Convert 6.62 X 10^23 atoms to moles
Answer:
1.099
Explanation:
Hope this helps
Answer:
1.09944660051578e-23
Explanation:
Explain the term mole ratio in your own words When would you use this term ?
Answer:
A mole ratio is the ratio between the amounts in moles of any two compounds involved in a chemical reaction.
Mole ratios are used as conversion factors between products and reactants in many chemistry problems.
Explanation:
b) Name three substances which can undergo sublimation and deposition respectively
solid carbon dioxide, iodine, arsenic, and naphthalene
Explanation:
Examples of substances that undergo sublimation
Examples of solids that sublime are dry ice (solid carbon dioxide), iodine, arsenic, and naphthalene (the stuff mothballs are made of).
How many moles are there in 87.2 g of zinc fluoride?
Answer:
what I got was 0.8435160945347224 moles
6. Menthol is a member of the terpene family of natural products. It exists in a (1R, 2S, 5R) form and a (IS, 2R, 5S) form. Are these two compounds enantiomers or diastereomers?
One of the reactions used to inflate automobile air bags involves sodium azide (NaN₃).
2NaN₃ --> 2Na + 3N₂
Determine the mass of N₂ produced from 250.0 g NaN₃
Answer:
161.54 g of N₂
Explanation:
The balanced equation for the reaction is given below:
2NaN₃ —> 2Na + 3N₂
Next, we shall determine the mass of NaN₃ that decomposed and the mass of N₂ produced from the balanced equation. This is illustrated below:
Molar mass of NaN₃ = 23 + (3×14)
= 23 + 42 = 65 g/mol
Mass of NaN₃ from the balanced equation = 2 × 65 = 130 g
Molar mass of N₂ = 2 × 14 = 28 g/mol
Mass of N₂ from the balanced equation = 3 × 28 = 84 g
SUMMARY:
From the balanced equation above,
130 g of NaN₃ decomposed to produce 84 g of N₂.
Finally, we shall determine the mass of N₂ produced by the decomposition of 250 g of NaN₃. This can be obtained as follow:
From the balanced equation above,
130 g of NaN₃ decomposed to produce 84 g of N₂.
Therefore, 250 g of NaN₃ will decompose to produce
= (250 × 84)/130 = 161.54 g of N₂
Thus, 161.54 g of N₂ were obtained from the reaction.
Investigation Question: How do organisms get their genes?
THIS ANSWER SHOULD BE 3 OR MORE SENTENCES.
Answer:
from the chromosome..l dont know
Explain why the upper phase, after reflux, contained the 1-bromopentane, even though its expected density is 1.276 g/cm3, and the density of water is ~1.00 g/cm3. Think what is in the aqueous solution (e.g., what is the density of salt water
Answer:
The water is not pure i.e. It contains some hydroxide and bromobutane ions that is why the upper phase contains 1-bromopentane
Explanation:
The upper phase after reflux will contain 1-bromopentane even when its density is 1.276g/cm^3 because even though the density of water = 1.00g?cm^3 the water is not pure i.e. It contains some hydroxide and bromobutane ions making it to stay at the bottom while 1- bromobutane stays at the upper phase
How many oxygen atoms are in 3.30 g of quartz?
Answer:
3.30 gSiO2 / 60.085g SiO2 x 2 mol 0 / 1 mol SiO2 x (6.022*1023 ) = 6.61*1022 O atoms
Explanation:
What is another name for heat?
A
light energy
B.
infrared energy
C
Thermal energy
D
electromagnetic energy
Answer:
C
Explanation:
thermal energy is the another name for heat
The sky on Earth is blue because blue light is scattered through the atmosphere as the other colors of light pass
through undisturbed. Which nebulae have something similar happening?
Emission nebulae
Dark nebulae
Reflection nebulae
Planetary nebulae
Answer:
C
Explanation:
Help me! Who ever gets to answer and has the best answer gets brainliest (very easy!)
Answer:
Fires --> These consume fuel and convert chemical energy stored in that fuel into thermal light and sound energy.
Decay -->The breakdown of dead plants and animals releases thermal energy.
Earth --> Thermal energy comes from deep inside and it is called geothermal energy.
Nitrogen monoxide and hydrogen react to form nitrogen and water, like this: 2NO(g) 2H2(g) N2(g) 2H2O(g)Also, a chemist finds that at a certain temperature the equilibrium mixture of nitrogen monoxide, hydrogen, nitrogen, and water has the following composition:compoundpressure at equilibriumCalculate the value of the equilibrium constant Kp for this reaction. Round your answer to significant digits.
Answer:
hello your question is poorly written attached below is the complete question
answer : Kp = 4.75 * 10^-3
Explanation:
Kp = (76.4 * ( 50.3 )^2 )/ ((79.1)^2 * (80.6)^2 )
= 193298.876 / 40646490.2116
= 0.00475 ≈ 4.75 * 10^-3
attached below is the beginning part of the solution
The electric field around a positive charge will:
Aqueous copper (II) sulfate reacts with aqueous potassium fluoride to produce
a precipitate of copper (II) phosphate and aqueous potassium sulfate.
Answer:
CuSO₄(aq) + 2 KF(aq) = CuF₂ + K₂SO₄
Explanation:
The question is missing but I think it must be about writing and balancing the equation.
Let's consider the unbalanced equation for the reaction that occurs when aqueous copper (II) sulfate reacts with aqueous potassium fluoride to produce a precipitate of copper (II) fluoride (I fixed a mistake here) and aqueous potassium sulfate. This is a double displacement reaction.
CuSO₄(aq) + KF(aq) = CuF₂ + K₂SO₄
Since only K and F atoms are not balanced, we will get the balanced equation by multiplying KF by 2.
CuSO₄(aq) + 2 KF(aq) = CuF₂ + K₂SO₄
Which of the following will dissolve the fastest
Answer:
Saturated.
Explanation:
This explains the solute dissolving faster. It links with the definition of soaked with moisture; drenched.
Answer:
I believe the answer would be C. unsaturated. and for part 2 I believe would be A. hope that helps :)
The _______________________________________ of a plant cell are where photosynthesis takes place.
Answer:
chloroplast
Explanation:
Answer:
chloroplasts
Explanation:
What are the products of the balanced equation for the combustion of C8H17OH ?
A. 2C4H8(g)+H2O(l)
B. C8H17(s)+NaOH(aq)
C. 8CO2(g)+9H2O(l)
D. 8O2(g)+9H2O(l)
What is the coefficient for hydrogen in the balanced equation for the reaction of solid tungsten(VI) oxide with gaseous hydrogen to form solid tungsten and liquid water?
Answer:
2
Explanation:
WO2(s) + 2H2(g) -> W(s) + 2H2O(l)
A student is heating a crystal of alum to
determine the hydrate formula. If she removes
it from the heat before all the water has been
removed, what will happen to the calculated
hydrate formula?
A. It will not be affected by the error.
B. The mole ratio will indicate less water than was
actually present.
C. The mole ratio Will indicate less alum than was
actually present.
Identify the Lewis acid in this balanced equation: SnCl4 + 2Cl− → SnCl62−
Answer:
The answer is SnCI4.
Explanation:
Answer:
it is a
cause it is and cause i'm right
Name the following alkene:
CH3C = CH2
1
CH3
A. 2-methyl-1-propene
B. 2-methyl-2-propene
C. 1-propyl-2-methene
D. 2-methyl-1-propane
Pls help
The name of the given alkene is 2-methyl-1-propene. The correct option is A.
What are alkenes?
Alkenes are inorganic compounds. They are the series of hydrocarbons, that are formed by carbon-carbon double bonds. To find out alkenes, you have to see that the number of hydrogen atoms is always double the number of carbons.
Propene is an unsaturated compound, which is the second-simplest compound, and it contains a single double bond, and it is a colorless gas and has a texture of petroleum jelly.
CH₃C = CH₂
I
CH₃
Here, the three CH₃ are shown in the diagram, so it will be the methyl because it contains 3 CH₂, and now see the propene means one double bond and four carbon atoms. So it will be the 2-methyl-1-propene.
Thus, the correct option is A. 2-methyl-1-propene.
To learn more about alkenes, refer to the link:
https://brainly.com/question/13910028
#SPJ2
Electricity is possible because atoms release and absorb which sub-atomic particle?
Answer:
Electrons
Electric charge is carried by subatomic particles such as electrons and protons, which can be created and destroyed. For example, when particles are destroyed, equal numbers of positive and negative charges are destroyed, keeping the net amount of charge unchanged.
Two students come up with an idea they think will save time: We just used the fast titrations. You can stop the video when the solution turns pink. We know that when the solution turns pink, the titration is complete, so we just read the volume from the burette as soon as it turns pink. This is faster than going through all the shorter videos and works just as well. Is this method just as accurate as using the slow titrations
Answer:
Yes.
Explanation:
Yes, this method is accurate just as the slow titration because in both type of titrations we want to measure the point at which the indicator change the colour of the solution. Both fast and slow titrations are the same in their function i.e. both tell us the point or the amount at which the indicator change the colour of the solution so we can conclude from this discussion that fast titration gives the same result just as the slow titration.
#7 which of the following decreases the rate of solubility of solid molecules in a solution?
Answer:
7. Option D
Explanation:
Solubility increases with the increase in temperature of the solution. It is so because the increase in temperature leads to increase in kinetic energy which then breaks the solute particles held together by intermolecular attractions.
Hence, option D is correct
Help me! Who ever gets to answer and has the best answer gets brainliest
Answer:
Decay-the breakdown of dead plants..
Earth- thermal energy comes from deep inside...
Fires- these consume feul...
Explanation:
Answer:
Fires - These consume fuel and covert chemical energy stored in that fuel into thermal, light and sound energy
Decay - The breakdown of dead plants and animals produces thermal energy
Earth - Thermal energy comes from deep inside and is called geothermal energy
Explanation:
Fires, when you burn wood, you convert chemical energy from the wood into thermal (warmth from the fire), light (glow from the fire), sound (crackling sound of wood burning)
Decay - I can't explain that one to you but there are power plants that use decomposition to produce energy
Earth - Beneath the crust there is the mantle, which consists of molten rock which produces a lot of thermal energy. This can be seen in geysers, where the molten rock heats water and hot water can burst out of the surface. Applies to hot springs too
According the article , why is it difficult for many cities in the U.S today to recycle
Why recycling isn't working in the U.S.
Many recyclables become contaminated when items are placed in the wrong bin, or when a dirty food container gets into the recycling bin. Contamination can prevent large batches of material from being recycled. Other materials can't be processed in certain facilities.
A blend or combination of genetic material of the parents.
Question 2
What do variations of inherited traits between parent and offspring arise from?
Answer:
Variations of inherited traits between parent and offspring arise from genetic differences that result from the subset of chromosomes (and therefore genes) inherited.
Explanation:
Classify each statement as a property of ethers, alcohols, or both ethers and alcohols?
1. These compounds form hydrogen bonds between themselves and with other compounds containing an O-H, N-H, or F-H bond, such as water.
2. These compounds are water soluble if they have fewer than four carbon atoms.
3. When comparing ethers and alcohols of similar molecular weights, these compounds have the lower boiling point.
Explanation:
1. Only alcohols forms hydrogen bond between themselves and with other compounds containing an O-H, N-H, or F-H bond, such as water.
2. Alcohols up to 4 carbons are miscible in water because they have hydrogen bonded to oxygen and can form hydrogen bond with water. However, it is not possible for ethers.
3. When comparing ethers and alcohols of similar molecular weights, ethers have lower boiling point than alcohol. This is because of the presence of hydrogen bond in alcohols.
The given statements can be classified as a property of both(ether and alcohol), both(ether and alcohol), and ether, respectively.
The given property of ethers, alcohols, or both ethers and alcohols are classified as:
This statement is a property of both ethers and alcohols. Both ethers and alcohols can form hydrogen bonds due to the presence of oxygen atoms in their molecules, which can interact with other compounds containing O-H, N-H, or F-H bonds, such as water.This statement is a property of both ethers and alcohols. Both ethers and alcohols can be water-soluble if they have fewer than four carbon atoms. The presence of the oxygen atom in ethers and alcohols allows them to form hydrogen bonds with water molecules, increasing their solubility.This statement is a property of ethers. When comparing ethers and alcohols of similar molecular weights, ethers generally have lower boiling points than alcohols. This is because ethers do not have hydrogen atoms directly bonded to the oxygen atom, which reduces the strength of intermolecular hydrogen bonding compared to alcohols. As a result, ethers have weaker intermolecular forces and lower boiling points.Hence, the statements can be classified as shown above.
Learn more about ethers and alcohols here:
https://brainly.com/question/31986508
#SPJ6
NEED HELP ASAP
Imagine that you have a sample of a substance. You cannot physically separate that substance into components. You also cannot chemically separate that substance into components. Which of the following are true about your sample?
The sample is made up of multiple elements. t or f
The sample is made up of one type of atom. t or f
The sample is made up of several types of atoms. t or f
The sample is made up of a single element. t or f
Answer:
The sample is made up of a single element. t or f
Explanation:
Forgot about the t or f! Its true.
Dam bro.....
1. T
2. F
3. T
Answer:
i think its the 3 thired one sorry if rong but good luck
Explanation:
