Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
how do i make chrystals using home suppplies
You could use sodium accetate a put it in water...
Why is it important to know characteristics that matter undergoes in chemistry? How can we analyze the relationships between chemical and physical changes and properties?
Extension Questions: What is the study of Chemistry? Who are some of the important people who have contributed to the field? How do regular Americans interact with Chemistry around them?
How can we understand the historical development of the Periodic Table and apply its predictive power?
Extension Questions: Describe different chemical principles and systems. How does the layout of the periodic table allow you predict other element's properties? Consider all types and groups of elements.
Why is it important to know and understand the historical development of atomic theory?
Extension Questions: How does the atom relate to the elements of the periodic table? What are your most common models and how do they relate to the current atomic model? What theories don’t hold true today if any?
How do atoms combine to form ionic, covalent, and metallic bonds?
How can we write and balance chemical equations using the law of conservation of mass?
Answer:
Chemistry is important because everything you do is chemistry! Even your body is made of chemicals. Chemical reactions occur when you breathe, eat, or just sit there reading. All matter is made of chemicals, so the importance of chemistry is that it's the study of everything.
Explain how an aqueous acidic solution differs from an aqueous basic solution according to the Arrhenius theory for acids and bases
Answer:
An Arrhenius acid is a substance that associates in water to form hydrogen irons (H+) In other words an acid increases the concentration of H+ ions in an aqueous solution
How are plate tectonics and the rock cycle connected
Answer:
All igneous rocks the basis of the rock cycle are formed by plate tectonics. ... The heat from the mantle that fuels plate tectonics causes both igneous and sedimentary rocks to be turned into metamorphic rocks. The metamorphic rocks can be eroded into sedimentary rocks are remelted back into igneous.
Explanation:
Please help will mark brainliest!! What is the main point of paragraph 3?
Answer:
the highest frequency
Explanation:
3. Describe the process behind how students recover an individual's remains from a surface grave.
Answer:
By using the techniques of archeology.
Explanation:
Students recover an individual's remains from a surface grave by using the techniques of archeology field to scrape away the layers of soil from that remains in a way that the remains can't be damaged. If they find the remains within 10 centimeters of digging, they can dig down further in order to dig out all the remains safely. The instruments of archeology field are used because they are light and can be used to dig out fossils of ancient organisms.
If 5 moles of sugar was added to a kilogram of water, the new boiling point would be _____ degrees C.
Write your answer to the nearest hundredth.
Answer: 102.56
Explanation: I just took the K12 test and this is my answer.
what are things than can circulate
A tank contains helium gas at 585 mmHg, nitrogen gas at 0.76 atm, and neon at 940 torr. What is the total pressure
Answer:
2.77 atm
Explanation:
The total pressure of a mixture of gases is calculated as the addition of the partial pressures of the gases. In this case, the total pressure (Pt) is calculated from the partial pressures of helium (PHe), nitrogen (PN₂) and neon (PNe):
Pt = PHe + PN₂ + PNe
First, we have to convert the partial pressures to the same unit (atm). For this, we have to know that 1 atm=760 mmHg=760 Torr
PHe = 585 mmHg x 1 atm/760 mmHg = 0.77 atm
PN₂= 0.76 atm
PNe= 940 Torr x 1 atm/760 Torr = 1.24 atm
Finally, we calculate the total pressure in atm:
Pt = 0.77 atm + 0.76 atm + 1.24 atm= 2.77 atm
1 When 25 cm of 1.0 mol/dmº copper sulfate solution was mixed vith an excess of zinc
powder, the temperature of the solution rose by 50.6 °C. Calculate the energy change
for the reaction in kJ/mol.
CuSO4(aq) + Zn(s) + Cu(s) + ZnSO4(aq)
?
Answer:
See explanation
Explanation:
From the formula for heat;
q (enthalpy change) = (mass of solution) x (specific heat capacity) x (temperature change)
Since the density and heat capacity of the solution are the same as that of pure water.
Mass of copper sulphate solution = 50 g
Heat = 50 * 4.18 * 50.6°C
Heat = 10575.4 J
Number of moles = 1 * 25/1000 = 0.025 moles
10575.4 J/ 0.025 moles = 432016 J/mol/1000
= 423 KJ/mol
or
q = - 423 KJ/mol
Kidneys remove what kind of waste from the body? A. Undigested food B. Carbon dioxide C. Oxygen D. Nitrogen waste
Answer:
Option D: nitrogen waste
Explanation:
Excretion.
This is removal from of waste products of chemical reactions. It involves the eliminating excess water and salts taken in with our human diet and also spent hormones
Nitrogenous waste products are the human waste products which contain nitrogen and are poisonous to the body.
The kidneys is responsible for the remove of Nitrogenous waste, water, salts, toxins, hormones e. t. c. It is the are the main principle excretory organs. They maintain the constant concentration of materials in the body.
During photosynthesis, plants change light energy into:
chemical energy
solar energy
mechanical energy
electrical energy
i will mark brainlest
Answer:
chemical energy
Explanation:
just put that
Answer:
chemical energy
Explanation:
it is the light dependent reaction
A wildfire destroys most of the plant life in a forest. What would most likely happen to the animals that lived in the forest?
Answer:
They would be pushed out and lose their homes
Explanation:
A wildfire destroys most of the plant life in a forest. Animals would be pushed out and lose their homes.
What is wildfire?An unplanned, uncontrolled, and unpredictable fire inside an area of flammable vegetation is known by several names, including wildfire, bushfire, bushfire, wildland fire, and rural fire. A wildfire may be more precisely referred to by the terms bushfire, desert fire, forest fire, hill fire, peatland fire, prairie fire, vegetable fire, or veld fire, depending on the kind of vegetation that is present.
Wildfires are separate from controlled and prescribed burning, which is a good human use of wildland fire, even though controlled burns have the potential to turn into wildfires. Wildfires likely started shortly after terrestrial plants first appeared, which occurred in the Silurian epoch 419 million years ago, according to fossil charcoal. A wildfire destroys most of the plant life in a forest. Animals would be pushed out and lose their homes.
Therefore, animals would be pushed out and lose their homes.
To know more about wildfire, here:
https://brainly.com/question/12110285
#SPJ3
A tall plant (Tt) is crossed with a short plant (tt). What percent will be short?
Group of answer choices
75%
0%
100%
50%
25%
it should be 50/50 percent
so 50%
hopefully this is right !
What is the percent composition of Mg in the compound Mg3(PO4)2?
Question 8 options:
A. 23.57%
B. 21.92%
C. 27.74%
D. 32.32%
Answer:
c
Explanation:
trust me its reasonanle
Per cent composition of Magnesium (Mg) in Magnesium Phosphate compound ie [tex]Mg_3(PO_4)_2[/tex] is 27.74%. Hence, option C is correct.
What is per cent?Percent is from the Latin adverbial phrase per centum meaning “by the hundred.”
Determination of the percentage composition of Mg in Mg₃(PO₄)₂
Molar mass of Mg₃(PO₄)₂ = 262 g/mol
Mass of Mg in Mg₃(PO₄)₂ = 24×3 = 72 g
Percentage composition of Mg =?
[tex]Percentage = \frac{Mass \;of \;elements x 100}{Mass \;of \;compound}[/tex]
[tex]Percentage = \frac{72 X 100}{262}[/tex]
27.74%.
Hence, option C is correct.
Learn more about per cent here:
https://brainly.com/question/21311916
#SPJ2
How are beef and gas productions related to methane levels?
Plzzz answer quick
Answer:
Cows and other ruminant animals (like goats and sheep) emit methane, a potent greenhouse gas, as they digest grasses and plants. This process is called “enteric fermentation,” and it's the origin of cows' burps.
Explanation:
What is the application of flotation
Answer:
The law of floatation is applied in all vessels which travel by waterways that include ships, submarines and ferry boats. It is also applied in some vessels which travel by air ways such as hot air balloon and air ship. Balloons of different colors and shapes are filled with lighter gas so that will float in air.
Answer:
*hot air balloon
*swimming
Explanation:
sna makatulong po:)
Can i titrate a solution of unknown concentration with another solution of unknown concentration and still get a meaningful answer
Answer:
No, I don't think so at least
Explanation:
In chemistry, you do calculations to find the concentration of a solution with another solution of KNOWN concentration. Without concentrations of either solution, were would you get values from? Where would you start? :3
You can not titrate a solution of unknown concentration with another solution of unknown concentration and still get a meaningful answer.
Titration involves the standardization of unknown solution using a standard solution. By this definition, titration must involve a standard solution.
Since the two unknown solutions are not standardized, we can never get a meaningful answer because we can not be able to perform any calculation unless we have a standard solution.
Learn more: https://brainly.com/question/2728613
In the atmosphere, it is more common to find two oxygen molecules joined together than to find a single atom of oxygen. Why? What would that molecule look like? What would this molecule be called?
Answer:
See explanation
Explanation:
Oxygen has six electrons in its outermost shell. This means that its octet can be completed when it shares two electrons with another oxygen atom.
In a covalent bond, each bonding atom contributes one electron to the bond. This means that four electrons are shared between two oxygen atoms. Each atom contributes a total of two electrons which are shared. This molecule of oxygen satisfies the octet rule rather than a single atom of oxygen.
An image of the oxygen molecule is attached to this answer.
This system of two oxygen atoms joined together in a covalent bond is called an oxygen molecule(O2).
how do i break my leg
Answer:
why would u want 2?
Explain in the comments why.
Many angiosperms rely on animals for
A fertilization
B pollination
C photosynthesis
D transpiration
Molar Mass:
Find the molar masses of the following compounds. Also report the number of atoms in the compound:
1) NaBr
2) PbSO4
3) Ca(OH)2
4) Na3PO4
5) (NH4)2CO3
6) C6H12O6
7) Fe3(PO4)2
8) (NH4)2S
9) Zn(C2H3O2)2
10) AgF
Answer:
Atomic models are important because, they help us visualize the interior of atoms and molecules, and thereby predicting properties of matter.
Explanation:
We study the various atomic models in our course of study because, it is important for us to know, how did people come to the present concept of an atom. How did physics evolve from classical to quantum physics.
All these are important for us to know and thus, knowledge about various atomic models, their discoveries and drawbacks and finally improvements based on scientific evidence present at that time is important for us to understand the underlying theory very well.
Explanation:
A DAY IN THE LIFE OF METIS JOURNAL. I WROTE IT HOPE U LIKE IT XD
We, who live in the west, were Nomadic. So we always moved from place to place to hunt buffalo and other fur-bearing animals. And now again we have to shift everything we collected , like, all the essential needs we collected. It’s really hard to shift stuff, But when you move to a new place you get to see new beautiful places. They are just so satisfying to see! It’s like all my work(like the shifting work) is paid off. I love it! We always meet the Hudson’s bay company employees, and give them furs which we took from the bissons and other furry animals we hunted. And in exchange they give us their (Hudson’s Bay company) goods. Which is good! Because then we or I won't be able to enjoy that delicious pemmican!
The one reason that makes me proud of my parents is that because of them I am like a translator for both sides in the fur trade! Anyways coming back to the present. As I said before, we were moving today to another place, But on the way some people along with my father will ride the famous York boats carrying supplies to fur posts. I begged my father to take me with him! And as usual he gave me some silly reason for me to stay. And now since I don’t have anything to do I will-..Nevermind, My mom’s calling me. Okay after helping my mom keep the fur posts into the York boats me , my mom, and the others are just relaxing and enjoying nature just to take a break. Since, I am so obsessed with my Journal notebook today I’m just going to sit here and right what comes to my mind. I’m not like the others who always seem to be talking with someone. I like my own space!
I kind of miss my dad already, but he and his fellow members need to travel the waterways from the red river further west and north to hudson bay. These red river carts also travel the trek back and forth over land to St. Paul, Minnesota and to posts in saskatchewan. Speaking about the red river, the only large settlement in the region is the red colony. About 12000 people lived in this colony around Fort Garry. Some were the original Selkirk settlers or their descendents. They had come from Scotland with lord Selkirk when he established the colony in 1811. Many of these original settlers were poor farmers who had been displaced from their lands in scotland. They had endured many hardships in the early years of settlement, including foods, hunger, and sickness. I love studying about other colonies, cultures , history etc.
if 13 moles of Fe react, what is the mass of FeS produced?
Answer:
1144 g of FeS
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
Fe + S —> FeS
From the balanced equation above,
1 mole of Fe reacted to produce 1 mole of FeS.
Therefore, 13 moles of Fe will also react to produce 13 moles of FeS.
Finally, we shall determine mass of 13 moles of FeS. This can be obtained as follow:
Mole of FeS = 13 moles
Molar mass of FeS = 56 + 32
= 88 g/mol
Mass of FeS =?
Mass = mole × molar mass
Mass of FeS = 13 × 88
Mass of FeS = 1144 g
Therefore, 1144 g of FeS were obtained from the reaction.
Please help this is due soon and I’ll mark you brainiest if you can help
Answer:
I think it's either A or D I'm not sure hope that I helped you.
Pl help it’s for a grade and I can’t find it
Answer:
personally I think it's a but it could also be D.
But yeah personally I would say A
I’ll really appreciate it if you help me out with these 2 questions .
What is a fault, and how does the existence of faults support the theory of plate tectonics?
“Many of the objections are long standing but apparently unknown to many geophysicists, while some are peculiar to the new global tectonics. The conclusions drawn, in order of probability, are (1) the continents have almost certainly not moved with respect to each other; (2) convection is not active throughout the whole mantle; (3) even if convection is active in the upper mantle it cannot account for drift; (4) pole positions derived from paleomagnetism, and results of this method of investigation in its global form generally, are afflicted with an unknown cause of error and are in any case too inexact for drift reconstructions.”
(Wesson, 1972)
Which organ detects stimuli from the environment and is part of the nervous system?
Group of answer choices
A. eye
B. stomach
C. heart
D. lungs
It's the eye because it's the organ of sight
Explain why the temperature of the water decreased when the cold water was added to the hot water
Answer:
The water is clearly close to boiling temperature when you add the ice. So, initially the ice cools the water that is near it to near 0degC. Water between about 0 and 8 degrees is more dense than hotter water, so the cold water sinks to the bottom.Jun 14, 2020
Hope this helps if so don't hesitate to 'Thanks' and/or 'brainliest' this answer!
Answer:
hot water has more melting point
Explanation:
hot water has more melting point
hot water cpyld be boiled
