What happens when two objects when they are brought closer together The mass of both objects decrease The mass of both objects increase The gravitational force between them decreases The gravitational force between them increases

Hey there!:

Mass = 0.6 g

Density = 0.0012 g/mL

Volume = ??

Therefore :

Density = mass / Volume

0.0012 = 0.6 / V

V = 0.6 / 0.012

V = 500 mL

Hope this helps!

[tex]1.44\times 10^{-2}[/tex]

Explanation:

We need to find the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex].

Here,

The first number is [tex]3.49\times 10^{-3}[/tex]

The second number is [tex]1.1\times 10^{-2}[/tex]

To add these numbers as follows :

[tex]3.49\times 10^{-3}+1.1\times 10^{-2}=0.01449\\\\=1.44\times 10^{-2}[/tex]

So, the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex] is [tex]1.44\times 10^{-2}[/tex]

Answer:

The hydronium ion concentration increases to 100 times the original concentration

Explanation:

The pH of a solution is defined as the negative logarithm of the hydrogen or hydronium ion concentration of that solution. It is given by the expression below:

pH = -log[H₃O⁺] = log[H₃O⁺]⁻¹

Assuming the solution was at neutral with original pH = 7;

The new pH of the solution will be = 7 - 2 = 5

At pH = 7;

log[H₃O⁺]⁻¹ = 7

[H₃O⁺]⁻¹ = 10⁷

[H₃O⁺] = 10⁻⁷

At pH = 5

log[H₃O⁺]⁻¹ = 5

[H₃O⁺]⁻¹ = 10⁵

[H₃O⁺] = 10⁻⁵

10⁻⁵ = 10⁻⁷ * 10²

But 10² = 100

Therefore, the hydronium ion concentration increases to 100 times the original concentration

Answer:

B

Explanation:

On Edge

Answer:

occur if two of the ions form an insoluble ionic compound, which precipitates out of solution

Explanation:

When two ionic compounds are dissolved in water, a double replacement reaction takes place if two of the ions form an insoluble ionic compound, which precipitates out of solution. In double displacement reaction ions switch partners. And hence, produce an insoluble precipitate.

Answer:

[tex]\large \boxed{\text{183 g}}[/tex]  

Explanation:

[tex]\begin{array}{rcl}\text{Density} & = & \dfrac{\text{Mass}}{\text{Volume}}\\\\\rho & = &\dfrac{m}{V}\\\\1.83 \text{ g$\cdot$ cm}^{-3} & = & \dfrac{m}{\text{100 cm}^{3}}\\\\m & = & \text{183 g}\\\end{array}\\\text{There are $\large \boxed{\textbf{183 g}}$ of sulfuric acid.}[/tex]

Answer:

The valency of calcium is +2

Explanation:

Calcium is in group two. The members of group two are divalent metals that loose two electrons to form M^2+.

Since they form M^2+, they form ionic bonds with two uninegative ions. Chlorine is in group 17. This implies that its valency is -1 and it accepts one electron when it participates in an ionic bond.

Hence it will take two chlorine atoms to receive two electrons from one calcium atom in an ionic bond making the ratio of calcium to chlorine in the compound 2:1.

Answer:

Hey there!

A scientist would try to determine the cause of the food poisoning, and see if the people who got poisoned had anything in common, for example: they ate at the same restaurant, they are all people of a certain age, etc.

Let me know if this helps :)

Answer: just trust me its c

Explanation: i dont cap

Answer:

This is called a chemical reaction. gas may form.heat may be produced and the color may change

Answer:

Alpha decay is a type of radioactive disintegration in which unstable atomic nucleus releases a helium nucleus or alpha particle and transform into a different element. The new element formed will be reduced by four and the atomic number will be reduced by two.

Example of alpha decay is: Uranium 238 transform into Thorium 234 with the emission of an alpha particle.

Hey there !

Mass = 237 g

Volume 237 mL

Therefore:

Density = mass / Volume

D = 237 / 237

D = 1.0 g/mL

Hope this helps!

Answer:

Mg2+

Explanation:

o2- =2,8

mg2+ =2,8

na+ =2,8

f- =2,8

since they are all same it depends on protons.

mg2+ has least protons

Answer:

1.5g/cm³

Explanation:

density=mass÷volume

mass= 1.5kg (change into g) = 1500g

volume of the cube = 10×10×10 = 1000cm³

density= divide 1500g÷1000cm = 1.5g/cm³

YOUR WELCOME!

The density of the cube on Earth that weighs 1.5 kg and has a side length of 10 cm is 1.5g/cm³

"Density is the mass per unit volume. Density is a scalar quantity. It is denoted by d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume."

density = mass / volume

The mass of the cube on earth is 1.5 kg

The side length of the cube is 10 cm.

The mass is given in kg. It is converted into grams.

mass= 1.5kg (change into g) = 1500g

A cube is a three-dimensional square, it has 6 faces, so its volume will be calculated completely.

Volume of the cube = 10×10×10 = 1000cm³

Putting the values in the formula of density

density= divide 1500g /1000cm = 1.5g/cm³

Thus, the density of the cube on Earth is 1.5g/cm³.

To learn more about density, refer to the link:

https://brainly.com/question/13291386

#SPJ2

Answer:

potential energy (gravitational)

Explanation:

Potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height. If we think of the ground as the zero height, the height of the object is coming down from a positive height.  Wherever it is relative to the zero height, it is stored at that height, meaning that it is potential energy at that particular height.  When it moves to the ground, it becomes kinetic, by gravitational means.

Answer:

Potential

Explanation:

Explanation:

{c}^C . {d}^D / {a}^A . {b}^B

Explanation:

Answer:

B)−6,942 J /mol

Explanation:

At constant temperature and pressure, you cand define the change in Gibbs free energy, ΔG, as:

ΔG = ΔH - TΔS

Where ΔH is enthalpy, T absolute temperature and ΔS change in entropy.

Replacing (25°C = 273 + 25 = 298K; 25.45kJ/mol = 25450J/mol):

ΔG = ΔH - TΔS

ΔG = 25450J/mol - 298K×108.7J/molK

ΔG = -6942.6J/mol

Right solution is:

Answer:

6.79 atm

Explanation:

Applying Dalton's law of partial pressure:

[tex]P_{total} = P_{helium} + P_{oxygen}[/tex], where [tex]P_{total}[/tex] = total partial pressure of all the component gases in the mixture, [tex]P_{helium}[/tex] = partial pressure of helium gas, and [tex]P_{oxygen}[/tex] = partial pressure of oxygen gas.

From the illustration, [tex]P_{total}[/tex] = 7.00 atm and [tex]P_{oxygen}[/tex] = 0.21 atm. Hence, the partial pressure due to helium is calculated such that:

[tex]P_{helium}[/tex] = [tex]P_{total} - P_{oxygen}[/tex]

           = 7.00 - 0.21

              = 6.79 atm

Therefore, the partial pressure due to helium in order to maintain the pressure due to oxygen at 0.21 atm would be 6.79 atm.

Answer:

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ is 4.11 × 10⁻³ grams

Explanation:

The number of particles in one mole of a substance id=s given by the Avogadro's number which is approximately 6.023 × 10²³ particles

Therefore, we have;

One mole of Cl₂ gas, which is a compound, contains 6.023 × 10²³ individual molecules of Cl₂

3.491 × 10¹⁹ molecules of Cl₂ is equivalent to (3.491 × 10¹⁹)/(6.023 × 10²³) = 5.796 × 10⁻⁵ moles of Cl₂

The mass of one mole of Cl₂ = 70.906 g/mol

The mass of 5.796 × 10⁻⁵ moles of Cl₂ = 70.906 × 5.796 × 10^(-5) = 4.11 × 10⁻³ grams

Therefore;

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ = 4.11 × 10⁻³ grams.

Answer:

1.0843×10^4

Explanation:

If we are to add 9.7300x10^2 + 9.8700x10^3, we must first make the powers of the both to be be the same so that we can carry out any mathematical manipulation of interest. So we can have;

9.7300x10^2 + 98.700x10^2

When we now add the both we have (9.7300 + 98.700)×10^2.

This now gives us the result, 108.43×10^2 which is correctly written as 1.0843×10^4, according to the rules of writing in scientific notation.

Answer:

An ionic bond is a chemical bonding involving the attraction between oppositely charged ions

Explanation:

On the periodic table, elements from group 1 and 7 are attracted to each other and when they bond, it's called ionic bonding. This is because of their valence electrons and ions.

Answer:

Ionic bonding is a type of chemical bonding that involves the electrostatic attraction between oppositely charged ions, and is the primary interaction occurring in ionic compounds. It is one of the main types of bonding along with covalent bonding.

Answer:

iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2

Explanation:

A + 2 B → A 3B 2

A chemical equation among other things, gives the stoichiometry of the reaction; that is the relationship between reactants and products.

This relationship is basically stated in moles form the coefficients of the reactants and product.

From the reaction above, we can say;

1 mol of A reacts with 2 mol of B to form 1 mol of A3B2

It cannot be grams because the reactants and products all have different molar masses.

The correct interpretation of the equation of the hypothetical chemical reaction is; Choice (iii) 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2.

Definition:

Chemical equations are equations that make use of chemical formulae and symbols to represent chemical reactions. The left-hand side of a chemical equation represents the reactants and the right-hand side represents the products.

Each reacting entity is also assigned its corresponding stoichiometric coefficient.

However, this stoichiometric coefficient is to quantify the no. of moles of the reactants consumed or products formed as the case may be.

Read more:

https://brainly.com/question/12271256

Hey there!:

Density = 30 mg/mL

Mass = 150 mg

Volume = ??

Therefore:

D = m / V

30 = 150 / V

V = 150 / 30

V = 5.0 mL

converts volume into liters :

5.0 mL / 1000 => 0.005 L or 5.0 x 10⁻³ L

Hope this helps!

Answer:

A scientific hypothesis must meet 2 requirements:

Explanation:

A scientific hypothesis must be testable, and;

A scientific hypothesis must be falsifiable.

Answer:

Answer:

Potassium  (K)

Sodium  (Na)    

Calcium  (Ca)

Magnesium (Mg)  

Aluminium  (Al)

Iron  (Fe)  

Lead  (Pb)

Copper  (Cu)  

Silver  (Ag)

Gold  (Au)

Answer:

It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle

Explanation:

It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle. The growth of a plant is due to the availability of the growing and  dividing cells in the meristematic regions of the apical meristems. (stem cells). This site are active site for elongation and differentiation  of the stem tissues. In the apical meristem of the root cells, the cells have the potential to carry out mitosis and cell division repeatedly in order to generate newer cells for extension and development of stems and leaves. With each cell division, one cell remains in the meristem which the other increases in size and differentiate due to different genomic expression to form the meristem regions which eventually becomes the stem structure.

Answer:

It loses kinetic energy.

Explanation:

The definition of heat is molecules moving fast, so it cooling would mean they slow down.

Answer:

B, It loses kinetic energy.

Explanation:

Answer:

The answer that completes the question are in BOLD:

At chemical equilibrium, the amount of PRODUCT AND REACTANT REMAIN CONSTANT because the RATES OF THE FORWARD AND REVERSE REACTIONS ARE EQUAL.

Explanation:

In a reversible chemical reaction, an equilibrium is said to be achieved when the rates of the forward reaction is equal to that of the reverse reaction. A reversible reaction is one in which products are formed from reactants simultaneously with the formation of reactants from products.

The combination of two or more substances called REACTANTS gives rise to another substance called PRODUCT, which can in turn give rise to Reactants again. With time, the rate at which the reactants give rise the products, which is called the FORWARD REACTION will be equal to the rate at which the products give rise to the reactants, which is called REVERSE REACTION. At this point, the chemical reaction is said to be in a STATE OF EQUILIBRIUM.

When the rate at which both reaction occurs becomes equal i.e. at an equilibrium state, the concentration of both the reactants and the products becomes constant i.e. no longer changes. Hence, the amount of the reactants forming the products is the same as the amount of products forming the reactants.

N.B: At chemical equilibrium, the amount of the reactants and products does not necessarily equals zero (0). It simply means that there is no net change in the concentration/amount of both reactants and products.

Answer: Water molecules from the dilute to the concentrated solution

Explanation:

During Osmosis if a solution is separerated by a semipermeable membrane, the solvent (typically water) from the less concentrated solution in terms of solute goes through the semipermeable membrane to the solution with the higher concentration so that the concentrations between the solutions can be balanced.

With the above solutions therefore, water molecules would move from the solution of 0.4M of sugar to the solution with a 0.7M of sugar through the semipermeable membrane.

During osmosis, water molecules move from the dilute to the concentrated solution.

OSMOSIS:

Learn more at: https://brainly.com/question/13655668?referrer=searchResults