Answer:
The answer is Community
Explanation:
If you discover a new element, how would you know where it should go on the periodic table
Answer:
the atomic number
Explanation:
it would be in the upper corner
Which safety procedure could prevent an accident?
using a fire extinguisher
using glass without chips or cracks
smelling a mixture of chemicals
getting a bandage out of the first aid kit when bleeding
Answer:
B
Explanation:
Describe the subatomic particles found in an atom, and
describe each one. Also, describe how they relate to each
other.
pls helpp <3
How is the rock in the deep mantle similar to the rock in the parts of the mantle nearest the surface? How is it different?
Answer:
Similarity: Rocks within the mantle contain more magnesium and iron than the ones in the crust.
Difference: Rocks in the deep mantle are under intense heat and pressure. In this case, they are semi-solid rocks that flow slowly. On the other hand, the part of the mantle that is nearest to the surface consists of rigid rocks. It has a lower temperature than the rocks in the deep mantle.
Explanation:
Rocks within the mantle contain more magnesium and iron than the ones in the crust.
What is Rocks?
Rocks in the deep mantle are under intense heat and pressure. In this case, they are semi-solid rocks that flow slowly.
On the other hand, the part of the mantle that is nearest to the surface consists of rigid rocks. It has a lower temperature than the rocks in the deep mantle.
According to geologists, a rock is a naturally occurring material made up of crystalline crystals of various minerals that have fused together to form a solid mass.
Therefore, Rocks within the mantle contain more magnesium and iron than the ones in the crust.
To learn more about rocks, refer to the link:
https://brainly.com/question/19930528
#SPJ2
List 3 particles of an atom (w/their symbol & charge)
Answer:
there are three fundamental particles of atom
which are :
proton ( positively charged (+) )electron ( negatively charged ( - ) )neutron ( having no charge on it ( neutral ))Particle Symbol
electron =》e-
proton =》p+
neutron =》n°
Moraines left by glaciers are different from deposits left by rivers because the rocks left behind are _____.
Explanation:
unorganized and unsorted i think this is the answer
The ions S-2, Cl-1, K+, Ca+2, Sc+3 have the same total number of electrons as the noble gas argon. How would you expect the radii of these ions to vary?
Answer:
Cl^- <S^2-<Sc^3+ <Ca^2+<K^+
Explanation:
We know that ionic radius of ions decreases from right to left in the periodic table. This is because, ionic radii decreases with increase in nuclear charge. This explains why; Sc^3+ <Ca^2+<K^+.
Secondly, even though Cl^- is isoelectronic with S^2-, the size of the nuclear charge in Cl^- is larger compared to that of S^2- . Hence Cl^- is smaller than S^2- in ionic radius owing to increased nuclear attraction in Cl^-.
Which term is defined as the region in an atom where an electron is most likely to be
located?
1.
nucleus
2.
orbital
3.
quanta
4.
spectra
Answer:
"2.Orbital." I think
Explanation:
Risk*
Air has
A. a definite volume but not a definite shape
B. a definite shape but not a definite volume.
C. no definite volume or shape.
D. both a definite shape and a definite volume.
Answer would be neither!
The reason being that it can take the shape and volume of anything.
Answer:
Neither
Explanation:
1. __N2 + __H2-> __NH3
2. __Fe + __HCl-> __H2 + __FeCl3
Answer:
N2+ 3H2－> 2NH3
2Fe + 6HCl －> 3H2 + 2FeCl3
When 3243. grams of iron (III) chloride are reacted with 511.8 grams of hydrosulfuric acid, which is the limiting reactant?
2 FeCl3 + 3 H2S -----> Fe2S3 + 6 HCl
Answer:
Hydrosulfuric acid will act as limiting reactant.
Explanation:
Given data:
Mass of iron(III) chloride = 3243.0 g
Mass of hydrosulfuric acid = 511.8 g
Limiting reactant = ?
Solution:
Chemical equation:
2FeCl₃ + 3H₂S → Fe₂S₃ + 6HCl
Number of moles of iron(III) chloride:
Number of moles = mass/molar mass
Number of moles = 3243.0 g/ 162.2 g/mol
Number of moles = 20 mol
Number of moles of hydrosulfuric acid:
Number of moles = mass/molar mass
Number of moles = 511.8 g/ 34.1 g/mol
Number of moles = 15 mol
Now we will compare the moles of both reactant with products
FeCl₃ : Fe₂S₃
2 : 1
20 : 1/2 ×20 = 10
FeCl₃ : HCl
2 : 6
20 : 6/2 ×20 = 60
H₂S : Fe₂S₃
3 : 1
15 : 1/3 ×15 = 5
H₂S : HCl
3 : 6
15 : 6/3 ×15 = 30
Hydrosulfuric acid producing less number of moles of product thus, it will act as limiting reactant.
Write one paragraph to summarize Strengths and Weaknesses of Acids and Bases.
Answer:
Explanation: I can't give you the answer you with the sentence but i will help you the best i can
One qualitative measure of the strength of an acid or a base solution is the pH scale A logarithmic scale that relates the concentration of the hydrogen ion in solution.
Can somebody plz help answer this question correctly thank you! ONLY 1-2 sentences is good thanks!
WILL MARK BRAINLIEST WHOEVER ANSWERS THIS QUESTION :DDD
to generate energy means to create energy. chemical energy is the energy that is created when you put effort into doing something..
An object has a mass of 26.94 grams and a volume of 2.568 cubic centimeters. What material is it likely to be
made of?
Substance iron gold silver copper
Density (g/cm) 7.874 19.32 10.49 8.92
a. Silver
c. Iron
b. Gold
d. Copper
Answer:
a) silver
Explanation:
Given data:
Mass of object = 26.94 g
Volume of object = 2.568 cm³
Which subject is this = ?
Solution:
Formula:
d = m/v
by putting values
d = 26.94 g/ 2.568 cm³
d = 10.49 g/cm³
Densities of objects: g/cm³
iron = 7.874
gold = 19.32
silver = 10.49
copper = 8.92
Thus, given object is silver.
how many atoms are in 1.50 moles of He?
Explain five physical and/or chemical properties that you need to consider for the substances before using them as construction materials for buildings
Answer: There are many properties of a metal which is taken into consideration when it is used for construction
Explanation:
The properties can be physical, chemical, et cetera. The physical properties that is considered are:
1. Durability: It can be defined as the property of the material to withstand the atmospheric pressure and other factors.
2. Density: The ratio of mass by volume of a material (homogeneous material) is called as density.
3. Fire resistance: The ability of the material to withstand in fire without changing its size or shape.
4. Weather resistance: The ability of the material to withstand the weather which could be variable round the year.
5.Water absorption: The ability of the material to absorb water and retain it.
How would you describe the appearance of homogeneous mixture? A. Homogeneous mixtures do not have a uniform composition. B. Homogeneous mixtures have a uniform appearance. C. Homogeneous mixtures are not distributed evenly. D. Homogeneous mixtures have two phases
Answer:
i think its c somebody correct me if im wrong. but hope this help
Explanation:
PLEASE HELP I added some food coloring to some water. The water changed color, but
It's still the same water that I can drink. This is an example of ??
A. Chemical Change
B. Physical Change
Answer:
its definitely a physical change as the way you see it now is different then before
Answer:
b
Explanation:
because it changed colors
How is carbon(C)-14 is different from carbon(C)-12?
Explanation:
Carbon-12 and carbon-14 are two isotopes of the element carbon. The difference between carbon-12 and carbon-14 is the number of neutrons in each of their atoms. Atoms of both isotopes of carbon contain 6 protons. Atoms of carbon-12 have 6 neutrons, while atoms of carbon-14 contain 8 neutrons.
In which highlighted section of the periodic table in the diagram provided above are the elements whose atoms have 1 valence electron located?
A) a
B) b
C) c
D) d
Answer:
B.
Explanation:
What number do we use to represent the connection of a solid, liquid, or solvent?
Answer:Molarity tells us the number of moles of solute in exactly one liter of a solution. (Note that molarity is spelled with an "r" and is represented by a capital M.) We need two pieces of information to calculate the molarity of a solute in a solution: The moles of solute present in the solution
Explanation:
what type of heat transfer takes place when you come in contact with a snow flake on a cold day?
Answer:
Conduction
Explanation:
Conduction is how heat transfers through direct contact with objects that are touching. Any time that two objects or substances touch, the hotter object passes heat to the cooler object.
Answer:
Conduction
Explanation:
Conduction is how heat transfers through direct contact with objects that are touching. Any time that two objects or substances touch, the hotter object passes heat to the cooler object.
Structural formula of 2 ethyl, 4 methyl-Heptane
List four greenhouse gases in the atmosphere. For each gas, describe its prevalence in the atmosphere, its natural sources, its human-induced sources, and how its concentration in the atmosphere might be changing.
Answer: Carbon Dioxide, Methane, Nitrous Oxide and Fuorinated Gases
Explanation:Carbon dioxide (CO2): Carbon dioxide enters the atmosphere through burning fossil fuels (coal, natural gas, and oil), solid waste, trees and other biological materials, and also as a result of certain chemical reactions (e.g., manufacture of cement). Carbon dioxide is removed from the atmosphere (or "sequestered") when it is absorbed by plants as part of the biological carbon cycle.
Methane (CH4): Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices and by the decay of organic waste in municipal solid waste landfills.
Nitrous oxide (N2O): Nitrous oxide is emitted during agricultural and industrial activities, combustion of fossil fuels and solid waste, as well as during treatment of wastewater.
Fluorinated gases: Hydrofluorocarbons, perfluorocarbons, sulfur hexafluoride, and nitrogen trifluoride are synthetic, powerful greenhouse gases that are emitted from a variety of industrial processes. Fluorinated gases are sometimes used as substitutes for stratospheric ozone-depleting substances (e.g., chlorofluorocarbons, hydrochlorofluorocarbons, and halons). These gases are typically emitted in smaller quantities, but because they are potent greenhouse gases, they are sometimes referred to as High Global Warming Potential gases ("High GWP gases").
How would you do this
The empirical formula = the molecular formula = C₁₀H₂₀O
Further explanationGiven
m = 0.15 g menthol
V = 0.0337 L
T = 150 +273 = 423 K
P = 100.2 kPa =0.99 atm
Required
molar mass
The molecular formula
Solution
Ideal gas law :
PV=nRT
n=PV/RT
n=0.99 x 0.0337/0.082 x 423
n=9.6 x 10⁻⁴
n = mass/Molar mass
Molar mass = mass/n
Molar mass = 0.15/9.6 x 10⁻⁴
Molar mass = 156.25 g/mol
The empirical formula of Menthol : C₁₀H₂₀O
(The empirical formula)n= molecular formula
(C₁₀H₂₀O)n=156.25
(12.011.10+1,007.20+15,999)n=156.25
(156.25)n=156.25
n=1
Need an answer asap plzzzzzzzzzzzzzzzzzzz!
Which characteristic do euglenoids and algae share?
Both are fungus-like protists.
Both can be autotrophic.
Both have whip-like tails.
Both are decomposers.
To solve this we must be knowing each and every concept related to autotroph. Therefore, eugenides and algae, both can be autotrophic. The correct option is option B.
What is autotroph?An creature that can make its own sustenance out of inorganic materials is known as an autotroph. Contrarily, heterotrophs are species that can't make their own nutrition and must eat other organisms in order to survive.
In contrast to autotrophs, heterotrophs are unable to manufacture their own nourishment. Heterotrophs need to consume organic material in order to produce the nutrients needed for life, not inorganic. Eugenides and algae, both can be autotrophic.
Therefore, Eugenides and algae, both can be autotrophic. The correct option is option B among all the given options.
To know more about autotroph, here:
https://brainly.com/question/15458607
#SPJ6
Explain, in terms of energy changes, why methane is used as a fuel.
Compare and contrast atoms and molecules. Cite specific examples from the readings, as well as what you may already know, to support your comparison.
Answer:
The main difference between an atom and a molecule lies in the size: while the atom is the smallest unit into which matter can be divided into any of its states, a molecule is the union of a group of atoms, that is, this composed of several atoms. Thus, for example, a water molecule is composed of two hydrogen atoms and one oxygen atom (H2O). Therefore, it can be said that atoms are the smallest unit in which the chemical elements of the world can be divided, while molecules are the particles of matter that are formed through the combination of these elements.
What is the percent composition of Phosphorus in Li3PO3
Answer:
you will get 17.983 g of lithium for every 100 g of lithium phosphate.
Explanation:
69.7% is the percent by mass of Lithium in Li[tex]_3[/tex]PO[tex]_3[/tex]. A percent is obtained by multiplying the result by 100.
One approach to show the concentration for an element within a compound or component in a combination is as a mass percentage. The mass percentage is computed by dividing the total weight of the combination by the mass of each component and multiplying the result by 100%. The mass percent is calculated by dividing the mass that contains the compound and solute by the mass for the element or solute.
99.795g/mol = molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex]
6.94g/mol = molar mass of Li
mass percentage of Li=(molar mass of Li/molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex])× 100
=(6.94/99.7)× 100
=69.7%
To know more about mass percentage, here:
brainly.com/question/32197511
#SPJ6
