Explanation:
The first wave was found to have a wavelength of 3 x 10⁵ m and the second wave had a wavelength of 3 x 10⁴ m
We need to find which wave have a higher frequency.
The relation between frequency and wavelength is given by :
[tex]c=f\lambda[/tex]
Let f₁ and f₂ be the frequency of wave 1 and wave 2.
[tex]f_1=\dfrac{c}{\lambda_1}\\\\f_1=\dfrac{3\times 10^8}{3\times 10^5}\\\\=1000\ Hz[/tex]
And
[tex]f_2=\dfrac{c}{\lambda_2}\\\\f_2=\dfrac{3\times 10^8}{3\times 10^4}\\\\=10000\ Hz[/tex]
Hence, the wave having less wavelength will have higher frequency. The wave having wavelength 3 x 10⁴ m will have higher frequency.
How many elements are in NaC2H302?
Each of the structures for CIOCI, NCOH, and CINO has atoms connected in the order given in their formulas. Identify the type of hybridization for the central atom in each compound. Write the appropriate items to their respective bins.
a. nitrogen in CINO
b. oxygen in CIOCI
c. carbon in NCOH
1. sp
2 sp2
3. sp3
Answer:
see explanation
Explanation:
If we look at the structures of each of the compounds we can be able to deduce the accurate hybridization of each of the atoms listed.
Looking at ClNO - we can see that the nitrogen atom is linked to oxygen by a double bond and linked to chlorine by a single bond retaining a lone pair on nitrogen. Hence the nitrogen is in sp2 hybridized state.
For ClOCl, the compound has a sp3 hybridized oxygen atom linked to two chlorine atoms as expected retaining two lone pairs on oxygen.
For NCOH, the carbon atom is doubly bonded to oxygen hence it is sp2 hybridized.
Answer:
A) Label 2 (Sp2)
B) Label 3 (Sp3)
C) Label 1 (Sp)
Explanation:
A) Have 7 Lone Pairs (LP) to place. 1 on N. 1 becomes a double bond. Double bonds count as 1 Electron Group. Same for single bond and LP. Add these to get 3. 3 coresponds for SP2
B) 8LP. 2LP on O. 2 bonds to O. Add to get 4. 4-> Sp3
C) 5LP. C O bond is double. single bond to N. Add to get 2-> Sp
Chlorine monoxide accumulates in the stratosphere above Antarctica each winter and plays a key role in the formation of the ozone hole above the South Pole each spring. Eventually, ClO decomposes according to the equation:
The question is incomplete, the complete question is;
Chlorine monoxide accumulates in the stratosphere above Antarctica each winter 3nd plays a key role the formation of the ozone hole above the South Pole each spring Eventually. CIO decomposes acco to the equation: 2CIO(g) rightarrow CL2(g) + O2(g) The second-order rate constant for the decomposition of CIO is 6950000000 M-1 s-1 at a particular temperature Determine the half-life of CIO when its initial concentration is .0000000185 M
Answer:
7.8 * 10^-3 s
Explanation:
Given that the half life of a second order reaction is obtained from the formula;
t1/2 = k-1[A]o-1
t1/2 = 1/k[A]o
second order rate constant (k) = 6950000000 M-1 s-1
initial concentration ([A]o) =0.0000000185 M
t1/2 = 1/6950000000 * 0.0000000185
t1/2 = 7.8 * 10^-3 s
What is the total number of moles of oxygen atoms present in one mole of Mg(CIO3)2?
1. 5
2. 2
3. 3
4. 6
Answer:
Of oxygen would be 6 moles (4).
Explanation:
Since it is in a bracket you have to multiply 3 and tge 2 to get 6 oxygens.
How much water would need to be added to 1092 mL of a 54.7 M NaCl solution to make a 0.25 M solution?
Answer:
237.8L of water would need to be added.
Explanation:
The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).
Then figure out what information you have and what is being found. In this case:
M1 = 54.7 M
V1 = 1092 mL = 1.092 L
M2 = 0.25 M
V2 = unknown
Then solve the equation for whatever you are trying to find.
M1V1=M2V2
V2=M1V1/M2
Now you need to plug everything in.
V2=(54.7M*1.091L)/0.25M
V2=238.93L
That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.
238.93L - 1.091L = 237.8L
Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.
I hope this helps. Let me know if anything is unclear.
What is the mass of 8.8 x 10^22 of magnesium
Answer:
0.05
moles
Explanation:
In a mole of any substance, there exist
6.02⋅1023
units of that substance.
So here, we got:
3.01⋅1022Mg atoms⋅1mol6.02⋅1023M gatoms=0.05mol
NEED HELP ASAP!!
(04.04 LC)
Which statement is true about the products of cellular respiration?
They contain oxygen.
They contain glucose.
They become the products of photosynthesis.
They become the reactants of photosynthesis.
Answer:
They contain oxygen
hope it helps
Name the alkyne please help!!
Answer:
4-ethylhex-2-yne
Explanation:
Fe + CuCl2 → FeCl2 + Cu
The type of reaction represented by the above equation is -
decomposition
synthesis
single-replacement
double-replacement
Answer:
the type is single replacement
The given reaction equation represents a single-replacement reaction.
Explanation:
A chemical reaction is defined as the rearrangement of the atoms of a substance to give a new substance as a product.A decomposition reaction is a type of chemical reaction in which a substance breakdowns into two or more than two simpler substances.ABC→ A+B+C
A synthesis reaction is a chemical reaction in which two or more compounds are combined together to form a single compound.A+B+C → ABC
A single-replacement reaction is defined as the chemical reaction in which an element replaces another element from its compound.AB+ C → AC + B
A double-replacement reaction is defined as the chemical reaction in which ions of compounds are exchanged.AB+ CD → AC + BD
Given:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
To find:
The type of chemical reaction represented by the given equation.
Solution:
In the given reaction:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
Iron is replacing copper from its compound which is copper(II) chloride to give iron(II) chloride and copper as a product.
So from this, we can conclude that the given reaction equation represents a single-replacement reaction.
Learn more about types of chemical reactions here:
brainly.com/question/1071297?referrer=searchResults
brainly.com/question/12844777?referrer=searchResults
.What does the changing the Aperture do when taking a photo? *
4.What effect can you get from using a slow shutter speed? *
5.What effect can you create by using a quick shutter speed?
Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
which formula represents a nonpolar molecule containing polar covelant bond
Answer: H2O and NH3 are polar molecules. H2 is a nonpolar molecule but the H-H bond is also nonpolar.
Therefore, the best choice is CCl4. Although the C-Cl bond is polar due to electronegativity differences, the molecule itself is nonpolar because the net dipole moments cancel out, given its tetrahedral molecular structure.
Explanation:
Write the balanced chemical equation between H2SO4 and KOH in aqueous solution. This is called a neutralization reaction and will produce whater and potassium sulfate. Phases are optional.
0.650 L of 0.430 M H2SO4 is mixed with 0.600 L of 0.240 M KOH. What concentration of sulfuric acid remains after neutralization?
Answer:
0.166M
Explanation:
In a neutralization, the acid, H₂SO₄, reacts with a base, KOH, to produce a salt, K₂SO₄ and water. The reaction is:
H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O
To solve this problem, we need to determine moles of H2SO4 and moles of KOH that reacts to find the moles of sulfuric acid that remains after the reaction:
Moles H2SO4:
0.650L * (0.430mol /L) = 0.2795moles H2SO4
Moles KOH:
0.600L * (0.240mol / L) = 0.144 moles KOH
Moles of sulfuric acid that reacts with 0.144 moles of KOH are:
0.144 moles KOH * (1mol H2SO4 / 2 mol KOH) = 0.072 moles of H2SO4 react.
And remain:
0.2795moles H2SO4 - 0.072moles H2SO4 = 0.2075 moles of H2SO4 reamains.
In 0.650L + 0.600L = 1.25L:
Molar concentration of sulfuric acid:
0.2075 moles of H2SO4 / 1.25L =
0.166MWhat is an nucleus ?
Nucleus is present at the centre of atom. It contains protons and neutrons. It is very small as compared to the atom.
Answer:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
Explanation:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
what is meant by the term quantitative?
A) number measurement
B) words & explanation
Answer:
a) number measurement
Explanation:
relating to, measuring, or measured by the quantity of something rather than its quality.
Answer:
number and measurement
Explanation:
Quantitative is an adjective that simply means something that can be measured. For example, we can count the number of sheep on a farm or measure the gallons of milk produced by a cow.
what coefficients used to balance chemical equation below? ___ Ag2O ----> ____ Ag + ___ O2
A 2,4,1
B 2,2,2
C 2,1,2
D 1,1,1
The coefficients used to balance the chemical equation given in the question are 2, 4, 1 (Option A)
What is a chemical equation?Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.
The reactants are located on the left side while the products are located on the right side.
Reactants —> Products
The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
How to balance the equationAg₂O —> Ag + O₂
There are 2 atoms of O on the right side 1 on the left. It can be balance by writing 2 before Ag₂O as shown below
2Ag₂O —> Ag + O₂
There are 4 atoms of Ag on the left side and 1 atom on the right side. It can be balance by writing 4 before Ag as shown below
2Ag₂O —> 4Ag + O₂
Now, the equation is balanced.
Thus, the coefficients are: 2, 4, 1
Learn more about chemical equation:
https://brainly.com/question/7181548
#SPJ2
Which best describes a difference between energy transformation in power plants and dams?
Answer:
Which best describes a difference between energy transformations in power plants and dams? Only power plants use fossil fuels to transform energy. Only dams use fission to generate thermal energy. ... Only dams use mechanical energy to produce electricity.
Explanation:
HOPE THIS HELP
PICK ME AS THE BRAINLIEST
Which of the following observations would be the expected indication that a reaction has taken place when a solution of cesium sulfate is mixed with strontium perchlorate.
Bubbling
Formation of percipitate
Formation of soluble salts
Formation of a gas
Answer:
Formation of precipitate
Formation of soluble salts
Explanation:
Let's consider the molecular equation that takes place when an aqueous solution of cesium sulfate is mixed with an aqueous solution strontium perchlorate.
Cs₂SO₄(aq) + Sr(ClO₄)₂(aq) ⇒ 2 CsClO₄(aq) + SrSO₄(s)
According to the solubility rules:
CsClO₄ is a soluble salt.SrSO₄ is an insoluble salt that precipitates as a solid.For a double displacement reaction to occur, at least one of the products must be insoluble or volatile.
Answer:
It's b) Formation of a precipitate
Explanation:
I took the quiz and got it right.
which description of salt is a chemical property?
1. white cube crystals
2.odorless
3.product of mixing acids and bases
4. solid does not conduct electricity
Pls answer quickly
When circumstances are right, most materials undergo a process called thermal expansion. Which statement best describes the cause and effect of thermal expansion? Group of answer choices Matter is heated, and its particles spread out more. Matter is heated, and its particles move closer together. Matter is cooled, and its particles move closer together. Matter is cooled, and its particles spread out more.
Answer: Matter is heated, and its particles spread out more
Explanation:
Thermal expansion occurs when there's an expansion of an object or material or when an object becomes bigger because of a rise in its temperature. This brings about the faster movement of the heated molecules and the atoms spreading out.
Therefore, the cause and effect of thermal expansion will be that when matter is heated, and its particles spread out more.
11.
A sample of TNT, C-H5N306, has 7.30 1021 nitrogen atoms. Determine the numbers of
hydrogen atoms in this sample of TNT.
021
Answer:
1.22 × 10^22 H atoms
Explanation:
From this question, TNT has the chemical formula: C-H5N306. The number of nitrogen atoms in the TNT substance is said to be 7.30 × 10^21 atoms.
The number of hydrogen atoms in the same TNT substance can be got using mole ratio. Based on the chemical formula, the mole ratio of hydrogen to nitrogen is 5:3 i.e. H5N3.
This means that;
Number of atoms of hydrogen = 5/3 of the number of atoms of nitrogen.
Hence, number of H atoms = 5/3 × 7.30 × 10^21
number of H atoms = (7.30 × 5/3) × 10^21
number of H atoms = (36.5/3) × 10^21
number of H atoms = 12.1666 × 10^21
number of H atoms = 1.2166 × 10^22 atoms.
Approximately, number of H atoms in TNT is 1.22 × 10^22 atoms.
7. A. How many moles of Calcium hydroxide (CaOH2) are needed to completely react with 14.5 mol of Phosphoric acid (H3PO4)?
2 H3PO4 + 3 Ca(OH)2 → 6 H(OH) + Ca3(PO4)2
a. How many moles of water (HOH) will be produced?
b. How many moles of Calcium Phosphate (CaOH2) will be produced?
Answer:
moles of calcium hydroxide= 21.75 mol
a) 43.5 mol
b) 7.25 mol
Explanation:
Please see the attached picture for the full solution.
Please help with this question..thank you
A 0.98 gram sample of a volatile liquid was heated to 348 k. the gas occupied 265 ml of space at a pressure of 0.95 atm. what is the molecular weight of this gas?
Answer:
The molecular weight is [tex]Z = 111.2 \ g/mol[/tex]
Explanation:
From the question we are told that
The mass of the sample is [tex]m = 0.98 \ g[/tex]
The temperature is [tex]T = 348 K[/tex]
The volume which the gas occupied is [tex]V = 265 \ ml = 265 *10^{-3} L[/tex]
The pressure is [tex]P = 0.95 \ atm[/tex]
Generally from the ideal gas equation we have that
[tex]PV = n RT[/tex]
Here n is the number of moles of the gas while the R is the gas constant with value [tex]R = 0.0821 \ atm \cdot L \cdot mol^{-1} \cdot K^{-1}[/tex]
[tex]n = \frac{PV}{ RT}[/tex]
=> [tex]n = \frac{ 0.95 * 265 *10^{-3} }{ 0.0821 * 348}[/tex]
=> [tex]n = 0.00881 \ mol[/tex]
Generally the molecular weight is mathematically represented as
[tex]Z = \frac{m}{n}[/tex]
=> [tex]Z = \frac{0.98 }{0.00881}[/tex]
=> [tex]Z = 111.2 \ g/mol[/tex]
What else is produced when sodium carbonate decomposes?
Na2CO3 → Na2O + _________
Answer:
CO2
Explanation:
Which is a component of John Dalton’s atomic theory?
The ratio of atoms in a compound is fixed.
The atoms of different elements are the same.
An atom is a small particle of matter that can be broken down.
A reaction can create or destroy atoms as well as rearrange them.
Answer:
i think the answer is b
Explanation:
what's element on the periodic table has the symbol w
Answer:
W is tungsten on the periodic table
Four students rolled a ball down a slide on the play ground which ball has the greatest applied force
What is the atomic radius
Answer:
The atomic radius of a chemical element is a measure of the size of its atoms, usually the mean or typical distance from the center of the nucleus to the boundary of the surrounding shells of electrons.
What is the systematic name of the following compound?
KBr
Choose 1 answer:
Krypton bromide
Krypton(1) bromide
Potassium(1) bromide
Potassium bromide
Answer: D. Potassium bromide
How do Earth’s plates able to move?
Answer:
Plates at our planet's surface move because of the intense heat in the Earth's core
Explanation:
Hopefully this helps, I believe in you! ^^
Answer/Explanation:
movement can be cause by the intense heat in the earth's core, which causes molten rock in the mantle layer to move. it moves in a pattern called 'convection cell' which can form when the warm material rises, then cools, and eventually sink down. then the process repeats (cooled, warms up and rises.. etc..)
I hope this was what you were kinda looking for:) - T
PS. HAVE A GOOD DAY! I LIKEYOUR PROFILE HAFHAS
