Una pelota q rodaba a 93,6 dm/s, luego de 14,4 segundos se detiene.¿cual fue el valor de su aceleracion?

Answer:

the answer is 4m/ s²

hope this helps love!! <3

Answer:

I have a screenshot of this.

Explanation:

Answer:

If the collector of the cell is covered, the voltage is higher

Explanation:

The collector of the a passive, active, or photovoltaic (PV) solar cell is the device that takes the Sun's energy by the absorption of the Sun's radiation which is then transformed into electricity and heat. The ability to absorb the Sun's energy is given by the material type and the coating of solar collector

Therefore, the device requires access to energy from Sunlight to get the energy which can be stored in a rechargeable cell and well the collector's cell is covered, access to Sunlight is denied and therefore energy is not supplied to the cells and current is not generated and there is no flow of electricity and the voltage in the circuit is lower or there is no voltage in the circuit

The statement which is wrong about the solar cell is therefore, that if the collector of the cell is covered, the voltage is higher

Answer:

B.

Hope this helps

Answer:

3) Act on different objects

Explanation:

Newton's third law of motion states that for every action there is an equal and opposite reaction.

Action-reaction force pairs make it possible for fishes to swim, birds to fly, cars to move, etc.

Basically, action-reaction force pairs are characterized by the following statements;

I. The forces are the same type such as magnetic force, contact force or gravitational force.

II. The forces are equal in magnitude but opposite in direction.

III. They act up on two different bodies.

Hence, the two forces that make up 3rd law of motion can act on different objects.

For example, while driving down the road, a bug strikes the windshield of a vehicle (Action) and makes a quite obvious mess in front of the face of the driver of the vehicle (Reaction) i.e the bug hit the vehicle and the vehicle hits the bug.

Answer:

OK HERE

Explanation:

When raising a power to a power in an exponential expression, you find the new power by multiplying the two powers together. For example, in the following expression, x to the power of 3 is being raised to the power of 6, and so you would multiply 3 and 6 to find the new power.

Answer:

La entropía del vapor de mercurio cambia en 214.235 joules por Kelvin.

Explanation:

Por definición de entropía ([tex]S[/tex]), medida en joules por Kelvin, tenemos la siguiente expresión:

[tex]dS = \frac{\delta Q}{T}[/tex] (1)

Donde:

[tex]Q[/tex] - Ganancia de calor, en joules.

[tex]T[/tex] - Temperatura del sistema, en Kelvin.

Ampliamos (1) por la definición de calor latente:

[tex]dS = \frac{L_{v}}{T}\cdot dm[/tex] (1b)

Donde:

[tex]m[/tex] - Masa del sistema, en kilogramos.

[tex]L_{v}[/tex] - Calor latente de vaporización, en joules

Puesto que no existe cambio en la temperatura durante el proceso de vaporización, transformamos la expresión diferencial en expresión de diferencia, es decir:

[tex]\Delta S = \frac{\Delta m \cdot L_{v}}{T}[/tex]

Como vemos, el cambio de la entropía asociada al cambio de fase del mercurio es directamente proporcional a la masa del sistema. Si tenemos que [tex]m = 0.50\,kg[/tex],[tex]L_{v} = 2.7\times 10^{5}\,\frac{J}{kg}[/tex] and [tex]T = 630.15\,K[/tex], entonces el cambio de entropía es:

[tex]\Delta S = \frac{(0.50\,kg)\cdot \left(2.7\times 10^{5}\,\frac{J}{kg} \right)}{630.15\,K}[/tex]

[tex]\Delta S = 214.235 \,\frac{J}{K}[/tex]

La entropía del vapor de mercurio cambia en 214.235 joules por Kelvin.

Answer:

So every hour he makes 10 miles.  So he would take 1 and a half hours to go to Mcdonalds 15 miles away.

Explanation:

[tex]\huge\boxed{{\textsf{90 minutes}}}[/tex]

We know that Mike's speed is [tex]\dfrac{10\ \text{miles}}{60\ \text{minutes}}[/tex] since there are [tex]60[/tex] minutes in an hour, and we know that MIke needs to travel [tex]15[/tex] miles. We'll model this using fractions:

[tex]\dfrac{10\ \text{miles}}{60\ \text{minutes}}=\dfrac{15\ \text{miles}}{x\ \text{minutes}}[/tex]

We can see that there is a [tex]2:3[/tex] ratio here, so we'll divide the left fraction by [tex]2[/tex] and multiply it by [tex]3[/tex] to get the right fraction.

[tex]\dfrac{10}{60}\Rightarrow\dfrac{5}{30}\Rightarrow\dfrac{15\ \text{miles}}{\boxed{90\ \text{minutes}}}[/tex]

Answer:

Explanation:

In a velocity/time (aka acceleration) graph, the slope of a line indicates the value of the acceleration in m/s/s. Acceleration is the change in velocity over the change in time. From 0 - 2 seconds, there is no change in velocity, so the acceleration during this interval is 0 (which is the same as the slope of the line). From 2 - 4 seconds, the slope of the line is -2, so the acceleration during the time interval from 2 to 4 seconds is -2 (negative because David is slowing down but is still going the same direction: to the right).

Answer:

I think true

Explanation:

I hope I'm right and I hope it helps

Answer:

true

Explanation:

basta yun yung sagot ko

Answer:

the person who invented gravity

Explanation:

newton was a mathmaticians when one day an apple fell on him. he had the idea to name the force gravity. While he "made" gravity he made other important laws the 3 newton laws of physics

Answer:

Issac Newton was around in the 1600s and early 1700s and is a very important mathematician and invented calculus.

Explanation:

Answer:

ans: 6 m/s

Explanation:

spaceship 1 has mass= 150kg

initial momentum of spaceship 1 = 900 kg•m/s

we know,

momentum = mass × velocity

so,

velocity = momentum/mass

= 900 / 150

= 6 m/s

since we know it was initial momentum so, velocity is initial speed,

Answer:

Parallel combination

Explanation:

When the two resistances are connected in parallel then the equivalent resistance is

[tex]\frac{1}{R}=\frac{1}{R'}+\frac{1}{R''}[/tex]

To get the minimum resistance of a circuit, the circuit components should be connected in parallel combination.

In the parallel combination, the voltage across each resistor is same and the current is divided in every resistance according to the resistances.

Answer:

oxygen is used up is the answer

Explanation:

These vaporized molecules are drawn up into the flame, where they react with oxygen from the air to create heat, light, water vapor (H2O) and carbon dioxide (CO2).

Answer:

i) densidad

ii) conductividad eléctrica

Explanation:

Las propiedades características de una sustancia se denominan también propiedades intrínsecas. Estas son propiedades que no dependen de la cantidad de sustancia presente.

Las propiedades características se pueden utilizar para identificar una sustancia porque son propiedades que siempre debe exhibir la sustancia.

Entre las opciones, podemos encontrar las siguientes sustancias características;

i) densidad

ii) conductividad eléctrica

Explanation:

If the satellite is moving too quickly then the gravitational attraction between the Earth and the satellite is too weak to keep it in orbit. If this is the case, the satellite will move off into space. This occurs at speeds around or above 11,200 metres per second (m/s).

The question is: The weight (w) of a person on Earth is 550N. Determine the mass (m) of the person and the weight (w) of the person on the Moon.

Answer: The mass (m) of the person is 550 N and the weight (w) of the person on the Moon is 891 kg.

Explanation:

Given: Mass = 550 N

When a person moves towards moon then its mass will remain the same but there will occur change in its weight because the acceleration due to gravity on moon is different than that on Earth.

Therefore, formula used to calculate the weight of person on moon is as follows.

[tex]W = m \times g_{m}[/tex]

where,

m = mass

[tex]g_{m}[/tex] = acceleration due to gravity on moon = 1.62 [tex]m/s^{2}[/tex]

Substitute the values into above formula as follows.

[tex]W = m \times g_{m}\\= 550 N \times 1.62 m/s^{2}\\ (1 N = 1 kg \times m/s^{2})\\= 891 kg[/tex]

Thus, we can conclude that the mass (m) of the person is 550 N and the weight (w) of the person on the Moon is 891 kg.

Work is equal to the magnitude of the force multiplied by the displacement x. Assuming Magali is pushing the phone, so that the force and displacement point in the same direction, then the work done is positive, and

2.7 J = (4.5 N) x   ==>   x = (2.7 J) / (4.5 N) = 0.60 m

Even if she was pulling the phone instead, the displacement would be the same, but the work done would be negative and the force would point in the opposite direction, thus also having a negative sign:

-2.7 J = (-4.5 N) x   ==>  x = 0.60 m

Answer:

[tex]n _{v} = \frac{c}{v} \\ = \frac{3 \times {10}^{8} }{2.30 \times {10}^{8} } \\ = 1.30[/tex]

This question involves the concept of refractive index.

The refractive index of the vinegar is "1.3".

The refractive index is defined as the ratio of the speed of light in air and the speed of light in the given medium which is vinegar here.

[tex]\eta = \frac{c}{v}[/tex]

where,

Therefore,

[tex]\eta = \frac{3\ x\ 10^8\ m/s}{2.3\ x \10^8\ m/s}[/tex]

η = 1.3

Learn more about refractive index here:

https://brainly.com/question/23750645

#SPJ2

Answer:

WHat do you mean by that

Explanation:

I dont get what you re asking

Answer:

The sun is located in the Milky Way Galaxy.

Answer:

A. 59.4

Explanation:

The refractive index of the glass, n₁ = 1.50

The angle of incidence of the light, θ₁ = 35°

The refractive index of air, n₂ = 1.0

Snell's law states that n₁·sin(θ₁) = n₂·sin(θ₂)

Where;

θ₂ = The angle of refraction of the light, which is the angle the light will have when it passes from the glass into the air

Therefore;

θ₂ = arcsin(n₁·sin(θ₁)/n₂)

Plugging in the values of n₁, n₂ and θ₁ gives;

θ₂ = arcsin(1.50 × sin(35°)/1.0) ≈ 59.357551° ≈ 59.4°

The angle the light will have when it passes from the glass into the air, θ₂ ≈ 59.4°.

Answer:

A. 59.4

Explanation:

got it right, trust

Explanation:

everything can be found in the picture

Answer:

Efficiency = 0.575 = 57.5%

Explanation:

First, we will calculate the output energy of the elevator, which is equal to the potential energy acquired by the load.

[tex]O = Potential\ Energy\\O = mgh[/tex]

where,

O = Output = ?

mg = W = Weight = 12500 N

h = height = 29 m

Therefore,

[tex]O = (12500\ N)(29\ m) \\O = 362500\ J = 362.5\ KJ[/tex]

The input is given as:

I = 630 KJ

Thus the efficiency will be:

[tex]Efficiency = \frac{O}{I} = \frac{362.5\ KJ}{630\ KJ}\\\\[/tex]

Efficiency = 0.575 = 57.5%

Answer:

I. Stopping acceleration = 6 m/s²

II. Stopping distance, S = 75 meters

Explanation:

Given the following data;

Final velocity = 30 m/s

Time = 5 seconds

To find the stopping acceleration;

Mathematically, acceleration is given by the equation;

[tex]Acceleration (a) = \frac{final \; velocity - initial \; velocity}{time}[/tex]

Substituting into the equation;

[tex]a = \frac{30 - 0}{5}[/tex]

[tex]a = \frac{30}{5}[/tex]

Acceleration = 6 m/s²

II. To find the stopping distance, we would use the third equation of motion;

[tex] V^{2} = U^{2} + 2aS [/tex]

Where;

V represents the final velocity measured in meter per seconds.

U represents the initial velocity measured in meter per seconds.

a represents acceleration measured in meters per seconds square.

Substituting into the equation, we have;

30² = 0² + 2*6*S

900 = 12S

S = 900/12

S = 75 meters

Answer:

The relationship between voltage, current, and resistance is described by Ohm's law. This equation, i = v/r, tells us that the current, i, flowing through a circuit is directly proportional to the voltage, v, and inversely proportional to the resistance, r.