Which of the following molecules has a central atom with precisely two unshared
pairs of electrons?
What is the density of a block with a volume of 5 cm3 and a mass of 20 g?
Answer: 4g/cm^3 or 4000g/L (4kg/L)
Explanation:
I'm not sure what units the question intended so I put both. For the first one, the equation for density is mass/volume so I divided the 20g by 5cm^3 to get 4g/cm^3. Just in case those aren't the intended units for volume and is instead liters, one cm^3 equals one ml. In addition, there are 1000ml in every liter so you can determine the amount per liter by multiplying 4g/ml by 1000 to get 4000g/L or 4kg/L.
I hope this helps.
To make a balanced equation, 6 H2O + 6 CO2 ---> C6H12O6 + _
Answer:
6O₂
General Formulas and Concepts:
Chemistry/Biology
Photosynthesis Equation: 6H₂O + 6CO₂ → C₆H₁₂O₆ + 6O₂Explanation:
Most of the equation comes from the Photosynthesis Equation. Plants take in water and carbon dioxide and sunlight (energy) to produce glucose and oxygen. When we balance the equation and predict reaction. we should get 6O₂ as our answer.
Is it possible for two different compounds to be made from the exact same two elements? Why or why not? With a limited number of elements (less than 120 are known), does this mean we also have a small number of compounds or do we have a large number of compounds in this world?
PLEASE HELP ASAP
Thank you!!
Answer:
Yes. The two elements can combine to form different compounds.
Explanation:
Two elements can combine at different ratios.
Consider CO and CO₂. Both are made from carbon and oxygen. However, C and O combine at a 1:1 ratio in CO but at a 1:2 ratio in CO₂. CO is a fuel; it burns in the air. CO₂ does not burn in the air; it is used to put out fires and is found in extinguishers. CO and CO₂ are two distinct compounds.
There are many ways for the elements to combine with each other. As a result, the first twenty elements on the periodic table alone can produce a large number of compounds.
9.25x10^-8 x6.40x10^3 in scientific equation
Answer:
5.92E-4 or 5.92x10^-4
Explanation:
Which of the diagrams below shows an atom that is not a form of hydrogen?
Answer:
I believe is the npp i kinda forgot how to do these lol
Diagram with npp type shows an atom that is not a form of hydrogen.
What is an atom?
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/30898688
#SPJ2
How many kilograms is 0.22 lb?
O A. 0.22 kg
O B. 0.454 kg
C. 0.0998 kg
O D. 0.49 kg
Answer:
C)0.0998kg
explanation:
1 POUND=0.453592...kg
convert 80kg into grams
Answer:
80000 grams
Explanation:
kilo means 1000
80 x 1000 = 80, 000
51 liters of helium and 29 liters of oxygen (O2), both at 35°C and 1.0
atmosphere, are pumped into a tank that has a volume of 5 liters. Calculate the number
of moles of each component and the total pressure in the tank at 35°C
Answer:
If I have an unknown quantity of gas at a pressure of 1.2 atm, a volume of 31 liters, ... If I contain 3.0 moles of gas in a container with a volume of 60. liters and at a ... Mixtures of helium and oxygen are used in scuba diving tanks to help prevent ... volume of 5.00 Lat 25.0C. Calculate the partial pressure of each gas and the ...
Explanation:
PLEASE HELP I WILL GIVE BRAINLIEST
2. For the graph to the left, what is the independent variable? ___
3. For the graph to the left, what is the dependent variable? ___
Answer:
Independent is x, which is the time.
Dependent is y, which is the distance.
Need help. Is this correct
Answer:
Yes, that is correct!
Explanation:
Answer:
Yes
Explanation:
A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms. These electrons are simultaneously attracted by the two atomic nuclei. A covalent bond forms when the difference between the electronegativities of two atoms is too small for an electron transfer to occur to form ions.
whats the diffrence beetween fluids and nonfluids
Answer:
One is a fluid and one is not.
Explanation:
Fluid is a common state of certain substances, or a type of matter. Liquid is one of the three phases or state of matter. Fluids flow and has some viscosity (thickness). Liquids also flows and it has volume, but no definite shape. A non fluid is a substance that is not a liquid.
Answer:
one is limited and one isn't
I NEED HELP RN 40 POINTS
Answer:
B.) Adding a source of carbon dioxide to the water.
Explanation:
I had that question too.
any help would be much appreciated, i'm being timed :( i'll mark brainliest and 5 star
Answer:
3 times ....
group 2
Explanation:
Which of the following best represents and explains the formula for a compound made from fluorine and hydrogen?
A. HF, because both fluorine and hydrogen are capable of forming only one ionic bond.
B. HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
C. H2F, because fluorine is short of two electrons, and hydrogen is short of one electron.
D. H2F, because fluorine is capable of forming one, and hydrogen is capable of forming two covalent bonds.
Thank you
The answer is B
HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
The formula for a compound made from fluorine and hydrogen is HF, because both fluorine and hydrogen are capable of forming only one covalent bond. The correct option is option B.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion. Covalent bond is weaker than ionic bond.
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron.
The formula for a compound made from fluorine and hydrogen is HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
Therefore, the correct option is option B.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ2
1. If you need to name the alkane C7H16, which prefix and
suffix do you use? What sort of meaning do those prefix and
suffix convey?
The name is heptane. The prefix is hept- , because the longest carbon chain contains seven carbons. The suffix is -ane, because this is the suffix used for all alkanes.
Please mark brainliest if you can!!!
Please help
As the temperature increases, the molecular motion of the molecules decreases and it
becomes difficult to overcome the polar attractions.
a. TRUE
b. FALSE
HELP ASAP EILL MAKE BRAINLEST Students are conducting a la estimating the time takes for the cell cycle in normal chocols They find that the average time for one complete el cycle is 22 hours What arence would they expect to see nerous chien
Cancerous chicken cels will spend more time in the phase
Cancerous cells will not complete all phases of the cell cyce
Cancerus chin cells will complete moss in a shorter amount of time
O Cancerous chicken cols and normales will have the same total amount of time to complete the cell cycle
Answer: I don't know if this helps but here's some information I think might help.
Usually, cells will take between 5 and 6 hours to complete S phase. G2 is shorter, lasting only 3 to 4 hours in most cells. In sum, then, interphase generally takes between 18 and 20 hours. Mitosis, during which the cell makes preparations for and completes cell division only takes about 2 hours. Calculate the percentage of time spent in each phase by counting the total number of cells in each phase (total in interphase, in prophase, etc.) and dividing each by the total number of cells you counted. How do cancer cells differ in total time required for mitosis? Cancer cells produce 117 minutes faster than regular cells. ... Normal cells require 640 minutes during interphase, cancer cells only need 380. For prophase, cancerous cells need 15 minutes less than regular cells. Another hallmark of cancer cells is their "replicative immortality," a fancy term for the fact that they can divide many more times than a normal cell of the body. In general, human cells can go through only about 40-60 rounds of division before they lose the capacity to divide, "grow old," and eventually die 3.
Which of these common substances is a mixture?
A Sulfur
B Pure Water
C Spagettios
D Nitrogen
Answer:
D
Explanation:
A is a compound
B is purified water
C is a substance made by two substances
Hope this helps
what volume of water has a mass of 1 kg
Answer:
[tex]V=0.001\ m^3[/tex]
Explanation:
Mass, m = 1 kg
The density of water, d = 1000 kg/m³
We need to find the volume of water. The formula for the density of an object is equal to mass divided by volume. Its formula is :
d = m/V
V is the volume of water
[tex]V=\dfrac{m}{d}\\\\V=\dfrac{1\ kg}{1000\ kg/m^3}\\\\=0.001\ m^3[/tex]
So, the volume of water is [tex]0.001\ m^3[/tex].
Answer:
Volume of water has a mass of 1 kg is explained below in details.
Explanation:
One liter of h2O has a volume of approximately specifically one kilogram when estimated at its maximum frequency, which happens at about 4 °C. It observes, therefore, that thousand of a liter, recognized as one milliliter (1 mL), of h2O has a volume of about 1 g; 1000 liters of h2O has a volume of about 1000 kg (1 tonne).
How would I fill out this chart?
Answer:
[Top row] - Chemical bonds
[2nd Row L-R] - Force, Ionic, Covalent
[3rd Row L-R] - Atoms, Lost or Gained, Shared
[4th Row L-R] - More stable, Metal and Nonmetal, Nonmetal and Nonmetal
Explanation:
Chemical bonds are a force that hold together atoms in a substance to make compounds more stable.
Chemical bonds include two kinds: Ionic and Covalent.
Ionic in which electrons are lost or gained where attraction is between a Metal and Nonmetal.
Covalent in which electrons are shared where attraction is between a nonmetal and nonmetal.
I have been able to fill the concept map using the correct terms or phrases. The concept map talks about chemical bonds. There are two types of chemical bonds; which ionic bond and covalent bond.
What effects do winds patterns have on climate
Prevailing winds bring air from one type of climate to another. For example, warm winds that travel over water tend to collect moisture as they travel; the water vapor in the air will condense as it moves into colder climates, which is why temperate coastal areas often receive heavy rainfall.
Hope it Helps! T^T
She remembered that chemical equations can summarize what happens in a chemical reaction. What is the name of the two parts found on the left side of the equation below? 4 Fe + 3O2 → 2Fe2O3 A. products B. reactants C. scientific notation D. synthesis
Answer:
The name of the two parts found on the left side of the equation is reactants.
Explanation:
Chemical reaction is the way one substance reacts against another. That is, a chemical reaction is that chemical process in which two or more substances, by the action of an energy factor, are converted into other substances. The new substance (s) that are formed usually present a totally different appearance from that of the starting substances.
In a chemical reaction there are the substances that react, that is, the reactants, and the substances produced, called products.
A chemical reaction is represented by a chemical equation. The formulas of the reactants are written on the left, and those of the products on the right, both separated by an arrow indicating the direction of the reaction.
Reactants ⇒ Products
Then, the name of the two parts found on the left side of the equation is reactants.
The main product of the photosynthesis reaction is
OA.
protein.
OB.
sugar.
Oc.
fat.
OD.
DNA.
Answer: Sugar
Explanation: Because after photosynthesis (Carbon dioxide, water, and sunlight) react, they make two products. Glucose (A sugar) and Oxygen.
Mass Number
19
Atomic Number
Elements
Fluorine
Neon
Aluminium
Phosphorus
10
13
15
a. i. Which of the elements would not be capable of forming compounds
Answer:
Explanation:
The atomic number is the number of protons inside the nucleus of an atom. ... 1.1% carbon 13 with 7 neutrons and a mass of 13.00335 u (measured), and a ... The value given is the mass number of the most stable isotope of that element. ... That's because the chemistry of helium is more like neon (Ne), argon (Ar), etc.
CaO + H2O -> Ca(OH)2
3.50g of Ca(OH)2 was made from 4.20g of CaO? What is the % yield of Ca(OH)2?
The % yield of Ca(OH)₂ : 62.98%
Further eplanationPercent yield is the compare of the amount of product obtained from a reaction with the amount you calculated
General formula:
Percent yield = (Actual yield / theoretical yield )x 100%
An actual yield is the amount of product actually produced by the reaction. A theoretical yield is the amount of product that you calculate from the reaction equation according to the product and reactant coefficients
Reaction
CaO + H₂O ⇒ Ca(OH)₂
mass CaO= 4.2 g
mol CaO(MW=56,0774 g/mol) :
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{4.2}{56,0774 g/mol}\\\\mol=0.075[/tex]
mol Ca(OH)₂ based on mol CaO
mol ratio CaO : Ca(OH)₂,= 1 : 1, so mol Ca(OH)₂ = 0.075
mass Ca(OH)₂(MW=74,093 g/mol) ⇒ theoretical
[tex]\tt mass=mol\times MW\\\\mass=0.075\times 74,093 g/mol\\\\mass=5.557~g[/tex]
% yield :
[tex]\tt =\dfrac{actual}{theoretical}\times 100\%\\\\=\dfrac{3.5}{5.557}\times 100\%\\\\=62.98\%[/tex]
The solids and liquids with the strongest intermolecular forces of attraction will have the
lowest melting and boiling points.
a. TRUE
b. FALSE
How many molecules are in 4.5 moles of Ca(OH),?
We will use dimensional analysis to solve this.
We will need to know Avogadro's number, which is 6.02 × 10²³.
4.5 mol × [tex]\frac{6.02 * 10^{23} molecules}{1 mol}[/tex] = 2.71 × 10²⁴ molecules.
There are 2.71 × 10²⁴ molecules in 4.5 moles of Ca(OH).
A student adds 3.00 g of dry ice (solid CO2) to an empty balloon. What will be the volume of the balloon at STP after all the dry ice sublimes (converts to gaseous CO2)?
can yall help me wit this?
Answer:
the color change
