Answer:
scientists might modify or revise a hypothesis after a trial run that didn't go how they thought.
1.7 A7V battery delivers a 0.6 A current to an electric motor connected across its terminals . a) What power is delivered to the motor? b) If the motor runs for 6 minutes, how much electric energy is delivered to the motor?
Answer:
P=4.2V E=1512J
Explanation:
P=?
P=VI
Putting the values
P=2*0.6
P=4.2VE=?
E=P*t
E=4.2*6*60
E=1512JAn ant crawls 50 cm to the right, stops, and then crawls 30 cm to the left. Calculate the distance that the ant travels, and calculate the displacement of the ant.
Answer and Explanation:
If the ant was to crawl 50cm to the right, then come back 30 cm, then the total distance walked would be 80cm.
- Combine 50cm and 30cm to get 80 cm.
For displacement, the answer is 20 cm.
- When calculating displacement, you use the initial (starting) distance. and subtract that from the final distance, giving you the displacement, or the amount traveled from the starting point to the final point if you were to make a straight line from the starting point to end point. (0 to 50, then back 30 the same direction, so subtract 30 from 50 to get 20)
#teamtrees #PAW (Plant And Water)
I hope this helps!
Answer:
Distance = 80cm
Displacement = 20cm
Explanation:
Distance does not depend on direction, its the total amount traveled.
Displacement has a direction. Displacement is how far your stopping point is from the beginning point.
The ant could have walked 50cm to the east, stopped and turned around, walked 50cm to the west, walking a total distance of 100cm, but the displacement would be 0 because he ended up at the same spot that he started. It can get much more complicated than this, but this is a good start.
a simple machine has efficiency 90℅ what does it mean
Explanation:
A simple machine has efficiency 90℅, it means that 90% of the applied force is used in doing useful work and 10% is wasted due to overcoming friction.
Grive reasons The units of force and pressure are called derived units. an
How ??
Force:-
We know
According to newtons second law
[tex]\boxed{\sf Force=Mass\times Acceleration}[/tex]
[tex]\\ \sf\longmapsto Force=kgm/s^2[/tex]
We don't use it
[tex]\\ \sf\longmapsto Force=Newton(N)[/tex]
Hence its a derived unit.
Pressure:-
[tex]\\ \sf\longmapsto Pressure=\dfrac{Force}{Area}[/tex]
[tex]\\ \sf\longmapsto Pressure=\dfrac{N}{m^2}[/tex]
[tex]\\ \sf\longmapsto Pressure=Pascal(Pa)[/tex]
Hence its a derived unit
HELP PLEASE
I think it’s B but I could be wrong. Please help!
What is the goal of a theory?
B. To analyze data from an experiment
D. To control the outcome of an experiment
Option C,
The goal of a theory is to explain natural and physical phenomena.
Hope it helps you...
Pls mark brainliest if it helps you...
(Answered by Benjemin)
What would make oppositely charged objects attract each other more?
o increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object
O decreasing the positive charge of the positively charged object and decreasing the negative charge of the negatively charged object
O increasing the distance between the positively charged object and the negatively charged object
O maintaining the distance between the positively charged object and the negatively charged object
Answer:
a: increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object
Explanation:
The oppositely charged objects attract each other more is option a. It increased the positive charge and the negative charge.
The Attraction of the oppositely charged:At the time when the oppositely charged objects are attracted to each other more so here the positive charge should be increased with respect to the positive charge object and the negative charge is increased with respect to the negative charge object
Hence, the first option is correct.
Learn more about an object here: https://brainly.com/question/19587294
c. A car was running with a velocity of 20m/s. what will be its velocity after 30s if it's acceleration is 5m/s2
[tex] \large \mathfrak{Solution : }[/tex]
let's use first equation of motion to solve this ;
[tex] \boxed{ \boxed{ v = u + at}}[/tex][tex]v = 20 + (5 \times 30)[/tex][tex]v = 20 + 150[/tex][tex]v = 170 \: \: m/s[/tex]Velocity after 30 seconds = 170 m/s
At the end of a race, a runner decelerates from a velocity of 9.00 m/s at a rate of 2.00 m/s2 .
(a) How far does she travel in the next 5.00 s?
(b) What is her final velocity?
(c) Evaluate the result. Does it make sense?
Answer:
20m; -1m/s; doesn't make sense.
Explanation:
(a) v=u-at
v=9-2×5
v=-1 m/s
Now, v²=u²-2as
(-1)²=(9)²-2×2×s
4s=81-1=80
s=80/4=20m
(b) v=u-at
v=9-2×5
v=-1 m/s
(c) A runner starts the race at a velocity of 9 m/s and then decelerates at a rate of 2m/s² and her final velocity is -1m/s. This doesn't make sense because that negative final velocity means the runner is running backwards.
If Sally could drive a Jetson's flying car at a constant speed of 530.0 km/hr across oceans and space, approximately how long (in years) would she take to drive to a solar system object 10.0 AU away
Which of the following measurement
tools would you need to determine the
weight of an iPad?
A. graduated cylinder
B. double pan balance
C. scale
D. triple beam balance
Answer:
It would be C.scale, because
A. is for liquid
B. is for measuring 2 things
and D. is for i don't know(lol)
but i think the scale would be the easiest way to measer an iPad
A car, initially traveling 28.0ft/s, steadily speeds up to 50.0ft/s in 7.40s. Determine all unknowns and answer the following question.
How far did the car travel during this time?
Explanation:
Given:
[tex]v_0 = 28.0\:\text{ft/s}[/tex]
[tex]v = 50.0\:\text{ft/s}[/tex]
[tex]t = 7.40\:\text{s}[/tex]
First, we calculate the acceleration of the car during this time:
[tex]v = v_0 + at \Rightarrow a = \dfrac{v - v_0}{t}[/tex]
Plugging in the given values, we get
[tex]a = \dfrac{50.0\:\text{ft/s} - 28.0\:\text{ft/s}}{7.40\:\text{s}} = 2.97\:\text{ft/s}^2[/tex]
Now that we have the value for the acceleration, we can solve for the distance traveled during the time t:
[tex]x = v_0t + \frac{1}{2}at^2[/tex]
[tex]\:\:\:\:=(28.0\:\text{ft/s})(7.40\:\text{s})[/tex]
[tex]\:\:\:\:\:\:\:\:\:\:\:\:+ \frac{1}{2}(2.97\:\text{ft/s}^2)(7.40\:\text{s})^2[/tex]
[tex]\:\:\:\:= 289\:\text{ft}[/tex]
the processes used to gain knowledge are called ____ development
5. A police car siren emits a frequency of 3900 Hz while driving down the road at a speed of 27.4. What frequency will a person
driving a car at 20.7 m in the opposite direction behind the police car hear?
fobs =
Hz
Answer:
f = 3900(343 - 20.7) / (343 + 27.4) = 3,394 Hz
If My mom is 40 and my goldfish died what is my favorite color ?
Answer:
square
Explanation:
+=-=
Answer:
SɴOWʙʟØWɘR
Explanation:
if an object is accelerating at 4 m/s^2 and has a mass of 8 kg, what is the net
force (in newtons, N) on the object?
Answer:
The force applied is 32 N
Explanation:
F = ma
F = 8 × 4
F = 32 N
Answer:
[tex]\boxed {\boxed {\sf 32 \ Newtons}}[/tex]
Explanation:
We are asked to find the net force on an object. According to Newton's Second Law of Motion, force is the product of mass and acceleration. Therefore, the formula for calculating force is:
[tex]F= m \times a[/tex]
The mass of the object is 8 kilograms and its acceleration is 4 meters per second squared.
m= 8 kg a= 4 m/s²Substitute these values into the formula.
[tex]F= 8 \ kg \times 4 \ m/s^2[/tex]
Multiply.
[tex]F= 32 \ kg *m/s^2[/tex]
Convert the units. 1 kilogram meter per second squared is equal to 1 Newton. So, our answer of 32 kilogram meters per second squared is equal to 32 Newtons.
[tex]F= 32 \ N[/tex]
The net force on the object is 32 Newtons.
Write three or four sentences to describe the process by which the sound of a book dropped on a desk reaches your ear. (3 points)
why pet cats are not called Panthera Cantus.
Panthera is a genus within the family Felidae that was named and described by Lorenz Oken in 1816 who placed all the spotted cats in this group.
You have three flowers. You give
each a different amount of
water. What do you think is the
dependent variable?
Answer:
The plant growth height
Explanation:
4.
Assume that the center of the Tacoma Narrows Bridge roadway is about 60 m above the water. Ignore air
resistance.
How long would it take for a rock dropped from the bridge to reach the water?
a.
b. How fast would the rock be moving just before striking the water?
Answer:
iflwhat do I put in the fridge to get a better for my hair and I will get a better for sure I will get a
Explanation:
no
try not Helpful 6Helpful Question What are you doing a good job and why is this article is for you and I am going up to the store
can someone help me this question
Answer:
Volume of wood is 68-50 = 18 cm³
Explanation:
Hope it helps youBáo cáo thực hành
Bài 1: Sóng trên dây: https://phet.colorado.edu/vi/simulation/wave-on-a-string
Bài 2: Cầu cân bằng: https://phet.colorado.edu/sims/html/circuit-construction-kit-dc-virtual-lab/latest/circuit-construction-kit-dc-virtual-lab_vi.html
Answer:
which language is this
Explanation:
In the study of Physics, the "Universal Gas Law" is not considered a law at
all.true or false
Answer: It’s False hope this helps
Explanation:
The answer is False, the Universal Gas Law" is considered law in Physics.
The universal gas law is considered law in physics and it states that the product of the Pressure and Volume of a given mass of gas is equivalent to the product of the number of moles, Boltzmann constant, and the temperature.
It is also known as the Ideal gas equation and is expressed mathematically as:
PV = nRT where:
P is the pressure
V is the volume
n is the number of moles
R is the Boltzmann constant
T is the absolute temperature.
Hence from the above definition, we can see that Universal Gas Law" is also considered a law in physics. The answer is False
Learn more here: https://brainly.com/question/21912477
Yo someone help me on dis jawnt rq plzzz!
Answer:
the answer is 45.6 kg = 45600 g
A particle is projected from a point on a horizontal plane and has an initial velocity of 28root 3 m/s at an angle of 60 degree .find the greatest heights reached by the particle
Answer:
uujjjjjctc7tox7txr9ll8rz8lr5xl8r6l8dl85x8rl5x8rl5x8rl5xrx8l58rk5xr8l5xr6l8xr68lc
The temperature at which water leaves the boiler is?
Answer:
The average setting for a gas-powered hot water boiler is 180°F. This provides the appropriate level needed for most cold weather temperatures. If you can raise the temperature manually, do not set it any higher than 210°F (which is often the limit), and try to remain down at 190°F if you need the extra heat.
Which of the following materials can be charged: plastic, glass, metal? 
• This question comes from the study of electrostatics.
Materials that can be charged from the options are; plastic and glass.
• Now, among the 3 listed materials, plastic and glass are insulators whereas metal is a conductor because it can conduct electricity.
• With respect to insulators and conductors as regards charging by electrostatics, we can say that in conductors if you charge a portion of them, the charges inside will have the freedom of movement. However, inside of the material, If a charge is added in another portion of the conductor, the previously introduced charges will combine to neutralize this new charge.
• With respect to insulators, the charges that are put at the surface of the object will remain there because unlike conductors, these insulators do not allow for freedom of movement of charges inside the material that could neutralize.
• Thus, the materials that can be charged by rubbing are plastic and glass.
• Read more here; brainly.in/question/32842271
A projectile is launched with an initial speed of 15.5 m/s at an angle of 78 degrees above the horizontal,
What are the x and y components of the initial velocity?
Answer:
Explanation:
The formula for the x-components of the velocity vector is
[tex]V_x=Vcos\theta[/tex] and for the y-components it is
[tex]V_y=Vsin\theta[/tex] where V in both of those formulas is the magnitude of the velocity.
For the x-component, taking into consideration significant digits:
[tex]V_x=15.5cos(78)\\V_x=3.2\frac{m}{s}[/tex]
For the y-component, taking into consideration significant digits:
[tex]V_y=15.5sin(78)\\V_y=15\frac{m}{s}[/tex]
A truck travels 40 m while slowing down from 15 m/s to 10 m/s. How long does it take to do this?
Answer:
4s
Explanation:
An AC generator consists of eight turns of wire, each having area A =9.0x 10-2 m2, with a total resistance of 12.0 V. The coil rotates in a magnetic field of 0.500 T at a constant frequency of 60.0 Hz, with axis of rotation perpendicular to the direction of the magnetic field. (a) Find the maximum induced emf. [3] (b) What is the maximum induced current? [1] (c) Determine the induced emf and current as functions of time. [2] (d) Wiat maximum torque must be applied to keep the coil turning? (3)
We have that the maximum induced emf,the maximum induced current, the induced emf and current as functions of time,The maximum torque must be applied to keep the coil turning are
a )[tex]E_{max}=135.6v[/tex]
b) [tex]I_max=11A[/tex]
c) [tex]I_i=11A sin(376.9rad/s t)[/tex]
[tex]E_i=135.6v sin(376.9rad/s )[/tex]
d) [tex]T=4.07Nm[/tex]
From the Question we are told that
Area [tex]A =9.0x 10^{-2} m^2[/tex]
Total resistance of [tex]R=12.0 V.[/tex]
Magnetic field of [tex]B=0.500 T[/tex]
Constant frequency [tex]F=60.0 Hz[/tex]
Eight turns [tex]N=8N[/tex]
A)
Generally the equation for the maximum induced emf is mathematically given as
[tex]E=NAB\omega[/tex]
Where
[tex]\omega=2\pi f[/tex]
[tex]\omega=2*3.142*60[/tex]
[tex]\omega=376.9rad/s[/tex]
[tex]E_max=8*(9.0x 10-2)*0.5*376.9[/tex]
[tex]E_{max}=135.6v[/tex]
B)
Generally the equation for the maximum induced Current is mathematically given as
[tex]I_m=\frac{E}{R}\\\\I_max=\frac{135.6}{12}\\\\I_max=11A[/tex]
C)
Generally for the induced emf and current as functions of time we Substitute [tex]E_{max}[/tex] and [tex]\omega[/tex] into
[tex]E_i=E_{max} sin\omega t[/tex]
[tex]E_i=135.6v sin(376.9rad/s t)[/tex]
And Same for induces Current
[tex]I_i=I_{max} sin\omega t[/tex]
[tex]I_i=11A sin(376.9rad/s t)[/tex]
D)
Generally the equation for the maximum torque is mathematically given as
[tex]T = rB sin θ[/tex]
Where
r= maximum magnetic moment
[tex]r=NIAr= 8*11.3*0.090r=8.14m^2[/tex]
Therefore
[tex]T = 8,14*0.500 sin 90[/tex]
[tex]T=4.07Nm[/tex]
For more information on this visit
https://brainly.com/question/23285250
what is kinematics ??? -,- xD
Answer:
Basically, it's motion of a object.
100% smart.
Yup, 100% wrong.......
[tex]AnimeVines[/tex]
Answer:
the branch of mechanics concerned with the motion of objects without reference to the forces which cause the motion.Compare with dynamics.
Explanation:
i looked it up it