Vector a has a magnitude of 8 and makes an angle of 45 with positive x axis vector B has also the same magnitude of 8 units and direction along the

Answer:

The pressure of water progressively increases as the depth of the water increases. The pressure increases as the depth of a point in a liquid increases. The walls of the vessel in which liquids are held are likewise subjected to pressure. The sideways pressure exerted by liquids increases as the liquid depth increases.

At STP, 1 mole of an ideal gas occupies a volume of about 22.4 L. So if n is the number of moles of this gas, then

n / (19.2 L) = (1 mole) / (22.4 L)   ==>   n = (19.2 L•mole) / (22.4 L) ≈ 0.857 mol

If the sample has a mass of 12.0 g, then its molecular weight is

(12.0 g) / n ≈ 14.0 g/mol

Answer:

a) required area is 1.1318 m²

b) the maximum potential difference that can be applied across the compactor is 1931.1 V

Explanation:

Given the data in the question;

dielectric constant εr = 2.35

distance between plates ( thickness ) d = 0.0785 mm = 7.85 × 10⁻⁵ m

dielectric strength = 49.5 MV/m

a)

given that capacity capacitor C = 0.3 uF = 0.3 × 10⁻⁶ F

To find the Area, we use the following the expression.

C = ε₀εrA / d

we know that The permittivity of free space, ε₀ = 8.854 x 10⁻¹²  (F/m)

we substitute

0.3 × 10⁻⁶ = [ (8.854 x 10⁻¹²) × 2.35 × A  ] /  7.85 × 10⁻⁵

A = [ (0.3 × 10⁻⁶) × (7.85 × 10⁻⁵) ] / [ 2.35 × (8.854 x 10⁻¹²) ]

A = 2.355 × 10⁻¹¹ / 2.08069 × 10⁻¹¹

A = 1.1318 m²

Therefore, required area is 1.1318 m²

b)

the maximum potential difference that can be applied across the compactor.

We use the following expression;

⇒ 1/2 × dielectric strength × thickness d

we substitute

⇒ 1/2 × ( 49.5 × 10⁶ V/m ) × ( 7.85 × 10⁻⁵ m )

⇒ 1931.1 V

Therefore, the maximum potential difference that can be applied across the compactor is 1931.1 V

The frequency is 4,6E14 Hz.

What is the frequency?

Frequency is the fee at which modern changes direction in step with 2nd. it's far measured in hertz (Hz), a worldwide unit of degree wherein 1 hertz is identical to 1 cycle in line with 2d. Hertz (Hz) = One hertz is the same as 1 cycle in step with the second. Cycle = One entire wave of alternating present-day voltage.

Frequency describes the number of waves that pass a hard and fast place in a given quantity of time. So if the time it takes for a wave to skip is half of 2d, the frequency is 2 per 2nd. If it takes 1/one hundred of an hour, the frequency is a hundred in step with hour.

Learn more about frequency here:-https://brainly.com/question/254161

#SPJ2

The magnetic field at 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.

Given;

radius of the circular plate, d = 25 cm = 0.25 m

current in the plate, I = 1.3 A

distance from the center of the circular plate, r = 11 cm = 0.11 m

To find:

The magnetic field from the given distance is calculated as from Biot Savart equation:

[tex]B = \frac{\mu_o I}{2\pi r} \\\\where;\\\\\mu_o \ is \ permeability \ of \ free \ space \ 4\pi \times 10^{-7} \ T.m/A\\\\B = \frac{(4\pi \times 10^{-7} ) \times (1.3)}{2\pi \times 0.11} \\\\B = 2.364 \ \times 10^{-6} \ T[/tex]

Therefore, the magnetic field 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.

Learn more here: https://brainly.com/question/17035710

Answer:

The correct answer is - c.  Spaceship will have a velocity to the East and will be slowing down.

Explanation:

In this case, if turned on thruster #2 then it will exert force on the west side as thruster 2 is on the east side and it can be understood by Newton's third law that says each action has the same but opposite reaction.

As the spaceship engine applies force on the east side then according to the law the exhauster gas applies on towards west direction. It will try to decrease the velocity of the spaceship however, the direction of floating still be east side initally.

Answer:

enchantment table language

Explanation:

Explanation:

N2 + H2 --> NH3

balance them:

N2 + 3 H2 --> 2 NH3

so if 6 moles of N2 react, 12 moles of NH3 will form.

(you have to look at the big number in front, in this case its N2 and 2 NH3, therefore the amount of N2 will produce double the amount of NH3 )

Answer:

233.33°F

Explanation:

(385K - 273.15) * 9/5 + 32 = 233.33°F

Answer:

1.84 hours

I hope it's helps you

Answer:

The speed of proton is 2.1 x 10^5 m/s .

Explanation:

potential difference, V = 234 V

let the initial speed of the proton is v.

The kinetic energy of proton is

KE = q V

[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]

Answer:

The mass of the second block=0.457 kg

Explanation:

We are given that

m1=1.5 kg

v1=1.3m/s

v2=4.3 m/s

V=2.0 m/s

We have to find the mass of the second block.

[tex]m_1v_1+m_2v_2=(m_1+m_2)V[/tex]

Let m2=m

Substitute the values

[tex]1.5(1.3)+m(4.3)=(1.5+m)(2)[/tex]

[tex]1.95+4.3m=3+2m[/tex]

[tex]4.3m-2m=3-1.95[/tex]

[tex]2.3m=1.05[/tex]

[tex]m=\frac{1.05}{2.3}[/tex]

[tex]m=0.457 kg[/tex]

Hence,  the mass of the second block=0.457 kg

Explanation:

Hey there!

According to the question;

A person can lift mass of 60 kg on earth.

mass(m1) = 60kg

acceleration due to gravity on earth (a) = 9.8m/s²

Now;

force (f) = m.a

= 60*9.8

= 588 N

Since, there is application of same magnitude of force on moon,

mass(m) =?

acceleration due to gravity on moon (a) = 1.67m/s²

Now;

force (f) = m.a

588 = m*1.67

m = 352.09 kg

Therefore, the person who can lift the mass of 60 kg on earth can lift mass of 352 kg on moon.

Hope it helps!

Answer:

Explanation:

The law of reflection says that the reflected angle (measured from a vertical line to the surface  called the normal) is equal to the reflected angle measured from the same normal line.

All other properties of reflection flow from this one statement.

Answer:

4

Explanation: