Answer:
intensity
Explanation:
b. example, The sun is very bright and intense. and sounds can be very loud.
Your car rolls slowly in a parking lot and bangs into the metal base of a light pole. In terms of safety, is it better for your collision with the light pole to be elastic, inelastic, or is the safety risk the same for either case? Explain.
Answer:
AN ELASTIC COLLISION IS SAFER
Explanation:
IT'S BECAUSE THE MOVEMENT IS PRESERVED. YEN AN ELASTIC
COLLISION, THE ELASTIC BODY ABSORBS SOME OF THE MOVEMENT.
THIS CAUSES THE CAR TO SLOW DOWN MORE SLOWLY THAN IN AN
INELASTIC COLLISION WHERE IT DECELERATES FASTER.
ANYWAY I LEAVE YOU THE LINK
(THEY ALREADY DELETED THE ENGLISH SITE, BUT YOU CAN USE
TRANSLATOR):
https://gscourses.thinkific.com
Use the following information to answer the next question.
Environmental Concerns
1. release of greenhouse gases
2. release of gases that cause acid rain
3. release of excess heat
4. depletion of solar energy
5. depletion of geothermal energy
6. flooding of land
Which of the above environmental concerns are associated with the production of electricity?
Select one:
O A. 2, 3, and 4
O B. 1, 2, 3, and 6
O C. 1, 2, 3, 5 and 6
O D. 1, 3, and 5
Answer:
1.Emitted primarily through the burning of fossil fuels (oil, natural gas, and coal), solid waste, and trees and wood products. Changes in land use also play a role. Deforestation and soil degradation add carbon dioxide to the atmosphere, while forest regrowth takes it out of the atmosphere.
2.Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
3.Untreated, heat exhaustion can lead to heatstroke, a life-threatening condition that occurs when your core body temperature reaches 104 F (40 C) or higher. Heatstroke requires immediate medical attention to prevent permanent damage to your brain and other vital organs that can result in death.
4.The loss of solar energy in passing through the atmospheric layers is called the atmospheric deflection. ... The longer the path traversed, the greater the amount of radiant energy depleted. Various processes whereby heat energy is lost through the atmosphere are known as scattering, diffusion, absorption, and reflection.
5.Geothermal energy is renewable because the Earth has retained a huge amount of the heat energy that was generated during formation of the planet. In addition, heat is continuously produced by decay of radioactive elements within the Earth. The amount of heat within the Earth, and the amount that is lost though natural processes (e.g. volcanic activity, conduction/radiation to the atmosphere), are much, much more than the amount of heat lost through geothermal energy production. At any one geothermal field, however, the temperature of the geothermal reservoir or the fluid levels/fluid pressure in the reservoir may decrease over time as fluids are produced and energy is extracted. Produced fluids can be re-injected to maintain pressures, although this may further cool down the reservoir if care is not taken. Over time, it is commonly necessary to drill additional wells in order to maintain energy production as temperatures and/or reservoir fluid pressures decline.
6.Floods, Floodplains, and Flood-Prone Areas. ... Flooding is a result of heavy or continuous rainfall exceeding the absorptive capacity of soil and the flow capacity of rivers, streams, and coastal areas. This causes a watercourse to overflow its banks onto adjacent lands.
The environmental concerns associated with the production of electricity are the release of greenhouse gases, the release of gases that cause acid rain, the release of excess heat, the flooding of land, and the depletion of geothermal energy so, option C is correct.
What is electricity?The presence or movement of charged particles is electricity. The movement of electrons through a circuit is known as an electric current. The accumulation of electrons on an insulator causes static electricity.
Mostly released when solid trash, trees, and wood products are burned, along with fossil fuels (coal, gas, and oil).
Land use changes also have an impact. Carbon dioxide is released into the atmosphere by deforestation and soil erosion, while it is removed from it by forest regeneration.
To know more about electricity:
https://brainly.com/question/29812640
#SPJ2
A motorcycle daredevil jumps off a 33.0 ramp at 20.3 m/s. The landing ramp is at the same height, 28.0 m away. What is the height of the motorcycle when it reaches the landing ramp? (Unit = m)
The height of the motorcycle daredevil when it reaches the landing ramp is 4.93 m.
Since the ramp is a 33.0° ramp and the motorcycle daredevil jumps off with a speed of 20.3 m/s, the motorcycle dare devil has a horizontal component of speed u = 20.3cos33.0° m/s and a vertical component of speed v = 20.3sin33.0° m/s.
Now, since the other ramp is d = 28.0 m away, it takes the time it takes the motorcycle dare devil to reach it is t.
Considering motion in the horizontal direction, d = ut.
Thus, t = d/u
= 28.0 m/20.3cos33.0° m/s
= 28.0 m/(20.3 × 0.8387) m/s
= 28.0 m/17.025 m/s
= 1.645 s
Let h be the height of the motorcycle daredevil when it reaches the landing ramp in time, t.
Considering the vertical motion and using h = vt - 1/2gt² where v = vertical velocity of motorcycle daredevil = 20.3sin33.0°, t = time taken to reach landing ramp = 1.645 s and g = acceleration due to gravity = 9.8 m/s² (Note that there is a negative in front of g since it is directed downwards)
So, substituting the values of the variables into the equation, we have
h = vt - 1/2gt²
h = 20.3sin33.0° m/s × 1.645 s - 1/2 × 9.8 m/s² × (1.645 s)²
h = 20.3 × 0.5446 m/s × 1.645 s - 1/2 × 9.8 m/s² × 2.706025 s²
h = 18.187 m - 1/2 × 26.519 m
h = 18.187 m - 13.26 m
h = 4.927
h ≅ 4.93 m
So, the height of the motorcycle daredevil when it reaches the landing ramp is 4.93 m.
Learn more about ramps here:
https://brainly.com/question/20113308
Select the correct answer.
Which statement is true according to Newton's second law of motion?
A.
An object accelerates in the direction opposite to the direction of the force applied.
B.
An object accelerates in the direction perpendicular to the direction of the force applied.
C.
An object accelerates in the same direction as that of the force applied.
D.
An object undergoes no acceleration on the application of force.
E.
An object’s acceleration is independent to the force applied.
Answer:
c
Explanation:
i think the answer is c because the acceleration is directly proportional to the force but inversely proportional to the mass of the body according to the equation
a=f/m
hope this helps
Answer:
See image
Explanation:
Plato
Select the only true statement:
A beam in bending experiences tensile stresses on one side and compressive stresses on the other side.
A beam in bending experiences tensile stresses along the beam center and compressive stresses along the beam’s edges.
A beam in bending experiences only compressive stresses.
A beam in bending experiences only tensile stresses.
Answer:
A beam in bending experiences tensile stresses on one side and compressive stresses on the other side.
Explanation:
A beam of light bending experiences bending stress. There exists tension inside and outside the curve. The transverse plains in the materials remains parallel to the radius during bending.B.F.Skinner emphesized the importance of-----?
Answer:
BFSkinner enfatizó la importancia de creía en la importancia de desarrollar la psicología experimental y dejar atrás el psicoanálisis y las teorías acerca de la mente basadas en el simple sentido común.
Explanation:
The patellar tendon attaches to the tibia at a 20 deg angle 3 cm from the axis of rotation at the knee. If the force generated in the patellar tendon is 400 N, what is the resulting angular acceleration, in rad/s2), if the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm
Answer:
the resulting angular acceleration is 15.65 rad/s²
Explanation:
Given the data in the question;
force generated in the patellar tendon F = 400 N
patellar tendon attaches to the tibia at a 20° angle 3 cm( 0.03 m ) from the axis of rotation at the knee.
so Torque produced by the knee will be;
T = F × d⊥
T = 400 N × 0.03 m × sin( 20° )
T = 400 N × 0.03 m × 0.342
T = 4.104 N.m
Now, we determine the moment of inertia of the knee
I = mk²
given that; the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm ( 0.25 m )
we substitute
I = 4.2 kg × ( 0.25 m )²
I = 4.2 kg × 0.0626 m²
I = 0.2625 kg.m²
So from the relation of Moment of inertia, Torque and angular acceleration;
T = I∝
we make angular acceleration ∝, subject of the formula
∝ = T / I
we substitute
∝ = 4.104 / 0.2625
∝ = 15.65 rad/s²
Therefore, the resulting angular acceleration is 15.65 rad/s²
Forced response is just the current or voltage that occures due to an input voltage or current.
a. True
b. False
Answer:
Option B
Explanation:
Generally
The forced response of a system is what the circuit does with the sources turned on, but with the initial conditions set to zero.
Therefore
Option B
A coil of wire is connected to a galvanometer. When the coil is rotated in a magnetic field, the galvanometer records a current because the free electrons in the moving wire experience a force from the magnetic field that pushes them through the wire.
a. True
b. False
Answer:
True
Explanation:
This is true because the current occurs in the galvanometer not because the t coil that acts as a transformer or because it's ferromagnetic but because of the galvanometer records a current because the free electrons in the moving wire experience a force from the magnetic field that pushes them through the wire.
Given the triangle shown below, what is the cosine of the angle 0 ?
triangle trig image 1
O Vx/V
O Vx/Vy
O Vy/Vx
O Vy/
Answer:
?
Explanation:
i am sorry but there is no triangle
Explanation: edmentum sample answer
A horizontail rod (oriented in the east -west direction) is moved northward at a constant velocity through a magnetic field that points straight down. Make a statement concerning the potential induced across the rod.
A) The east end of the rod is at higher potential than the west end.
B) The bottom surface of the rod is at higher potential than the top surface.
C) The top surface of the rod is at higher potential than the bottom surface.
D) The west end of the rod is at higher potential than the east end.
E) The potential is uniform.
Answer:
a
Explanation:
Question 1 of 10
Which nucleus completes the following equation?
239UHe+?
A. 228 Th
B. 2220
c. 23. Pu
D. 78Th
SUBMIT
Answer:
Option D. ²²²₉₀Th
Explanation:
Let the unknown be ⁿₘZ. Thus, the equation becomes:
²²⁶₉₂U —> ⁴₂He + ⁿₘZ
Next, we shall determine n, m and Z. This can be obtained as follow:
For n:
226 = 4 + n
Collect like terms
226 – 4 = n
222 = n
n = 222
For m:
92 = 2 + m
Collect like terms
92 – 2 = m
90 = m
m = 90
For Z:
ⁿₘZ => ²²²₉₀Z => ²²²₉₀Th
Therefore, the complete equation becomes:
²²⁶₉₂U —> ⁴₂He + ⁿₘZ
²²⁶₉₂U —> ⁴₂He + ²²²₉₀Th
Thus, the unknown is ²²²₉₀Th
The SAME amount of current I passes through three different resistors. R2 has twice the cross-sectional area and the same length as R1, and R3 is three times as long as R1 but has the same cross-sectional area as R1. 1)In which case is the CURRENT DENSITY through the resistor the smallest
Answer:
resistor R₂ has the lowest current density
Explanation:
The current density is
j = I / A
now let's analyze each case
a) R₂ has an area 2A₀ and a length L₀ that R₁
b) R₃ has an area Ao and a length 3L₀ what R₁
we can see that all the area is given in relation to the resistance R₁
the current density in R₁ is
j₁ = I / A₀
the current density in R₂
j₂ = I / 2A₀
j₂ 2 = ½ I/A₀
the current density in R₃
j₃ = I / A₀
j₂ < j₁ = j₃
therefore resistor R₂ has the lowest current density
You are a detective investigating why someone was hit on the head by a falling flowerpot. One piece of evidence is a smartphone video taken in a 4th-floor apartment, which happened to capture the flowerpot as it fell past a window. In a span of 8 frames (captured at 30 frames per second), the flowerpot falls 0.84 of the height of the window. You visit the apartment and measure the window to be 1.27 m tall. What can you conclude? Under what assumptions? Give as much detail as you can.
Answer:
Ok, first, suppose that a given object is dropped or thrown down.
Then the acceleration of the object is the gravitational acceleration, given by:
a(t) = -9.8m/s^2
The velocity of the object can be integrated from that, it gives:
v(t) = (-9.8m/s^2)*t + V0
where V0 is the initial speed of the object, in the case that it is dropped, V0 is equal to 0m/s
The position equation can be found integrating again:
p(t) = (1/2)*(-9.8m/s^2)*t^2 + V0*t + p0
Where p0 is the initial position.
Now let's see our problem.
We know that in 8 frames, the flowerpot falls 0.84 of the height of the window, which is 1.27m
Then the distance that it falls is:
D = 0.84*1.27m = 1.07m
Now we also know that the camera captures at 30 fps
Then we have the relation:
30 frames = 1 second
1 = (1 second)/(30 frames)
With this, we can rewrite:
8 frames = 8 frames* (1 second)/(30 frames) = 0.267 seconds.
So now we know the distance that the pot fall, and the time in which it did fall.
Remember that the position equation for a falling object, is:
p(t) = (1/2)*(-9.8m/s^2)*t^2 + V0*t + p0
let's define p0 = 0m
Then the position equation of the pot is given by:
p(t) = (1/2)*(-9.8m/s^2)*t^2 + V0*t
The distance that the pot would travel between t = 0s and t = t' is:
distance = p(t') - p(0s)
So, knowing that between t= 0s and t = 0.267s, the pot did travel -1.07m (the negative sign is because it traveled downwards), we can find the initial speed of the pot.
-1.07m = p(0.267s) - p(0s)
-1.07m = (1/2)*(-9.8m/s^2)*(0.267s)^2 + V0*0.267s
[-1.07m + (1/2)*(9.8m/s^2)*(0.267s)^2]/0.267s = V0 = -2.7 m/s
This means that the pot was thrown downwards with an initial speed of 2.7 m/s
So we can conclude that the pot did not fall down on its own, someone threw it intentionally downwards.
This is the only thing that we can conclude with the given information.
A 120-kg refrigerator, 2.00 m tall and 85.0 cm wide, has its center of mass at its geometrical center. You are attempting to slide it along the floor by pushing horizontally on the side of the refrigerator. The coefficient of static friction between the floor and the refrigerator is 0.300. Depending on where you push, the refrigerator may start to tip over before it starts to slide along the floor. What is the highest distance above the floor that you can push the refrigerator so that it won't tip before it begins to slide
Answer:
Following are the response to the given question:
Explanation:
To address this problem, the notions of friction and torque in the kinematic equations of motion have to be applied.
The friction resistance is defined by
[tex]F=\mu mg[/tex]
Here seem to be our values.
[tex]\mu=0.3\\\\m= 120\ kg \\\\g=9.8\ \frac{m}{s^2} \\\\[/tex]
[tex]F=0.3 \times 120 \times 9.8= 36 \times 9.8= 352.8 \ N[/tex]
Take the brain's mid-size weight halfway to the floor, i.e. [tex]d = \frac{0.85}{2} = 0.425 \ m[/tex]. The torque around the bottom of the cooler should be zero to reach the maximum range.
[tex]F \times x= mg \times d\\\\ \text{Re-set for x}\\\\ x=\frac{mg \times d}{F}= \frac{mg \times d}{ \mu m g} =\frac{d}{\mu}=\frac{0.425}{0.3}=1.42 \m[/tex]
Then we may say that distance before turning is 1.42m.
You are cooking breakfast for yourself and a friend using a 1,140-W waffle iron and a 510-W coffeepot. Usually, you operate these appliances from a 110-V outlet for 0.500 h each day. (a) At 12 cents per kWh, how much do you spend to cook breakfast during a 30.0 day period
Answer:
The cost is 297 cents.
Explanation:
Power of iron, P = 1140 W
Power of coffee pot, P' = 510 W
Voltage, V = 110 V
Time, t = 0.5 h each day
Cost = 12 cents per kWh
(a) Total energy
E = P x t + P' x t
E = 1140 x 0.5 x 60 x 60 + 510 x 0.5 x 60 x 60
E = 2052000 + 918000 = 2970000 J
1 kWh = 3.6 x 10^6 J
E = 0.825 kWh
For 30 days
E' = 0.825 x 30 = 24.75 kWh
So, the cost is
= 12 x 24.75 = 297 cents
b) When the ball is near its maximum height it experiences a brief gust of wind that reduces its horizontal velocity by 2.50 m/s. What distance in meters does the ball travel horizontally
Answer:
The horizontal distance is 0.64 m.
Explanation:
Initial velocity, u =2.5m/s
The maximum horizontal distance is
[tex]R = \frac{u^2}{2g}\\\\R = \frac{2.5\times 2.5}{9.8}\\\\R = 0.64 m[/tex]
Assume that the change in pressure of H2S is small enough to be neglected in the following problem.
H2S(g) ⇌ 2H2(g) + S2(g) Kp =2.2 x 10^-6
a. Calculate the equilibrium pressures of all species in an equilibrium mixture that results from the decomposition of H2S with an initial pressure of 0.824 atm.
b. Show that the change is small enough to be neglected.
Answer:
pH2S = 0.816 atm
pH2 = 0.0153 atm
pS2 = 0.00765 atm
Explanation:
Step 1: Data given
Kp = 2.2 *10 ^-6
Initial pressure H2S = 0.824 atm
Step 2: The equation
H2S(g) ⇌ 2H2(g) + S2(g)
Step 3: The initial pressure
pH2S = 0.824 atm
pH2 = 0 atm
pS2 = 0 atm
Step 4: The pressure at the equilibrium
pH2S = 0.824 - x atm
pH2 = 2x atm
pS2 = x atm
Kp = ((pH2)² * (pS2))/pH2S
2.2 * 10^-6 = ((2x)² * x) / (0.824 - x)
2.2*10^-6 = 4x³ / (0.824 - x)
4x³ = 2.2*10^-6 * (0.824 - x)
x = 0.00765
pH2S = 0.824 - 0.00765 = 0.816 atm
pH2 = 2* 0.00765 = 0.0153 atm
pS2 = 0.00765 atm
The change is small enough to be neglected because 0.00765 << 0.824
If we calculate the result with or without this change the result will not be very different
2.2*10^-6 = 4x³ / (0.824 )
x = 0.00768 atm
pH2S = 0.824 - 0.00768 = 0.816 atm
pH2 = 2* 0.00768 = 0.0154 atm
pS2 = 0.00768 atm
A baseball pitcher brings his arm forward during a pitch, rotating the forearm about the elbow. If the velocity of the ball in the pitcher's hand is 34.0 m/s and the ball is 0.310 m from the elbow joint, what is the angular velocity (in rad/s) of the forearm
Answer:
[tex]\omega=109.67\ rad/s[/tex]
Explanation:
Given that,
The speed of the ball, u = 34 m/s
The ball is 0.310 m from the elbow joint.
We need to find the angular velocity (in rad/s) of the forearm.
We know that,
[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{34}{0.31}\\\\\omega=109.67\ rad/s[/tex]
So, the required angular velocity of the forearm is 109.67 rad/s.
In the graph below, why does the graph stop increasing after 30 seconds?
A. The hydrogen gas is absorbing heat to undergo a phase change.
B. A catalyst needs to be added to increase the amount of hydrogen produced.
C. No more hydrogen can be produced because all of the reactants have become products at this point.
D. It has reached the maximum amount of product it can make at this temperature. The temperature would need to increase to produce more.
Answer:
The answer is "Option C".
Explanation:
It's evident from the figure below that after thirty minutes, not no more hydrogen can be created because all of the reactants have converted into products.
hydrogen gas created in cm cubes per period x = 20 seconds, y = 45 centimeters squared, and so on.
A reaction's terminus (the graph's flat line) indicates that no further products are being created during the reaction.
A 2.5 kg rock is released from rest at the surface of a pond 1.8 m deep. As the rock falls, a constant upward force of 5.0 N is exerted on it by water resistance. Let y=0 be at the bottom of the pond.
Required:
a. Calculate the nonconservative work, Wnc, done by water resistance on the rock, the gravitational potential energy of the system, U, the kinetic energy of the rock, K, and the total mechanical energy of the system, E, when the depth of the rock below the water's surface is 0 m.
b. Calculate the nonconservative work, Wnc, done by water resistance on the rock, the gravitational potential energy of the system, U, the kinetic energy of the rock, K, and the total mechanical energy of the system, E, when the depth of the rock below the water's surface is 0.50 m.
c. Calculate the nonconservative work, Wnc, done by water resistance on the rock, the gravitational potential energy of the system, U, the kinetic energy of the rock, K, and the total mechanical energy of the system, E, when the depth of the rock below the water's surface is 1.0 m.
Answer:
a) Nonconservative Work
[tex]W_{disp} = 9\,J[/tex]
Final Gravitational Potential Energy
[tex]U_{f} = 0\,J[/tex]
Final Translational Energy
[tex]K_{f} = 35.131\,J[/tex]
b) Nonconservative Work
[tex]W_{disp} = 6.5\,J[/tex]
Final Gravitational Potential Energy
[tex]U_{f} = 12.259\,J[/tex]
Final Translational Energy
[tex]K_{f} = 25.373\,J[/tex]
c) Nonconservative Work
[tex]W_{disp} = 4\,J[/tex]
Final Gravitational Potential Energy
[tex]U_{f} = 24.518\,J[/tex]
Final Translational Energy
[tex]K_{f} = 15.614\,J[/tex]
Explanation:
The nonconservative work due to water resistance is defined by definition of work:
[tex]W_{disp} = F\cdot (y_{o}-y_{f})[/tex] (1)
Where:
[tex]W_{disp}[/tex] - Dissipate work, in joules.
[tex]F[/tex] - Resistance force, in newtons.
[tex]y_{o}[/tex] - Initial height, in meters.
[tex]y_{f}[/tex] - Final height, in meters.
The final gravitational potential energy ([tex]U_{f}[/tex]), in joules, is calculated by means of the definition of gravitational potential energy:
[tex]U_{f} = m\cdot g\cdot y_{f}[/tex] (2)
Where:
[tex]m[/tex] - Mass of the rock, in kilograms.
[tex]g[/tex] - Gravitational acceleration, in meters per square second.
The final translational kinetic energy ([tex]K_{f}[/tex]), in joules, is obtained by means of the Principle of Energy Conservation, Work-Energy Theorem and definitions of gravitational potential energy and translational kinetic energy:
[tex]m\cdot g\cdot y_{o} = U_{f} + K_{f} + W_{disp}[/tex] (3)
[tex]K_{f} = m\cdot g\cdot y_{o} - U_{f} - W_{disp}[/tex]
Lastly, the mechanical energy of the system ([tex]E[/tex]), in joules, is the sum of final gravitational potential energy, translational kinetic energy and dissipated work due to water resistance:
[tex]E = U_{f} + K_{f} + W_{disp}[/tex] (4)
Now we proceed to solve the exercise in each case:
a) Nonconservative Work ([tex]F = 5\,N[/tex], [tex]y_{o} = 1.8\,m[/tex], [tex]y_{f} = 0\,m[/tex])
[tex]W_{disp} = (5\,N)\cdot (1.8\,m - 0\,m)[/tex]
[tex]W_{disp} = 9\,J[/tex]
Final Gravitational Potential Energy ([tex]m = 2.5\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{f} = 0\,m[/tex])
[tex]U_{f} = (2.5\,kg) \cdot \left(9.807\,\frac{m}{s^{2}}\right)\cdot (0\,m)[/tex]
[tex]U_{f} = 0\,J[/tex]
Final Translational Energy ([tex]m = 2.5\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{o} = 1.8\,m[/tex], [tex]U_{f} = 0\,J[/tex], [tex]W_{disp} = 9\,J[/tex])
[tex]K_{f} = (2.5\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (1.8\,m) -0\,J-9\,J[/tex]
[tex]K_{f} = 35.131\,J[/tex]
b) Nonconservative Work ([tex]F = 5\,N[/tex], [tex]y_{o} = 1.8\,m[/tex], [tex]y_{f} = 0.50\,m[/tex])
[tex]W_{disp} = (5\,N)\cdot (1.8\,m - 0.5\,m)[/tex]
[tex]W_{disp} = 6.5\,J[/tex]
Final Gravitational Potential Energy ([tex]m = 2.5\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{f} = 0.5\,m[/tex])
[tex]U_{f} = (2.5\,kg) \cdot \left(9.807\,\frac{m}{s^{2}}\right)\cdot (0.5\,m)[/tex]
[tex]U_{f} = 12.259\,J[/tex]
Final Translational Energy ([tex]m = 2.5\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{o} = 1.8\,m[/tex], [tex]U_{f} = 12.259\,J[/tex], [tex]W_{disp} = 6.5\,J[/tex])
[tex]K_{f} = (2.5\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (1.8\,m) -12.259\,J-6.5\,J[/tex]
[tex]K_{f} = 25.373\,J[/tex]
c) Nonconservative Work ([tex]F = 5\,N[/tex], [tex]y_{o} = 1.8\,m[/tex], [tex]y_{f} = 1\,m[/tex])
[tex]W_{disp} = (5\,N)\cdot (1.8\,m - 1\,m)[/tex]
[tex]W_{disp} = 4\,J[/tex]
Final Gravitational Potential Energy ([tex]m = 2.5\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{f} = 1\,m[/tex])
[tex]U_{f} = (2.5\,kg) \cdot \left(9.807\,\frac{m}{s^{2}}\right)\cdot (1\,m)[/tex]
[tex]U_{f} = 24.518\,J[/tex]
Final Translational Energy ([tex]m = 2.5\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{o} = 1.8\,m[/tex], [tex]U_{f} = 24.518\,J[/tex], [tex]W_{disp} = 4\,J[/tex])
[tex]K_{f} = (2.5\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (1.8\,m) -24.518\,J-4\,J[/tex]
[tex]K_{f} = 15.614\,J[/tex]
the current through a wire is measured as the potential difference is varied what is the wire resistance
Answer:
Resistance, R = 0.02 Ohms
Explanation:
Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.
Mathematically, Ohm's law is given by the formula;
V = IR
Where;
V is the voltage or potential difference.
I is the current.
R is the resistance.
From the attachment, we would pick the following values on the graph of current against voltage;
Voltage, V = 0.5 V
Current = 25 A
To find resistance;
R = V/I
R = 0.5/2.5
Resistance, R = 0.02 Ohms
Note:
Resistance (R) is the inverse of slope i.e change in current with respect to change in voltage.
A fan that is rotating at 960 rev/s is turned off. It makes 1500 revolutions before it comes to a stop. a) What was its angular acceleration(assuming it was constant)
Answer:
α = 1930.2 rad/s²
Explanation:
The angular acceleration can be found by using the third equation of motion:
[tex]2\alpha \theta=\omega_f^2-\omega_i^2[/tex]
where,
α = angular acceleration = ?
θ = angular displacement = (1500 rev)(2π rad/1 rev) = 9424.78 rad
ωf = final angular speed = 0 rad/s
ωi = initial angular speed = (960 rev/s)(2π rad/1 rev) = 6031.87 rad/s
Therefore,
[tex]2\alpha(9424.78\ rad) = (0\ rad/s)^2-(6031.87\ rad/s)^2\\\\\alpha = -\frac{(6031.87\ rad/s)^2}{(2)(9424.78\ rad)}[/tex]
α = - 1930.2 rad/s²
negative sign shows deceleration
Two resistors with resistance values of 4.5 Ω and 2.3 Ω are connected in series or parallel across a 30 V potential difference to a light bulb. a. Calculate the current delivered through the light bulb in the two cases. b. Draw the circuit connection that will achieve the brightest light bulb
Answer:
plz mark as a pure substance abuse and function of the equation for sulphur dioxide emissions and function of the equation for sulphur dioxide emissions and function of the equation for sulphur dioxide emissions and function of the equation for sulphur dioxide emissions and function of the equation forAs a basketball player starts to jump for a rebound, he begins to move upward faster and faster until he leaves the floor. During this time that he is in contact with the floor, the force of the floor on his shoes is:
Answer:
The force of the floor on his shoes is bigger than his weight.
Explanation:
From Newton's third law of motion which states that to every action there is an equal an opposite reaction, we can say that the ground exerts additional force on the basketball player, thereby overcoming his weight and pushing him off the ground.
So, when the basketball player jumps, his muscles contract or extend appropriately which in turn creates an additional force on the ground. Hence, the force of the floor on his shoes is bigger than his weight.
Define capacitance of a parallel plate capacitor and state one application of it in electric circuit?
Answer:
The capacitance of a parallel plate capacitor is the quantity of charge the capacitor can hold.
This capacitance is proportional to the area of the any of the two plates (if the area of the plates are the same), or the smaller of the two plates (if the plates have different areas) and inversely proportional to the square of the distance of separation (or thickness of the dielectric material) between the plates. It is mathematically expressed as;
C = Aε₀ / d
Where;
C = capacitance
A = Area of one of the plates.
d = distance between the plates
Some of the applications of capacitance (or simply a capacitor) in an electric circuit are;
i. For storage of electrostatic energy.
ii. For filtering and tuning of circuits.
Modern wind turbines are larger than they appear, and despite their apparently lazy motion, the speed of the blades tips can be quite high-many times higher than the wind speed. A turbine has blades 53m long that spin at 14 rpm.
Required:
a. At the tip of a blade, what is the speed?
b. At the tip of a blade, what is the centripetal acceleration?
Explanation:
Given that,
The length of the blades, l = 53 m
The angular velocity = 14 rpm = 1.466 rad/s
(a) The speed at the tip of a blade.
[tex]v=r\omega\\\\=53\times 1.466\\\\=77.69\ m/s[/tex]
(b) The centripetal acceleration at the tip of the blade is :
[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{77.69^2}{53}\\\\a=113.88\ m/s^2[/tex]
Hence, this is the required solution.
What requirement must a force acting on a object satisfy in order for the object to undergo simple harmonic motion?
Answer:
Simple harmonic motion is the movement of a body or an object to and from an equilibrium position. In a simple harmonic motion, the maximum displacement (also called the amplitude) on one side of the equilibrium position is equal to the maximum displacement.
The force acting on an object must satisfy Hooke's law for the object to undergo simple harmonic motion. The law states that the force must be directed always towards the equilibrium position and also directly proportional to the distance from this position.
In order to achieve the condition of simple harmonic motion, the force must be directed always towards the equilibrium position and also directly proportional to the distance from this position.
The given problem is based on the concept and fundamentals of simple harmonic motion. Simple harmonic motion is the movement of a body or an object to and from an equilibrium position.
In a simple harmonic motion, the maximum displacement (also called the amplitude) on one side of the equilibrium position is equal to the maximum displacement.The force acting on an object must satisfy Hooke's law for the object to undergo simple harmonic motion. The law states that the force must be directed always towards the equilibrium position and also directly proportional to the distance from this position.Thus, we can conclude that in order to achieve the condition of simple harmonic motion, the force must be directed always towards the equilibrium position and also directly proportional to the distance from this position.
Learn more about the Simple Harmonic motion here:
https://brainly.com/question/17315536
Uranus and Neptune may have a compressed liquid water ocean beneath their atmospheres. What three pieces of evidence support this conclusion?
Answer:
Distance from sun, orbit and rotation. Presence of interior oceans, and elements that forms compressed water.
Explanation:
Both the planets are Jovian planets and have layers formed by ice such as that of Uranus does not have any surface. Such as the planet is only rotating fluids. While 80% of the mass of Neptune is made up of fluids or icy water and also consists of ammonia and methane.A 70-kg astronaut (including spacesuit and equipment) is floating at rest a distance of 13 m from the spaceship when she runs out of oxygen and fuel to power her back to the spaceship. She removes her oxygen tank (3.0 kg) and flings it away from the ship at a speed of 15 m/s relative to the ship.
Required:
a. At what speed relative to the ship does she recoil toward the spaceship?
b. How long must she hold her breath before reaching the ship?
Answer:
Explanation:
mass of the astronaut including the spacesuit, [tex]M=30[/tex]
distance of astronaut from the spaceship, d = 13 m
mass of the oxygen tank, m = 3 kg
Speed of tank with respect to spaceship, [tex]v=15~m/s[/tex]
a)
Using the conservation of linear momentum:
total momentum before collision = total momentum after collision
[tex]M.u=m.v+(M-m)v'[/tex]
[tex]0=3\times 15+(70-15)\times v'[/tex]
[tex]v'=0.82~m/s[/tex]
b)
She mush hold her breath until she reaches the spaceship, i.e.
[tex]t=d/v'[/tex]
[tex]t=13/0.82[/tex]
[tex]t=15.89~s[/tex]
