what information is needed to balance a chemical formula equation example periodic table or list of chemicals

For the regular tetrahedron, the exact value of $v^2$ is $\frac{1}{144}$.

The regular tetrahedron is a pyramid with four faces, each of which is an equilateral triangle. Let $v$ be the volume of a regular tetrahedron whose sides each have length 1.  A regular tetrahedron is a three-dimensional object with four triangular faces that are congruent. It has four vertices, six edges, and four faces that are equilateral triangles. Let us find the length of height of the tetrahedron using Pythagoras theorem.

$$Height^2=1^2-\left(\frac{1}{2}\right)^2$$

$$\Rightarrow Height^2=1-\frac{1}{4}$$

$$\Rightarrow Height=\frac{\sqrt3}{2}$$

Now, the volume of a tetrahedron is given as,

$$v=\frac{1}{3} \times Area_{base} \times Height$$T

he base of the tetrahedron is an equilateral triangle. We know that the area of an equilateral triangle with side $a$ is,

$$Area=\frac{\sqrt3}{4}a^2$$

For the given tetrahedron, the area of the base is,

$$Area_{base}=\frac{\sqrt3}{4} \times 1^2$$

$$\Rightarrow Area_{base}=\frac{\sqrt3}{4}$$

Now, the volume of the given tetrahedron is,

$$v=\frac{1}{3} \times \frac{\sqrt3}{4} \times \frac{\sqrt3}{2}$$

$$\Rightarrow v=\frac{\sqrt3}{12}$$

Thus, the square of the volume of the given tetrahedron is,

$$v^2=\left(\frac{\sqrt3}{12}\right)^2$$

$$\Rightarrow v^2=\frac{1}{144}$$

Therefore, the exact value of $v^2$ is $\frac{1}{144}$.

Learn more about Tetrahedron:

https://brainly.com/question/14493233

#SPJ11

76 grams of potassium chloride will not dissolve in 100 grams of water at 20°C.

The solubility of potassium chloride in water at 20°C is approximately 34 grams per 100 grams of water.

So, if 100 grams of water can dissolve 34 grams of potassium chloride, then the maximum amount of potassium chloride that can be dissolved in 100 grams of water at 20°C is 34 grams.

Therefore, the amount of potassium chloride that will not dissolve in 100 grams of water at 20°C is:

110 grams - 34 grams = 76 grams

Learn more about solubility here: https://brainly.com/question/23946616

#SPJ1

Increasing the substrate concentration will likely result in the greatest increase in the reaction rate when the substrate concentration is lower than the concentration of the enzyme.

The concentration of the substrate affects the rate of reaction since there is a direct correlation between the number of enzyme-substrate complexes that are formed and the rate of reaction.

When there is more substrate, more enzyme-substrate complexes can form, resulting in an increase in the rate of reaction.

So, it is highly likely that when the substrate concentration is low, increasing the substrate concentration will result in the greatest increase in the reaction rate.

However, when the substrate concentration is already high, the reaction rate may not continue to increase as a result of increasing the substrate concentration.

Learn more about substrate concentration here:

https://brainly.com/question/22428921

#SPJ11

The empirical formula for oxalic acid is C2H2O2.

Oxalic acid, which is present in rhubarb, was found to consist of 26.68% C, 2.24% H, and 71.08% O by mass.

Empirical formula is the simplest formula that represents the composition of a compound in terms of atoms, and it can be obtained by calculating the ratio of atoms of each element in the compound.

The empirical formula of oxalic acid can be found by assuming 100 g of the compound so that the mass percent can be expressed as grams of each element. In the next step, these grams will be converted into moles for each element using their molar mass. The empirical formula will then be the ratio of atoms for each element in the compound.

Let's find out the number of moles of each element in oxalic acid.

C = 26.68 g = 26.68 / 12.01 = 2.22 molH = 2.24 g = 2.24 / 1.01 = 2.22 molO = 71.08 g = 71.08 / 16.00 = 4.44 mol

As the atomic ratios are the same for all three elements, the empirical formula is C2H2O2, and this formula is also called the simplest formula for oxalic acid. The empirical formula for oxalic acid is C2H2O2.

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The resulting solution is slightly basic, with a pH slightly greater than 7. The correct answer is C) NaF.

Salts are ionic compounds formed from the reaction between an acid and a base. They are composed of positively charged ions (cations) and negatively charged ions (anions). Salts are typically solid at room temperature and have high melting and boiling points.

When dissolved in water, salts can dissociate into their component ions, allowing them to conduct electricity. Some common examples of salts include table salt (NaCl), baking soda (NaHCO3), and Epsom salt (MgSO4).

When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The F- ions react with water molecules to form HF and OH- ions. The resulting solution is slightly basic, with a pH slightly greater than 7.

Learn more about salts here https://brainly.com/question/13818836

#SPJ1

The mechanism of action for the citrate synthase 2-part reaction is decarboxylation followed by condensation.

This reaction is the first and the most critical reaction of the Krebs cycle, which is also called the tricarboxylic acid cycle or the citric acid cycle. The Krebs cycle is a series of enzymatic reactions that occur in the mitochondria of eukaryotic cells.

The Krebs cycle is critical in the metabolic process because it oxidizes the pyruvate generated during glycolysis, produces ATP and reduces coenzymes, and ultimately prepares substrates for the electron transport chain. It is a cyclic reaction consisting of eight steps, with citrate synthase catalyzing the first reaction.

The reaction mechanism of citrate synthase is as follows:

The mechanism of action for the citrate synthase 2-part reaction is, therefore, decarboxylation followed by condensation.

To know more about decarboxylation click here:

https://brainly.com/question/29573197

#SPJ11

Answer:

D

Explanation:

I had this question before :)

A chemical alteration has occurred. A new material, cottage cheese, with distinct qualities from the original milk and vinegar is produced when the acid in the vinegar and the proteins in the milk react.

The change described is a chemical change. When vinegar, which is an acid, is combined with milk, a reaction occurs between the acid and the proteins in the milk. This reaction causes the milk to sour and thickens, resulting in the formation of cottage cheese. This change cannot be easily reversed, and the resulting cottage cheese is a new substance with different properties than the original milk and vinegar. This is a chemical change because the molecules in the milk and vinegar are rearranged to form a new substance, which has different chemical and physical properties than the original substances. This process is different from a physical change, such as melting ice, which does not result in the formation of a new substance.

learn more about chemical alteration here:

https://brainly.com/question/29037431

#SPJ4

When the  12. 00 mol Iron react with 6.00 mol O2 then 4.00 mol of Fe3O4 can be produced.

In order to know  how many moles of Fe3O4 can be produced from the reaction of 12.00 mol Fe with 6.00 mol O2, we first need to get balance the chemical equation for the reaction:

4 Fe + 3 O2 -----> 2 Fe3O4

From the balanced equation, we can see that for every 4 moles of Fe that react, we need 3 moles of O2. Therefore, the limiting reactant in this case is O2, since we only have 6.00 mol available, while we need 8.00 mol to react with all 12.00 mol of Fe. This means that Fe will be in excess and we can calculate the amount of Fe3O4 produced based on the amount of O2 that reacts.

To do this, we can use the mole ratio from the balanced equation:

3 mol O2 --------> 2 mol Fe3O4

So, for every 3 moles of oxygen that react, we can produce 2 moles of Fe3O4. Since we have 6.00 mol of O2, we can obtain the moles of Fe3O4 produced as follows:

6.00 mol O2 x (2 mol Fe3O4 / 3 mol O2) = 4.00 mol Fe3O4

Therefore, it can be concluded that 4.00 mol of Fe3O4 can be produced when 12.00 mol Iron reacts with 6.00 mol O2.

Learn more Molarity :

https://brainly.com/question/15948514

#SPJ4

Ernest Rutherford, a New Zealand physicist, conducted the gold foil experiment and discovered that the atom has a positively charged nucleus.

In 1911, he conducted an experiment in which he fired alpha particles at a thin sheet of gold foil. The majority of the particles went straight through the gold foil, but a small percentage of the particles bounced back. He discovered that the bouncing back was caused by a small, positively charged nucleus at the center of the atom. Rutherford's experiment was crucial to our understanding of the structure of the atom. Prior to his experiment, the prevailing model of the atom was that it was a solid, indivisible sphere.

However, Rutherford's experiment showed that the atom was mostly empty space, with a positively charged nucleus at its center. This discovery paved the way for future research into atomic structure and helped to lay the foundation for the development of nuclear physics.

For more questions on Ernest Rutherford

https://brainly.com/question/28809146

#SPJ11

Answer:

a) Tripling the concentration of a reactant increases the rate of a reaction nine times.the order of the reaction with respect to that reactant is 2

b)Increasing the concentration of a reactant by a factor of four increases the rate of a reaction four times.the order of the reaction with respect to that reactant is 1.

Explanation:

a) The order of the reaction with respect to that reactant is 2. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:

rate = k[A]^x[B]^y[C]^z

Where k is the rate constant and x, y, and z are the orders of the reaction with respect to the corresponding reactants. When [A] is tripled, the rate increases nine times, indicating that the rate is proportional to [A]^2. Therefore, the order of the reaction with respect to [A] is 2.

b) The order of the reaction with respect to that reactant is 1. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:

rate = k[A]^x[B]^y[C]^z

When [A] is quadrupled, the rate increases four times, indicating that the rate is proportional to [A]. Therefore, the order of the reaction with respect to [A] is 1.

To know more about concentration of a reactant refer here:https://brainly.com/question/4600091#
#SPJ11

The carbon that is attached to the oxygens in CH₃COOH (acetic acid) is sp2 hybridized. This is because it is attached to three atoms (one oxygen and two hydrogens) and has a trigonal planar geometry.

The molecule with the greatest dipole moment is CH₂Cl₂(dichloromethane) because it has a tetrahedral geometry and the two C-Cl bonds are oriented in opposite directions, creating a net dipole moment. The other molecules (CCl₄, CF₄, and Br₂CCl₂) are all symmetric and have zero dipole moment.

A chemical concept known as hybridization describes the bonding and geometry of molecules. It entails combining atomic orbitals to create hybrid orbitals, which can more accurately capture the bonding in a molecule. The number of hybrid orbitals formed is equal to the number of atomic orbitals combined. Atomic orbitals with similar energy levels are merged to create the hybrid orbitals. An atom's geometry, bond angles, and polarity can all be impacted by hybridization, which can then have an impact on the molecule's reactivity and physical characteristics. Foreseeing the forms and characteristics of molecules as well as explaining their chemical behaviour requires an understanding of atom hybridization.

Learn more about hybridization here:

https://brainly.com/question/30010106

#SPJ4

Answer:

Explanation:

To calculate the standard enthalpy of formation for TICL(I), we need to use the given thermochemical equations and Hess's law. The equation for the formation of TICL(I) is:

C(s) + TiO₂ (s) + 2Cl(g) → TICL(I) + CO(g)

Using the given equations for the formation of CO(g) and TiO2(s), we can manipulate them to get the necessary reactants for the formation of TICL(I):

Ti(s) + O₂(g) → TiO₂(s) (reverse the equation)

C(s) + 1/2O₂(g) → CO(g) (multiply by 2)

Adding these two equations, we get:

Ti(s) + 2C(s) + O₂(g) → TiO₂(s) + 2CO(g)

This equation is the reverse of the equation given for the formation of TICL(I), so we need to flip its sign to get the correct value for the enthalpy change:

TICL(I) → C(s) + TiO₂ (s) + 2Cl(g) + CO(g)

ΔH° = -(-394 kJ/mol + 286 kJ/mol + 0 + (-221 kJ/mol))

ΔH° = -(-329 kJ/mol)

ΔH° = +329 kJ/mol

Therefore, the correct value for the standard enthalpy of formation for TICL(I) is +329 kJ/mol, which is option D.

Answer:91

Explanation:because I am just very smart and this is the answer <3

When you mix baking soda and vinegar, a chemical reaction occurs that produces carbon dioxide gas, water, and a type of salt called sodium acetate.

Before: Before mixing baking soda and vinegar, they are both in their separate states. Baking soda is a white powder, and vinegar is a clear liquid.

During: When you mix the baking soda and vinegar, the baking soda (sodium bicarbonate) reacts with the vinegar (acetic acid) to produce carbon dioxide gas (CO2), water (H2O), and sodium acetate (NaC2H3O2).

After: After the chemical reaction has taken place, you will see bubbles of carbon dioxide gas being released. The solution will also become cloudy as the sodium acetate precipitates out. The resulting mixture may feel warmer due to the exothermic nature of the reaction (meaning it releases heat).

Learn more about baking soda in vinegar:https://brainly.com/question/2427021

#SPJ1

Answer: B (The Rf value would decrease)

Explanation:

The Rf (retention factor) value is a ratio of the distance traveled by the compound to the distance traveled by the solvent front in thin-layer chromatography (TLC). The polarity of the solvent affects the Rf value of a compound.

In general, if a more polar solvent is used in TLC, the Rf value of a compound will decrease, and if a less polar solvent is used, the Rf value will increase.

In this case, using 40% ethyl acetate in hexanes means using a more polar solvent compared to a pure hexanes solvent. As eugenol is a moderately polar compound, the increased polarity of the solvent will likely result in a decrease in the Rf value.

Therefore, the correct answer is b. The Rf value would decrease.

When two protons are fired toward each other in a particle accelerator, with only the electrostatic force acting, then their kinetic energy keeps increasing, acceleration keeps decreasing, kinetic energy keeps decreasing, electric potential energy keeps decreasing.

The electrostatic force is a force that arises between electrically charged objects. It is the force exerted on a charged particle by other charged particles or electromagnetic fields. It is a fundamental force in nature that has an infinite range and can be either attractive or repulsive. The strength of the electrostatic force is proportional to the inverse square of the distance between the charged particles. As two charged particles move closer together, the force between them increases. Therefore, as the two protons move closer together, their kinetic energy and electric potential energy will increase.

According to Coulomb's law, the electrostatic force is inversely proportional to the square of the distance between the two charges. Therefore, as the distance between the two protons decreases, the electrostatic force acting between them will increase. As a result, their acceleration will keep decreasing. At the same time, as the protons move closer together, their kinetic energy will keep increasing while their electric potential energy will keep decreasing.

Learn more about Electrostatic force here:

https://brainly.com/question/9774180

#SPJ11

a) The total pressure of the mixture is 434 torr

b) The mass of each gas is, N₂ = 40.56 g, O₂ = 21.76 g, He = 3.20 g

a) The total pressure of the mixture is calculated by adding all the values of partial pressures of the N₂, O₂, and He

215 torrs of N₂ + 102 torr of O₂ + 117 torr of He

= 434 torr

Thus, the total pressure of the mixture is 434 torr

b) The mass of each gas in the 1.35 L sample of the mixture at 25.0 C can be calculated using the ideal gas law: PV = nRT.

The amount of each gas present is equal to the total moles of gas, n, in the sample.

n = (PV)/(RT)

where P is the partial pressure of the gas in the mixture,

V is the volume of the sample (1.35 L),

R is the ideal gas constant (0.08206 L atm mol⁻¹ K⁻¹), and

T is the temperature in Kelvin (298.15 K).

For N₂: n = (215 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 1.45 moles
For O₂: n = (102 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 0.68 moles
For He: n = (117 torr x 1.35 L)/(0.08206 L atm mol⁻¹ K⁻¹ x 298.15 K) = 0.80 moles

The mass of each gas is equal to the moles multiplied by the molar mass of the gas:

For N₂: 1.45 moles x 28.01 g/mol = 40.56 g
For O₂: 0.68 moles x 32.00 g/mol = 21.76 g
For He: 0.80 moles x 4.00 g/mol = 3.20 g

Thus, the mass of each gas is, N₂ = 40.56 g, O₂ = 21.76 g, He = 3.20 g.

Learn more about partial pressure here:

https://brainly.com/question/14119417

#SPJ11

The idea of punctuated equilibrium asserts that some evolutionary changes may not even involve intermediate forms.

The idea of punctuated equilibrium is a theory in evolutionary biology that proposes that most evolutionary changes occur relatively rapidly, with long periods of stability punctuated by rare instances of rapid evolutionary change.

The theory was first introduced by Niles Eldredge and Stephen Jay Gould in 1972 as a challenge to the traditional Darwinian theory of gradualism, which posits that evolution proceeds slowly and steadily over long periods of time.

According to punctuated equilibrium, some evolutionary changes may not even involve intermediate forms.

There are several examples of punctuated equilibrium in the fossil record, including the Cambrian explosion, which saw the sudden appearance of most major animal phyla in a relatively short period of time, and the rapid diversification of mammals following the extinction of the dinosaurs at the end of the Cretaceous period.

Learn more about Punctuated equilibrium here:

brainly.com/question/4430933

#SPJ11

Answer:

43.1gramms

Explanation:

change the temperatures to kelvin

90--363

40--313

50grams of water are saturated at 90 degree celcius.

then,

50___363

x_____313

then cross multiply

363x=15650

divide both sides by 363

x=43.1gramms

The percent by weight of acetic acid in the vinegar is  3.27% for the given 5.54-g sample of vinegar was neutralized by 30.10 ml of 0.100 m NaOH.

Vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water. A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH. Find the percentage of acetic acid by weight in vinegar. As per the question, vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water.

A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH.

Since NaOH and HC₂H₃O₂ reacts in a 1:1 molar ratio, moles of NaOH used = moles of HC₂H₃O₂ in vinegar

So,0.100 mol/L solution of NaOH = 0.100 mol/L solution of HC₂H₃O₂ in vinegar (as they react in 1:1 ratio).

Also, Volume of NaOH = 30.10 mL = 30.10/1000 = 0.0301L

Thus, Amount of HC₂H₃O₂ in vinegar = 0.100 mol/L × 0.0301 L = 0.00301 mol.

Molar mass of HC₂H₃O₂ = 60.05 g/mol.

Weight of HC₂H₃O₂ in 5.54 g vinegar = 0.00301 mol × 60.05 g/mol = 0.18086 g.

Percentage by weight of acetic acid in the vinegar = 0.18086 / 5.54 × 100 = 3.27%.

Read more about moles here:

https://brainly.com/question/15356425

#SPJ11

Answer:

True. The limiting reagent is the reactant that is completely consumed in a chemical reaction and limits the amount of product that can be formed. The theoretical yield is the maximum amount of product that can be obtained from the limiting reagent, assuming that the reaction goes to completion and no side reactions occur. However, in practice, it is common for side reactions to occur, which can reduce the actual yield of the product. Therefore, while the limiting reagent does control the theoretical yield of a reaction, the actual yield may vary due to the presence of side reactions or other factors that can affect the efficiency of the reaction.

Explanation:

The size of particles has an effect on the rate of dissolving, but temperature is also a significant factor that affects how quickly a solid will dissolve in water. Lowering the temperature slows down the movement.

Temperature is a measure of the average kinetic energy of the particles in a substance or system. In simpler terms, it is a measure of how hot or cold something is. The temperature of a substance or system is commonly measured in degrees Celsius (°C) or degrees Fahrenheit (°F), and it can be influenced by various factors such as heat transfer, pressure, and the presence of other substances. Temperature is an important physical property that affects many aspects of daily life, including weather patterns, cooking, and the functioning of electronic devices. It is also a critical factor in many scientific processes, such as chemical reactions, phase transitions, and the behavior of materials at the atomic and molecular level.

To know more about temperature visit:

https://brainly.com/question/11464844

#SPJ1

To prepare 15 ml of a 0.25 M CaCl₂ solution using deionized water and CaCl₂ salt, the following steps must be followed.

1. Calculate the amount of CaCl₂ salt needed:
Moles = Molarity * Volume (L)

Moles = 0.25M x 0.015L = 0.003750 moles

Mass of CaCl₂ salt = 0.003750 x 110.98 g/mol = 0.41637 g

2. Measure out 0.41637 g of CaCl₂ salt and add it to a clean beaker.

3. Measure out 15 ml of deionized water and add it to the beaker with the CaCl₂ salt.

4. Stir the mixture until the CaCl₂ salt has fully dissolved.

5. The solution is now ready to use.

It is important to remember to use caution when handling and measuring the chemicals and to always wear safety goggles and gloves when working with chemicals.

To know more about CaCl₂ solution, refer here:

https://brainly.com/question/28950352#

#SPJ11

When it comes to titration, a titration curve is the representation of the change in pH with regards to the volume of titrant added.

The point of equivalence is where the stoichiometric amount of titrant reacts completely with the analyte being titrated.

There are several types of titration curves. Below are the classifications of each titration curve:

Strong acid titrated with a strong base. The titration curve for this scenario starts out with a pH of around 3.0, which is the pH of a strong acid. The pH rises until the equivalence point is reached. The pH then drops steeply after the equivalence point.

Strong base titrated with a strong acid. In this titration curve, the pH starts off around  .11, which is the pH of a strong base. The pH drops rapidly until the equivalence point is reached. The pH then rises steeply after the equivalence point.

Weak acid titrated with a strong base. In this titration curve, the pH starts off slightly acidic due to the presence of the weak acid. The pH rises gradually until the equivalence point is reached. The pH then increases steeply after the equivalence point.

Weak base titrated with a strong acid. The pH starts off slightly basic in this titration curve due to the weak base. The pH decreases gradually until the equivalence point is reached. The pH then drops steeply after the equivalence point.

Polyprotic acid titrated with a strong base. In this titration curve, there are more than one equivalence point because the acid is capable of releasing more than one hydrogen ion.

Each equivalence point represents the point at which one mole of H+ is neutralized.

For more information about titration curve refer here

https://brainly.com/question/29590776?

#SPJ11

The principle quantum number (n) of an electron in an atom determines the size of its associated Bohr radius. Specifically, the Bohr radius is inversely proportional to n, meaning the higher the n, the smaller the Bohr radius. Therefore, the difference between Bohr radii will increase with increasing n.

a. Between r1 and r2: The difference between r1 and r2 is that r2 is half the size of r1, as n has increased from 1 to 2.

b. Between r5 and r2: The difference between r5 and r2 is that r5 is a fifth of the size of r2, as n has increased from 2 to 5.

c. Between r5 and r6: The difference between r5 and r6 is that r6 is a sixth of the size of r5, as n has increased from 5 to 6.

d. Between r10 and r11: The difference between r10 and r11 is that r11 is an eleventh of the size of r10, as n has increased from 10 to 11.

a. The difference between r1 and r2 is calculated by substituting n = 1 and n = 2 respectively into the expression for the Bohr radius.

b. The difference between r5 and r2 is calculated by substituting n = 2 and n = 5 respectively into the expression for the Bohr radius.

c. The difference between r5 and r6 is calculated by substituting n = 5 and n = 6 respectively into the expression for the Bohr radius.

d. The difference between r10 and r11 is calculated by substituting n = 10 and n = 11 respectively into the expression for the Bohr radius.

The Bohr radius is given by the expression r = n2ℏ2me4πϵ0 where n is the principal quantum number, ℏ is the reduced Planck constant, me is the mass of the electron, π is the mathematical constant pi, and ϵ0 is the vacuum permittivity.

We can use this expression to calculate the Bohr radius for different values of n, and then calculate the differences between the Bohr radii for different values of n.

For example, the difference between r1 and r2 is given byr2 - r1 = 22ℏ2me4πϵ0 - 12ℏ2me4πϵ0= 4ℏ2me4πϵ0

Similarly, the difference between r5 and r2 is given byr5 - r2 = 52ℏ2me4πϵ0 - 22ℏ2me4πϵ0= 21ℏ2me4πϵ0

The differences between r5 and r6, and between r10 and r11 can be calculated in the same way.

For more information follow the link: https://brainly.com/question/14333424

#SPJ11

Answer:

11.The type of reaction occurring is an elimination reaction.

12. a) The displayed formula and name of the ester formed when ethanoic acid reacts with propan-1-ol in the presence of a suitable catalyst are:

Displayed formula:

H H

│ │

H-C-C-OH + H-C-C-H → H-C-C-OC-C-H + H₂O

│ │

H CH₃

Name: Propan-1-yl ethanoate or propyl acetate

b) A suitable catalyst for this reaction is concentrated sulfuric acid (H₂SO₄).

(a) Methane -the molecular shape is tetrahedral shape.

(b) Ammonia - the molecular shape is trigonal pyramidal.

(c) Sulfur trioxide -  the molecular shape is trigonal planar shape.

(d) Water -  the molecular shape is bent shape.

(e) Carbon dioxide - the molecular shape is a linear shape.

Molecular shape refers to the three-dimensional arrangement of atoms in a molecule. It describes the relative positions of the atoms and the angles between the chemical bonds that connect them.

The shape of a molecule is determined by the arrangement of its electrons and the way in which the atoms share these electrons to form chemical bonds. The shape of a molecule can have a significant impact on its physical and chemical properties, such as its polarity, reactivity, and solubility.

Learn more about molecular shapes here: https://brainly.com/question/11985101

#SPJ1

The percent recovery is the ratio of the actual amount of the desired substance to the original amount present. The total percent recovery can be calculated by using the formula given below.

The units and the correct significant digits should be used in the calculation. We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure. For example, if the product is left on the filter paper while washing, then the actual yield will be less than the theoretical yield.

Calculate the total percent recovery. show calculation with units and correct significant digits. The percent recovery formula is:

Percent recovery = Actual yield ÷ Theoretical yield × 100%

Given, Actual yield = 70 theoretical yield = 80

percentage recovery = Actual yield ÷ Theoretical yield × 100 %

Percentage recovery = 70 ÷ 80 × 100 %

Percentage recovery = 0.875 × 100 %

Percentage recovery = 87.5 %

Therefore, the total percent recovery is 87.5 % with the correct significant digits. Why do we expect that the percent recovery will be less than 100 % for this experiment? We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure.

Learn more about  percent recovery at brainly.com/question/14972210

#SPJ4

Answer:

The meltdown in which of the following structures at a nuclear power plant, such as Chernobyl, would most likely lead to the accidental release of radiation is reactor core. Answer:e

Explanation:

What is the Chernobyl nuclear disaster?

The Chernobyl nuclear disaster was a catastrophic nuclear accident that occurred on April 26, 1986, at the No. 4 reactor in the Chernobyl Nuclear Power Plant, located in the northern Ukrainian Soviet Socialist Republic.

The explosion and subsequent fires resulted in the release of significant amounts of radioactive material into the atmosphere, as well as widespread contamination of the environment.

What was the cause of the Chernobyl nuclear disaster?

During a reactor systems test, an unforeseen combination of factors caused the core of one of Chernobyl's reactors to overheat and explode, releasing radioactive material into the surrounding area. The resulting steam explosion and fires killed two plant workers at the time of the accident and injured hundreds of others.

The explosion also resulted in the deaths of dozens of firefighters and other emergency workers in the aftermath of the disaster.

What was the impact of the Chernobyl nuclear disaster on the environment?

The Chernobyl nuclear disaster resulted in the release of significant quantities of radioactive material, including iodine-131 and cesium-137, which have been linked to a variety of environmental issues. These substances are still present in the environment, and their long-term effects on humans and wildlife are still being investigated.

However, the disaster has had a significant impact on the environment in the years following the accident, including the contamination of water and soil, the displacement of wildlife, and the potential long-term health effects on local populations.

To know more about Chernobyl nuclear disaster refer here:https://brainly.com/question/10116000#
#SPJ11