:

The angular frequency ω = 430 π rad/s

The wavenumber k = 4.00π which can be expressed by the equation:

k = ω/v

∴

4.00 =  430 /v

v = 430/4.00

v = 107.5 m/s

Similarly: k  = ω/v = 2πf/fλ

We can say that:

k = 2π/λ

4.00 π = 2π/λ

wavelength λ = 2π/4.00 π

wavelength λ = 0.5 m

frequency of the wave can now be calculated by using the formula:

f = v/λ

f = 107.5/0.5

f = 215 Hz

Also, the Period(T) = 1/215 secs

The time at which particle proceeds from point A  to its maximum upward displacement  and to its maximum downward displacement  can be computed as t = T/2;

Thus, the distance(x) covered by each wave during this time interval(T/2) will be:

x = v * t

x = v * T/2

x = λ/2

x = 0.5/2

x =  0.25 m

Answer:

angular acceleration.

Explanation:

Newton's law of universal gravitation states that the force of attraction (gravity) acting between the Earth and all physical objects is directly proportional to the Earth's mass, directly proportional to the physical object's mass and inversely proportional to the square of the distance separating the Earth's center and that physical object.

Generally, when a rigid body is made to rotate about a fixed axis, all the points in the body would typically have the same angular acceleration, angular displacement, and angular speed.

Explanation:

A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overcurrent/overload or short circuit. Its basic function is to interrupt current flow after protective relays detect a fault.

Circuit breakers have been designed to detect when there is a fault in the electricity, so it will “trip” and shut down electrical flow. ... This detection is key to preventing surges of electricity that travel to appliances or other outlets, which can cause them to break down

Answer:

7.8% of the original volume.

Explanation:

From the given information:

Temperature [tex]T_1[/tex] = 22° C = 273 + 22 = 295° C

Pressure [tex]P_1[/tex] = 240 kPa

Temperature [tex]T_2[/tex] = 45° C

At initial temperature and pressure:

Using the ideal gas equation:

[tex]P_1V_1 =nRT_1[/tex]

making V_1 (initial volume) the subject:

[tex]V_1 = \dfrac{nRT_1}{P_1}[/tex]

[tex]V_1 = \dfrac{nR*295}{240}[/tex]

Provided the pressure maintained its rate at 240 kPa, when the temperature reached 45° C, then:

the final volume [tex]V_2[/tex] can be computed as:

[tex]V_2 = \dfrac{nR*318}{240}[/tex]

Now, the change in the volume ΔV =  V₂ - V₁

[tex]\Delta V = \dfrac{nR*318}{240}- \dfrac{nR*295}{240}[/tex]

[tex]\Delta V = \dfrac{23nR}{240}[/tex]

∴

The required fraction of the volume of air to keep up the pressure at (240) kPa can be computed as:

[tex]= \dfrac{\dfrac{23nR}{240}}{ \dfrac{295nR}{240}}[/tex]

[tex]= {\dfrac{23nR}{240}} \times { \dfrac{240}{295nR}}[/tex]

[tex]= 0.078[/tex]

= 7.8% of the original volume.

[tex]A=2.01×10^{16}\:\text{nuclei}[/tex]

Explanation:

Given:

[tex]\lambda = 4.96×10^3 s[/tex]

[tex]A_0 = 3.21x10^{17}[/tex] nuclei

t = 1.98×10^4 s

[tex]A=A_02^{-\frac{t}{\lambda}}[/tex]

[tex]A=(3.21×10^{17}\:\text{nuclei}) \left(2^{-\frac{1.98×10^4}{4.96×10^3}} \right)[/tex]

[tex]\:\:\:\:\:\:\:=2.01×10^{16}\:\text{nuclei}[/tex]

Let A be the position of the block at the top of the first incline; B its position at the bottom of the first incline; C its position at the bottom of the second incline; and D its position at the top of the second incline. I'll denote the energy of the block at a given point by E (point).

At point A, the block has total energy

E (A) = (10.0 kg) (9.80 m/s²) (7.00 m) + 1/2 (10.0 kg) v₀²

E (A) = 686 J + 1/2 (10.0 kg) v₀²

At point B, the block's potential energy is converted into kinetic energy, so that its total energy is

E (B) = 1/2 (10.0 kg) v₁²

The block then slides over the horizontal surface with constant speed v₁ until it reaches point C and slides up a maximum height of 26.0 m to point D. Its total energy at D is purely potential energy,

E (D) = (10.0 kg) (9.80 m/s²) (26.0 m) = 2548 J

Throughout this whole process, energy is conserved, so

E (A) = E (B) = E (C) = E (D)

(a) Solve for v₀ :

686 J + 1/2 (10.0 kg) v₀² = 2548 J

==>   v₀ ≈ 19.3 m/s

(b) Solve for v₁ :

1/2 (10.0 kg) v₁² = 2548 J

==>   v₁ ≈ 22.6 m/s

Now if the horizontal surface is not frictionless, kinetic friction will contribute some negative work to slow down the block between points C and D. Check the net forces acting on the block over this region:

• net horizontal force:

∑ F = -f = ma

• net vertical force:

∑ F = n - mg = 0

where f is the magnitude of kinetic friction, a is the block's acceleration, n is the mag. of the normal force, and mg is the block's weight. Solve for a :

n = mg = (10.0 kg) (9.80 m/s²) = 98.0 N

f = µn = 0.500 (98.0 N) = 49.0 N

==>   - (49.0 N) = (10.0 kg) a

==>   a = - 4.90 m/s²

The block decelerates uniformly over a distance 2.00 m and slows down to a speed v₂ such that

v₂² - v₁² = 2 (-4.90 m/s²) (2.00 m)

==>   v₂² = 490 m²/s²

and thus the block has total/kinetic energy

E (C) = 1/2 (10.0 kg) v₂² = 2450 J

(c) The block then slides a height h up the frictionless incline to D, where its kinetic energy is again converted to potential energy. With no friction, E (C) = E (D), so

2450 J = (10.0 kg) (9.80 m/s²) h

==>   h = 25.0 m

(d) At half the maximum height, the block has speed v₃ such that

2450 J = (10.0 kg) (9.80 m/s²) (h/2) + 1/2 (10.0 kg) v₃²

==>   v₃ ≈ 15.7 m/s

The block loses speed and thus energy as it moves between B and C, but its energy is conserved elsewhere. If we ignore the inclines and pretend that the block is sliding over a long horizontal surface, then its velocity v at time t is given by

v = v₁ + at = 22.6 m/s - (4.90 m/s²) t

The block comes to a rest when v = 0 :

0 = 22.6 m/s - (4.90 m/s²) t

==>   t ≈ 4.61 s

It covers a distance x after time t of

x = v₁t + 1/2 at ²

so when it comes to a complete stop, it will have moved a distance of

x = (22.6 m/s) (4.61 s) + 1/2 (-4.90 m/s²) (4.61 s)² = 52.0 m

(e) The block crosses the rough region

(52.0 m) / (2.00 m) = 26 times

Answer:

Test 1

1.True

2.True

3.True

4.False

5.True

6.True

7.False

8.True

9.True

10.True

yung iba nasa pic

Answer:

1568J

Explanation:

Since the problem states 80 m from the point of drop, the height relative to the ground will be 100-80=20m.

Use conservation of Energy

ΔUg+ΔKE=0

ΔUg= mgΔh=2*9.8*(20-100)=-1568J

ΔKE-1568J=0

ΔKE=1568J

since KEi= 0 since the object is at rest 100m up, the kinetic energy 20meters above the ground is 1568J

Answer:

KE = 2800 J

Explanation:

Usually a velocity is expressed as m/s. Then the energy units are joules.

[tex]\frac{108 km}{hr} * \frac{1000m}{1 km} * \frac{1 hour}{3600 seconds} =\frac{108*1000 m}{3600sec}[/tex]

v = 30 m / sec

KE = 1/2 * 4 * (30)^2

KE =2800 kg m^2/sec^2

KE = 2800 Joules

Answer:

(a) 8.57 x 10^8 Hz

(b) 23.3 cm

Explanation:

Wavelength = 35 cm = 0.35 m

speed =3 x10^8 m/s

Let the frequency is f.

(a) The relation is

speed  = frequency x wavelength

3 x 10^8 = 0.35 x f

f = 8.57 x 10^8 Hz

(b) refractive index of glass  is 1.5

The relation for the refractive index and the wavelength is

wavelength in glass= wavelength in air/ refractive index.

Wavelength in glass= 35/1.5 = 23.3 cm

Answer:

0.857 cm

Explanation:

We are given that:

The focal length for a convex lens to be (f) = 1.5cm

The object distance (u) = - 2.0 cm

We are to determine the image distance (v) = ??? cm

By applying the lens formula:

[tex]\dfrac{1}{f} = \dfrac{1}{u}+\dfrac{1}{v}[/tex]

By rearrangement and making (v) the subject of the above formula:

[tex]v = \dfrac{uf}{u-f}[/tex]

replacing the given values:

[tex]v = \dfrac{(-2.0)(1.5)}{(-2.0 -1.5)}[/tex]

[tex]v = \dfrac{-3.0}{(-3.5)}[/tex]

v = 0.857 cm

Answer:

Radio waves are used to carry satellite signals. These waves travel at 300,000 km/s (the speed of light). This means that a signal sent to a satellite 38,000 km away takes 0.13 s to reach the satellite and another 0.13 s for the return signal to be received back on Earth.

Explanation:

hope it help

Answer:

1.67 N

Explanation:

Applying,

F = u(dm/dt)+m(du/dt)................ Equation 1

Where F = force, m = mass of the vehicle, u = speed.

Since u is constant,

Therefore, du/dt = 0

F = u(dm/dt)............... Equation 2

From the question,

Given: u = 10 m/s, dm/dt = 10 kg/min = (10/60) kg/s

Substitute these values into equation 2

F = 10(10/60)

F = 100/60

F = 1.67 N

Answer:

45 × 8 units = A + B as formular

Explanation:

Given:

L = 0.02 H

C = [tex]2\:\mu \text{F}[/tex]

f = 200 Hz

The general form of the impedance Z is given by

[tex]Z = \sqrt{R^2 + (X_L - X_C)^2}[/tex]

Since this is a purely inductive/capacitive circuit, R = 0 so Z reduces to

[tex]Z = \sqrt{(X_L - X_C)^2} = \sqrt{\left(\omega L - \dfrac{1}{\omega C} \right)^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{\left(2 \pi L - \dfrac{1}{2 \pi f C} \right)^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{\left[2 \pi (200\:\text{Hz})(0.02\:\text{H}) - \dfrac{1}{2 \pi (200\:\text{Hz})(2×10^{-6}\:\text{F})} \right]^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{(25.13\:\text{ohms} - 397.89\:\text{ohms})^2}[/tex]

[tex]\:\:\:\:\:\:\:=372.66\:\text{ohms}[/tex]

Explanation:

For engine 1,

Energy removed = 239 J

Energy added = 567 J

[tex]\eta_1=\dfrac{239}{567}\cdot100=42.15\%[/tex]

For engine 2,

Energy removed = 457 J

Energy added = 789 J

[tex]\eta_2=\dfrac{457}{789}\cdot100=57.92\%[/tex]

For engine 3,

Energy removed = 422 J

Energy added = 1038 J

[tex]\eta_3=\dfrac{422}{1038}\cdot100=40.65\%[/tex]

So, the engine 2 has the highest thermal efficiency.

Answer:

Explanation:

From the given information:

mass = 64 kg

speed = 3.2 m/s

coefficient of friction [tex]\mu =[/tex] 0.70

The mechanical energy touted relates to the loss of energy in the system as a result of friction and this can be computed as:

[tex]W = \Delta K.E[/tex]

[tex]\implies \dfrac{1}{2}m(v^2 -u^2)[/tex]

[tex]= \dfrac{1}{2}(64.0 \kg) (0 - (3.2 \ m/s^2))[/tex]

Thus, the mechanical energy touted = 327.68 J

According to the formula used in calculating the frictional force

[tex]F_r = \mu mg[/tex]

= 0.70 × 64  kg× 9.8 m/s²

= 439.04 N

The distance covered now can be determined as follows:

d = W/F

d = 327.68 J/  439.04 N

d = 0.746 m

Answer:

v₂ = 53.23 m/s

Explanation:

Given that,

The mass of a golf club, m₁ = 158 g = 0.158 kg

The initial speed of a golf club, u₁  =  48.2 m/s

The mass of a golf ball, m₂ = 46 g = 0.046 kg

It was at rest, u₂ = 0

Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 32.7 m/s, v₁ = 32.7 m/s

We use the conservation of energy to find the speed of the golf ball just after impact as follows :

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\\v_2=\dfrac{m_1u_1-m_1v_1}{m_2}\\\\v_2=\dfrac{0.158(48.2)-0.158(32.7)}{0.046}\\\\=53.23\ m/s[/tex]

So, the speed of the golf ball just after the impact is equal to 53.23 m/s.