Answer: The uses of static electricity include:
--> photocopying machines
--> precipitators
The dangers of static electricity include:
--> sparks that can lead to explosion
--> Damage to electronic equipment
Explanation:
STATIC electricity is defined as the imbalance that exists between a positive and a negative charge either within or outside an object. This is because all physical objects are made up of atoms which contains protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral. This shows that physical objects are made up of charges.
Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are BALANCED in an object, which makes that object neutral.
Applications( uses) of static electricity include:
--> photocopying machines: Inkjet photocopiers and printers use static electricity to guide a minute jet of ink to the page’s precise position.
--> precipitators: the static electricity is applied in an electrostatic precipitator whereby they remove smoke from waste gases before they pass out of the chimneys in power stations that burn fossil fuels.
The disadvantages (dangers) of static electricity include:
--> Sparks that can lead to explosion: sparks generated from static electricity can cause fires or explosions due to the ignition of flammable or explosive mixtures.
--> Damage to electronic equipment: this is due to components from electrostatic discharge.
1. Which of the following are good cross-training workouts for walking
Swimming
Biking
Basketball
All of the above
Answer:
All of the above is the answer
a box being pushed with a force of 85N right slides along the floor with a constant speed of 0.5m/s. What is the force of sliding friction on the box?
Answer:
[tex]85\; \rm N[/tex].
Explanation:
The box is sliding with a constant speed in a fixed direction (to the right.) In other words the velocity of this box is constant. Hence, this box would be in a translational equilibrium. The acceleration of this box would be zero.
By Newton's Second Law of motion, the net force on this box would be [tex]0[/tex]. In other words, forces on this box are balanced.
The question is asking for the size of the friction on the box. Assuming that the floor is horizontal. The friction on this box would also be horizontal,
The only other force that could balance that friction would be the [tex]85\; \rm N[/tex] push to the right. The direction of this push is horizontal (to the right.) Hence, the entirety of that [tex]85\; \rm N\![/tex] would be in the horizontal direction.
Thus, forces on this box in the horizontal direction would be:
The [tex]85\; \rm N[/tex] push to the right.Friction that opposes the rightward motion of the box (that is, to the left.)Since these two forces must balance each other, the size of the friction would also be [tex]85\; \rm N[/tex].
7) A ball is thrown upward at an initial velocity of 8.2 m/s, from a height of 1.8 meters above the ground. The height of the ball h, in metres can be represented, after t seconds, is modelled by the equation h = –4.8t² + 8.2t + 1.8. (a) Determine the height of the ball after 1.7 seconds.
Answer:
8392
Explanation:
d=s/t
If a force of 1250 N acts on an area of 25 metres squared, what will be the pressure acting on the surface? Show your working as well.
Answer: 50 Pa
Explanation:
Pressure = Force/Area
Pressure = N/m^2
Pressure = 1250/25
Pressure = 50
Pressure = 50 Pa
please click thanks and mark brainliest if you like :)
Answer:
50 pascal
Explanation:
Force=1250N
Area=25m^2 [ pressure=force/area]
P=F/A
1250/25=50
A motorcycle starts from rest and gains a velocity of 40m/s in 8 seconds. Find (i) acceleration and (ii) distance travelled by the motorcycle.
• Initial velocity (u) = 0 m/s
• Final velocity (v) = 40 m/s
• time (t) = 8s
Acceleration :[tex]\implies \sf a = \dfrac{\Delta v}{ t} \\ [/tex]
[tex]\implies \sf a = \dfrac{v - u}{ t} [/tex]
[tex]\implies \sf a = \dfrac{40 - 0}{ 8} [/tex]
[tex]\implies \sf a = \dfrac{40}{ 8} [/tex]
[tex]\implies \bf a = 5 \: {ms}^{ - 2} [/tex]
• Distance travelled by the motorcycle:[tex] \longrightarrow \sf {v}^{2} - {u}^{2} = 2as \\ [/tex]
[tex]\longrightarrow \sf {(40)}^{2} - {(0)}^{2} = 2 \times5 \times s \\ [/tex]
[tex] \longrightarrow \sf 1600 = 10s[/tex]
[tex]\longrightarrow \sf s = \dfrac{1600}{10} [/tex]
[tex]\longrightarrow \bf s = 160 \: m[/tex]
Write down the role played by four digestive juices in digestion and the
organs which secrete them.
Answer:
Explanation:Digestive juices secreted by various organs such as salivary glands in the mouth, stomach, liver and pancreas help in the process of digestion of food. Saliva secreted by the salivary glands in the mouth aids in the breakdown of starch present in the food to simple sugar
Which law states that absolute zero cannot be reached?
The Weight of an object is more at pole and less at equator of the earth. Give reason
The Weight of an object is more at pole and less at equator of the earth because the distance of the pole is less than the distance of the equator from the centre of the earth.
A object of mass 200kg is pushed from rest by a force of 500N along a horizontal plane for 5.0 seconds. Calculate the acceleration of the object
Answer:
force=mass×acceleration
hence
acceleration is given by force÷mass
(500÷200)*5=12.5
An object is thrown from the ground with an initial velocity of 30 m/s. What is the velocity at the point 25 m above the ground?
Answer:
It's a pretty simple suvat linear projectile motion question, using the following equation and plugging in your values it's a pretty trivial calculation.
V^2=U^2+2*a*x
V=0 (as it is at max height)
U=30ms^-1 (initial speed)
a=-g /-9.8ms^-2 (as it is moving against gravity)
x is the variable you want to calculate (height)
0=30^2+2*(-9.8)*x
x=-30^2/2*-9.8
x=45.92m
Answer:
35
Explanation:
dfddffffffffffffdddfr
Summary of set.........
Answer:
Set for what? did U finish the question?
A cricket ball of mass 800g has momentum of 20 kg m/sec . Calculate velocity of ball
Answer: 25 m/s
Explanation:
1. rearrange equation p = mv to find v
2. v = p/m - then convert 800 g into kg (= 0.8 kg)
3. plug in p and m - v = 20 / 0.8 = 25 m/s
Answer:
V= 25m/s
Explanation:
Mass=800g
Momentum=20kgm/s
V= ?
Convert 800g to kg
800/1000 = 0.8kg
Momentum=mass× Velocity
Momentum/Mass = Velocity
20/0.8 =25m/s
what do you mean by scattering of light
Answer:
Scattering of light is the phenomenon in which light rays get deviated from its straight path on striking an obstacle like dust or gas molecules, water vapours etc. Scattering of light gives rise to many spectacular phenomena such as Tyndall effect and the “red hues of sunrise and sunset”.
A and B are 0.200m apart in an electric field. If 800J of work are reuqired to move a 2.00 Columb charge from A to B, what is the electric field stregth?
Answer:
hello
Explanation:
hello dost timi kasto cha
The velocity ratio of a pulley system is 4. What does it means
Answer:
Velocity ratio = distance travelled by effort / distance travelled by load. Which is equal to effort arm / load arm. When velocity ratio (VR) is 4, the effort arm is greater than load arm.
please help urgent have you ever seen the old “Pull the tablecloth out from under the dishes” trick? Use Newton’s 1st Law to explain the following:
a. In this trick, are the dishes “objects in motion,” or “objects at rest?”
b. If the dishes end up staying on the table, was an UNBALANCED FORCE applied to them? How do you know?
Answer:
I kinda dont remember the 1st law so search it up on
and it should tell u , but if u need any help from the
Examples of a/an _______ observation are 37 m, 9.37 s, and 100 mph.
These are exaxmples of a quantitative observation.
Measuring is the expression of an observed quantity in a number with a relevant unit that can be compared with other values of the same quantity.
It is not limited to physical quantities, but extends to a quantitative description of the whole of reality. Measurements are usually quantitative observations, and their results are expressed in
numerical values, and unitsLearn more about quantitative observations in https://brainly.com/question/12042148.
Which of the following phenomena can be used to support the particle theory of light? Select all that apply.
The Photoelectric Effect
Polarization
Interference Patterns
Refraction
Reflection
A cyclist goes round a circular path of circumference 343 m in s. The angle made by him, with the vertical is
WITH STEPS PLZ
you need the number of seconds to calculate the distance. I'm assuming that the seconds were written in the question but you forgot to write the here, you can calculate the distance then and find the exact point where the cyclist stopped since you have the circumference. then you can find the angle (after finding the distance he cycled) by subtracting it from 360 since the circular path will have an angle of 360 degrees.
Although your question lacks some data A general answer is provided :
The angle made vertically = 360° - x°
where x = angle at which the the cyclist stopped
and circumference of the circular path = Total Distance travelled by the cyclist
First step : determine the distance travelled by the cyclist vertically
circumference = 2*π*r
343 = 2*π * r
∴ r = 343 / ( 2π ) = 54.59
therefore distance travelled by the cyclist vertically = 54.59 * 2 = 109.18 m
Given that the time travelled is missing
assuming the angle to the distance travelled by the cyclist before it stopped vertically = 360° - x°
This is because the Total angle of a circular path = 360°
Learn more about circular paths : https://brainly.com/question/24210487
một oto đang chạy với vận tốc là 10m/s thì tăng tốc và chuyển động nhanh dần đều sau 20s thì đạt vận tốc 14m/s
a) tính gia tốc của xe
b) tính vận tốc xe sau 40s kể từ khi tăng tốc và quãng đường xe đi được trong thời gian đó
a) gia tốc = vf-vi / t
a = 14-10 / 20
a = 0,2ms⁻²
b) dưới dạng a = Δv / t
v = lúc
v = 0,2 × 40
v = 8ms⁻¹
như v = d / t
do đó d = vt
d = 8 × 40
d = 320m
hãy đánh dấu là trí óc nhất
what does a resistor in an electrical dp
Answer:
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
Explanation:
Resistors are common elements of electrical networks and electronic circuits and are ubiquitous in electronic equipment. Practical resistors as discrete components can be composed of various compounds and forms. Resistors are also implemented within integrated circuits.
The electrical function of a resistor is specified by its resistance: common commercial resistors are manufactured over a range of more than nine orders of magnitude. The nominal value of the resistance falls within the manufacturing tolerance, indicated on the component.
A glass rod acquires charge by rubbing silk cloth. The charge on the glass is due to:
(a) Friction
(b) Conduction
(c) Induction
(d) Radiation
Answer:
(a)Friction
Explanation:
It is due to friction as you are rubbing the glass rod with silk cloth
as friction occurs when 2 surfaces are rubbed against each other
Therefore it is charging by friction
How effectiveness of a small force is increased when action area of force is
reduced?
Answer:
The force is proportional to the area, for if we increase the area but keep the number of molecules per cubic centimeter the same, we increase the number of collisions with the piston in the same proportion as the area was increased.
Explanation:
more area =more space = more free for molecules = less pressure = less force.
The spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum. have wavelengths that are longer than normal. have a higher intensity in the red part of the spectrum. have wavelengths that are shorter than normal.
have a higher intensity in the red part of the spectrum
Because of the Doppler effect, the spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum
Most galaxies' spectra have been redshifted, which means that their spectral lines are now pushed away from their normal or rest wavelengths and towards longer wavelengths. When an object travels away from an observer, the Doppler effect causes the shift phenomenon.
The Big Bang hypothesis and the concept of the expanding universe, show that galaxies are moving away from us, observed from the redshift lines.
The waves' apparent wavelengths shift as a result, changing the color of light waves or the pitch of sound waves.
Hence, because of the Doppler effect, the spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum.
To learn more about the Doppler effect, here:
https://brainly.com/question/28106478
#SPJ6
If the N pole of a magnet is brought near to an unmagnetized iron, nail, then the nail becomes
Answer:
The nail also magnatized .
what is Newton's first law of motion?
EXPLAIN WITH SOME EXAMPLES
Answer:
The tendency of undisturbed objects to stay at rest or to keep moving with the same velocity is called inertia. This is why, the first law of motion is also known as the law of inertia.
Example.: A ball at rest on the ground continues to be at rest unless someone kicks it or any external force acts on it.
Explanation:
I hope this will help you buddy
can someone pls help me calculate this?
Answer:
10N is the answerrrerreer
Answer:
f= 100N
Explanation: F=m×(v₀-vf/t)
=0.05ₓ(200-0/0.1)
=0.05ₓ2000
=100N
please mark as brainliest
an electron is moving at 3.6 x 10^3 m/s. a photon with what wavelength would have the same momentum????
Answer:
The wavelength of the photon that would have the same momentum as the electron is 202.2180996 nm
Explanation:
The velocity of the electron, v = 3.6 × 10³ m/s
The momentum of an electron, [tex]p_e[/tex] = m × v
Where;
v = The mass of the electron = 9.109 × 10⁻³¹ kg
∴ [tex]p_e[/tex] = 9.109 × 10⁻³¹ kg × 3.6 × 10³ m/s = 3.27924 × 10⁻²⁷ kg·m/s
According to the de Broglie equation, the momentum of a photon, p, is given as follows;
p = h/λ
Where;
h = 6.63 × 10⁻³⁴ J·s
λ = The wavelength of the photon
∴ λ = h/p
According to the question, we have;
p = [tex]p_e[/tex] = 3.27924 × 10⁻²⁷ kg·m/s
∴ λ = 6.63 × 10⁻³⁴ J·s/(3.27924 × 10⁻²⁷ kg·m/s) = 2.02180993 × 10⁻⁷ m
The wavelength of the photon, λ = 2.02180993 × 10⁻⁷ m = 202.2180993 × 10⁻⁹ m = 202.2180993 nm.
Suppose that people living near a particular​ high-voltage power line have a higher incidence of cancer than people living farther from the power line. Can you conclude that the​ high-voltage power line is the cause of the elevated cancer​ rate? If​ not, what other explanations might there be for​ it? What other types of research would you like to see before you conclude that​ high-voltage power lines cause​ cancer?
Complete Question
Complete Question is attached below
Answer:
a)Option B
b)Option B
Explanation:
a)
Without any confirmation it will be utterly wrong to conclude that high power voltage is the reason for the elevated cancer cases
Therefore
Option B
b)
The High Concentration of cells volume in a part of the Body is what causes Cancer
Therefore
Option B
Numerical Problems:
a. A man runs 1200 m on a straight line in 4 minutes. Find his velocity.
can anyone tell me with process
[tex]\boxed{\sf Velocity=\dfrac{Displacement}{Time}}[/tex]
[tex]\\ \sf\longmapsto Velocity=\dfrac{1200}{240}[/tex]
[tex]\\ \sf\longmapsto Velocity=5m/s[/tex]