The p-value for the Box-Ljung Q test of returns is greater than 5%, which means that we do not reject the null hypothesis and find no evidence of volatility clustering in the raw returns.
What is p value?In statistics, p-value is a measure of the strength of evidence against the null hypothesis. It is defined as the probability of obtaining the observed results, or results more extreme, assuming that the null hypothesis is true.
The null hypothesis is a statement that assumes there is no significant difference or relationship between two groups or variables being compared. The alternative hypothesis is the statement that there is a significant difference or relationship.
Given by the question.
Based on the information provided, we can conclude that there is evidence of volatility clustering in the IBM data using 15 lags. This is indicated by the p-value being less than 5% for the Box-Ljung Q test of squared returns. Therefore, we reject the null hypothesis and find evidence of volatility clustering.
However, since the test is conducted on squared returns, it is the p-value for this test that is more relevant in assessing volatility clustering.
To learn more about variables:
https://brainly.com/question/17344045
#SPJ1
How much would it cost to buy a sheet of a metal 4m by 75cm which cost E90 to a metal of 5m by 2m
It would cost €27 to buy a sheet of area 4 meters by 75 centimeters.
We solve this problem easily by employing the unitary method. To answer this question, we need to first calculate the area of the metal sheet being sold and the area of the metal sheet being purchased.
The area of the metal sheet being sold is:
5 meters × 2 meters = 10 square meters
The area of the metal sheet being purchased is:
4 meters × 0.75 meters = 3 square meters
Now we can calculate the price per square meter of the metal sheet being sold:
€90 ÷ 10 square meters = €9 per square meter
Finally, we can calculate the cost of the metal sheet being purchased:
3 square meters × €9 per square meter = €27. Therefore, the cost to buy a sheet of area 4 meters by 75 centimeters which costs €90 to a metal of area 5 meters by 2 meters would be €27.
Learn more about the unitary method on
https://brainly.com/question/14793162?referrer=searchResults
#SPJ4
The shedding frequency based on the analysis of Question 3 is to be determined through the use of a small-scale model to be tested in a water tunnel. For the specific bridge structure of interest D=20 cm and H=300 cm, and the wind speed V is 25 m/s. Assume the air is at MSL ISA conditions. For the model, assume that Dm =2 cm. (a) Determine the length of the model Hm needed for geometric scaling. (b) Determine the flow velocity Vm needed for Reynolds number scaling. (c) If the shedding frequency for the model is found to be 27 Hz, what is the corresponding frequency for the full-scale structural component of the bridge? Notes: Refer to the eBook for the properties of air. Assume the density of water
rhoH2O = 1000 kg/m3 and the dynamic viscosity of water μH2O =1×10^−3 kg/m/s
Answer:
Step-by-step explanation:
Suppose f is a continuous function defined on a rectangle R=[a,b]X[c,d]. What is the geometric interpretation of the double integral over R of f(X,y) if f(X,y)>0
If f(x,y) > 0 and is a continuous function defined over a rectangle R=[a,b]x[c,d], then the double integral over R of f(x,y) can be interpreted as the volume of a solid that lies in the first octant and under the graph of the function f(x,y) over the region R.
The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0, where f is a continuous function defined on a rectangle R = [a,b] × [c,d] is given as follows:
The double integral of f(x,y) over R, if f(x,y) > 0, gives the volume under the graph of the function f(x,y) over the region R in the first octant.
Consider a point P (x, y, z) on the graph of f(x, y) that is over the region R, and let us say that z = f(x,y). If f(x,y) > 0, then P is in the first octant (i.e. all its coordinates are positive).
As a result, the volume of the solid that lies under the graph of f(x,y) over the region R in the first octant can be found by integrating the function f(x,y) over the rectangle R in the xy-plane, which yields the double integral.
The following formula represents the double integral over R of f(x,y) if f(x,y) > 0:
∬Rf(x,y)dydx
The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0 is given by the volume of the solid that lies under the graph of the function f(x,y) over the region R in the first octant.
To know more about the "continuous function": https://brainly.com/question/30089593
#SPJ11
I NEED YOUR HELP ASAP!!
To create a modified box plot for a data set, determine the outliers of the data set and the smallest and largest numbers in the data set that are not outliers. Next, determine the median of the first half of the data set, the median of the entire data set, and the median of the second half of the data set.
What are the values that are needed to create a modified box plot for this data set?
19, 15, 22, 35, 16, 22, 4, 22, 24, 16, 17, 21
Enter your answers in the blanks in order from least to greatest.
Smallest number in the data set that is not an outlier is 15, Median of the first half is 17, Median of the entire data set is 20.5. Median of the second half is 22. Largest number in the data set that is not an outlier is 35.
Give a short note on Median?
In statistics, the median is a measure of central tendency that represents the middle value in a dataset. To find the median, the data must first be sorted in ascending or descending order. If the dataset contains an odd number of values, the median is the middle value. If the dataset contains an even number of values, the median is the average of the two middle values.
The median is a useful measure of central tendency in datasets that are skewed or have outliers, as it is less sensitive to extreme values than the mean. It is also useful in datasets with non-numeric values, such as rankings or survey responses.
To create a modified box plot, we need the following values:
The smallest number in the data set that is not an outlier: 15
The median of the first half of the data set: 17
The median of the entire data set: 20.5
The median of the second half of the data set: 22
The largest number in the data set that is not an outlier: 35
So the values needed to create a modified box plot for this data set are: 15, 17, 20.5, 22, 35.
National Collegiate Athletic Association (NCAA) statistics show
that for every 75,000 high school seniors playing basketball, about 2250 play
college basketball as first-year students. Write the ratio of the number of first-
year students playing college basketball to the number of high school seniors
playing basketball.
Answer: 100:3
Step-by-step explanation:
Answer:
the ratio of first-year college basketball players to high school seniors playing basketball is 3:100.
Step-by-step explanation:
The problem states that for every 75,000 high school seniors playing basketball, about 2,250 play college basketball as first-year students. To write the ratio of first-year college basketball players to high school seniors playing basketball, we need to compare the two quantities.
The ratio is a way of expressing the relationship between two numbers as a fraction or a pair of numbers separated by a colon (:). In this case, we want to express the ratio of the number of first-year college basketball players to the number of high school seniors playing basketball.
To write the ratio, we start by putting the number of first-year college basketball players (2,250) in the numerator of a fraction. We put the number of high school seniors playing basketball (75,000) in the denominator of the same fraction.
So the ratio can be expressed as:
2,250/75,000
To simplify this fraction, we can divide both the numerator and denominator by a common factor. In this case, both 2,250 and 75,000 are divisible by 750. Dividing both numbers by 750 gives:
2,250/75,000 = 3/100
Simplify.
Remove all perfect squares from inside the square root. Assume x is positive.
20x8 =
The simplified form of the given expression as required to be determined in the task content is; 2x⁴√5.
What is the simplified form of the given expression?It follows from the task content that the Simon form of the given expression √20x⁸ is required to be determined from the task content.
On this note, since the given expression is; √20x⁸.
We have that; = √ (4 × 5 × x⁸)
Therefore, since 4 and x⁸ are perfect squares; it follows that we have;
= 2x⁴ √5.
Ultimately, the simplified form of the given expression as required to be determined is; 2x⁴ √5.
Complete question; The correct expression is; √20x⁸.
Read more on perfect squares;
https://brainly.com/question/27307830
#SPJ1
The mean height of 15 pupils is 159 cm. One of these pupils is 148 cm and leaves the group. Determine the new mean height of the group. Give your answer correct to 1 decimal place.
Using the mean formula we know that the new mean height of 14 people is 159.7 cm.
What is mean?A mean in math is the average of a data set, calculated by adding all numbers together and then dividing the total of the numbers by the number of numbers.
For illustration, with the dataset containing: 8, 9, 5, 6, 7, the mean is 7, as 8 + 9 + 5 + 6 + 7 = 35, 35/5 = 7.
The mean height given is 159 cm.
Let, x1, x2, x3 ..... x15 be the height of 15 people.
x1+x2+x3 ..... x15/15 = 159
x1+x2+x3 ..... x15 = 159 * 15 = 2385 cm ...(1)
Let, x1 = 148 cm, who leaves the group.
148+x2+x3 ..... x15 = 2385 cm
x2+x3 ..... x15 = 2237 cm
Now, we have 14 people.
New mean = x2+x3 ..... x15/14
= 2237/14
= 159.7 cm
Therefore, using the mean formula we know that the new mean height of 14 people is 159.7 cm.
Know more about mean here:
https://brainly.com/question/1136789
#SPJ1
Find the height of an open cylinder of radius of 8cm given that it has a curved surface area of 1000cm²
The height of an open cylinder of radius of 8cm given that it has a curved surface area of 1000 cm² is equals to the 159.24 cm.
The area obtained after substracting the circular area from the total area of the cylinder is called as curved surface area. Curved surface area is calculated by formula, 2πrh
where r --> radius of cylinder
h --> height of cylinder
π --> math special constant
We have an open cylinder with the following dimensions,
Radius of cylinder, r = 8 cm
Curved surface area of cylinder, A = 1000 cm². We have to calculate the height of this open cylinder. Let the height of an open cylinder be 'h cm' . Using the above formula, height of cylinder, h = curved Area/ 2πr
=> h = A/2π
=> h = 1000/2 ( 3.14)
=> h = 1000/6.28
=> h = 159.24
Hence, required value of height is 159.24 cm.
For more information about curved surface area of cylinder, visit :
https://brainly.com/question/20560861
#SPJ4
Write a quadratic function in standard form to represent the data in the table.
Ordered pairs arranged in a table. From left to right the pairs are: 2, 3, and 4, 1, and 6, 3, and 8, 9, and 10, 19.
y = x2 − x +
Polynomial question
I don't understand this working
Why is b = d = 0 if the function is even?
Please explain the steps to solve a question like this.
To understand why b = d = 0 if the function is even, we need to consider the definition of an even function.Therefore If P(x) is an even function, then b = d = 0.
What is Polynomial?A polynomial is a mathematical expression that consists of variables and coefficients, combined using the operations of addition, subtraction, and multiplication. It can have one or more terms and can be of any degree.
An even function is a function that satisfies the condition f(x) = f(-x) for all x in the domain of the function.
If P(x) is an even function, then we have P(x) = P(-x) for all x. Substituting -x for x in the expression for P(x), we get:
P(-x) = a(-x)⁴ + b(-x)³ + c(-x)² + d(-x) + e
= a(x⁴) - b(x³) + c(x²) - d(x) + e
Since P(x) = P(-x), we can equate the two expressions for P(x) and P(-x) to get:
a(x⁴) + b(x⁴) + c(x²) + d(x) + e = a(x⁴) - b(x³) + c(x²) - d(x) + e
Simplifying this equation, we get:
2b(x³) + 2d(x) = 0
Since this equation holds for all values of x, we can set x = 0 to get:
2d(0) = 0
which implies that d = 0. Similarly, setting x = 1, we get:
2b(1³) + 2d(1) = 0
2b = 0
b = 0
To know more about function visit:
https://brainly.com/question/29124137
#SPJ1
For which equation would x = 4 be a solution?
28 – 5.25 x = 2.75
4.25 x + 7 = 24
4.25 x ÷ 8 = 9
7 + 3.25 x = 29
Answer:
4.25 x + 7 = 24
Second choice
Step-by-step explanation:
Plug in x = 4 into each equation and see which one is consistent
The correct answer is 4.25x + 7 = 24
Left side = 4.25(4) + 7
= 17 + 7
=24
which matches the right side 24
how can i slove this??
Answer:
[tex]5x {}^{3} - x + 5x + 2[/tex]
Step-by-step explanation:
Greetings!!!
So to find the sum of (f+g)(x) just simply add these two functions
f(x)+g(x)3x²+5x-2+(5x³-4x²+4)Add like terms together
5x³-x²+5x+2If you have any questions tag it on comments
Hope it helps!!!
Jose and his children went into a grocery store where they sell apples for $2.25 each and mangos for $1.25 each. Jose has $20 to spend and must buy at least 9 apples and mangos altogether. Also, he must buy at least 3 apples and at most 9 mangos. If � x represents the number of apples purchased and � y represents the number of mangos purchased, write and solve a system of inequalities graphically and determine one possible solution.
Answer: $15.25
Step-by-step explanation:
Let x be the number of apples purchased and y be the number of mangos purchased. Then we have the following constraints:
2.25x + 1.25y ≤ 20 (Jose has $20 to spend)
x + y ≥ 9 (Jose must buy at least 9 apples and mangos altogether)
x ≥ 3 (Jose must buy at least 3 apples)
y ≤ 9 (Jose can buy at most 9 mangos)
To solve this system of inequalities graphically, we can plot the relevant lines and shade the feasible region.
First, we graph the line 2.25x + 1.25y = 20 by finding its intercepts:
When x = 0, we have 1.25y = 20, so y = 16.
When y = 0, we have 2.25x = 20, so x = 8.89 (rounded to two decimal places).
Plotting these intercepts and connecting them with a line, we get:
| *
16 | *
|
| /
| /
|/
0 *--------*
0 8.89
Next, we graph the line x + y = 9 by finding its intercepts:
When x = 0, we have y = 9.
When y = 0, we have x = 9.
Plotting these intercepts and connecting them with a line, we get:
|
9 | *
|
| /
| /
|/
0 *--------*
0 9
Finally, we shade the feasible region by considering the remaining constraints:
x ≥ 3: This means we shade to the right of the line x = 3.
y ≤ 9: This means we shade below the line y = 9.
Shading these regions and finding their intersection, we get:
| *
16 | * |
| |
| / |
| / |
|/ |
9 *--------*---
| | /
| |/
| *
0 *--------*
3 8.89
The feasible region is the shaded triangle bounded by the lines 2.25x + 1.25y = 20, x + y = 9, and x = 3.
To find one possible solution, we can pick any point within the feasible region. For example, the point (4, 5) satisfies all the constraints and represents buying 4 apples and 5 mangos, which costs 4(2.25) + 5(1.25) = $15.25.
Emma and Cooper went to Tico’s tacos for lunch. Emma ordered three tacos and one burrito and Cooper ordered one taco and two burritos Emmas order total was $3.65 and Cooper’s bill was $3.30. Write and solve a system of equations to model the situation above. Explain the solution in the context of this problem. Explain, or show your work in the box below.
In the given system of equations one taco costs $0.80 and one burrito costs $0.72.
What is a system of equations?An equation system is a finite collection of equations for which we searched for the common solutions. It is sometimes referred to as a set of simultaneous equations or an equation set. The classification of a system of equations is similar to that of a single equation. In modelling issues where the unknown values may be expressed in the form of variables, a system of equations finds use in everyday life.
Let us suppose the cost of one taco = x.
Let us suppose the cost of one burrito = y.
Then, for Emma we have:
3x + y = 3.65
For Cooper we have:
x + 2y = 3.30
Using elimination, multiply the first equation by 2 and subtract it from the second equation:
(2)(3x + y = 3.65)
6x + 2y = 7.30
x + 2y = 3.30
-5x = -4
x = 4/5
Substituting this value of x into either equation:
3(4/5) + y = 3.65
y = 2.15/3 ≈ 0.72
Therefore, one taco costs $0.80 and one burrito costs $0.72.
Learn more about system of equations here:
https://brainly.com/question/13760328
#SPJ1
If the sum of two numbers is 10 and the product of the numbers is 15, then find the following:
(a) The difference of numbers.
(b) Sum of cube of the numbers.
Answer:
the numbers are
[tex] \sqrt{10} + 5 \\ - \sqrt{10} + 5[/tex]
Step-by-step explanation:
then there difference is
square root of 10 + 5 -(- square root of 10 +5)
=
[tex]2 \sqrt{10} [/tex]
and the cube of there sum is 15^3 = 15* 15* 15
= 3375
The total resistance of a circuit is given by the formula RT = +
R1 = 4 + 6i ohms and R2 = 2 − 4i ohms. What is RT?
The total resistance of the circuit is 6 + 2i.
Resistance is a unit of measurement for the resistance to current flow in an electrical circuit. The Greek letter omega () represents the unit of measurement for resistance, which is ohms.
Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.
The amount of opposition any object applies to the flow of electric current is known as resistance. A resistor is an electrical component utilised in the circuit to provide that particular level of resistance. R = V I is a formula used to calculate an object's resistance.
given :
R1 = (4 + 6i)
R2 = (2 - 4i)
total resistance of the circuit is
R = R1 + R2
= (4 + 6i) + (2 - 4i)
= 6 + 2i
To know more about resistance , click the below link
https://brainly.com/question/30799966
#SPJ4
The equation RT = + R1 = 4 + 6i ohms and R2 = 2 4i ohms, RT = 6 - 2i ohms, determines the circuit's total resistance.
R1 and R2 are added to determine RT: RT = R1 + R2.
The actual components added together give us 4 + 2 = 6.
When we add the fictitious parts, we obtain 6i - 4i = 2i.
RT is thus equal to 6 - 2i ohms.
To put it another way, the circuit's total resistance is a complex number containing a real component of 6 ohms and an imaginary component of -2 ohms. This shows the combined impact of the circuit's resistances R1 and R2. When a constant voltage differential of one volt (V) is supplied to two conductor points and a current of one ampere (A) results, the resistance between those points is measured in ohms. It is comparable to one volt for every ampere (V/A), to put it simply.
learn more about ohms here:
https://brainly.com/question/29750972
#SPJ4
Find the dimensions of the open rectangular box of maximum volume that can be made from a sheet of cardboard 19 in. by 11 in. by cutting congruent squares from the corners and folding up the sides. Then find the volume. The dimensions of box of maximum volume are __ in. (Round to the nearest hundredth as needed. Use a comma to separate answers as needed.)
The dimensions of the open rectangular box of maximum volume that can be made from a sheet of cardboard 19 in. by 11 in. by cutting congruent squares from the corners and folding up the sides are 6.33 in. x 3.33 in. x 5.33 in. The volume of the box is 113.78 in³.
How to find the dimensions of the open rectangular box of maximum volume?The dimensions of the box can be found with the following steps:
First, determine the side length of the square that is to be removed from each corner of the cardboard box. Since this will be done uniformly on all four corners, let the side length be x. The dimensions of the cardboard box can then be written as:
Length = 19 in. - 2x
Breadth = 11 in. - 2x
Height = x
After folding the cardboard along the creases, the base of the rectangular box will be (19 - 2x) in. by (11 - 2x) in. with the height of the box being x in. The volume of the box can then be found by multiplying the base and height of the box, i.e.,
Volume = (19 - 2x) (11 - 2x) x
Let V(x) be the volume of the rectangular box in terms of x. Then:
V(x) = (19 - 2x) (11 - 2x) x
Simplifying,
V(x) = 4x³ - 60x² + 209x
The maximum value of V(x) can be found by differentiating V(x) with respect to x and equating the result to zero. Therefore,
V'(x) = 12x² - 120x + 209 = 0
Solving, V(x) has a maximum value when x = 19/3 - 2(2/3)√14 or x = 19/3 + 2(2/3)√14. The value x = 19/3 - 2(2/3)√14 is the maximum value because x must be less than 5.5, which is the minimum of 11/2 and 19/2 divided by 3, the upper bound for x. Therefore, the dimensions of the box are
Length = 19 - 2(19/3 - 2(2/3)√14) = 6.33 in.
Breadth = 11 - 2(19/3 - 2(2/3)√14) = 3.33 in.
Height = 19/3 - 2(2/3)√14 = 5.33 in.
Thus, the dimensions of the box are 6.33 in. x 3.33 in. x 5.33 in. The volume of the box is:
V = 6.33 x 3.33 x 5.33 = 113.78 in³.
Learn more about maximum volume here: https://brainly.com/question/10373132
#SPJ11
find the smallest value of n that you can for which s n has an element of order greater than or equal to 100
The smallest value of `n` for which `S_n` has an element of order greater than or equal to 100 is 101.
To determine the smallest value of n for which S_n has an element of order greater than or equal to 100, we can use the formula
S_n = n!/r!(n - r)!,
where n is the number of elements in the set, and r is the number of elements being chosen at a time.
Given, S_n has an element of order greater than or equal to 100. The smallest value of n should be determined.
The formula for the number of permutations in a set with n elements is given by, `S_n = n!/r!(n - r)!`
where `n` is the number of elements in the set and `r` is the number of elements being chosen at a time.
The element of order `n` in `S_n` is an `n` cycle. For `n = 100`, we have an element of order 100.
This element can be expressed as `(1 2 3 ... 99 100)`. Thus, `r = 100`.
Substituting these values in the formula of S_n we get, S_n = n!/r!(n - r)! => n!/(100!(n - 100)!)
Now, we have to find the smallest value of n for which S_n has an element of order greater than or equal to 100. If we substitute `n = 100`, then we will have an element of order 100. But the question asks for the smallest value of n. So, if we substitute `n = 101`, we will have an element of order `101`. Hence, the smallest value of `n` for which `S_n` has an element of order greater than or equal to 100 is 101.
To know more about the smallest value: https://brainly.com/question/31133248
#SPJ11
Please help me answer!
As a result, the percentage of adults who selected math is different from the percentage of kids who did.
what is percentage ?As a number out of 100, a percentage is a method to express a proportion or a fraction. It is symbolized by the number %. If there are 25 boys in a class of 100 pupils, for instance, then there are 25% of boys in the class. It is a helpful method to compare quantities and to express changes in values over time.
given
120 80
Total 200
Women Overall Party A Party B
70 60
Overall 130
Therefore, there are 130 ladies in the group.
b) The chart indicates that 70 women plan to support Party A.
Thus, the percentage of adults who selected English was 40% of 48, which is equal to 0.4 times 48 and 19.2 when rounded to the closest whole number.
b) Reeshma is not accurate. The percentage of adults who selected math is 35%, while for children it is 40%, according to the pie chart.
To know more about percentage visit:
https://brainly.com/question/28269290
#SPJ1
The complete question is:- complete the two-way table, which shows the voting intentions of a group of men and women. a How many women are in the group?
Men
Party A Party B 120
Total 200
Women 130
Total 380
b How many women intend to vote for Party A?
2 A group of 48 adults are asked what their favourite subject was at school. They can choose from
maths, English and science.
A group of 32 school children are asked the
same question.
Corey is ready to begin the process of producing his final animation. Unfortunately,
his computer does not have the power to render the final scene, so he outsources
the render to a computer that will execute the function. What method allows him to
do this?
(1 point)
O image sequences
Obatch render
O net rendering
O multi-passing
Net rendering is a method of rendering a computer-generated animation or image on multiple computers over a network.
Net rendering is a method of rendering a computer-generated animation or image on multiple computers over a network. This technique allows a user to take advantage of the computing power of multiple computers to render a scene. To do this, the user would divide the scene into several parts, assigning each part to a different computer. The computers would then render each part of the scene independently, and then the results are combined into a single image. This process can significantly reduce the time required to render a scene, as the workload is distributed over multiple computers. For example, if it would normally take a single computer 10 minutes to render a scene, net rendering could reduce that time to 2 minutes.
Learn more about significantly here:
https://brainly.com/question/14789537
#SPJ1
Determine what number to multiply the first equation by to form opposite terms for the x-variable.
2
5
x + 6y = -10
–2x – 2y = 40
Multiplying the first equation by
will create opposite x terms
To create opposite x terms, we need to multiply the first equation by -5.
How to choose what term to multiply the first equation?
To choose what term to multiply the first equation, we need to consider the coefficients of the variable that we want to eliminate (in this case, the x variable) in both equations. Our goal is to create opposite terms for that variable in the two equations, so that when we add or subtract the equations, that variable will be eliminated.
Determining the number to multiply the first equation by to form opposite terms for the x-variable :
In this case, the coefficient of x in the first equation is 2/5, and the coefficient of x in the second equation is -2.
To create opposite terms for x, we need to find a constant that, when multiplied by the first equation, will result in a coefficient of x that is the negative of the coefficient of x in the second equation (i.e., -2).
To do this, we can divide the coefficient of x in the second equation by the coefficient of x in the first equation, and then multiply the entire first equation by the resulting constant.
In this case, we have:
[tex](-2)/(2/5) = -5[/tex]
Multiplying the first equation by -5 gives:
[tex]-5(2/5)x + (-5)6y = -5(-10)[/tex]
which simplifies to:
[tex]-2x - 30y = 50[/tex]
Now we have two equations with opposite x terms:
[tex]-2x - 4y = 40[/tex]
[tex]-2x - 30y = 50[/tex]
To know more about equations visit :
brainly.com/question/17149704
#SPJ1
use the newton-raphson method to find an approximate value of 3√7 . use the method until successive approximations obtained by calculator are identical. an appropriate function to use for the approximation would be f (x) = A x^2 + B x^3 + C x + D where A= B= C= D=
If c1 = 2, then c2 = ___
2√3= ____
In the morning 134 books were checked out from the library.in the afternoon 254 books were checked out and 188 books were checked out in the evening.how many books were checked out in the library that day?
Answer:
576 books.
Step-by-step explanation:
134+254+188=576 books in total.
Answer:
576
Step-by-step explanation:
This is literally easy!
Checked books are 134 + 254 + 188 = 576
Solve the problems. a) The number a is 4/5 of the number b. What part of number a is number b?
Answer:
Solve the problems. a) The number a is 4/5 of the number b. What part of number a is number b?
Step-by-step explanation:
a) If a is 4/5 of b, then b is 5/4 of a.
To find what part of a is b, we divide b by a:
b/a = 5/4
This means that b is 5/4 times larger than a, or b is 125% of a.
To find what part of a is b, we subtract 1 from this fraction:
b/a - 1 = 5/4 - 1
b/a - 1 = 1/4
So, b is 1/4 of a, or b is 25% of a.
. Mr. Govind coaches cricket at a primary school. In order to not disturb the classes, he takes the children from the class, 6 at a time. During the 45 minutes' session, 2 children bat at a time. All children in the session get an opportunity to bat and every child bats for the same amount of time. How many minutes does each pair get to bat?
Each pair of children gets to bat for 7.5 minutes.
How to find out how much time each pair gets to bat ?To find out how much time each pair gets to bat, we need to divide the total session time by the number of pairs of children who bat.
Number of pairs of children who bat = 6 groups x 1 pair/group = 6 pairs
Total time for the session = 45 minutes
Time per pair of children who bat = Total time / Number of pairs of children who bat
= 45 minutes / 6 pairs
= 7.5 minutes per pair
Therefore, each pair of children gets to bat for 7.5 minutes.
Learn more about divide here : brainly.com/question/27601809
#SPJ1
In culinary class, you made fudge brownies and peanut butter brownies. Each batch of fudge brownies makes 1 pan. Each batch of peanut butter brownies makes 9 pans. The class made 5 batches and ended up with 29 pans. How many batches of each type of brownie were made?
Answer: 4 batches of fudge brownies and 1 batch of peanut butter brownies were made.
Step-by-step explanation:
Let x be the number of batches of fudge brownies made, and y be the number of batches of peanut butter brownies made.
From the problem, we can write two equations based on the information given:
Each batch of fudge brownies makes 1 pan: x = number of pans of fudge brownies.
Each batch of peanut butter brownies makes 9 pans: 9y = number of pans of peanut butter brownies.
We also know that the class made 5 batches in total, and ended up with 29 pans:
x + 9y = 29 (total number of pans)
We can now solve for x and y by using a system of two equations:
x + 9y = 29 (equation 1)
x + y = 5 (equation 2)
Solving for x in equation 2 and substituting into equation 1, we get:
(5 - y) + 9y = 29
Simplifying and solving for y:
8y = 24
y = 3
Substituting y = 3 into equation 2, we get:
x + 3 = 5
x = 2
Therefore, the class made 2 batches of fudge brownies (2 pans) and 1 batch of peanut butter brownies (9 pans), for a total of 29 pans. Alternatively, we can say that the class made 4 batches of fudge brownies (4 pans) and 1 batch of peanut butter brownies (9 pans) for a total of 29 pans.
The number of employees for a certain company has been decreasing each year by 5%. If the company cumently has 860 employees and this rate continues, find the number of employees in 10 years
The number of employees in 10 years will be approximately
(Round to the nearest whole number as needed)
Based on the exponential decay equation, the number of employees for the company that has been decreasing yearly by 5%, will in 10 years be approximately 515.
What is exponential decay equation?The exponential decay equation or function gives the value in t years that has a constant ratio of decrease.
Exponential decay equation is one of the two exponential functions. The other is the exponential growth equation.
The annual decrease in the number of employees = 5%
The current number of employees in the company = 860
The expected time = 10 years.
The exponential decay equation is as follows, y = 860 x 0.95^10.
y = 860 x 0.95^10 = 515
Learn more about exponential functions at https://brainly.com/question/30127596
#SPJ1
My question is,
"The midpoint between x and 27 is -3. Find x."
25 points if you get this correct.
Answer:
The number x that is midway between x and 27, and has a midpoint of -3, is -33
midpoint = (x + 27) / 2
We also know that the midpoint is equal to -3, so we can set these two expressions equal to each other and solve for x:
-3 = (x + 27) / 2
Multiplying both sides by 2 gives:
-6 = x + 27
Subtracting 27 from both sides gives:
x = -33
Create a Dataset Give a positive integer less than 100 as the last data value in each of the following datasets so that the resulting dataset satisfies the given condition (a) The mean of the numbers is substantially less than the median 51,52,53,54 (b) The mean of the numbers is substantially more than the median 2,3,4,5, (c) The mean and the median are equal. 2,3,4,5
(a) Dataset with mean substantially less than median:
9, 10, 11, 12, 90
The mean of this dataset is (9+10+11+12+90)/5 = 26.4, while the median is 11, which is substantially greater than the mean. The last data value is 90, which is a positive integer less than 100.
(b) Dataset with mean substantially more than median:
98, 99, 100, 101, 200
The mean of this dataset is (98+99+100+101+200)/5 = 119.6, while the median is 100, which is substantially less than the mean. The last data value is 200, which is a positive integer less than 100.
(c) Dataset with mean equal to median:
2, 3, 4, 4, 5
The mean of this dataset is (2+3+4+4+5)/5 = 3.6, which is equal to the median (the middle value of the dataset). The last data value is 5, which is a positive integer less than 100.
For more questions like Dataset click the link below:
https://brainly.com/question/26468794
#SPJ11
A granola bar weighs 0.84 ounces. There are 8 bars in a box. What is the
total weight of the granola bars using the correct number of significant digits
it's not 6.72 i need the answer with significant digits
The total weight of the granola bars in the box is 6.7 ounces.
How to find the total weight of the granola barsTo calculate the total weight of the granola bars with the correct number of significant digits, we need to multiply the weight of a single bar by the number of bars in the box.
Given parameters:
Weight of a single bar = 0.84 ouncesNumber of bars in the box = 8Total weight of the granola bars
= Weight of a single bar x Number of bars in the box
= 0.84 ounces x 8
= 6.72 ounces
Since the weight of a single bar is given with two significant digits, and we have multiplied it by a whole number, the answer should be reported with two significant digits.
so we can say that, the total weight of the granola bars is 6.7 ounces.
Learn more about weight calculations at:
https://brainly.com/question/19177598
#SPJ1
