what are three ways to add receipts to quick books on line receipt capture?

Answer:

This is a management system in wireless communication that oversees radio resources and crosstalks between two radio transmitters which make use of the same channel.

Explanation:

Radio Resource Management is a management system in wireless communication that oversees radio resources and crosstalks between two radio transmitters which make use of the same channel. Its aim is to effectively manage the radio network infrastructure. Its advantages include;

1. It allows for multi-users communication instead of point-to-point channel capacity.

2. it increases the system spectral efficiency by a high order of magnitude. The introduction of advanced coding and source coding makes this possible.

3. It helps systems that are affected by co-channel interference. An example of such a system is the wireless network used in computers which are characterized by different access points that make use of the same channel frequencies.

Answer:

def case_convertfile( file_name):

    with open(" new_file","x") as file:

         file.close( )

    with open("file_name", "r") as txt_file:

     while True:

            word = txt_file.readline( )

            word_split= word.split(" ")

            for word in word_split:

                  upper_case = word.uppercase( )

                  file= open("new_file","w+")

                  file= open("new_file","a+")

                  file.write(upper_case)

     txt_file.close( )

     file.close( )

Explanation:

This python function would open an existing file with read privilege and a new file with write and append privileges read and capitalize the content of the old file and store it in the new file.

Answer:

Answered below

Explanation:

A macro or macroinstruction is a programmable pattern which translates a sequence of inputs into output. It is a rule that specifies how a certain input sequence is mapped to a replacement output sequence. Macros makes tasks less repetitive by representing complicated keystrokes, mouse clicks and commands.

By thoroughly testing a macro before deployment, you are able to observe the flow of the macro and also see the result of each action that occurs. This helps to isolate any action that causes an error or produces unwanted results and enable it to be consistent across end user platforms.

Answer:

sfadasda

Explanation:

dsadasdadas

Answer:

total_owls = 0

num_owls_A = int(input())

num_owls_B = int(input())

total_owls = num_owls_A + num_owls_B

print("Number of owls:", total_owls)

Explanation:

Initialize the  total_owls as 0

Ask the user to enter num_owls_A and num_owls_B, convert the input to int

Sum the num_owls_A and num_owls_B and set it to the total_owls

Print the total_owls

avg_owls=0.0

num_owls_zooA = int(input())

num_owls_zooB = int(input())

num_owls_zooC = int(input())

num_zoos = 3

avg_owls = (num_owls_zooA + num_owls_zooB + num_owls_zooC) / num_zoos

print('Average owls per zoo:', int(avg_owls))

There is a problem while you are trying the calculate the average owls per zoo.

As you may know, in order to calculate the average, you need to get the total number of owls in all the zoos, then divide it to the number of zoos. That is why you need to sum num_owls_zooA + num_owls_zooB + num_owls_zooC and divide the result by num_zoos

Be aware that the average is printed as integer value. That is why you need to cast the avg_owls to an int as int(avg_owls)

Learn more about integer value on:

https://brainly.com/question/31945383

#SPJ6

Answer:

Sequence of popped values: h,s,f.

State of stack (from top to bottom): m, d

Explanation:

Assuming that stack is  initially empty. Suppose that p contains the popped values. The state of the stack is where the top and bottom are pointing to in the stack. The top of the stack is that end of the stack where the new value is entered and existing values is removed. The sequence works as following:

push(d) -> enters d to the Stack

Stack:  

d ->top

push(h) -> enters h to the Stack

Stack:

h ->top

d ->bottom

pop() -> removes h from the Stack:

Stack:

d ->top

p: Suppose p contains popped values so first popped value entered to p is h

p = h

push(f) -> enters f to the Stack

Stack:

f ->top

d ->bottom

push(s) -> enters s to the Stack

Stack:

s ->top

f

d ->bottom

pop() -> removes s from the Stack:

Stack:

f ->top

d -> bottom

p = h, s

pop() -> removes f from the Stack:

Stack:

d ->top

p = h, s, f

push(m) -> enters m to the Stack:

Stack:

m ->top

d ->bottom

So looking at p the sequence of popped values is:

h, s, f

the final state of the stack:

m, d

end that is the top of the stack:

m

The quick key to highlighting a column is the Ctrl + Shift + down arrow. Thus, option (b) is correct.

The term column refers to how data is organized vertically from top to bottom. Columns are groups of cells that are arranged vertically and run from top to bottom. A column is a group of cells in a table that are vertically aligned. The column is the used in the excel worksheet.

The quick key for highlighting a column is Ctrl + Shift + down arrow. To select downward, press Ctrl-Shift-Down Arrow. To pick anything, use Ctrl-Shift-Right Arrow, then Ctrl-Shift-Down Arrow. In the Move/Highlight Cells, the was employed. The majority of the time, the excel worksheet was used.

As a result, the quick key to highlighting a column is the Ctrl + Shift + down arrow. Therefore, option (b) is correct.

Learn more about the column, here:

https://brainly.com/question/3642260

#SPJ6

Answer:

its (B) ctrl+shift+down arrow

hope this helps <3

Explanation:

Answer:

Which sentence best matches the context of the word reticent as it is used in the following example?

We could talk about anything for hours. However, the moment I brought up dating, he was extremely reticent about his personal life.

Explanation:

Which sentence best matches the context of the word reticent as it is used in the following example?

We could talk about anything for hours. However, the moment I brought up dating, he was extremely reticent about his personal life.

Answer:

mouse printer CPU touch screen

Explanation:

on a tablet computer hope this helps you :)

Answer:

a. True

Explanation:

Cloud computing can be defined as a type of computing that requires shared computing resources such as cloud storage (data storage), servers, computer power, and software over the internet rather than local servers and hard drives.

Generally, cloud computing offers individuals and businesses a fast, effective and efficient way of providing services.

In Computer science, one of the most essential characteristics or advantages of cloud computing is rapid elasticity.

By rapid elasticity, it simply means that cloud computing gives you the ability to expand and reduce resources according to your specific service requirement because resources such as servers can be used to execute a particular task and after completion, these resources can then be released or reduced.

Some of the examples of cloud computing are Google Slides, Google Drive, Dropbox, OneDrive etc.

Answer:

Pick up roller

Explanation:

you should first check the pickup roller component. This component is the part of the printer that picks paper up from the paper tray. The pickup roller links the printer and the paper. When the printer printer is running, the roller would take paper from the paper tray for the printer to print on. One of the issues it can have is Paper jam where the roller would stop turning so that it will no longer be picking papers up from the tray.

Answer:

In dynamic scoping the current block is searched by the compiler and then all calling functions consecutively e.g. if a function a() calls a separately defined function b() then b() does have access to the local variables of a(). The visible variables with the name of the function in which it was defined are given below.

Explanation:

In main() function three integer type variables are declared: a,b,c

In fun1() three int type variables are declared/defined: b,c,d

In fun2() three int type variables are declared/defined: c,d,e

In fun3() three int type variables are declared/defined: d,e,f

a. Main calls fun1; fun1 calls fun2; fun2 calls fun3

Here the main() calls fun1() which calls fun2() and fun2() calls func3() . This means first the func3() executes, then fun2(), then fun1() and last main()

Visible Variable:  d, e, f        Defined in: fun3

Visible Variable: c                 Defined in: fun2 (the variables d and e of fun2  

                                                                                                     are not visible)

Visible Variable: b                  Defined in: fun1 ( c and d of func1 are hidden)

Visible Variable: a                 Defined in: main (b,c are hidden)

b. Main calls fun1; fun1 calls fun3

Here the main() calls fun1, fun1 calls fun3. This means the body of fun3 executes first, then of fun1 and then in last, of main()

Visible Variable: d, e, f           Defined in: fun3

Visible Variable:  b, c              Defined in: fun1 (d not visible)

Visible Variable:  a                  Defined in: main ( b and c not visible)

c. Main calls fun2; fun2 calls fun3; fun3 calls fun1

Here the main() calls fun2, fun2 calls fun3 and fun3 calls fun1. This means the body of fun1 executes first, then of fun3, then fun2 and in last, of main()

Visible Variable:  b, c, d        Defined in: fun1

Visible Variable:  e, f             Defined in: fun3 ( d not visible)

Visible Variable:  a                Defined in: main ( b and c not visible)

Here variables c, d and e of fun2 are not visible

d. Main calls fun3; fun3 calls fun1

Here the main() calls fun3, fun3 calls fun1. This means the body of fun1 executes first, then of fun3 and then in last, of main()

Visible Variable: b, c, d     Defined in: fun1  

Visible Variable:   e, f        Defined in:  fun3   ( d not visible )

Visible Variable:    a          Defined in: main (b and c not visible)

e. Main calls fun1; fun1 calls fun3; fun3 calls fun2

Here the main() calls fun1, fun1 calls fun3 and fun3 calls fun2. This means the body of fun2 executes first, then of fun3, then of fun1 and then in last, of main()

Visible Variable: c, d, e        Defined in: fun2

Visible Variable:  f               Defined in: fun3 ( d and e not visible)

Visible Variable:  b               Defined in:  fun1 ( c and d not visible)

Visible Variable: a                Defined in: main ( b and c not visible)

f. Main calls fun3; fun3 calls fun2; fun2 calls fun1

Here the main() calls fun3, fun3 calls fun2 and fun2 calls fun1. This means the body of fun1 executes first, then of fun2, then of fun3 and then in last, of main()

Visible Variable: b, c, d       Defined in: fun1  

Visible Variable: e               Defined in: fun2  

Visible Variable: f                Defined in: fun3  

Visible Variable: a               Defined in: main

Answer:

INSERT INTO categories (CategoryName)

VALUES ('Brass Code');

Explanation:

The SQL refers to the Structured Query Language in which the data is to be designed and maintained that occurred in the relational database management system i.e it is to be used for maintaining and query the database

Now the INSERT statement should be written as follows

INSERT INTO categories (CategoryName)

VALUES ('Brass Code');

Answer:

c. Cartography.

Explanation:

Cartography is the science and art of making an illustrated map or chart. Geographic information system (GIS) allows users to interpret, analyze, and visualize data in different ways that reveal patterns and trends in the form of reports, charts, and maps.

Basically, cartography is the science and art of depicting a geographical area graphically, mostly on flat surfaces or media like maps or charts. It is an ancient art that was peculiar to the fishing and hunting geographical regions. Geographic information system is an improved and technological form of cartography used for performing a whole lot of activities or functions on data generated from different locations of the Earth.

Answer:

C. Cartography

Explanation:

Answer:

I am writing a Python program:

pi=3.14 #the value of pi is set to 3.14

radius = float(input("Enter the radius of sphere: ")) #prompts user to enter the radius of sphere

surface_area = 4 * pi * radius **2 #computes surface area of sphere

volume = (4.0/3.0) * (pi * radius ** 3) #computes volume of sphere

print("Surface Area of sphere is: ", surface_area) #prints the surface area

print("Volume of sphere is: {:.2f}".format(volume)) #prints the volume        

Explanation:

Please see the attachment for the complete interactive code.

The first three lines of print statement in the attached image give a brief description of the program.

Next the program assigns 3.14 as the value of π (pi). Then the program prompts the user to enter the radius. Then it computes the surface area and volume of sphere using the formulas. Then it prints the resultant values of surface area and volume on output screen.

The psuedocode for this program is given below:

PROGRAM SphereVolume

pi=3.14

NUMBER radius, surface_area, volume  

INPUT radius

COMPUTE volume = (4/3) * pi* radius ^3

COMPUTE surface_area = 4 * pi * radius ^ 2

OUTPUT volume , surface_area

END

Answer:

Computer ethics is a part of practical philosophy concerned with how computing professionals should make decisions regarding professional and social conduct. Margaret Anne Pierce, a professor in the Department of Mathematics and Computers at Georgia Southern University has categorized the ethical decisions related to computer technology and usage into three primary influences:

The individual's own personal code.

Any informal code of ethical conduct that exists in the work place.

Exposure to formal codes of ethics.

Explanation:

Answer:

Here is the JAVA program:

import java.io.*;

import java.util.*;

public class Main {

public static void main(String[] args) throws FileNotFoundException{ //the start of main() function body, it throws an exception that indicates a failed  attempt to open the file

Scanner input = new Scanner(new File("file.txt")); //creates a Scanner object and a File object to open and scan through the file.txt    

coinFlip(input);    } //calls coinFlip method

public static void coinFlip(Scanner input) { //coinFlip method that accepts as its parameter a string input holding a file name

while(input.hasNextLine()) { //iterates through the input file checking if there is another line in the input file

Scanner scan = new Scanner(input.nextLine()); //creates a Scanner object

int head = 0; // stores count of number of heads

int count = 0; //stores count of  total number of tokens

while(scan.hasNext()) { //iterates through the sequence checking if there is another sequence in the input file

String token= scan.next(); // checks and returns the next token

if (token.equalsIgnoreCase("H")||token.equalsIgnoreCase("Heads")) { //compares H or Heads with the tokens in file ignoring lower case and upper case differences

           head++;                } //if a token i.e. any form of heads in file matches with the H or Heads then add 1 to the number of heads

           count++;            } //increment to 1 to compute total number of counts

double result = Percentage(head, count); //calls Percentage method passing number of heads and total counts to compute the percentage of heads

System.out.println(head + " heads " + "(" + result +"%)"); // prints the number of heads

if(result >= 50.00) { //if the percentage is greater or equal to 50

System.out.println("You win!");} //displays this message if above if condition is true

else //if the percentage is less than 50

{System.out.println("You lose!");}  }    } //displays this message if above if condition is false

public static double Percentage(int h, int total) { //method to compute the percentage of heads

double p = (double)h/total* 100; // divide number of heads with the total count and multiply the result by 100 to compute percentage

return p;    } } //returns result

Explanation:

The program is well explained in the comments mentioned with each line of the above code. I will explain how the method coinFlip  works.

Method coinFlip accepts a string holding a file name as its parameter. It opens that file and reads its contents as a sequence of tokens. Then it reads and scans through each token and the if condition statement:

if (token.equalsIgnoreCase("H")||token.equalsIgnoreCase("Heads"))

checks if the each token in the sequence stored in the file is equal to the H or Heads regardless of the case of the token. For example if the first token in the sequence is H then this if condition evaluates to true. Then the head++ statement increments the count of head by 1. After scanning each token in the sequence the variable count is also increased to 1.

If the token of the sequence is HeAds then this if condition evaluates to true because the lower or upper case difference is ignored due to equalsIgnoreCase method. Each time a head is found in the sequence the variable head is incremented to 1.

However if the token in the sequence is Tails then this if condition evaluates to false. Then the value of head variable is not incremented to 1. Next the count variable is incremented to 1 because this variable value is always incremented to 1 each time a token is scanned because count returns the total number of tokens and head returns total number of heads in the tokens.

Percentage method is used to return the percentage of the number of heads in the sequence. It takes head and count as parameters (h and total). Computes the percentage by this formula h/total* 100. If the result of this is greater than or equal to 50 then the message  You win is displayed otherwise message You lose! is displayed in output.

Answer:

yesnono

Explanation:

mystr = 'yes'

yourstr = 'no'

mystr += yourstr * 2

Explanation:

the answer is false ........

The fact that the speed of a vehicle is lower than the prescribed limits shall relieve the driver from the duty to decrease speed when approaching and crossing an intersection is not true.

An intersection serves as the point where many lanes cross on the road which is a point where driver is required to follow the traffic rules.

However, the above statement is not true because , a driver can decide not  decrease speed when approaching and crossing an intersection, even though it is a punishable offense in traffic rules.

Read more on traffic rules here: https://brainly.com/question/1071840

#SPJ2