Two rams run toward each other. One ram has a mass of 44 kg and runs south with a speed of 6 m/s, while the other has a mass of 50 kg and runs north with a speed of 3 m/s. What will the momentum of the system made up of the two rams be after they collide? Assume the total momentum of the system is conserved.
A. 114 kg-m/s south
B. 414 kg-m/s south
C. 414 kg m/s north
D. 114 kg-m/s north

Answers

Answer 1
Answer = D. 114 kg-m/s north

Related Questions

Question 4(Multiple Choice Worth 3 points)
(03.02 MC)

Which statement best reflects a change in weather?

Today is cloudy, but tomorrow will be clear and sunny.
The average rainfall has decreased over the past five years.
Ocean temperatures are projected to increase over time.
Glaciers are melting more rapidly now than in the past 100 years.
plzzz helpppp asap

Answers

Answer:

a is your answer.............

write any two features of capital​

Answers

Capital has several important characteristics that are as follows:
Capital is a Passive Factor.
Capital is Man-Made.
Capital is not Indispensable.
Capital has high mobility.
Capital is Elastic.
Capital Depreciates.
Capital is Productive.
Capital is Temporary in Nature.

An egg is dropped onto a wood floor and breaks. When a different egg (same mass) is dropped the same distance onto a foam pad on the wood floor, it does not break. Why (in terms of physics) does this happen?
A. The pad extends the time so the impulse changes.
B. An egg requires a harder surface so it won’t break.
C. The pad pulls the egg to the floor.
D. Wood is harder than the pad.

Answers

Answer:

A.

Explanation:

The pad extends the time so the impulse changes.

Answer:

A. The pad extends the time so the impulse changes

Explanation:

in term of physics it has same mass:)

when is the mass of an object if it exerts a force of 160 N and an acceleration of 8.15m/s^2

Answers

Answer:

f=ma.......m=f/a......m=20kg

22) How is it possible to fill medicine in a syringe?explain​

Answers

Pressure is what makes syringes work.By sequentially pulling and pushing the plunger, the syringe can incorporate and release liquid or air.

I hope this helps you ^-^

The boiling point of water is 1000 C at sea level. The boiling point of butane is -1.50C… If we leave liquid butane in a bowl on a table in a room where the temperature is 240C, butane will

A. evaporate.
B. condense.
C. freeze.
D. melt.

Answers

Answer: If we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.

Explanation:

A temperature at which the the liquid and gaseous phase of a substance of a substance are present in equilibrium with each other is called boiling point.

For example, the boiling point of butane is -1.5 degree Celsius.

This means that at a temperature above -1.5 degree Celsius, butane will exist is gaseous state. That is, at a temperature of 24 degree Celsius butane will evaporate.

Thus, we can conclude that if we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.

Performance Task 2: "TAKE HOME TASK
1. It took scientist a long time to reconcile the dual nature of light, which led to the idea of the duality of matter. To further see an
evidence of this concept try to observe the smoke coming from a barbeque drill. From a distance, you will see a
wave flow of smoke going up.
Guide Questions:
a. Look closely into it, what do you see?
ha Does your observation tell something about the dual nature of matter? Why? Why not?
2. Observe the colors on the soap bubbles on the surface of water.
Guide Questions:
a. What do you see?
b. What property of light is exhibited?

Pasagot po huhu

Answers

I am dum sorry .........

An unbalanced 6.0-newton force acts eastward on an object for 3.0 seconds. The impulse
produced by the force is
18 N:s east
2 Nós east
18 N:s west
2 Nis west

Answers

c. 18 N:s West ksmxmak kxkammxj kan

2 What are(i) free fall , (ii) acceleration due to gravity, (iii) escape velocity , (iv) centripetal force?​

Answers

Answer:

Explanation:

1. Free fall implies an object falling under the gravitational influence only. During the flight, no other force acts on it except the gravitational pull.

2. Acceleration due to gravity is the earth's natural force of pull on all objects on its surface, close to its surface, or in the region where the force can be felt. This force pulls object to the surface of the earth.

3. Escape velocity is the required minimum velocity for an object to leave the gravitational influence of the earth. It has a constant value which can be determined by;

Escape velocity = [tex]\sqrt{2gR}[/tex]

where g is the gravitation force of the earth and R is the radius of the earth.

4. Centripetal force is the force of pull that is required to keep a rotation object in its curved path.

The gravitational force acting on various masses is measured on different planets. Measured values for the forces acting on the corresponding masses are shown in the data table. Analyze the data and develop a method for comparing the gravitational field strengths on the different planets. Use your method to compare the gravitational field strengths, and report your conclusions.

Answers

we Know that gravitational field strength(g) at a point on a planet is equal to gravitational force exerted per unit mass placed at that point.
It Means,
g=F/m
Here,
g=gravitational field strength
F=Gravitational force
m=Mass
Case A
planet force =10 and mass= .5
g1=F/m
g1=10/.5
=100/5
g1=20m/s
case B
F=30 and m=2
therefore g2=30/2
g2=15m/s^2
case C
F=45 and m=3
g3=45/3
=15m/s^2
case D
g4=60/6
g4=10m/s^2
from above results it is clear that the gravitational field strength of planet D is minimum which is 10m/s^2 and gravitational field strength of planet A is maximum which is 20m/s^2

what is electricity???????​

Answers

Explanation:

Electricity is defined as the rate of flow of charges in a conductor.

hope it helps.stay safe healthy and happy...

Answer:

Electricity is the presence and flow of electric charge. Using electricity we can transfer energy in ways that allow us to do simple chores . it's best - known form is the flow of electrons through conductor such as copper wires. The world "electricity " is sometimes used to mean "electrical energy "

Explanation:

hope it is helpful to you

[tex]kavya[/tex]

The summer camps had a field trip from the campus to Fragrance Hill. They traveled at an average speed of 65 km/h in the first 2 hours. After that, traveled at another average speed of 78 km/h. If the distance between the campus and Fragrance Hill is 364 km, what was the total time for the field trip?

Answers

Answer:

Explanation:

They traveled this distance in 2 parts, essentially. Part 1 had an average speed for a certain number of hours, part 2 had an average speed for a certain number of hours, and those 2 parts taken together took them a distance of 364 km. In equation form, that looks like this:

km/hr part 1 + km/hr part 2 = 364 km

Now we need to find each part on the left side of that equation. Part 1 first:

We traveled 65 km/hr for 2 hours, so that took us

[tex]65\frac{km}{hr}*2hr[/tex] and canceling out the hour label, we have that in part 1 we got

65(2) = 130 km. Good. Now onto the second part, where our unknown is.

We traveled 78 km/hr the second part for x hours, so that took us

[tex]78\frac{km}{hr}*xhr[/tex] and canceling out the hour label, we have that in part 2 we got

78x km. Now we can fill in the main equation (the one in bold print)

130 km + 78x km = 364 km and subtracting 130 km from both sides:

78x km = 234 km and dividing by 78 km:

x = 3 hours. Part 2 took 3 hours. Part 1 took 2 hours, so the whole trip took 5 hours.

. Una varilla de cobre de coeficiente de dilatación 1,4*10-5 °C -1 , tiene una longitud de 1.20 metros a una temperatura ambiente de 18 ˚C . ¿Cuál sera su longitud 100 ˚C

Answers

Answer:

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

Explanation:

Asumiendo que la varilla de cobre experimenta deformaciones muy pequeñas y que las deformaciones no longitudinales son despreciables con respecto a las deformaciones longitudinales, la deformación longitudinal de la varilla se estima mediante la siguiente fórmula:

[tex]l_{f} = l_{o}\cdot [1+\alpha \cdot (T_{f}-T_{o})][/tex] (1)

Donde:

[tex]l_{o}[/tex] - Longitud inicial de la varilla, en metros.

[tex]\alpha[/tex] - Coeficiente de dilatación, en [tex]^{\circ}C^{-1}[/tex].

[tex]T_{o}[/tex] - Temperatura inicial de la varilla, en grados Celsius.

[tex]T_{f}[/tex] - Temperatura final de la varilla, en grados Celsius.

Si sabemos que [tex]l_{o} = 1.20\,m[/tex], [tex]\alpha = 1.4\times 10^{-5}\,^{\circ}C^{-1}[/tex], [tex]T_{o} = 18\,^{\circ}C[/tex] y [tex]T_{f} = 100\,^{\circ}C[/tex], entonces la longitud final de la varilla es:

[tex]l_{f} = (1.20\,m)\cdot \left[1 + \left(1.4\times 10^{-5}\,^{\circ}C^{-1}\right)\cdot (100\,^{\circ}C-18\,^{\circ}C)\right][/tex]

[tex]l_{f} = 1.201\,m[/tex]

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

A cricket player lowers his hands while catching the ball. wny?​

Answers

because maybe the ball was going downwards or he was getting ready to catch the ball. one of those 2.

Which of the following describes a sound wave?
A. Longitudinal wave that does not require a medium
c
B. Longitudinal wave that requires a medium
C. Transverse wave that does not require a medium
D. Transverse wave that requires a medium

Answers

The correct answer is B, sound waves are longitudinal with a medium

Please help me with this...
And write all steps..​

Answers

Use this equation acceleration= final velocity-Initial velocity/ time taken

a=v-u/t

Hope this help

Answer:

[tex]2\frac{m}{s^2} =a[/tex]

Explanation:

Use the kinematic equation.

[tex]v_{2} =v_{1} +at[/tex]

This equation can be derived from [tex]f=ma[/tex], but we can just memorize, or look them up when needed as it saves us time.

Now we can plug our measurements into each variable to solve for acceleration.

[tex]18\frac{m}{s} =8\frac{m}{s} +a*5s[/tex]

Subtract 8m/s from both sides.

[tex]10\frac{m}{s} =a*5s[/tex]

Divide by 5 seconds. Left with acceleration in terms of [tex]\frac{m}{s^2}[/tex]

[tex]2\frac{m}{s^2} =a[/tex]

In a democracy how is rule of law regarded

Answers

Answer:

It is respected as leaders are accountable to the people. The rule of law within a democratic country will dictate what actions is considered wrong and punishable to do in that country. This will prevent people from harming and violating each other to get what they want and form a stable and safe society

Chỉ ra kết luận đúng trong các kết luận sau:



A.
Chỉ có các hạt mang điện tích dương chuyển động có hướng mới tạo ra dòng điện.

B.
Chỉ có các hạt mang điện tích âm chuyển động có hướng mới tạo ra dòng điện.

C.
Khi nguyên tử chuyển động có hướng thì xuất hiện dòng điện.

D.
Các dụng cụ điện sẽ hoạt động khi có dòng điện chạy qua.

Answers

it should be c! hope this helps

tìm chỉ số của A1 và A2

Answers

Answer:

A1

Explanation:

Which of the following measures does not help promote technological progress?


issuing a patent to a company that invents a new product


increased wages for researchers


training programs for workers


reducing the scale of the market for a new product

Answers

Answer:

reducing the scale of the market for a new product

Explanation:

A product can be defined as any physical object or material that typically satisfy and meets the demands, needs or wants of customers. Some examples of a product are mobile phones, television, microphone, microwave oven, bread, pencil, freezer, beverages, soft drinks, automobiles, motorcycles, etc.

The use of technology in the manufacturing of a new product can be effectively and efficiently promoted in the market by doing the following;

I. Issuing a patent to a company that invents a new product. Patent can be defined as the exclusive or sole right granted to an inventor by a sovereign authority such as a government, which enables him or her to manufacture, use, or sell an invention for a specific period of time.

Generally, patents are used on innovation for products that are manufactured through the application of various technologies.

II. Paying a higher amount of money as wages for researchers who are saddled with the responsibility of making finding about a product.

III. Creating a training programs that would help to improve on the knowledge and skills of workers.

However, reducing the scale of the market for a new product in comparison with other products and standards does not help promote technological progress.

HELPPPPPPPPPPP PLEASEEEEEEEEEEE

Complete this sentence. The solubility of a sample will ____________ when the size of the sample increases.


stay the same

decrease

increase

be unable to be determined

the answer is not decrease

Answers

The solubility of the sample will decrease

The moon is 250,000 miles away. How many feet is it from Earth? (dimensional analysis)

Answers

Answer:

1.261 billion

Explanation:The distance between the earth and the moon in miles is 250,000,so in feet,The distance is 1.261 billion

Which statement should he place in the region marked X?

Answers

Explanation:

The answer is Electrons move between objects.

Compared with dim light, what do light waves that look bright tend to have the subject just says science but the picker doesn't have that

Answers

Answer:

The brightness of a light depends on the amplitude of the light wave, which is the extent the waves moves from their equilibrium position. The brightness is also related to the amount of light that is emitted or reflected by an object

Therefore, compared to dim light, light that look bright have a higher amplitude and emit or reflect more light energy (photons)

Explanation:

57. A red ball (m= 10 kg) is moving at 3 m/s. A green ball (m = 8 kg) is moving at 3.5 m/s. Which ball has more
energy and by how much (2)

Answers

Answer:

the green ball has 4J more energy

Explanation:

The kinetic energy is given by the formula

K = 0.5 m v^2

the kinetic energy of the red ball:

K(red) = 0.5*10*3^2= 45J

of the green ball:

K(green)=0.5*8*3.5^2 = 49J

therefore the green ball has more energy by 4 Joules

What efforts are made to bring uniformity in measurement​

Answers

Answer: The use of S I Unit brings uniformity in measurements.

Explanation:

The S I unit is the international system of units which are used to express the magnitudes or quantities of important natural phenomena. It is used universally as a standard for measurements thereby creating an avenue for uniformity in measurements. The base units that makes up the SI unit are:

--> Length: this is measured in meters (m)

--> Time: this is measured in seconds (s)

--> Mass: this is measured in kilogram (kg)

--> Temperature: this is measured in Kelvin (k)

--> Electric current: this is measured in ampere (A).

--> Amount of substance: this is measured in mole

--> Luminous intensity: this is measured in candela (cd)

These units are used as the standard to make our judgement of measurement more reliable and accurate. And since there is only one basic unit for each quantity (example length which is measured in meters) there is no need for further conversions.

When an object is in a gravitational field, it has energy in its __________ __________ energy store.

Answers

Answer:

Gravitational potential

Explanation:

Any object that is not on the surface of the Earth, but at a height instead has potential energy. Eventually, this can become kinetic energy once the object falls.

When an object is in a gravitational field, it has energy in its gravitational potential energy store.

a uniform meter ruler is balanced at its midpoint

Answers

Answer:

a) i) x = 0.25 m, ii) x = 0.10 m, iii)  x = 0.050 m

b) i)  x = 0.40 m

Explanation:

a) For this exercise we use the rotational equilibrium equation, where we assume that the anticlockwise rotations are positive.

1) L = 2W  

we set our reference system in the center of the bar where the fulcrum is

              ∑τ = 0

              W 0.50 - L x = 0

              x = 0.50 W / L

we substitute the value

              x = 0.50 W / 2W

              x = 0.25 m

ii) L = 5W

we calculate

              x = 0.50 W / 5W

              x = 0.10 m

iii) L = 10 W

               x = 0.50 W / 10W

              x = 0.050 m

b) a new weight is placed at x₂ = 30 cm on the left side

              W 0.50 + W 0.30 - L x = 0

              x = (0.50 + 0.30) W / L

              x = 0.80 W / L

we calculate

i)  L = 2W

                x = 0.80 w / 2w

                x = 0.40 m

49. A block is pushed across a horizontal surface with a
coefficient of kinetic friction of 0.15 by applying a
150 N horizontal force.
(a) The block accelerates at the rate of 2.53 m/s2
Find the mass of the block.

(b) The block slides across a new surface while
experiencing the same applied force as before.
The block now moves with a constant speed.
What is the coefficient of kinetic friction between
the block and the new surface?

Answers

Answer:

(a) 37.5 kg

(b) 4

Explanation:

Force, F = 150 N

kinetic friction coefficient = 0.15

(a) acceleration, a = 2.53 m/s^2

According to the newton's second law

Net force = mass x acceleration

F - friction force = m a

150 - 0.15 x m g = m a

150 = m (2.53 + 0.15 x 9.8)

m = 37.5 kg

(b) As the block moves with the constant speed so the applied force becomes the friction force.

[tex]F = \mu m g \\\\150 = \mu\times 37.5\\\\\mu = 4[/tex]

The mass of a brick is 2kg. Find the mass of water displaced by it when it is completely immersed in water. (Density of the bricks is 2.5 g/cm^3)​

Answers

Answer:

2000g

Explanation:

volume=mass/density

=2000/2.5

=800cm³

mass=density×volume

=800×2.5

=2000g

Other Questions
How much more area does a large pizza with a 12 in. diameter have than a small pizza with an 8 in. diameter? Round your answer to the nearest square inch. Bluegill Company sells 14,000 units at $240 per unit. Fixed costs are $168,000, and operating income is $1,176,000. Determine the following: a. Variable cost per unit.b. Unit contribution margin.c. Contribution margin ratio. PLS HELP ASAP What are the possible rational zeros of f(x) = x4 + 2x3 3x2 4x 12? Artificial respiration is known as:A: rescue breathing B: home dialysis C: CPRD: aeronautics y you work from 7 a.m. to 4 p.m. The state you live in requires that you take a 30-minute break during any shift longer than 6 hours. This break does not count towards your hours. How many hours did you work today? Remember 30 minutes is equal .5 hours For the function G defined by G(x) = 5x + 3, find G(2) Please help have due very soon?thank you Prepara tu men para un da. Debes tomar en cuenta tres alimentos diferentes para cada comida (t los escoges, pero no los repitas) a) Pour le petit-djeuner je prends Je prends du caf, du pain, du croissant et des banana. b) Pour le djeuner je prends c) Pour le goter je prends d) Pour le dner je prends _ Which type of reactions usually happens slowest? 20 POINTS! The answer is x=4 and x= -5, how should I word it, saying how he is wrong? help me please I will mark as brainliest for the first correct answer A.Yes, since the slopes are the same and the y-intercepts are the same.B.No, since the y-intercepts are different.C.Yes, since the slopes are the same and the y-intercepts are different.D.No, since the slopes are different. what is valency of an atom? HELLLPPP 31 kilograms is the same as how many pounds? Hint: 1 kg = 2.2 lb Round your answer to the nearest tenth. how does modern erra differ from middle ages make a conversation between two people about the situation of odering a product on phone the perimeter The area of squre Plat is 100 m Find at the plot o a What was the Final Solution, and how was it developed? A four digit password is a number that begins with a 3. If digits can be repeated how many possible passwords are there? show and explain your work Question 4 of 10Which situation best illustrates the process of capital formation?O A. A farmer increases his profits by growing a variety of new crops.B. An artist buys bonds that will increase in value over time.C. An engineer tries to limit her spending during the week.O D. A factory worker takes out a high-interest loan to buy a new home.SUBMIT