urgent!!!
factor affecting for the depth which is exerted by the foot print of a bull and a man with same masses on a sand floor is,

1.The pressure exerted by the foot of bull is low
2.the pressure exerted by the foot of man is high
3.the area wich touches the sand foor human feet is less
4.the area wich touches the sand floor of 4 feet of the bull is less than the man.
please this is urgent....​

Answer:

The larger the number of charges flowing through the wire,the larger is the current flowing in the wire.

Explanation:

if the wire is large then large amount of current flows through the circuit.but if the wire is small then a smaller amount of current will pass through.

I hope this helps

The final volume is 4.0 liters.

We can calculate the final volume with Boyle's law:

[tex] P_{i}V_{i} = P_{f}V_{f} [/tex]  (1)

Where:

[tex] P_{i}[/tex]: is the initial pressure = 100 kPa

[tex] V_{i}[/tex]: is the initial volume = 1.0 L

[tex]P_{f}[/tex]: is the final pressure = 25 kPa

[tex]V_{f}[/tex]: is the final volume =?

Hence, the final volume is:

[tex] V_{f} = \frac{P_{i}V_{i}}{P_{f}} = \frac{100 kPa*1.0 L}{25 kPa} = 4.0 L [/tex]

Therefore, the final volume is 4.0 liters.

You can learn more about  Boyle's law here: https://brainly.com/question/21184611?referrer=searchResults

I hope it helps you!

Answer:

i hope it helped U

stay safe stay happy

Answer:

Newton's third law: If an object A exerts a force on object B, then object B must exert a force of equal magnitude and opposite direction back on object A. This law represents a certain symmetry in nature: forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.

Answer:

analyze

Explanation:

Answer:

A dog runs from his home & goes 400 m around the block before reaching back home. What is the dog's total distance & displacement?

Distance: 400 m & displacement:0m

Explanation:

Option B is the answer.

Hope it helps.

Answer:

200J

Explanation:

K.E=½mv²

K.E=½×16kg×5m/s²

K.E=8kg×25

K.E=200J

Answer:

Often the independent variable is plotted on the x-axis - and example might be time (an experiment where time is measured by a watch or an independent mechanical device)

The dependent variable is often plotted on the y-axis - and example here might be the velocity or the acceleration,

It may be the responsibility of the experimenter to determine the value of the dependent variable by some type of measurement

Answer:

Step 1. Make observations.

Step 2. Form a hypothesis.

Step 3. Make a prediction.

Step 4. Perform an experiment.

Step 5. Analyze the results of the experiment.

Step 6. Draw a conclusion.

Step 7. Report your results.

Explanation:

The first step in the Scientific Method is to make objective observations. These observations are based on specific events that have already happened and can be verified by others as true or false. Step 2. Form a hypothesis.

Our observations tell us about the past or the present. As scientists, we want to be able to predict future events. We must therefore use our ability to reason.

Scientists use their knowledge of past events to develop a general principle or explanation to help predict future events. The general principle is called a hypothesis. The type of reasoning involved is called inductive reasoning (deriving a generalization from specific details).

A hypothesis should have the following characteristics:

• It should be a general principle that holds across space and time

• It should be a tentative idea

• It should agree with available observations

• It should be kept as simple as possible.

• It should be testable and potentially falsifiable. In other words, there should be a

way to show the hypothesis is false; a way to disprove the hypothesis.

Some mammals have two hind limbs would be a useless hypothesis. There is no observation that would not fit this hypothesis!

All mammals have two hind limbs is a good hypothesis. We would look throughout the world at mammals. When we find whales, which have no hind limbs, we would have shown our hypothesis to be false; we have falsified the hypothesis.

When a hypothesis involves a cause-and-effect relationship, we state our hypothesis to indicate there is no effect. A hypothesis, which asserts no effect, is called a null hypothesis. For instance, the drug Celebra does not help relieve rheumatoid arthritis.

Answer:

White light entering a prism is bent, or refracted, and the light separates into its constituent wavelengths. Each wavelength of light has a different colour and bends at a different angle. The colours of white light always emerge through a prism in the same order—red, orange, yellow, green, blue, indigo, and violet.

Answer:

The girl exerts more pressure.

Explanation:

Pressure can be defined as the force exerted normally or perpendicularly per unit area.

i.e P = F/A

Girls

Area of the heel = 1cm² = 10^(-4) m²

Force = mg = 50 × 10 = 500N

Pressure =

[tex] \frac{500}{10 ^{ - 4} } [/tex]

[tex] = 5 \times {10}^{6}[/tex]

Elephant

Area = 250cm² = 2.5 x 10^(-2)b m²

Force = mg = 40000N

Pressure =

[tex] \frac{40000}{2.5 \times {10}^{ - 2} } [/tex]

[tex] = 1.6 \times {10}^{6} [/tex]

Answer:

if the distance between them is halved then gravitational force will be doubled....

My answer is in the picture

Swipe the pictures to see the others

Answer:

300,000=3×10^3

.000012=1.2×10^-6

Answer:

42.5J/kgk

Just use the formula

C = Q/m x change in temp

Answer:

element name = neon

no of proton = 10

no. if neutron = 9

atomic no. = 10

atomic weight = 20.17179u

it lies in group 18 and period 2

it is nonmetal because it is a noble gas .

hope this helped you ☺️

Answer:

45/30

Explanation:

bbsksksbsnbksbsksbs

Nikki has a momentum of 45 Kilogram meters per second and a mass of 30 Kilograms. then her velocity would be 1.5 meters per second

It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.

Mathematically the formula of the momentum is

P = mv

where P is the momentum of the particle

m is the mass of the particle

v is the velocity by which the particle is moving

As given in the problem Nikki has a momentum of 45 Kilogram meters per second and a mass of 30 Kilograms

P = 45 Kilogram meters per second

m = 30 Kilograms

By substituting the values of the momentum and the mass in the formula of the momentum

P = mv

45 = 30 ×v

v = 45/30 meters per seconds

v = 1.5 meters per seconds

Thus, Nikki weighs 30 kilograms and moves at a 45 kilogram per the second momentum. subsequently, her velocity would be 1.5 meters per second.

Learn more about momentum from here

brainly.com/question/17662202

#SPJ4

Explanation:

The correct answer is option B

Answer:

C. When ice melts, it absorbs energy.

Explanation:

When ice melts, it is getting hotter by absorbing energy and changes from a solid to a liquid. This is an endothermic reaction.

Answer:

The bonds can shift because valence electrons are held loosely and move freely.

Explanation:

Ill put the rest of the answers in the comments

Answer:

The bonds can shift because valence electrons are held loosely and more freely.

Answer: Scientific theories are never proven.

Explanation:

Answer:

Pressure is 1.96 × 10^12 Pa

Explanation:

[tex]{ \bf{pressure = \frac{force}{area} }}[/tex]

height = 4 cm = 0.04 m

density = 20 g/cm³ = 20,000 kg/m³

But for force:

[tex]{ \sf{force = mass \times acceleration}} \\ { \sf{force = ( \frac{density}{volume} ) \times acceleration}} \\ \\ { \sf{force = ( \frac{20000 }{0.04 {}^{3} }) \times 10 }} \\ \\ { \sf{force = 3.13 \times {10}^{9} \: newtons}}[/tex]

For area:

[tex]{ \sf{area = 0.04 \times 0.04 = 0.0016 \: m {}^{2} }}[/tex]

[tex] { \tt{pressure = \frac{3.13 \times {10}^{9} }{0.0016} }} \\ \\ = { \tt{1.96 \times {10}^{12} \: pascals}}[/tex]

Answer:

Favorable sites include the tops of smooth, rounded hills; open plains and water; and mountain gaps that funnel and intensify wind. Wind resources are generally more favorable for electricity generation at higher elevations above the earth's surface

The time that takes for the train that is traveling with an initial velocity of 20.1 m/s to stop is 402 seconds.    

The time that will take for the train to stop can be calculated with the following kinematic equation:

[tex] v_{f} = v_{i} + at [/tex]   (1)

Where:

[tex] v_{f}[/tex]: is the final velocity = 0 (when it stops)

[tex] v_{i}[/tex]: is the intial velocity = 20.1 m/s

a: is the acceleration = -0.0500 m/s²

t: is the time =?

By solving equation (1) for t, we have:

[tex] t = \frac{v_{f} - v_{i}}{a} = \frac{0 - 20.1 m/s}{-0.0500 m/s^{2}} = 402 s [/tex]

Therefore, it will take 402 seconds for the train to stop.  

To find more about acceleration and velocity go here: https://brainly.com/question/2136991?referrer=searchResults

I hope it helps you!

Answer: Approximately 22 cm

=========================================================

Explanation:

The unstretched spring is 12.0 cm long. When adding a load of 5.0 N, it stretches to 15.0 cm. This is a displacement of 15.0 - 12.0 = 3.0 cm, which is the amount the spring is stretched.

Convert this displacement to meters (so that it fits with the meters unit buried in Newtons).

3.0 cm = (3.0)/100 = 0.03 m

Apply Hooke's Law to find the spring constant k

F = -kx

5.0 = -k*(0.03)

k = -(5.0)/(0.03)

k = -166.667 approximately

Now we must find the displacement x when F = 15 newtons

F = -kx

-kx = F

x = F/(-k)

x = -F/k

x = -15/(-166.667)

x = 0.089 approximately

x = 0.1

The displacement to one decimal place is about 0.1 meters, which converts to 100*0.1 = 10 cm

So the spring will be stretched to about 12cm+10cm = 22 cm

Here we can study the different temperatures of each one of the layers of the sun.

We will find that the way that the scientist can identify which layer are they studying is "The lowest temperatures are from the photosphere."

A brief description of the temperature of each layer is:

Center of the sun: about 15 million K

Radiative Zone:  Goes from 7 million K to 2 million K.

Convection Zone: goes from 2 million K to 5800K

Photosphere: Is in average 5800 K , but there are sunspots with lower temperatures, of around 3800 K.

Chromosphere: goes from 4300 K to  8300 K

Corona: Around 2 million K.

So now we can analyze each of the options to see which ones make sense.

A) The highest temperatures are from the corona.

This is false, we can see that in the center and in the radiative zone we have larger temperatures than in the corona.

B) The lowest temperatures are from the photosphere.

While on average the temperature of the photosphere is larger than the smaller temperature of the chromosphere, in the photosphere we have the sunspots, and there we have the smallest temperatures in the whole sun, so this is true.

C) The lowest temperatures are from the core (or center).

Clearly false, there we have the larger temperatures.

D)  The highest temperatures are from the radiative zone.

Again false, the larger temperatures are in the center.

So the only true option is "The lowest temperatures are from the photosphere."

If you want to learn more, you can read:

https://brainly.com/question/12117482

Answer:

The lowest temperatures are from the photosphere

Explanation:

I just took this quick check on connexus

Ionic bonds form when a nonmetal and a metal exchange electrons, while covalent bonds form when electrons are shared between two nonmetals. An ionic bond is a type of chemical bond formed through an electrostatic attraction between two oppositely charged ions.

the real answer is

O metals and nonmetals, electrons transferrednonmetals and metals, electrons shared

Answer:

kilo means 1000

2a. 0.1

b. 100

c.0.01

d. 0.001

3a.km

b.mL

d.cg

e.mm

g. g

h.kL

Hi,

The man on the ground in standing position has more pressure. This is because when he stands, only his legs are in contact with the ground. While lying, his body is more in contact with the ground, therefore, he exerts less pressure.

To the point, a man standing position on the ground had more pressure.

More is the area of contact, less is the pressure efforted.

Thank you...