What fraction of the total energy of a SHO is kinetic when the displacement is one third the amplitude

Answers

Answer 1

Answer:

The fraction of kinetic energy to the total energy is [tex]\frac{K}{T}=\frac{8}{9}[/tex].

Explanation:

displacement is one third of the amplitude.

Let the amplitude is A.

x= A/3

The kinetic energy of the body executing SHM is

[tex]K = 0.5 mw^2(A^2 - x^2)\\\\K = 0.5 m w^2 \left ( A^2 -\frac{A^2}{9} \right )\\\\K = 0.5 mw^2\times \frac{8A^2}{9}......(1)[/tex]

The total energy is

[tex]T =0.5 mw^2A^2 ..... (2)[/tex]

Divide (1) by (2)

[tex]\frac{K}{T}=\frac{8}{9}[/tex]


Related Questions

A magnetic force acting on an electric charge in a uniform magnetic field what happend

Answers

Answer:

hgff

Explanation:

Answer:

The charge moves to equilibrium.

E.e = B.e.V

E is electric field force.

e is the charge.

B is magnetic field force.

V is acceleration voltage.

An object moves in a direction parallel to its length with a velocity that approaches the velocity of light. The length of this object, as measured by a stationary observer:________

a. approaches infinity.
b. approaches zero.
c. increases slightly.
d. does not change.

Answers

Answer:

b. approaches zero.

Explanation:

The phenomenon is known as length contraction.

Length contraction is a result of Einstein's special theory of relativity. This theory states that an observer in an inertial frame of reference will observe a decrease in the length of any moving object placed at another inertial frame of reference.

let the length of the train = L

Let the length observed when the train is in motion = L₀

Apply Einstein's special theory of relativity;

[tex]L_0 = L \times \sqrt{1 - \frac{v^2}{c^2} } \\\\where;\\\\v \ is \ the \ velocity \ of \ the \ train\\\\c \ is \ the \ speed \ of \ light\\\\[/tex]

from the equation above, when v = 0, the length observed is equal to the initial length of the train. (L₀ = L)

As the velocity of the train (v) approaches the speed of light (c), the length of the train observed (L₀) becomes smaller than the initial length of the train (L).  (L₀ < L)

Eventually, when v equals c, we will have a square root of zero (0), and the length observed will become zero.  (L₀ = 0)

Thus, the length of this object, as measured by a stationary observer approaches zero

friction between two flat surfaces can be divided into two categories. what are the two most common kinds of friction?

Answers

Answer:

kinetic and static

Explanation:

hope it helps! ^w^

A wire, 1.0 m long, with a mass of 90 g, is under tension. A transverse wave is propagated on the wire, for which the frequency is 890 Hz, the wavelength is .10m, and the amplitude is 6.5 mm. The tension in the line, in SI units, is closest to

Answers

Answer:

T = 712.9 N

Explanation:

First, we will find the speed of the wave:

v = fλ

where,

v = speed of the wave = ?

f = frequency = 890 Hz

λ = wavelength = 0.1 m

Therefore,

v = (890 Hz)(0.1 m)

v = 89 m/s

Now, we will find the linear mass density of the wire:

[tex]\mu = \frac{m}{L}[/tex]

where,

μ = linear mass density of wie = ?

m = mass of wire = 90 g = 0.09 kg

L = length of wire = 1 m

Therefore,

[tex]\mu = \frac{0.09\ kg}{1\ m}[/tex]

μ = 0.09 kg/m

Now, the tension in wire (T) will be:

T = μv² = (0.09 kg/m)(89 m/s)²

T = 712.9 N

A 3.00-kg ball swings rapidly in a complete vertical circle of radius 2.00 m by a light string that is fixed at one end. The ball moves so fast that the string is always taut and perpendicular to the velocity of the ball. As the ball swings from its lowest point to its highest point Group of answer choices the work done on it by gravity is -118 J and the work done on it by the tension in the string is zero. the work done on it by gravity is -118 J and the work done on it by the tension in the string is 118 J. the work done on it by gravity and the work done on it by the tension in the string are both equal to -118 J. the work done on it by gravity is 118 J and the work done on it by the tension in the string is -118 J. the work done on it by gravity and the work done on it by the tension in the string are both equal to zero.

Answers

Answer:

The ball moves from lowest to highest point:

W = M g h = 3 * 9.8 * 4 = 118 J

This is work done "against" gravity so work done by gravity is -118 J

The tension of the string does no work because the tension does not

move thru any distance   W = T * x = 0 because the length of the string is fixed.

you decide to work part time at a local supermarket. The job pays eight dollars and 60 per hour and you work 20 hours per week. Your employer withhold 10% of your gross pay federal taxes, 7.65% for FICA taxes, and 5% for state taxes

Answers

I guess that we want to find how much money you get each week.

We know that the job pays $8.60 per hour.

We know that you work 20 hours per week.

Then the gross pay (the total money that you earn) in a week is 20 times $8.60, or:

20*$8.60 = $172.

Now we know that your employer witholds:

10% + 7.65% + 5% = 22.65%

Then your employer withholds 22.65% of your gross pay.

if the 100% of your gross pay is $172

Then the 22.65% will be:

(22.65%/100%)*$172 = 0.2265*$172 = $38.96

This means that your employer withholds $38.96 of your weekly gross pay.

Then each week you get:

$172 - $38.96 = $133.04

If you want to learn more, you can read:

https://brainly.com/question/6692050

plz help me with hw A bus of mass 1000 kg moving with a speed of 90km/hr stops after 6 sec by applying brakes then calculate the distance travelled and amount of force applied.​

Answers

Answer:

Mass, M = 1000 kg

Speed, v = 90 km/h = 25 m/s

time, t = 6 sec.

Distance:

[tex]{ \tt{distance = speed \times time }} \\ { \tt{distance = 25 \times 6}} \\ { \tt{distance = 150 \: m}}[/tex]

Force:

[tex]{ \tt{force = mass \times acceleration}} \\ { \bf{but \: for \: acceleration : }} \\ from \: second \: equation \: of \: motion : \\ { \bf{s = ut + \frac{1}{2} {at}^{2} }} \\ \\ { \tt{150 = (0 \times 6) + ( \frac{1}{2} \times a \times {6}^{2} ) }} \\ \\ { \tt{acceleration = 8.33 \: {ms}^{ - 2} }} \\ \\ { \tt{force = 1000 \times 8.33}} \\ { \tt{force = 8333.3 \: newtons}}[/tex]

A falcon is hovering above the ground, then suddenly pulls in its wings and begins to fall toward the ground. Air resistance is not negligible.
Identify the forces on the falcon.
a. Kinetic friction
b. Weight w
c. Static friction
d. Drag D
e. Normal force n
f. Thrust
g. Tension T

Answers

Answer:

Explanation:

When a falcon is hovering, the force of up thrust is balanced by the weight.

When it begins to fall towards the ground, the weight acts downwards, kinetic friction is upwards, drag is upwards, normal force is upwards, thrust is upwards.

A plane flying horizontally at an altitude of 1 mi and a speed of 480 mi/h passes directly over a radar station. Find the rate at which the distance from the plane to the station is increasing when it is 3 mi away from the station.

Answers

Answer:

First remember that the distance between two points (a, b) and (c, d) is given by the equation:

[tex]d = \sqrt{(a - c)^2 + (b - d)^2}[/tex]

Now let's define the position of the radar as:

(0mi, 0mi)

Then we can write the position of the plane as:

(480mi/h*t, 1mi)

where t is time in hours.

Then we can write the distance equation as:

[tex]d(t) = \sqrt{(480\frac{mi}{h}*t - 0mi)^2 + (1mi -0mi)^2 } \\\\d(t) = \sqrt{(480\frac{mi}{h}*t )^2 + (1mi)^2 }[/tex]

Now we want to get:

the rate at which the distance from the plane to the station is increasing when it is 3 mi away from the station.

So first we want to find the value of t such that:

d(3) = 3mi

We will look at the positive value of t, because at this point the plane is increasing its distance to the station.

[tex]3mi = \sqrt{(480\frac{mi}{h}*t )^2 + (1mi)^2 }\\\\(3mi)^2 = (480\frac{mi}{h}*t )^2 + (1mi)^2\\\\9mi^2 - 1mi^2 = (480\frac{mi}{h}*t )^2\\\\8mi^2 = (230,400 mi^2/h^2)*t^2\\\\\\\sqrt{\frac{8mi^2}{230,400 mi^2/h^2} } = t = 0.0059 h[/tex]

The rate of change when the plane is 3 mi away from the station is:

d'(0.0059h)

remember that:

d'(t) = dd(t)/dt

We can write:

d(t) = h( g(t) )

such that:

h(x) = √x

g(t) = (480mi/h*t)^2 + (1mi)^2

then:

d'(t) = h'(g(t))*g'(t)

This is:

[tex]d'(t) = \frac{dd(t)}{dt} = \frac{1}{2}*\frac{2*t*480mi/h}{\sqrt{(480mi/h*t)^2 + (1mi)^2} }[/tex]

The rate of change at t = 0.0059h is then:

[tex]d'(0.0059h) = \frac{1}{2}*\frac{2*0.0059h*(480mi/h)^2}{\sqrt{(480mi/h*0.0059h)^2 + (1mi)^2} } =452.6 mi/h^2[/tex]

A Man has 5o kg mass man in the earth and find his weight​

Answers

Answer:

49 N

Explanation:

Given,

Mass ( m ) = 50 kg

To find : Weight ( W ) = ?

Take the value of acceleration due to gravity as 9.8 m/s^2

Formula : -

W = mg

W = 50 x 9.8

W = 49 N

A baseball pitcher brings his arm forward during a pitch, rotating the forearm about the elbow. If the velocity of the ball in the pitcher's hand is 34.0 m/s and the ball is 0.310 m from the elbow joint, what is the angular velocity (in rad/s) of the forearm

Answers

Answer:

[tex]\omega=109.67\ rad/s[/tex]

Explanation:

Given that,

The speed of the ball, u = 34 m/s

The ball is 0.310 m from the elbow joint.

We need to find the angular velocity (in rad/s) of the forearm.

We know that,

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{34}{0.31}\\\\\omega=109.67\ rad/s[/tex]

So, the required angular velocity of the forearm is 109.67 rad/s.

A current of 1 mA flows through a copper wire. How many electrons will pass a point in each second?

Answers

Answer:

A current of 1ma flows through a copper wire, how many electron will pass a given point in one second? 1 Coulomb = 6.24 x 10^18 electrons (or protons)/1Sec which is also equal to 1 Amp/1 Sec. 1mA is 1/1000th of 1A so only 1/1000th of 6.24 x 10^18 electrons will pass a given point in 1 Sec.

what is the final velocity if you have an initial velocity of 5 m/s with an acceleration of 3 m/s^2 over a 4 second interval

Answers

Answer:

initial velocity (u)=5m/s

final velocity (v)=?

acceleration (a)=3m/s^2

time (t)=4s

now,

acceleration (a)=v-u/t

3=v-5/4

3×4=v-5

12=v-5

12+5=v

17=v

v=17

In the graph below, why does the graph stop increasing after 30 seconds?

A. The hydrogen gas is absorbing heat to undergo a phase change.
B. A catalyst needs to be added to increase the amount of hydrogen produced.
C. No more hydrogen can be produced because all of the reactants have become products at this point.
D. It has reached the maximum amount of product it can make at this temperature. The temperature would need to increase to produce more.

Answers

Answer:

The answer is "Option C".

Explanation:

It's evident from the figure below that after thirty minutes, not no more hydrogen can be created because all of the reactants have converted into products.

hydrogen gas created in cm cubes per period x = 20 seconds, y = 45 centimeters squared, and so on.

A reaction's terminus (the graph's flat line) indicates that no further products are being created during the reaction.

A supertrain with a proper length of 100 m travels at a speed of 0.950c as it passes through a tunnel having a proper length of 50.0 m. As seen by a trackside observer, is the train ever completely within the tunnel? If so, by how much do the train’s ends clear the ends of the tunnel?

Answers

Answer:

19m

Explanation:

we have proper length L = 100m

the speed of the train v = 0.95

the speed of light is given as = 3x10⁸

length of the tunnel is given as = 50 meters

we can solve for the lenght contraction as

LX√1-v²/c²

= 100 * √1-(0.95*3x10⁸)²/(3x10⁸ )

= 31.22 metres

the train would be well seen at

50 - 31.22

= 18.78

= this is approximately 19 metres

we conclude tht the trains ends clears the ends of the tunnel by 19 meters.

thank you!

Use the following information to answer the next question.
Environmental Concerns
1. release of greenhouse gases
2. release of gases that cause acid rain
3. release of excess heat
4. depletion of solar energy
5. depletion of geothermal energy
6. flooding of land
Which of the above environmental concerns are associated with the production of electricity?
Select one:
O A. 2, 3, and 4
O B. 1, 2, 3, and 6
O C. 1, 2, 3, 5 and 6
O D. 1, 3, and 5

Answers

Answer:

1.Emitted primarily through the burning of fossil fuels (oil, natural gas, and coal), solid waste, and trees and wood products. Changes in land use also play a role. Deforestation and soil degradation add carbon dioxide to the atmosphere, while forest regrowth takes it out of the atmosphere.

2.Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

3.Untreated, heat exhaustion can lead to heatstroke, a life-threatening condition that occurs when your core body temperature reaches 104 F (40 C) or higher. Heatstroke requires immediate medical attention to prevent permanent damage to your brain and other vital organs that can result in death.

4.The loss of solar energy in passing through the atmospheric layers is called the atmospheric deflection. ... The longer the path traversed, the greater the amount of radiant energy depleted. Various processes whereby heat energy is lost through the atmosphere are known as scattering, diffusion, absorption, and reflection.

5.Geothermal energy is renewable because the Earth has retained a huge amount of the heat energy that was generated during formation of the planet. In addition, heat is continuously produced by decay of radioactive elements within the Earth. The amount of heat within the Earth, and the amount that is lost though natural processes (e.g. volcanic activity, conduction/radiation to the atmosphere), are much, much more than the amount of heat lost through geothermal energy production. At any one geothermal field, however, the temperature of the geothermal reservoir or the fluid levels/fluid pressure in the reservoir may decrease over time as fluids are produced and energy is extracted. Produced fluids can be re-injected to maintain pressures, although this may further cool down the reservoir if care is not taken. Over time, it is commonly necessary to drill additional wells in order to maintain energy production as temperatures and/or reservoir fluid pressures decline.

6.Floods, Floodplains, and Flood-Prone Areas. ... Flooding is a result of heavy or continuous rainfall exceeding the absorptive capacity of soil and the flow capacity of rivers, streams, and coastal areas. This causes a watercourse to overflow its banks onto adjacent lands.

The environmental concerns associated with the production of electricity are the release of greenhouse gases, the release of gases that cause acid rain, the release of excess heat, the flooding of land, and the depletion of geothermal energy so, option C is correct.

What is electricity?

The presence or movement of charged particles is electricity. The movement of electrons through a circuit is known as an electric current. The accumulation of electrons on an insulator causes static electricity.

Mostly released when solid trash, trees, and wood products are burned, along with fossil fuels (coal, gas, and oil).

Land use changes also have an impact. Carbon dioxide is released into the atmosphere by deforestation and soil erosion, while it is removed from it by forest regeneration.

To know more about electricity:

https://brainly.com/question/29812640

#SPJ2

A ball thrown horizontally from a point 24 m above the ground, strikes the ground after traveling horizontally a distance of 18 m. With what speed was it thrown, assuming negligible air resistance

Answers

First of all we get the time of flight from the vertical component:
s
=
1
2
g
t
2

t
=

2
s
g

t
=

2
×
24
9.8

t
=
2.21
s

The horizontal component of velocity is constant so:
v
=
s
t
=
18
2.21
=
8.14
m/s

The velocity in the horizontal direction will not change. Then the horizontal speed will be 8.133 meters per second.

What is the projectile motion?

An item or particle that is propelled in a gravitational influence, such as from the crust of the Ground, and moves along a curved route while solely being affected by gravity is said to be in projectile motion.

A ball thrown horizontally from a point 24 m above the ground, strikes the ground after traveling horizontally a distance of 18 m.

The initial velocity is zero. Then the time taken to reach the ground is given as,

h = ut + 1/2at²

- 24 = 0×t + 1/2 (-9.8)t²

24 = 4.9t²

t² = 4.8979

t = 2.213 seconds

Then the horizontal speed is given as,

v = 18 / 2.213

v = 8.133 meters per second

The velocity in the horizontal direction will not change. Then the horizontal speed will be 8.133 meters per second.

Learn more about projectile motion:

https://brainly.com/question/29761109

#SPJ6

A free undamped spring/mass system oscillates with a period of 4 seconds. When 10 pounds are removed from the spring, the system then has a period of 2 seconds. What was the weight of the original mass on the spring? (Round your answer to one decimal place.)

Answers

Answer:

13.3 pounds.

Explanation:

For a spring of constant K, with an attached object of mass M, the period can be written as:

T = 2*π*√(M/K)

Where π = 3.14

First, we know that the period is 4 seconds, then we have:

4s = (2*π)*√(M/K)

We know that if the mass is reduced by 10lb, the period becomes 2s.

Then the new mass of the object will be: (M - 10lb)

Then the period equation becomes:

2s = (2*π)*√((M-10lb)/K)

So we have two equations:

4s = (2*π)*√(M/K)

2s = (2*π)*√((M-10lb)/K)

We want to solve this for M.

First, we need to isolate K in one of the equations.

Let's isolate K in the first one:

4s = (2*π)*√(M/K)

(4s/2*π) = √(M/K)

(2s/π)^2 = M/K

K = M/(2s/π)^2 = M*(π/2s)^2

Now we can replace it in the other equation.

2s = (2*π)*√((M-10lb)/K)

First, let's simplify the equation:

2s/(2*π) = √((M-10lb)/K)

1s/π =  √((M-10lb)/K)

(1s/π)^2 =  ((M-10lb)/K

K*(1s/π)^2 = M - 10lb

Now we can use the equation: K =  M*(π/2s)^2

then we get:

K*(1s/π)^2 = M - 10lb

(M*(π/2s)^2)*(1s/π)^2 = M - 10lb

M/4 = M - 10lb

10lb = M - M/4

10lb = (3/4)*M

10lb*(4/3) = M

13.3 lb = M

What bet force is required to stop a 2250 kg car if the decelerates at a rate of -4.3 m/s^2 please answer fast

Answers

Answer:

Force = Mass × Acceleration

[tex]{ \tt{force = 2250 \times 4.3}} \\ = { \tt{9675 \: newtons}}[/tex]

You are cooking breakfast for yourself and a friend using a 1,140-W waffle iron and a 510-W coffeepot. Usually, you operate these appliances from a 110-V outlet for 0.500 h each day. (a) At 12 cents per kWh, how much do you spend to cook breakfast during a 30.0 day period

Answers

Answer:

The cost is 297 cents.

Explanation:

Power of iron, P = 1140 W

Power of coffee pot, P' = 510 W

Voltage, V = 110 V

Time, t = 0.5 h each day

Cost = 12 cents per kWh

(a) Total energy

E = P x t + P' x t

E = 1140 x 0.5 x 60 x 60 + 510 x 0.5 x 60 x 60

E = 2052000 + 918000 = 2970000 J

1 kWh = 3.6 x 10^6 J

E = 0.825 kWh

For 30 days

E' = 0.825 x 30 = 24.75 kWh

So, the cost is

= 12 x 24.75 = 297 cents

The displacement x of a particle varies with time t as x = 4t 2 -15t + 25. Find the position,
velocity and acceleration of the particle at t = 0. When will the velocity of the particle becomes
zero? Can we call the motion of the particle as one with uniform acceleration?

Answers

Answer:

x = 4 t^2 - 15 t + 25        displacement of particle

dx / dt = 8 t - 15        velocity of particle

d^2x / dt^2 = 8       acceleration of particle

If 8 t -15 = o     then t = 8 / 15

Since acceleration is a constant 8 then motion has uniform acceleratkon

True or False: The forces applied by our muscles on our bones are usually several times larger than the forces we exert on the outside world with our limbs.

Answers

Answer:

True

Explanation:

This is because of the point where the forces are applied by our muscles and

the angle they have about the bones. Take for example the  diagram I uploaded.

If we do a free body diagram and a sum of torques, we would get that:

[tex]F_{muscle}sin \theta r1 - mg r2 = 0[/tex]

In this case, mg is the same in magnitude as the force made by the hand to hold the ball, so:

[tex]F_{muscle}sin \theta r_{1} - F_{hand} r_{2} = 0[/tex]

If we solve the equation for the force of the muscle we would get that:

[tex]F_{muscle}=\frac{F_{hand}r_{2}}{r_{1}sin \theta}[/tex]

Since r2 is greater than r1 and the sin function can only return values that are less than 1, this means that the force of the muscle is much greater than the force used by the hand to hold the weight.

Let's use some standard values to prove this, let's say that r1=10cm, r2=35cm and theta=60 degrees. When inputing the values into the equation we get:

[tex]F_{muscle}=\frac{F_{hand}(35cm)}{(10cm)sin (60^{o})}[/tex]

which yields:

[tex]F_{muscle}=4.04 F_{hand}[/tex]

so in this example, the force made by the muscle is 4 times as big as the force exerted by the hand.

Uranus and Neptune may have a compressed liquid water ocean beneath their atmospheres. What three pieces of evidence support this conclusion?

Answers

Answer:

Distance from sun, orbit and rotation. Presence of interior oceans, and elements that forms compressed water.

Explanation:

Both the planets are Jovian planets and have layers formed by ice such as that of Uranus does not have any surface. Such as the planet is only rotating fluids.  While 80% of the mass of Neptune is made up of fluids or icy water and also consists of ammonia and methane.

A fan that is rotating at 960 rev/s is turned off. It makes 1500 revolutions before it comes to a stop. a) What was its angular acceleration(assuming it was constant)

Answers

Answer:

α = 1930.2 rad/s²

Explanation:

The angular acceleration can be found by using the third equation of motion:

[tex]2\alpha \theta=\omega_f^2-\omega_i^2[/tex]

where,

α = angular acceleration = ?

θ = angular displacement = (1500 rev)(2π rad/1 rev) = 9424.78 rad

ωf = final angular speed = 0 rad/s

ωi = initial angular speed = (960 rev/s)(2π rad/1 rev) = 6031.87 rad/s

Therefore,

[tex]2\alpha(9424.78\ rad) = (0\ rad/s)^2-(6031.87\ rad/s)^2\\\\\alpha = -\frac{(6031.87\ rad/s)^2}{(2)(9424.78\ rad)}[/tex]

α = - 1930.2 rad/s²

negative sign shows deceleration

A spinning wheel having a mass of 20 kg and a diameter of 0.5 m is positioned to rotate about its vertical axis with a constant angular acceleration, a of 6 rad/s If the initial angular velocity is 1.5 rad/s, determine The maximum angular velocity and linear velocity of the wheel after 1 complete revolution.

Answers

Answer:

ωf = 8.8 rad/s

v = 2.2 m/s

Explanation:

We will use the third equation of motion to find the maximum angular velocity of the wheel:

[tex]2\alpha \theta = \omega_f^2 -\omega_I^2[/tex]

where,

α = angular acceleration = 6 rad/s²

θ = angular displacemnt = 1 rev = 2π rad

ωf = max. final angular velocity = ?

ωi = initial angular velocity = 1.5 rad/s

Therefore,

[tex]2(6\ rad/s^2)(2\pi\ rad)=\omega_f^2-(1.5\ rad/s)^2\\\omega_f^2=75.4\ rad/s^2+2.25\ rad/s^2\\\omega_f = \sqrt{77.65\ rad/s^2}[/tex]

ωf = 8.8 rad/s

Now, for linear velocity:

v = rω = (0.25 m)(8.8 rad/s)

v = 2.2 m/s

What is the approximate radius of an equipotential spherical surface of 30 V about a point charge of +15 nC if the potential at an infinite distance from the surface is zero?

Answers

Answer:

V = k Q / R       potential at distance R for a charge Q

R = k Q / V

R = 9 * 10E9 * 15 * 10E-9 / 30 = 9 * 15 / 30 = 4.5 m

Note: Our equation says that if R if infinite then V must be zero.

the current through a wire is measured as the potential difference is varied what is the wire resistance

Answers

Answer:

Resistance, R = 0.02 Ohms

Explanation:

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

V = IR

Where;

V is the voltage or potential difference.

I is the current.

R is the resistance.

From the attachment, we would pick the following values on the graph of current against voltage;

Voltage, V = 0.5 V

Current = 25 A

To find resistance;

R = V/I

R = 0.5/2.5

Resistance, R = 0.02 Ohms

Note:

Resistance (R) is the inverse of slope i.e change in current with respect to change in voltage.

A boy of mass 50 kg on a motor bike is moveny coith 20m/see what is hio k.E​

Answers

Kinetic energy=a half mv squared
Mass=50kg
Velocity=20m/s
1/2 multiply 50 multiply 20 squared
1/2 multiply 50 multiply 400
1/2 multiply 20000
1 multiply 20000 divide 2
20000 divide 2=1000

Kinetic energy=1000J

HELP NEEDED FAST (last cram sessions before finals)
BRAINLIEST!

Three resistors are connected in series across a 75-V potential difference. R, is 170 and R2 is 190. The potential difference across R3 is 21 V. Find the current in the circuit.

Answers

Explanation:

The sum of the voltages of the components connected in a series circuit is equal to the voltage across the battery.

[tex]V_T = V_1 + V_2 +V_3[/tex]

From Ohm's law ([tex]V=IR[/tex]) and in a series circuit, the amount of current flowing through the components is the same for all. So we can write [tex]V_T[/tex] as

[tex]V_T= 75\:\text{V} = I(170)+I(190) + 21\:\text{V}[/tex]

[tex]I(170+190)=54\:\text{V}[/tex]

[tex]I= \dfrac{54\:\text{V}}{360\:\text{ohms}}=0.15\:\text{A}[/tex]

B.F.Skinner emphesized the importance of-----?

Answers

Answer:

BFSkinner enfatizó la importancia de   creía en la importancia de desarrollar la psicología experimental y dejar atrás el psicoanálisis y las teorías acerca de la mente basadas en el simple sentido común.

Explanation:

He gave emphasis on the importance of reinforcement in language acquisition. He gave one of the earliest scientific explanations of language acquisition in 1957. He accounted for language development using the influence of the environment.
Other Questions
Bonita Industries has several outdated computers that cost a total of $18400 and could be sold as scrap for $6400. They could be updated for an additional $3100 and sold. If Bonita updates the computers and sells them, net income will increase by $9000. At what price were the updated versions sold?a. 13,400b. 6600c. 6800d. 8000 The graph showing here is the graph of which of the following rational functions? the hydrometer with the density of liquid to be 800 kg metre per square is the volume of the submerged part of the hydrometer is 5 into 10 to the power minus 5 calculate the mass of the hydrometer In a survey of 938 U.S. adults, 235 say the phrase "you know" is the most annoying conversational phrase. Let p be the proportion of the population who respond yes. Use the given information to Construct a 90% confidence interval for p. Write a sentence which describes a cat and a dog MacKenzie is studying how welfare policies affect working families. She has paid several visits to families who have agreed to participate in her study and has interviewed them. She has also asked them to fill out a questionnaire about the issues in their daily lives, such as household budget and martial harmony. With this info, she is trying to link the effects of welfare policies to these family issues. The study conducted by MacKenzie is part of _________. - sapno ke se din Reliable sources generally avoid information. One disadvantage of online sources is that they are more likely to . One advantage of online sources is that they are more likely to than offline sources. Which points are also part of this set of equivalent ratios? Select all that apply. a. (3, 2)b. (4, 2)c. (4, 8)d. (8, 4)e. (12, 6) The population of a city increased from 23,400 to 27,800 between 2008 and 2012. Find the change of population per year if we assume the change was constant from 2008 to 2012. The founder effect occurs when Multiple Choice large groups of individuals leave their home population and establish new settlements, mating only among themselves. small groups of individuals leave their home population and establish new settlements, mating only among themselves. many members of a population die, resulting in a great loss of genetic diversity. many members of a population reproduce causing too much genetic diversity within the population. small groups of individuals leave their home population and join established settlements, and mating with natives. The temperature of a body falls from 30C to 20C in 5 minutes. The airtemperature is 13C. Find the temperature after a further 5 minutes. Pls answer all questions HELP! How is the mass number of an atom calculated?A - total number of electronsB - total number of protonsC - protons plus neutronsD - electrons plus neutrons Evaluate the expression when a=3.a^2 - 6a -5 A plane flies from London to Dubai and to Colombo. it leaves London at 01:50 and the total journey takes 13 hours and 45 minutes. The local time in Colombo is 7 hours ahead of London. Find the arrival time in Colombo If you were given the power to control the United States government and policy what changes would you make regarding the environment and how would you fund these? You can consider your response to the question and/or include other issues. help don't work this is easyokay tomorrow I have a assignment and is is based on which one better country side or urban (city) and I am team urban (city) so pls share your idea pls it's mean a lot to me I will mark brainist Simplify: 4(b+6)2b(14b The first step of electrophilic aromatic substitution involves the formation of the arenium ion intermediate.a. Trueb. Fasle