Types of energy transformation​

Answer:

Professional education as a science has been defined as a field of educational science that studies the growth of a person into a profession and the related problems. It refers to organized education aimed at the knowledge and skills needed in the profession and working life, as well as growing into active citizenship and membership of society. Professional education as a discipline studies vocational training, skills and learning related to the profession and working life.  

It enables young people and adults to pursue goal-oriented learning with the aim of acquiring and developing the necessary skills in the profession and creating the conditions for independent professional activity and continuous development in the profession.

Answer:

Current, I = 20 Amperes.

Explanation:

Given the following data;

Voltage = 40 V

Resistance = 2 Ohms

To find current flowing through the resistor;

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

[tex] V = IR[/tex]

Where;

V represents voltage measured in voltage.

I represents current measured in amperes.

R represents resistance measured in ohms.

Making current (I) the subject of formula, we have;

[tex] I = \frac {V}{R} [/tex]

Substituting into the formula, we have;

[tex] I = \frac {40}{2} [/tex]

Current, I = 20 Amperes.

Answer:

B

Explanation:

galvanometer has a small resistance ....

I dont know whether the answer is right...

Answer:

According to the principle of the Conservation of Energy, energy can neither be destroyed or created, energy can be transformed from form to another

The forms of energy the car has at the different stages is given by virtue of either the position of the car, which is the car's potential energy, or the speed of the car, which gives the potential energy of the car

However, due to the frictional forces acting on the car, there is a frictional force which requires work to be done for the car to move between points in the roller coaster

Therefore, based on the Conservation of Energy principle, we have;

The total energy of the roller coaster, M.E. = m·g·[tex]h_{max}[/tex]

Where;

m = The mass of the roller coaster = 4,500 kg

g = The acceleration due to gravity ≈ 9.81 m/s²

[tex]h_{max}[/tex] = The maximum height = 30 m

Therefore, M.E.[tex]_A[/tex] = 4,500 × 9.81 × 30 = 1,324,350 J

The energy at point B, [tex]M.E._B[/tex] = 4,500×15×9.81 + (1/2) ×4,500×17.15² = 1,323,950.625

The energy at point B, [tex]M.E._B[/tex] = 1,323,950.625 J

At point C, the total energy, [tex]M.E._C[/tex] = (1/2)·m·v²

Where;

v = The velocity of the roller coaster at point c = 24.25 m/s

Therefore;

[tex]M.E._C[/tex] = (1/2) × 4,500 × 24.25² = 1,323,140.625

At point C, the total energy, [tex]M.E._C[/tex] = 1,323,140.625 J

Therefore, given that the energy at point A, M.E.[tex]_A[/tex] is larger than the energy at point B, [tex]M.E._B[/tex], is larger than the energy at point C, [tex]M.E._C[/tex], the loss in energy can be explained by the presence of the friction which require energy for movement of the roller coaster between the points

Explanation:

Answer:

When the metal wire in an incandescent lightbulb glows when the light is switched on and stops glowing when it is switched off, this is an example of resistance, which provides light and heat.  

Explanation:

Opening or closing a circuit.

Answer:

52 minutes

Explanation:

Given the following data;

Voltage = 1.5 V

Current = 2 Amperes

Energy = 9360 J

To find how many minutes will the battery last before it runs out of energy;

First of all, we would determine the power rating of the toy

Power = current * time

Power = 2 * 1.5

Power = 3 Watts

Next, we find the time;

Energy = power * time

9360 = 3 * time

Time = 9360/3

Time = 3120 seconds

To convert to minutes;

60 seconds = 1 minute

3120 seconds = 3120/60 = 52 minutes

Answer:

i) acceleration from B to D is 0, because the velocity is constant (stays the same)

ii) whatever units of distathat might be, we can calculate the number:

for 4 time-steps (2 to 6) the velocity is 6 per time step, that makes 24 distance units in these 4 time steps. it's the same the area underneath the graph.

there is also the vertical line from 0 to 2. we can calculate that distance like the area of a triangle with 2*6 / 2 = 6

the total distance from 0 to D is therefore 30

Answer:

35 m

Explanation:

Given :

The distance of the path from the ground to the tree limb = 50 m

The angle between the path of flight of the bird towards the tree limb and the ground = 45 degrees

Therefore we can determine the height above which the bird perched above the ground by using the rules of the trigonometric ratios as;

We know that ,

[tex]$\sin 45^\circ =\frac{\text{perpendicular}}{\text{hypothenus}}$[/tex]

[tex]$\sin 45^\circ =\frac{\text{BC}}{\text{AC}}$[/tex]

[tex]$0.7 =\frac{\text{BC}}{\text{50}}$[/tex]

[tex]\text{BC }= 0.7 \times 50[/tex]

       = 35

Therefore, the bird perched on the tree limb at a height of 35 m.

Answer:

tthe body of what it is supplied in its temperature rises

Answer:

72 N

Explanation:

Applying,

F = (m'+m)a..................... Equation 1

Where F = Force, m' = First mass, m = second mass, a = acceleration.

From the question,

m' = 2 kg, m = 4 kg, a = 12 m/s²

Substitute these values into equation 1

F = 12(2+4)

F = 12×6

F = 72 N

Answer:

it would melt with the hot weather

Explanation:

It melts and the water changes color

Answer:

SO

Explanation:

SI

Answer:

Explanation:

dynamic equilibrium

Answer:

the answer is  tree

Explanation:

because tree is made up of woodly barks and not atoms so we can say that tree is the answer. u may wander, why not hear or baloon cause heat is a gas state which is made up of atom and baloon contains gall like helium which is also made up of atom.

hope this helps u

The correct answer is Option (A) Single replacement.

What is Single replacement Reaction?

(B) Combustion is a type of chemical reaction in which a compound and an oxidant is reacted to produce heat and a new product.

(C) Synthesis is the production of chemical compounds by reaction from simpler materials.

(D)A double replacement reaction is a type of chemical reaction where two reactants exchange ions to form two new products with the same type of chemical bonds.

Hence Other options are incorrect and (A) is the correct one

Learn more about single replacement reaction here

https://brainly.com/question/20216315

#SPJ2

Answer: single replacement

Explanation:

Answer:

The weight of the person decreases.

Explanation:

Weight of person at sea level = 700 N

height = 10000m

We know that the weight is given by product of mass and the acceleration due to gravity.

The acceleration due to gravity at height is given by

[tex]g' =g\times \left ( \frac{R}{R+h} \right )^2[/tex]

Where, R is the radius of earth and h is the height.

Now, as we go on heights , the acceleration due to gravity decreases, so the weight also decreases as we go on heights.

Answer:

5m/sec^2

Explanation:

Distance=1200m

Time=4 min

1=60sec

4=4 x 60

=240sec

Velocity=Distance/Time

Velocity=1200/240

Velocity=5m/sec^2

Mark me as brainliest

Answer:

• Go Native. Use native plants in your landscape. ...

• Reduce Chemical Use. Use fewer chemicals around your home and yard, and make sure to dispose of them properly - don't dump them on the ground!

• Manage Waste. ...

Explanation:

There are some easy ways to conserve water to help protect our aquifers, watersheds, and ground water. First, we can all conserve water, by not running the water while we brush our teeth and making sure we fix all leaking or dripping faucets. Another was to conserve water is to collect rain water to use to water your plants. Speaking of plants, you can also plant more zeroscape type landscapes that require less water. We can also update our shower heads and toilets to be low-flow and more efficient. Can't afford a new toilet? Simply add a brick to your tank and this will cut down on the water used for every flush.

Answer:

1200000 J

Explanation:

Applying,

W = Fdcos∅....................... Equation 1

Where W = Workdone, F = Force applied to pull the wagon, d = distance, ∅ = angle with the horizontal.

From the question,

Given: F = 2000 N, d = 0.75 miles = (0.75×1600) = 1200 m, ∅ = 60°

Substitute these values into equation 1

W = 2000×1200×cos60°

W = 2000×1200×0.5

W = 1200000 J

Hence the work done in pulling the wagon is 1200000 J

Answer:

Efficiency can be increase by using rollers in conjunction with the inclined plane. Wedge. The wedge is an adaptation of the inclined plane. It can be used to raise a heavy load over a short distance or to split a log

Answer:

How big the city because it could be a big all city

Answer:

Explanation:

PE = mgh where m is mass, g is the pull of gravity, and h is the height to which the object can possibly fall.

PE = 3.0(-9.8)(-12.4) so

PE = 360 J, rounded to the correct number of sig figs.

The gravitational potential energy of the rock is 362.4 joules.

The gravitational potential energy of an object is given by the formula:

PE = mgh

where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity (which is approximately 9.81 m/s^2 near the surface of the Earth), and h is the height of the object above a reference point.

In this case, the mass of the rock is 3.0 kg, the height above the ground is 12.4 m, and the acceleration due to gravity is 9.81 m/s^2. Substituting these values into the formula, we get:

PE = (3.0 kg) x (9.81 m/s^2) x (12.4 m) = 362.4 J

Therefore, the gravitational potential energy of the rock is 362.4 joules.

To learn about universal gravitation constant click:

https://brainly.com/question/858421

#SPJ3

Answer:

Explanation:

The frequency equation is

[tex]f=\frac{v}{\lambda}[/tex] where f is frequency measured in Hz, v is velocity of sound measured in m/s and [tex]\lambda[/tex] is wavelength measured in meters. Filling in our given info:

[tex]512=\frac{340}{\lambda}[/tex] and

[tex]\lambda=\frac{340}{512}[/tex] so

[tex]\lambda=.664 m[/tex] (That is the incorrect number of sig dig's by the way. It should only be 2 since the number 340 only has 2 sig dig's)

Answer:

The face of the cube towards A. is bright and shiny and the face towards B is dull black. State with reason the adjustments that should be made on the distances X1 and X2 so that the rate of change of temperature in both balloons is the same.

Explanation:

Convection is the mechanism by which heat is transferred from the cube to the balloon. Convection is the movement of currents inside a liquid or gas that transfers heat energy.

Convection is a method of heat transfer in which a fluid or gas, such as air or water, is moved. A hotter liquid or gas loses density and rises, while a colder, denser liquid or gas replaces it by sinking. Convection is the term used to describe the movement of gases or liquids due to temperature differences.

When the cube is heated, the air around it becomes less dense and rises; On the contrary, the cold air from all around fills the space. As a result, heat energy is transferred from the cube to the balloons via convection currents.

Therefore, Convection is the mechanism by which heat is transferred from the cube to the balloon. Convection is the movement of currents inside a liquid or gas that transfers heat energy.

Learn more about Convection, here:

https://brainly.com/question/4138428

#SPJ2

Answer:

Displacement

Explanation:

The distance between an object and a certain reference point is called displacement. This is not to be confused with distance, which represents the total distance the object has travelled to get a certain point, regardless of how long it is. Displacement always represents the shortest distance (a straight line) between the initial and final points.

Answer:

Displacement is the distance and direction of an object's change in position from a reference point. Suppose a runner jogs to the 50-m mark and then turns around and runs back to the 20-m mark.

Answer:

P = 375 Pa

Explanation:

The question says that,"If a force of 150N was applied in an area of ​​0.4m², what will be the precious exerted?"

We have,

Force, F = 150 N

Area, A = ​​0.4m²

We need to find the pressure exerted. We know that,

Pressure = forece/area

So,

[tex]P=\dfrac{150\ N}{0.4\ m^2}\\\\P=375\ Pa[/tex]

So, the required pressure is equal to 375 pa.

Answer:

a. V_y = 50m/s and V_x = 86.6m/s

b. d_x = 173.2m

c. d_y = 80.38m

Explanation:

V_x = 100m/s*cos(30°)

V_x = 86.6m/s

V_y = 100m/s*sin(30°)

V_y = 50m/s

D_x = v_x*t

d_x = 86.6m/s*2s

d_x = 173.2m

v_f = 50m/s+(-9.81m/s²)*2s

v_f = 30.38m/s

d_y = .5*(30.38m/s+50m/s)*2s

d_y = 80.38m

Answer:

D. Frequency

Explanation:

The energy of an  electromagnetic wave is proportional to frequency, mathematically it is expressed as;

E ∝ f

E = hf

where;

h is Planck's constant = 6.626 x 10⁻³⁴ Js

The equation above can also be expanded to;

[tex]E = hf = h \frac{c}{\lambda}[/tex]

where;

c is speed of light = 3 x 10⁸ m/s

λ is the wavelength of the electromagnetic wave

Since the speed of light is constant, we can conclude that the energy of the electromagnetic wave is directly proportional to its frequency and inversely proportional to its wavelength.

Therefore, the correct option for direct proportionality is FREQUENCY

Answer:

A temporary orbit in which a spacecraft awaits the next phase of its mission .