Explanation:
Hydraulic Pressure-Control, On-Off Deluge Valve
FP-400Y-5DC
The BERMAD model 400Y-5DC is an elastomeric, hydraulic line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-5DC is activated by a hydraulically operated relay valve, through which opening and closing of the valve can be controlled either with a remote hydraulic command or with a wet pilot line with closed fusible plugs. An integral pressure reducing pilot valve ensures a precise, stable, pre-set downstream water pressure. The optional valve position indicator can include a limit switch suitable for Fire & Gas monitoring systems. The 400Y-5DC is ideal for systems that combine a remote wet pilot line with a high pressure water supply.
A liquid has a density of 2 g/mL, the volume is measured at 20 mL, what is the mass of the liquid?
Answer: 40 grams, if it is two grams per mL and you have 20 mL, you multiply 2 grams/mL and you get the answer
what is the difference between MKS system and SI system of measurement
Answer:
The MKS (metre, kilogram, second) system of units is the fundamental core of the SI (Systeme Internationale, or International System) of measurement. As various fields grow new forms of measurements based on MKS, terms or exact definitions may vary in different scientific or engineering disciplines. These inconsistencies are sorted out by the international committee that defines the SI system of units and keeps it up to date.
So the MKS is the static core, and the SI is the evolving, growing system of metric measurement.
Metres and kilograms were introduced after the French Revolution around 1790. Seconds were added by the 1830s, building the MKS system. More units came later. By 1948, a need was seen to develop a clear and consistent set of terms for measurement, and this led to 12 years of work, ending with the release of the first version of the SI in 1960.
The SI now has seven base units of measure. It begins with the original three metre, kilogram, and second, and adds the ampere for electricity, candela for light, kelvin for temperature, and mole for amount (number of atoms or molecules) of a substance.
The SI defines how each fundamental unit can be measured or obtained experimentally. These definitions have changed over time. For example, the metre was originally a measure related to the circumference of the Earth, then a set number of waves of a particular wavelength, and now a distance traveled by light in a vacuum in a certain period of time.
The SI also defines modifying terms such as milli-, centi-, and kilo- that are a specific number of each unit.
The SI includes many other derived units, as well.
By standardizing international use of measurements across different fields of science and engineering, the SI reduces confusion that would slow scientific progress and error that can produce engineering catastrophe such as the loss of the Mars Climate Orbiter in 1999 due to a table that should have been in metric units (kilograms and meters) being provided in United States customary units (pounds and inches).*
The Mars Climate Orbiter and its mission were lost due to a failure to use SI units consistently.
Hope this help you!:)
balance the following equations: CUCO3+H2SO4- CUSO4+H2O+CO2
Answer:
It is already balanced
Explanation:
It is already balanced
can someone help me asap please
Answer:
Resultant force is 20 N
Explanation:
Resolving vertically:
[tex]{ \sf{F_{y} = (8 \cos 30 \degree) + (12 \cos 30 \degree) }} \\ { \sf{ \sum F_{y} = 17.3 \: newtons }}[/tex]
Resolving horizontally:
[tex]{ \sf{F_{x} = (8 \sin 30 \degree) + (12 \sin 30 \degree) }} \\ { \sf{ \sum F _{x} = 10 \: newtons}}[/tex]
Resultant force:
[tex]{ \boxed{ \bf{F = \sqrt{ {F _{x} }^{2} + {F _{y} }^{2} } }}} \\ { \sf{F = \sqrt{ {17.3}^{2} + {10}^{2} } }} \\ { \sf{F = \sqrt{399.29} }} \\ F = 19.98 \approx20 \: newtons[/tex]
Q: Riri wants to bake a cake. She adds flour, sugar, egg, baking soda, and yeast into a bowl and mixed them together. After all the ingredients are mixed, she leaves the dough for 30 minutes and the dough starts to rise. Which changes Occurred in this process? Explain your reason.
Answer:
I don't know what you mean about which changes occurred in this process but if its why the dough starts rising then its caused by the carbon dioxide in baking soda and yeast which is a fungus
Answer:
When baking,flour is mixed with water,the other ingredients and yeast to form a paste called a dough.what happens is that the zymase enzyme from the yeast acts on the sugars to form carbon dioxide and alcohol.the carbon dioxide begins to form bubbles in the dough causing it to rise..
I hope this helps
A motorcycle moving with velocity and 30m/s accelerate with 4m/s2 to gain velocity of 6mls. calculate its time to gain that velocity
Using first equation of kinematics
[tex]\boxed{\sf v=u+at}[/tex]
[tex]\\ \sf\longmapsto t=\dfrac{v-u}{a}[/tex]
[tex]\\ \sf\longmapsto t=\dfrac{30-6}{4}[/tex]
[tex]\\ \sf\longmapsto t=\dfrac{24}{4}[/tex]
[tex]\\ \sf\longmapsto t=6s[/tex]
in a cathode-ray tube, particles are fired at the screen. What are these particles
How does the comets energy change as it moves from point a to point d
Answer:
At point A, the comet has the least kinetic energy because the comet is resting. 3. From point B to point D its orbit's potential energy is decreasing and its kinetic energy is increasing meaning it's moving more and more
Explain why a person travelling in a bus falls forward when bus stops suddenly
Answer:
Cause of Inertia of Motion
Explanation:
It can be explained as follows...when the moving bus suddenly stops, the lower part of the body of the passenger contact with the bus suddenly comes to rest while the upper part of the body tends to retain its state of motion due to inertia. As a result, the passenger is thrown forward.
3. Take sugar, oil, corn syrup, a glass and water. Pour the water in the glass and then add each of the above the substances one after the other. Observe and note your observations. And give reason for your observation.
Here are the observations
Sugar:-
Sugar is soluble in water so It will dissolve in water .Corn syrup:-
Corn syrup is also basically a sugar.It will dissolve in water too .If we shake the mixture in glass then corn syrup will be dissolved.Oil:-
Oil is not soluble in waterHence it won't dissolve in water.It will float over water and make two layersexplain why resistors connected in parallel are called current dividers
Explanation:
A parallel circuit is often called a current divider for its ability to proportion—or divide—the total current into fractional parts. Once again, it should be apparent that the current through each resistor is related to its resistance, given that the voltage across all resistors is the same
Group elements number 11 to 20 as either metallic, non metallic or metalloid.
Answer:
The elements are grouped into the different substances by color. As you can see, Lithium, Beryllium, Sodium, Magnesium, Aluminum, Potassium, and Calcium are metals out of the first 20 elements.
Hydrogen, Helium, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Phosphorus, Sulfur, Chlorine, and Argon, are non-metals within the first 20 elements.
Boron and Silicon count as Metalloids in the Periodic Table (properties of both metals and non-metals)
reference- socatric q and a
Explanation:
Answer:
(11-13) - Metals
(14) - Metalloid
(15-18) - Non- metals
(19-20) - Metals
Explanation:
The elements from 11 to 13 are metals. They are Sodium(Na), Magnesium(Mg) and Aluminum(Al) respectively.
The element 14 is a metalloid. It’s Silicon(Si).
The elements from 15 to 18 are non metals. The 18th element is a noble gas known as Argon(Ar).
The elements from 15 to 17 are Phosphorus(P), Sulphur(S) and Chlorine(Cl).
The elements from 19 to 20 are metals. They are Potassium(K) and Calcium(Ca).
The net force determines how and if and object will
Answer:
Move. It also determines the total amount of force put on an object
Explanation:
The question is incomplete, the complete question is;
The net force determines how and if an object will?
A) make a balanced force
B) change its mass
C) move or accelerate
When unbalanced forces act on an object, the object moves or accelerates. The correct answer is option C: move or accelerate
Force is considered as a push or pull. Unbalanced forces refers to a system of forces acting in opposite direction and are not equal in magnitude.
Unbalanced forces cause an object to move or accelerate in the direction of the larger force.
Hence, The net or resultant force determines how and if an object will move or accelerate when under the action of unbalanced forces.
For more about an unbalanced forces see:
https://brainly.com/question/19054208
A golf club hits a 0.04551 kg golf ball off a golf tee. The club is in contact with the ball for 0.020 s, and the force applied by the club is 115 N. What is the speed of the ball as it leaves the tee
Answer:
v = 50.5 m/s
Explanation:
F = (m)(^v/^t)
115N = (0.04551kg)(v/(0.020s))
2,526.917161 m/s² = v/(0.020s)
v = 50.53834322 m/s
v = 50.5 m/s
An object is moving across a surface, but it does not gain or lose speed. Which best describes the object's force?
O The net force is positive.
O The net force is zero.
The positive force is greater than the negative force.
O The negative force is greater than the positive force.
Mark this and retum
Save and Exit
Next
Submit
Answer:
The net force is positive
Explanation:
This would mean that altogether, the force would cause the object to always be going the same way, and if it is not gaining or losing speed, we can say the force has not changed and that the object has reached terminal velocity. It is not correct to say that the positive is greater than the negative as friction also causes some type of effect and it is neither positive nor negative
balloon moves backward when air rushes out of it why
Answer:
Because the air can move out of the balloon at such a speed, it propells the balloon forward.
Explanation:
SmolFox no longer exists
~Chad~
The action of the balloon pushes against the balloon moving it in the backward direction
What is newton's third law of motion ?Newton's third law of motion states that every action have a equal and opposite reaction . If object A exert force on object B , then object B will also exert an equal and opposite force on object A . Forces result from interaction of two bodies .
As we know according to Newton's third law of motion , when the air rushes out and pushes against the air which pushes the balloon to move in opposite direction , the action of the balloon pushes against the balloon moving it in the backward direction
learn more about Newton's third law of motion
https://brainly.com/question/974124?referrer=searchResults
#SPJ3
is placing a compass near a wire with live electrical current biology, chemistry, or physics?
The process of PLACING a compass wherever you want it involves Biology. Biology deals with everything that has to happen for your brain to send instructions to your muscles, your muscles to operate your arm and your hand, and your hand to move the compass to where you want it, while your eyes keep track of what's happening and send course-corrections through your brain.
Once you get the compass there and see it start doing strange things, those EFFECTS are explained by laws of nature that are covered in Physics.
Placing a compass near a wire with live electrical current involves physics. Because, the deflection in magnetic field by the current from the electrical wire is dealt with physics.
What is magnetic field ?A magnetic field is generated by the field lines originating from a magnet or an electrical coil. The moving current is always associated with a magnetic field.
A compass acts as a tiny magnet and it deflects to the north in the absence of an electrical field. If an electric field is brought in contact with the compass the needle will deflect into the direction of the magnetic field from the wire.
The strength of a magnetic field, associated electric field, magnetic flux etc. are more focused in the branches of physics. The magnetic properties of a substance is a physical property.
Find more on magnetic properties:
https://brainly.com/question/4242549
#SPJ2
Write down the conservation of momentum?
A body having uniform velocity has zero acceleration? give reason
Answer:
A body having uniform velocity has zero acceleration because
there is not change in velocity.
why Fossil fuel has been used more in the existing world ?
Most solar hot water systems are fitted with gas or electric "boosters" that can also heat the water.
Describe why you think these are necessary.
DUE IN 2 HOURS PLEASE HELP!!
which of the following is not an example of static charge?
a.
stationary electrons
b.
stationary protons
c.
moving electrons
d.
stationary neutrons
7.
What is TRUE about NIBIN?
ОА. .
It inspired the creation IBIS.
ОВ.
It inspired the creation of IBIS.
O C.
It was created by the FBI and the ATF.
OD.
It was used in the early 1900s.
Reset
Answer:
the true about n i b i n is they are Commissioner
Answer:
it was created by FBI and ATF
Explanation:
the closes thing I gound to an answer is:
NIBIN is a nationally networked system administered by ATF to assist law enforcement in solving firearms related violent crimes. IBIS is a collection of electronic images ofballistic evidence recovered from crime scenes and test-fired firearms that have been taken into law enforcement custody in the United States.
Which quantity can be measured directly using a micrometer screw gauge? A the area of a sheet of paper B the mass of a sheet of paper с the thickness of a sheet of paper D the volume of a sheet of paper
Answer: C) the thickness of a sheet of paper.
Explanation:
A micrometer screw gauge is a tool that measures distances (in order of millimeters), from this, we can see that the correct option is C: the thickness of a sheet of paper.
Now let's expand on this.
Knowing that the micrometer only can measure distances, we need to analyze which of the options is only a distance.
Notice that while area and volume have similar units, are really different things.
So analyzing the options we have:
A) "the area of a sheet of paper"
To find the area we need two measures (length and width) and then multiply this, but with a micrometer, we never measure the length of a sheet of paper (the maximum measure that you can get in a micrometer is of a few centimeters).
B) "the mass of a sheet of paper"
We can't measure mass with a micrometer.
C) " the thickness of a sheet of paper"
The thickness of a sheet of paper is of the order of 1mm, so we can easily measure this with a micrometer screw gauge.
D) " the volume of a sheet of paper"
We have a similar problem as the one seen in A.
Then the correct option is C.
If you want to learn more, you can read:
https://brainly.com/question/16017208
a car is stationary at first.it moves off with.acceleration of 2m.s-2.Calculate how far it will move in 10s
Answer:
100 m.
Explanation:
At first the car was stationary, so its inicial velocity is zero. Considering its inicial position 0 m and using the Equation of motion for the position:
X(t) = Xo + vo.t +a[tex]t^{2}[/tex]/2 , vo=0, Xo=0, a=2m/[tex]s^{2}[/tex]
X(10) = (2 x [tex]10^{2}[/tex])/2 = 100 m.
2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.
Answer:
d. No, porque la ecuación de trabajo lo define.
Explanation:
En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.
Matemáticamente, el trabajo realizado viene dado por la fórmula;
[tex] W = F * d [/tex]
Dónde;
W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.
what is the kinetic energy of a 2,000-kg car moving at 20m/s
Answer:
400k
Explanation:
Formula for KE = [tex]\frac{1}{2} mv^{2}[/tex]
Plug in:
KE = [tex]\frac{1}{2} mv^{2}[/tex]
KE = [tex]\frac{1}{2}[/tex] × 2000 × 20^2
Solve:
1000 × 400 = 400,000 or 400k
Hope this helped.
Answer : 400000J OR 4×10^4J
Kinetic energy= 1/2mv^2
Here, m=2000kg; V=20m/s
1/2×2000×20×20=400,000J
An instructor wishes to determine the wavelength of the light in a laser beam. To do so, he directs the beam toward a partition with two tiny slits separated by 0.195 mm. An interference pattern appears on a screen that lies 5.10 m from the slit pair. The instructor's measurements show that two adjacent bright interference fringes lie 1.55 cm apart on the screen. What is the laser's wavelength (in nm)
Answer:
λ = 610.6 nm
Explanation:
We are given;
Separation distance; d = 0.195 mm = 0.195 × 10^(-3) m
Interference pattern distance; D = 4.95 m
Width of the two adjacent bright interference; β = 1.55 cm = 1.55 × 10^(-2) m
Formula for the Fringe width is;
β = Dλ/d
Where;
λ is laser's wavelength
Thus;
λ = (d × β)/(D)
λ = (0.195 × 10^(-3) × 1.55 × 10^(-2))/4.95
λ = 610.6 × 10^(-9) m
λ = 610.6 nm
Một bóng đèn có hiệu điện thế định mức là 110V. Đặt vào hai đầu bóng đèn các hiệu điện thế sau đây, hỏi trường hợp nào dây tóc của đèn sẽ đứt?
Answer:
fhaiisjrbekxkrkebxnsiiwj4bnds
how to find the mechanical advantage
Answer:
[tex]{ \bf{mechanical \: adv = \frac{load}{effort} }}[/tex]
