Answer:
it's B(Energy source,conductor and receiver)
Please help me out this is a test.
The imaje shows a plate baundary. Arrows have been added to indicate the movement if the plates.
What volume of solution is required to produce a 7.8M solution containing 23.6g of LiBr?
Answer:
34.9 mL
Explanation:
First we convert 23.6 g of LiBr into moles, using its molar mass (86.845 g/mol):
23.6 g ÷ 86.845 g/mol = 0.272 mol LiBrNow we can calculate the required volume, using the definition of molarity:
Molarity = moles / litersliters = moles / Molarity0.272 mol / 7.8 M = 0.0349 LWe can convert L into mL:
0.0348 L * 1000 = 34.9 mLPLZ HELP! QUESTION IS BELOW! :D
Answer:
Explanation:
When we say anything is a wave, what exactly do we mean? The most intuitive and straightforward wave to envision is a water wave. A motion, more specifically, is a disturbance that propagates or travels away from its source. Water waves are caused by a disruption in the water's surface, such as a rock tossed into a pond or a swimmer splashing the surface continuously. The noise for sound waves is a rise of air pressure, which may be caused by the oscillating cone within a speaker. There are many kinds of disturbances in earthquakes, including surface disturbances and pressure disturbances under the surface. Even radio signals are best deciphered by using a comparison of sea waves Water waves are helpful to visualize since they are more than just a mental picture. The amplitude, period, frequency, and energy of water waves are all the same as they are for all waves. A small set of underlying principles can be used to describe all wave characteristics.
(hope this helps can i plz have brainlist :D hehe)
An unknown amount of Al203 decomposed producing 215 g of solid aluminum. 2Al2O3=4Al+3O2 How many grams of oxygen gas should be produced
Answer:
191.11 grams of oxygen gas should be produced.
Explanation:
The balanced reaction is:
2 Al₂O₃ → 4 Al + 3 O₂
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Al₂O₃: 2 molesAl: 4 molesO₂: 3 molesBeing the molar mass of each compound:
Al₂O₃: 102 g/moleAl: 27 g/moleO₂: 32 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Al₂O₃: 2 moles* 102 g/mole= 204 gramsAl: 4 moles* 27 g/mole= 108 gramsO₂: 3 moles* 32 g/mole= 96 gramsThen you can apply the following rule of three: if by stoichiometry 108 grams of aluminum are produced along with 96 grams of oxygen, 215 grams of aluminum are produced along with how much mass of oxygen?
[tex]mass of oxygen=\frac{215 grams of aluminum*96 grams of oxygen}{108grams of aluminum}[/tex]
mass of oxygen= 191.11 grams
191.11 grams of oxygen gas should be produced.
Which type of ion usually undergoes reduction?
No ion
All ions
Anion
Cation
Answer:
anion
Explanation:
anion undergoes reduction.
cation undergoes oxidation.
The ions are categorized according to the process of oxidation and reduction. The ion usually undergoes reduction is an anion.
What is reduction?A process involving the partial or complete gain of electrons and loss of oxygen. The ions acquire a net negative charge on them.
Thus, anions usually undergo a reduction.
Learn more about Reduction.
https://brainly.com/question/14698511
#SPJ2
What is the volume, in liters, of 2.75 grams of fluorine gas at 35.0°C and 4.55 atm pressure?
The volume (in litres) of 2.75 g of fluorine gas at 35 °C and 4.55 atm is 0.402 L
How to determine the mole of fluorine gasMass of F₂ = 2.75 gMolar mass of F₂ = 2 × 19 = 38 g/mol Mole of F₂ =?
Mole = mass / molar mass
Mole of F₂ = 2.75 / 38
Mole of F₂ = 0.0724 mole
How to determine the volume Temperature (T) = 35 °C = 35 + 273 = 308 KPressure (P) = 4.55 atmGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) = 0.0724 moleVolume (V) =?Using the ideal gas equation, the volume of the gas can be obtained as follow:
PV = nRT
Divide both side by P
V = nRT / P
V = ( 0.0724 × 0.0821 × 308) / 4.55
V = 0.402 L
Learn more about ideal gas equation:
https://brainly.com/question/4147359
What is the name
of the reigning
theory about the
origins of the
universe?
Answer:
please follow me
Explanation:
eyye6ww6yeyosuyoyo6owy
An eraser is an example of —
Group of answer choices
an insulator
a closed circuit
a conductor
an open circuit
Answer:
Insulator
Explanation:
An eraser can't conduct electricity, which makes it an insulator.
Why do you think it is important for plants to be able to regulate the level of water in their bodies
Answer:
Plants need to regulate the level of water in their bodies in order to be able to carry out several essential processes like photosynthesis and respiration as well as maintain cell turgidity, without which the plant will not survive in its given environment.
Explanation:
The ability of plants to regulate the amount of water in their bodies is known as water balance.
Plants need water in order to carry out many of their essential life functions such as photosynthesis, respiration, nutrition,etc. They also need water in order to order to maintain cell turgidity which serves to support the plant and keep them upright in order for them to absorb sunlight for photosynthesis. Water is also needed in cell division and growth in plants. Without water the plant would not survive, as it would not be able to carry out these essential life processes.
Water balance in plants is maintained through the process of transportation. Transpiration is the process by which water leaves the plant by evaporation through its leaves. When there is an excess of water absorbed by the plant through its root hairs, the rate of transpiration in plant increases. However, when there is little quantity of water available for the plant to use for its cellular processes, the rate of transportation reduces. The opening and closing of the stomata in the leaves of plants regulates the process of transportation.
Which of the following is the best example of a symbiotic relationship?
Certain breeds of fish will often clean bigger fish. The cleaner fish gets food, the bigger fish gets a cleaning.
or
A foolish man decides to go swimming in shark-infested waters. As a result, he is bitten by a shark looking for food.
or
A pair of birds fight over a piece of food. The dominant bird wins.
or
The climate changes. As a result, hundreds of species become extinct and the land turns into a desert.
?
Answer:
Certain breeds of fish will often clean bigger fish. The cleaner fish gets food, the bigger fish gets a cleaning.
I'm not too sure.
Good luck! <3
Scientific notation of 0.00003
0.00003 in scientific notation would be 3 × 10⁻⁵.
The scientific notation of a number is represented as a coefficient multiplied by 10 raised to an appropriate exponent. 0.00003 can be expressed in scientific notation as [tex]3\times 10 ^{-5}[/tex].
Scientific notation is a simple and standardised approach to express extremely big or extremely small numbers. Its foundation is the idea that a number can be expressed as a coefficient times a power of 10. The exponent indicates how many places the decimal point must be moved to get the original value, while the coefficient is normally an integer between 1 and 10 (inclusive of 1 but exclusive of 10). To write 0.00003 in scientific notation, we need to move the decimal point five places to the right to make the coefficient between 1 and 10. 0.00003 can be expressed in scientific notation as [tex]3\times 10 ^{-5}[/tex].
To know more about scientific notation, here:
https://brainly.com/question/19625319
#SPJ6
Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. Circle True or False.
The answer is true, yw.
Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. This statement is true.
What are conifers ?Conifers are a type of gymnosperm plants bearing cone like structures in which the seeds are located. Don't be fooled by the fact that coniferous woods are widespread around the world. Some of the wildest trees in the world can be found there.
Hyperion, a coastal redwood tree, is the tallest tree in the world, reaching a height of 379 feet, equivalent to a 35-story structure. From Siberia to Canada, coniferous rainforest biomes can be found. They have cold winters and warm to hot summers.
Temperatures in coniferous forests are quite low all year long. Summertime temperatures range from -7°C to 21°C, while the average wintertime temperature ranges from -54°C to -1°C. Hence, the statement is true.
Find more on conifers:
https://brainly.com/question/30415885
#SPJ6
This gland of the endocrine and digestive systems produces insulin to help control the body's sugar levels and enzymes which aid in digestion.
Answer:
Pancreas.
Explanation:
Living systems are self-organized life forms and are known to be very much interactive with their surroundings or environment. Also, living systems are dependent on the flow of information, matter and energy at various levels.
Some examples of living systems in organisms are respiratory system, nervous system, digestive system, and circulatory system.
Additionally, living systems comprises of the following components; cells, organs, muscle, tissues, blood, etc.
An endocrine system refers to a series of ductless glands and organs responsible for the production and secretion of hormones that are used by the body for the performance of various functions such as metabolism, controlling growth, reproduction, mood, sleep, etc. These hormones are secreted directly into the circulatory system (blood) and then transported to the organs and tissues in the body.
Pancreas is one of the glands of the endocrine and digestive systems that produces insulin to help control the body's sugar levels and enzymes which aid in digestion.
What is the heat capacity of a substance in which 1050 grams will rise in temperature from 30.4°C to 25.7°C when it absorbs 2880 joules of heat?
Answer:
0.584 J/g°C
Explanation:
Using the formula as follows;
Q = m × c × ∆T
Where;
Q = amount of heat (joules)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
According to the information in this question;
mass of substance (m) = 1050g
Initial temperature = 25.7°C
Final temperature = 30.4°C
amount of heat (Q) = 2880J
change in temperature (∆T) = (30.4°C - 25.7°C) = 4.7°C
Using Q = m.c.∆T
c = Q ÷ m∆T
c = 2880 ÷ (1050 × 4.7)
c = 2880 ÷ 4935
c = 0.584 J/g°C
The specific capacity of the substance is 0.584 J/g°C.
PLEASE HELP!!!!! 10 POINTS!!
What electron could have quantum numbers n=3, l=0, ml=0, ms=-1/2
Answer:
Explanation:
It is a 3s electron
Fluorine, chlorine, and bromine react with gold.
which 1 of the 3 elements will be the most reactive with gold
thanks
Answer:
gold i believe or possibly bromine
Explanation:
q- how does fluorine react with gold
a- this fluoride compound features gold in its highest known oxidation state. this red solid dissolves in hydrogen fluoride, but these solutions decompose, liberating fluorine.
q- how does chlorine react with gold
a- gold does react with halogens. it'll, for example, react very slowly with chlorine gas at room temperature to form gold chloride, AuCl3. if gold chloride is heated gently, it will decompose to release the pure elements again.
q- how does bromine react with gold
a- gold in bromine solutions dissolves according to electrochemical/chemical (EC) mechanisms. ... in the chemical composition of the mechanism, this monovalent gold bromide disproportionate into gold and stable AuBr −4 , which reports into solution. with respect to pH, there are two characteristic dissolution regions.
** sorry that i can't provide a sure answer**
good luck :)
i hope this helps
have a nice day!
Fluorine will be most reactive with gold.
What is fluorine?
Of almost all of the elements, fluorine seems to be the most electronegative as well as reactive. Fluorine would be a diatomic, pale yellow, extremely corrosive, combustible gas with a strong smell. The lightest halogen would that be. It produces oxygen and even the incredibly corrosive hydrofluoric acid when it combines strongly with water.
What is reactive?Reactivity would be a substance's capacity to chemically combine with several other substances. Iron, for instance, reacts vigorously with oxygen.
As you move down the group, the halogens, which are non-metal elements in Group 7, become less reactive. In contrast to the alkali metals within Group 1 of the particular periodic table, this trend is the opposite. One of the most reactive elements in Group 7 was fluorine.
To know more about fluorine.
https://brainly.com/question/1940697
#SPJ3
If 12 moles of Al2O3
are produced, how many moles of aluminum reacted?
Answer:
if 12 moles are produced then it came 24 moles of Al(OH)3
Explanation:
The number that is written in front of the molecule is called stoichiometry, represents the number of mole of that molecule. 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
What is stoichiometry?Stoichiometry is a part of chemistry that help us in making relationship between reactant and product from quantitative aspects. It tells about how much part of reactant will be required to produce particular product. Unitary method is always applied in case of stoichiometry chemistry.
The balanced equation is
[tex]4Al+3O_{2}\rightarrow 2Al_{2}O__{3}[/tex]
The mole ratio between [tex]Al_{2}O__{3}[/tex] and Al is 2:4, means to produce 4 moles of [tex]Al_{2}O__{3}[/tex] we need 2 moles of Aluminum
4 mole of [tex]Al_{2}O__{3}[/tex]= 2 moles of Aluminum
1 mole of [tex]Al_{2}O__{3}[/tex]=(1÷2) moles of Aluminum
12 moles of [tex]Al_{2}O__{3}[/tex]= 24 mole of Aluminum
Therefore 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
To learn more about stoichiometry, here:
https://brainly.com/question/28780091
#SPJ2
What is the pH of 4.3x10^-7 M solution of H2CO3?
A.)7
B.)4.3
C.)6.4
D.)7.6
ASAP PLS
Answer:
pH = -log[H⁺] = -log(4.75 x 10⁻⁷) = -(- 6.32 ) = 6.32
Explanation:
Given 4.3 x 10⁻⁷M H₂CO₃ (Ka1 = 4.2 x 10⁻⁷ & Ka2 = 4.8 x 10⁻¹¹)
Note: The Ka2 value for the 2nd ionization step is so small (Ka2 = 4.8 x 10⁻¹¹) It will be assumed all of the hydronium ions (H⁺) come from the 1st ionization step.
1st Ionization step
H₂CO₃ ⇄ H⁺ + HCO₃⁻
C(initial) 4.3 x 10⁻⁷ 0 0
ΔC -x +x +x
C(final) 4.3 x 10⁻⁷ - x x x
Note: the 'x' value in this analysis can not be dropped as the Conc/Ka value is less than 10². In this case he C/Ka ratio* (4.3E-7/4.2E-7 ≈ 1) is far below 10².
So, one sets up the equilibrium equation to be quadric and the x-value can be determined.
Ka1 = [H⁺][HSO⁻]/[H₂SO₃] = (x)(x)/(4.3 x 10⁻ - x) = x²/(4.3 x 10⁻⁷ - x) = 4.2 x 10⁻⁷
=> x² = 4.2 x 10⁻⁷(4.3 x 10⁻⁷ - x)
=> x² + 4.2 x 10⁻⁷x - 1.8 x 10⁻¹³ = 0
a = 1, b = 4.2 x 10⁻⁷, c = - 1.8 x 10⁻¹³
x = b² ± SqrRt(b² - 4(1)(-1.8 x 10⁻¹³ / 2(1) = 4.75 x 10⁻⁷
x = [H⁺] = 4.75 x 10⁻⁷
pH = -log[H⁺] = -log(4.75 x 10⁻⁷) = -(- 6.4 ) = 6.4
______________________
* The Concentration/Ka-value is the simplification test for quadratic equations used in Equilibrium studies. If the C/Ka > 100 then one can simplify the C(final) by dropping the 'x' if used in this type analysis. However, if the C/Ka value is < 100 then the x-value must be retained and the solution is determined using the quadratic equation formula.
for ax² + bx + c = 0
x = b² ± SqrRt(b² - 4ac) / 2a
The volume of a gas is 550 mL at 960 mm Hg and 200.0 C. What volume
would the pressure of the gas be 830 mm Hg if the temperature is reduced
to 150.0C? Make sure your answer is rounded to nearest whole number
and your final answer has the units of mL. *
Answer:
The volume will be 568.89 mL.
Explanation:
Boyle's law says that "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
or P * V = k
Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. That is, the pressure of the gas is directly proportional to its temperature. Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T}=k[/tex]
Where P = pressure, T = temperature, K = Constant
Finally, Charles's law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T}=k[/tex]
Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:
[tex]\frac{P*V}{T} =k[/tex]
Studying an initial state 1 and a final state 2, it is fulfilled:
[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]
In this case:
P1= 960 mmHgV1= 550 mLT1= 200 C= 473 K (being 0 C=273 K)P2= 830 mmHgV2= ?T2= 150 C= 423 KReplacing:
[tex]\frac{960 mmHg*550 mL}{473K} =\frac{830 mmHg*V2}{423 K}[/tex]
Solving:
[tex]V2=\frac{423 K}{830 mmHg} *\frac{960 mmHg*550 mL}{473K}[/tex]
V2= 568.9 mL
The volume will be 568.89 mL.
An unknown amount of sodium azide (NaN3) reacts and produces 0.033 moles of nitrogen gas. What mass of sodium metal is produced
Answer:
Mass of sodium metal is 130.87 gram
Explanation:
The complete reaction is
2 NaN3 --> 2 Na + 3 N2
We know that PV = nRT
n = [tex]\frac{PV}{RT}[/tex]
On substituting the given values, we get
[tex]n = \frac{\frac{99707}{101325}*75 }{0.082 *(273.15 +15)} \\n = 3.02[/tex]moles of N2
Sodium azide's molar mass
3.02 *(2/3) = 2.013 moles
Mass = 2.03 * 65.01 = 130.87 gram
12. In which equilibrium system will an increase in pressure cause a shift to the left?
A) C + O2(8) + CO2(8)
C) 2 Mg(s) + O2(8) + 2 MgO)
B) CaCO3s) <> CaO + CO2g)
D) 2 H2(g) + O2(g) + 2 H2O)
D is the answer cause two h20 + o2(g)
Which of the following are also compounds? Select all that apply.
A.
CuFeS2
B.
H2O
C.
KCl
D.
Mg
E.
Cl
Answer:
option B,C and A are compound
Which pair of compounds represents one Arrhenius acid and one Arrhenius base?
1. CH3OH and NaOH
2. HNO3 and NaOH
3. CH3OH and HCI
4. HNO3 and HCI
Answer: C HNO3 and NaOh
Explanation:
how do you rewrite 4 5/7 as an improper fraction. in steps
please don't use files they don't work
Answer:
33/7
Multiply the denominator of the fraction by the whole number.
Add this result to the numerator of the fraction
answer becomes the numerator of the improper fraction.
Explanation:
Answer:
33/7
Explanation:
1. take the fraction and multiply the denominator by 4 to get 28
2. add the numerator to that... 28+5=32
Exothermic reactions have _____ net bond energy.
A) positive
B) negative
C) neutral
Type the correct answer in each box.
Balance the equation.
_____SiO2 + ______CaC2 → _____Si + _______CaO + _____CO2
The balanced equation of the given reaction is as follows: 5SiO2 + 2CaC2 → 5Si + 2CaO + 4CO2.
How is an equation balanced?A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation is the same.
According to this question, a chemical reaction between quartz and calcium chloride is given to produce silicon, calcium oxide and carbon dioxide.
The balanced equation that represents an equal number of atoms on both sides is as follows:
5SiO2 + 2CaC2 → 5Si + 2CaO + 4CO2
Learn more about balanced equation at: https://brainly.com/question/7181548
#SPJ1
Please please please please please please help me a b c or d
Answer:
the answer is d
Explanation:
hopes this helps
I need help with science: Which picture best shows a loud, low-pitched sound?
Image A shows a loud and low-pitched sound.
What is the frequency?
The term frequency refers to the number of waves that pass a fixed point in unit time.
High pitched sound is of higher frequency because they make the air molecules vibrate much faster than low-pitched sound. Due to their high frequency, their wavelength is shorter (Remember wavelength and frequency are inversely proportional). Vice versa is true to the low-pitched sound. They vibrate air molecules slower than high-pitched sound. Their wavelength is longer and frequency smaller.
Hence, option A is the correct answer.
Learn more about frequency here:
https://brainly.com/question/3280221
#SPJ2
How many moles of C6H12O6 does 8.2 x 1023 molecules represent
Answer:
i.e. mass of 1 mole of glucose, C6H12O6 = (6 × 12.01 + 12 × 1.01 + 6 × 16.00) g = 180.18 g (using atomic weight data to 2 decimals) 1 mole of carbon atoms weighs 12.01 g and there are 6 moles of C atoms in 1 mole of glucose, so the mass of carbon in 1 mole of glucose = 6 × 12.01 g = 72.06 g.
Please help. I need help with all 4