Answer:
Computers depend mainly on binary because it’s more time efficient for them to so.
Explanation:
It’s easier to identify 0 as “off” and 1 as “on”. As you may know, transistors are the fundamental blocks of microprocessors and ICs. The reasons this is the case is that these transistors form logic gates which can carry out basic logic operations. These logic gates are a huge step into making microprocessors/ICs/etc. And what do these logic gates depend on? They depend on binary.
Whoa whoa, wait a minute. Let’s first take a step back to know a thing or two about logic gates.
These logic gate can be constructed from transistors. They carry basic logic operations. You have one or more inputs “entering” the logic gate ——-> A certain operation is performed on them ——-> you get your output. The input is a voltage. This voltage it can be interpreted as an “on” or “off” according to the gate. Once again these offs and ons are 0s and 1s. For example the Inverter/NOT gate is a gate that simply takes an input and gives its inverse. For example:-
A low voltage/an “off” signal/ a “0” “enters” the NOT gate. ——-> A high voltage/an “on” signal/ a “1” is the result of the operation performed
(In the above example low voltage = “off” signal = 0, high voltage = “on” signal = 1)
As you can see, a 0 enters the NOT gate and a 1 comes out or vice versa. Now, if you were a logic gate, you’d prefer working with just 0s and 1s right? I would. This would be much easier to work with than a lot of different values.
It’s a herculean task to work with these though as a human. And fortunately, programming languages exist for giving the computer instructions to do in a “language” other than its own.
Predict the output... LET A= -20.50 LET B = ABS(A) PRINT B END
Answer:
full and then I would like this
Mary uploaded some images on her website. She chose an image and downloaded it. She found that the image she saw on screen did not seem to have the same DPI as when she had scanned it (she had uploaded a scanned image with 300 DPI). What could be reason with this visual decrease in DPI on the computer screen? (Correct Answer only)
A. Some image resolution was lost while uploading it
B. She downloaded a compressed version of the image.
C. The computer reset the resolution of the image.
D. Her file was probably corrupted while downloading.
E. Computer screens typically display images of only 72 DPI.
The reason for this visual decrease in DPI on the computer screen is some image resolution was lost while uploading it. The correct option is A.
What is resolution?Resolution is the quality of the image that we see in the screen. It is the number of pixels per inch of space. The meaning of PPI is pixel per inch. When a high-resolution picture is seen, it means there are more pixels per inch.
When a picture is downloaded from a site. It does not download in the original pixels because during downloading some pixels are lost due to slow net or the settings of the computer. And a compressed version does not download on its own, and corrupted files do not affect the resolution.
Thus, the correct option is A. Some image resolution was lost while uploading it.
To learn more about resolution, refer to the link:
https://brainly.com/question/15189307
#SPJ5
16. Which of the following is true about function return statements? A) A function can hold multiple return statements, but only one return statement executes in one function call. B) A function can hold only one return statement. C) A function can hold multiple return statements, and multiple return statements can execute in one function call. D) A function can have maximum of two return statements.
Answer:
A) A function can hold multiple return statements, but only one return statement executes in one function call
Explanation:
This is because each function can only return one value, whether it be an integer, String, or other object.
However, you can have a series of if-else statements, or case statements, to return a different value depending on information (within parameters, or variables.
Excellent. So, you can have multiple return statements, but the function will only end up executing one of these return statements and return a single value.
Hope this helps!
The statement "When there are multiple return statements but one return statement should execute the 1 function call" is true.
The following information should be considered:
This can be done as every function has only a return i.e. one value. It can be an integer, string, or any other thing. The function can't hold only 1 return statement.The function can't hold many return statements that execute one function call. The function can't have the utmost 2 return statements.Therefore, we can conclude that option A is correct.
Learn more about the function here: brainly.com/question/12431044
Your help desk has informed you that they received an urgent call from the vice president last night requesting his logon ID and password. You discussed about the call with the VP today and you got to know he never made that call. What type of attack is demonstrated in the given scenario
Answer:
Social Engineering Attack
Explanation:
The exploitation of individuals in order to gain confedential information is a Social Engineering Attack. These attacks typically take advanage of one's emotions or they use inpersonaltion to steal data.
read more here: https://www.webroot.com/us/en/resources/tips-articles/what-is-social-engineering
Lmk if this helps! :)
How can computer be beneficial in agriculture and tourism
The production capacity in farming and animal husbandry has increase due to use of computer in agriculture field . There are less losses due to work are monitored by computer. By using computer in traditional field like agricultural field we can increase the productivity and minimize the error happen.
An online retailer is looking to implement an enterprise platform. Which component of the enterprise platform will help the company capture curate and consumer customer information?
Answer:
Data and Insights
Explanation:
In an enterprise platform, the data and insights are considered as one of the important aspect of any enterprise. It helps in better understanding of the customer so that the enterprise successfully offers best services to the customers.
Data are basically the information that enterprise can gather from the customers and insights are defined by gaining knowledge by analyzing these data so that the company can provide best customer service and it also helps them to capture curate as well as consumer information.
Thus the answer is 'data and insights'.
Which of these is NOT an input device?
O keyboard
O mouse
O blinking light
O microphone
20 points!!!!! Plz answer quickly
Answer:
other words are not clear
full form of ip ........?
why the internet is not policed
Answer:
The Internet allows people to circumvent law by committing criminal acts from areas where their activities are not illegal. Those areas will always exist, and thus new regulations will be just as ineffective as the old ones are ["Net Needs Law Enforcement, Author Says,"]. But Internet traffic is marked with IP addresses, and those addresses can be tied to specific networks with specific locations. Shouldn't it be possible to separate traffic based on the originating network and treat data coming from relatively insecure locations differently than data coming from relatively secure locations? It would be much harder for someone in a rogue nation to hack a network if he had to hack an intermediary network first. And unlike government regulation, which has zero impact in areas where these threats are likely to originate, separating traffic by location might actually work
What is the role of a design tWhat is the role of a design tool in a Robotic Process Automation (RPA) solution?
Answer and Explanation:
Robotic Process Automation(RPA) are software tools that apply artificial intelligence(AI) technology to automate digital routine tasks for business executives. It mimics everyday tasks and automatically executes them for the user.
Design tools in RPA play the role of infusing the best design into RPA software, it works with the popular phrase "design thinking". Robotic process automation software are now in tune with the popular buzz of a user centered approach to design of RPA tools. This ideology focuses on deploying RPA software that appeals to users and are therefore market friendly.
please help me with this this is Computer chapter Advanced HTML of class 8th
Answer:
ok let me try
It stands for
Hypertext Markup Language
Image result for html stands for
HTML (the Hypertext Markup Language) and CSS (Cascading Style Sheets) are two of the core technologies for building Web pages. HTML provides the structure of the page, CSS the (visual and aural) layout, for a variety of devices.
The information included in a résumé should always relate to the job objective; if it isn’t related, it shouldn’t be included.
Answer:
True.
Explanation:
A resume (curriculum vitae) can be defined as a short text-based document that a job applicant use to briefly outline his or her qualifications, abillities and accomplishments, haven completed and obtained an academic certificate. Thus, it is used to briefly outline a person's qualifications, abillities, skills set, and accomplishments, after completing and obtaining an academic certificate such as a bachelor's degree, master's degree, etc.
Generally, all job applicants are required to have a resume (curriculum vitae). This brief and concise document is always requested by human resource managers during the job application process.
Furthermore, the primary way to make a resume persuasive (to convince or inform an action in the minds of the readers - potential employers) is by customizing it to fit each company and position.
Hence, the information included in a résumé should always relate to the job objective; if it isn’t related, it shouldn’t be included.
This ultimately implies that, job applicants are expected to tailor their resume to fit or match the position that is advertised by a company's human resources department.
What is the output?
>>> password = "sdf345"
>>> password isalpha()
>>>
Explanation:
the output password is isalpha()
When a class implements in interface, it must ________ Group of answer choices overload all of the methods listed in the interface provide all of the nondefault methods that are listed in the interface, with the exact signatures and return types specified not have a constructor be an abstract class
Answer:
provide all of the nondefault methods that are listed in the interface, with the exact signatures and return types specified
Explanation:
I am assuming the programming language is Java. Actually, none of the answers are 100% correct, but this one is the only one that is partially correct. The reason is the class implementing an interface can be abstract, and in this case it may not provide ALL nondefault methods.
What is a monitor?
i can ask everyone
Answer:
a screen which displays an image generated by a computer.
Explanation:
A monitor is a piece of computer hardware that displays the video and graphics information generated by a connected computer through the computer's video card. Monitors are similar to TVs but usually display information at a much higher resolution. Also unlike televisions, monitors typically sit atop a desk rather than being mounted on a wall.
write a program in python to make the figure:-
*
**
****
********
****************
********************************
The first and correct answer will be marked as brainliest......
Answer:
Halo mateeeee
look it will be hard to explain the code and steps to you so just refer this video. .
it will help a lott
( *cries* Serena left Ash In pokemon s19 with a k I s s)
https://youtu.be/rUy_Nq9DHTs
write a c program to display the series: 1,8,27,64,125
num_list = [1, 8, 27, 64, 125]
for x in range ( len( num_list) ) :
print (num_list[x])
describe in detail what each step would look like if you ran into a software error.
Answer:
First you have to identify the problem.
Second Gather information.
Third iterate through potential solutions.
Fourth Test your solution.
Explanation:
There are many different ways to handle errors in software but this is the way I do it.
Hope this helps :)
After running into a software error, a user needs to first determine the reason for the error, work towards a solution and then execute the solution discovered.
Software ErrorA software error occurs when an error or unusual behaviour is observed in a piece of software and which can be reproduced after certain actions are performed that are in line with the stated rules of the software developer. In other words, a software error does not occur if the software was not used as directed by the software developer.
You can learn more about software errors here https://brainly.com/question/18497347
#SPJ6
What is malware? a type of virus that spreads through a network connection a type of virus that targets programs and files any program designed to do harm a type of software designed to track activity online
Answer:
any program designed to do harm.
Explanation:
Malware is a program that was created by someone with malicious intent. Malware can target your windows system files and damage windows(or what ever os you use). Malware can corrupt files and even lock you out of your computer.
A logistics company's vulnerability scan identifies the following vulnerabilities on Internet-facing devices in
the DMZ: SQL injection on an infrequently used web server that provides files to vendors SSL/TLS not used for a website that contains promotional information
The scan also shows the following vulnerabilities on internal resources: Microsoft Office Remote Code Execution on test server for a human resources system
TLS downgrade vulnerability on a server in a development network In order of risk, which of the following should be patched FIRST?
A. Microsoft Office Remote Code Execution
B. SQL injection
C. SSL/TLS not used
D. TLS downgrade
Answer:
A. Microsoft Office Remote Code Execution
Explanation:
From the given options, we have;
The web server having a SQL injection is infrequently use
The information on the website having SSL/TLS not used is promotional
The location of the server having a TLS downgrade is on a development network
The location of the Microsoft Office Remote Code Execution is on a human resource system test server
Therefore, given that the test server, is the deployment source of the main server, and that with a Remote Code Execution, RCE, cyber attack, the attacker is able to make commands work on other computers, the RCE attack on the test server is a potential access of an attack on the main servers, and should be patched first.
You make a purchase at a local hardware store, but what you've bought is too big to take home in your car. For a small fee, you arrange to have the hardware store deliver your purchase for you. You pay for your purchase, plus the sales taxes, plus the fee. The taxes are 7.5% and the fee is $20. (i) Write a function t(x) for the total, after taxes, on the purchase amount x. Write another function f(x) for the total, including the delivery fee, on the purchase amount x. (ii) Calculate and interpret (f o t)(x) and (t o f )(x). Which results in a lower cost to you
Answer:
[tex]f(x) = 1.075x[/tex]
[tex]t(x) = x + 20[/tex]
[tex](f\ o\ t)(x) = 1.075x + 21.5[/tex]
[tex](t\ o\ f)(x) = 1.075x + 20[/tex]
Explanation:
Given
[tex]Tax = 7.5\%[/tex]
[tex]Fee = \$20[/tex] -- delivery
Solving (a): The function for total cost, after tax.
This is calculated as:
[tex]f(x) = Tax *(1 + x)[/tex]
Where:
[tex]x \to[/tex] total purchase
So, we have:
[tex]f(x) = x * (1 + 7.5\%)[/tex]
[tex]f(x) = x * (1 + 0.075)[/tex]
[tex]f(x) = x * 1.075[/tex]
[tex]f(x) = 1.075x[/tex]
Solving (b): Include the delivery fee
[tex]t(x) = x + Fee[/tex]
[tex]t(x) = x + 20[/tex]
Solving (c): (f o t)(x) and (t o f)(x)
[tex](f\ o\ t)(x) = f(t(x))[/tex]
We have:
[tex]f(x) = 1.075x[/tex]
So:
[tex]f(t(x)) = 1.075t(x)[/tex]
This gives:
[tex]f(t(x)) = 1.075*(x + 20)[/tex]
Expand
[tex]f(t(x)) = 1.075x + 21.5[/tex]
So:
[tex](f\ o\ t)(x) = 1.075x + 21.5[/tex]
[tex](t\ o\ f)(x) = t(f(x))[/tex]
We have:
[tex]t(x) = x + 20[/tex]
So:
[tex]t(f(x)) = f(x) + 20[/tex]
This gives:
[tex]t(f(x)) = 1.075x + 20[/tex]
We have:
[tex](f\ o\ t)(x) = 1.075x + 21.5[/tex] ---- This represents the function to pay tax on the item and on the delivery
[tex](t\ o\ f)(x) = 1.075x + 20[/tex] --- This represents the function to pay tax on the item only
The x coefficients in both equations are equal.
So, we compare the constants
[tex]20 < 21.5[/tex] means that (t o f)(x) has a lower cost
You are in charge of installing a remote access solution for your network. You decide you need a total of four
remote access servers to service all remote clients. Because remote clients might connect to any of the four
servers, you decide that each remote access server must enforce the exact same policies. You anticipate that
the policies will change frequently.
What should you do? (Select two. Each choice is a required part of the solution.)
A. Configure network policies on the RADIUS server.
B. Make each remote access server a member of the RemoteServers group.
C. Configure the exact same network policies on each server.
D. Configure one of the remote access servers as a RADIUS server, and all other servers as RADIUS clients.
E. Use Group Policy to configure network policies in the default Domain Controllers GPO.
F. Configure each remote access server as a domain controller.
Answer: configure one of the remote access servers as a RADIUS server and all other servers as RADIUS clients
configure network access policies on the RADIUS server
Explanation:
You have been asked to help a small office with a limited budget set up and configure a Windows network. There are only five computers in this office. In addition to the ability to share network resources, security is a top priority.
Which of the following is the BEST course of action in this situation?
A. Install a HomeGroup to provide a single login and simplify security and sharing.
B. Install a WorkGroup to provide a single login and simplify security and sharing.
C. Install a WorkGroup to allow each device to control what is shared and with whom.
D. Install a HomeGroup to allow each computer to control which items are shared and who can access them.
Answer:
I will choose a option tin best
Answer: Install a WorkGroup to allow each device to control what is shared and with whom.
Explanation:
Which of these would you use to connect a mouse to a computer?
O RAM
O ROM
O USB
O TOT
4. Calculate the standard deviation for the following data set: Foundations of Technology Engineering byDesi OITEEA . . Data Set = 4, 14, 6, 2, 7, 12 217 ,
Answer:
[tex]\sigma_x = 5.68[/tex]
Explanation:
Given
[tex]x = 4, 14, 6, 2, 7, 12 2,17[/tex]
Required
The standard deviation
First, calculate the mean
[tex]\bar x =\frac{\sum x}{n}[/tex]
So, we have:
[tex]\bar x = \frac{4+ 14+ 6+ 2+ 7+ 12 +2+17}{8}[/tex]
[tex]\bar x = \frac{64}{8}[/tex]
[tex]\bar x = 8[/tex]
The standard deviation is:
[tex]\sigma_x = \sqrt{\frac{\sum(x - \bar x)^2}{n-1}}[/tex]
So, we have:
[tex]\sigma_x = \sqrt{\frac{(4 - 8)^2+ (14 - 8)^2+ (6 - 8)^2+ (2 - 8)^2+ (7 - 8)^2+ (12 - 8)^2+ (2 - 8)^2+ (17 - 8)^2}{8-1}}[/tex]
[tex]\sigma_x = \sqrt{\frac{226}{7}}[/tex]
[tex]\sigma_x = \sqrt{32.2857}[/tex]
[tex]\sigma_x = 5.68[/tex]
Marcus White has just been promoted to a manager. To give him access to the files that he needs, you make his user account a member of the Managers group, which has access to a special shared folder. Later that afternoon, Marcus tells you that he is still unable to access the files reserved for the Managers group. What should you do
Answer:
log off of his account and log back in
Explanation:
The first thing that Marcus should do would be to log off of his account and log back in. This is so that the new changes to his permissions can take effect. This should solve his problem and grant him access to all the permissions available in the Managers Group. If this does not work, then it is most likely that he is still in the previous group which has the Manager level permissions blocked. In this case he would need to leave the previous group that he is in because the blocking permissions overrides the access allowed from the Managers group.
Helpppppppppppppphuhuh
Answer:
B
Explanation:
You listed this as Computers and Technology where we post coding questions, or hardware related things, but ok.
If there is 7/8 jugs as the starting amount, and they have a 1/2 jug, dividing 0.875 by 0.5 gives the answer of 1.75 or 1 3/4.
what do you mean by automation and diligence with respect to a computer??
Answer:
Delegince computer without any motion resists
If an angry person called and demanded to speak with the executive you support, who is currently unavailable, how would you handle it?
Answer: be nice no matter how mean or rude the person is.
Explanation: because if you’re not you can get in big trouble or fired.
Answer:
remain calm during the conversation
