Answer:
The most important difference between the two is that butter is derived from dairy and is rich in saturated fats, whereas margarine is made from plant oils. ... If the margarine contains partially hydrogenated oils, it will contain trans fat, even if the label claims that it has 0 g.
Explanation:
(⌒_⌒;)
What is the first step in the curved arrow mechanism for the chlorination of benzene in the presence of FeCl3
Answer:
See explanation
Explanation:
The chlorination of benzene occurs in the presence of a Lewis acid. A Lewis acid is a compound that can accept a lone pair of electrons.
The first step in the chlorination of benzene is the formation of the ion Cl^+ which attacks the benzene ring.
This ion is formed when the Cl2 molecule undergoes heterolytic fission assisted by FeCl3 to yield FeCl4^- and Cl^+.
The Cl^+ electrophile now attacks the benzene ring to yield chlorobenzene.
Name two natural sources of esters.
Answer:
"Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries."
Explanation:
Calculate the mass of water produced when 1.57g of butane reacts with excess oxygen
Explanation:
So, first you will want to write the balanced chemical equation for this reaction.
Butane = [tex]C_4H_{10}[/tex]
[tex]2C_4H_{10}+13O_2=>10H_2O+8CO_2[/tex]
^ This ends up being your balanced chemical equation. Now, you can do the math!
[tex]1.57gC_4H_{10}*\frac{1molC_4H_{10}}{58.12gC_4H_{10}}*\frac{10molH_2O}{2molC_4H_{10}}*\frac{18gH_2O}{1molH_2O}[/tex]
After plugging this into a calculator, your final mass of water should be:
2.43gH2O
The volume of a single tantalum atom is 1.20×10-23 cm3. What is the volume of a tantalum atom in microliters?
Answer:
1.20x10⁻²⁰μL
Explanation:
1cm³ is equal to 1milliliter. As we must know, 1milliliter = 1000 microliters, 1000μL. To convert the 1.20x10⁻²³mL we need to use the conversion factor: 1mL = 1000μL.
The volume of tantalum in μL is:
1.20x10⁻²³mL * (1000μL /1L) = 1.20x10⁻²⁰μL
The element antimony has two stable isotopes, antimony-121 with a mass of 120.90 amu and antimony-123 with a mass of 122.90 amu. From the atomic weight of Sb = 121.76 one can conclude that: ________
antimony-123 has the highest percent natural abundance
most antimony atoms have a mass of 121.76 amu
antimony-121 has the highest percent natural abundance
both isotopes have the same percent natural abundance
Answer:
antimony-121 has the highest percent natural abundance
Explanation:
percent natural abundance;
121.76 = 120.90 x + 122.90 (1 - x)
121.76 = 120.90 x + 122.90 - 122.90x
121.76 = -2x + 122.90
121.76 - 122.90 = -2x
x= 121.76 - 122.90/ -2
x= 0.57
Where x and 1 - x refers to the relative abundance of each of the isotopes
Percent natural abundance of antimony-121 = 57 %
Percent natural abundance of antimony-123 = (1 - 0.57) = 43%
Let us remember that isotopy refers to a phenomenon in which atoms of the same element have the same atomic number but different mass numbers. This results from differences in the number of neutrons in atoms of the same element.
We can clearly see that antimony-121 has the highest percent natural abundance.
The phrases or terms describe different fundamental processes of nucleic acids. Classify each phrase or term as relating to replication, transcription, or translation.
a. Single DNA strand used to produce mRNA
b. Requires tRNA
c. Ribosome
d. DNA polymerase
e. Both DNA strands are duplicate
f. Described as semi-conservative
g. Amino acids added to peptide chain
Answer:
I don't know what to do
Explanation:
bye
Answer:
a. Single DNA strand used to produce mRNA ⇒ Transcription
b. Requires tRNA ⇒ Translation
c. Ribosome ⇒ Translation
d. DNA polymerase ⇒ Replication
e. Both DNA strands are duplicate ⇒ Replication
f. Described as semi-conservative ⇒ Replication
g. Amino acids added to peptide chain ⇒ Translation
Explanation:
Replication: the double-strand DNA is separated into two strands. Each strand is used as a template by DNA polymerase to produce the other strand. The leading strand is read by DNA polymerase in a continuous form (3' - 5') and the lagging strand is read in a discontinuous form (5'-3'). In this way, both strands are duplicated. The process is semi-conservative because the DNA molecule produced conserves 1 original strand and the other strand is the new synthesized one. The corresponding options are: d, e, f.
Transcription: is a process in which the genetic code of DNA is copied into a molecule called messenger RNA (mRNA). The double-strand DNA is opened and one strand is read. The enzyme involved is RNA polymerase, which binds the DNA (in a sequence called promoter) and uses the nucleotide code of DNA as a template to produce a molecule of RNA (the mRNA). Therefore, the correct option for this process is a.
Translation: is the process in which the mRNA sequence (copied from a DNA molecule) is translated into an amino acid sequence to produce a protein. This process is carried out within the cell ribosome. The mRNA is read in groups of three nucleotides (a codon) that codifies amino acids. The translation between codon and amino acid is assisted by molecules called transference RNA (tRNA). As each codon is decoded, an amino acid is added and the new polypeptide sequence is synthesized. Therefore, the correct options are: b, c, g.
Ammonium phosphate is an important ingredient in many solid fertilizers. It can be made by reacting aqueous phosphoric acid with liquid ammonia. Calculate the moles of phosphoric acid needed to produce 1.80 mol of ammonium phosphate. Be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
Answer:
Explanation:
The reaction is
H3Po4+3NH3\to→ (NH4)3PO4
Given,7.10g NH3=7.10g/molar mass of NH3
=7.10g/(17.031g/mol)
=0.416mol
From the reaction
3 mol ammonia reacted and produced 1 mole of ammoniam phosphate
So,One mole ammonia reacted and produced 1/ 3 mole ammonium phosphate.
And Also,0.416 mole ammonium reacted and produced (1/3)0.416=0.138 mole ammonium phosphate.
Hence 0.138mole=0.138mole*149.08 g/mole
=20.573gm ammonium phosphate produced.
Hence 20.573g of ammonium phosphate is produced by the reaction of 7.10 g of ammonia.
How many hydrogen atoms are in 3.90 mol of ammonium sulfide?
Answer:
First, the number of ammonium sulfide molecules should be calculated:
N = NA × n,
where NA - the Avogadro number, n - number of moles.
N (ammonium sulfide) = 6.022 × 1023 × 8.5 mol = 51.187 × 1023.
The moelcular formula of ammonium sulfide is (NH4)2S. It means that each molecule contains 8 hydrogen atoms.
As a result, 8.5 mol of (NH4)2S contain:
51.187 × 1023 × 8 = 41 × 1024 hydrogen atoms.
Answer: 41 × 1024 hydrogen atoms
The elemental mass percent composition of succinic acid is 40.68% CC, 5.12% HH, and 54.19% OO. Determine the empirical formula of succinic acid.
Answer:
C2H3O2
Explanation:
Empirical formula is defined as the simplest whole-number ratio of atoms present in a molecule. To solve this question we need to convert the percentage of each atom to moles using molar mass. With the moles of each atom we can find the ratio:
Moles C -Molar mass: 12.01g/mol-
40.68g * (1mol/12.01g) = 3.387 moles C
Moles H-Molar mass:1g/mol-:
5.12g * (1mol/1g) = 5.12 moles H
Moles O -Molar mass: 16g/mol-
54.19g * (1mol/16g) = 3.387 moles O
Ratio of atoms (Dividing in moles of C that are the lower number of moles):
C = 3.387 moles C / 3.387moles C = 1
H = 5.12moles H / 3.387moles C = 1.5
O = 3.387moles O / 3.387 moles C = 1
This ratio twice (To have only whole-numbers):
C = 2
H = 3
O = 2
Empirical formula of succinic acid:
C2H3O2Under certain conditions, the substance mercury(II) oxide can be broken down to form mercury and oxygen. If 32.2 grams of mercury(II) oxide react to form 29.8 grams of mercury, how many grams of oxygen must simultaneously be formed
Explanation:
This is a decomposition reaction. Firstly, you will want to write the chemical equation out and balance it.
[tex]2Hg_2O->4Hg+O_2[/tex] (The -> is supposed to be an arrow, sorry!)
We see that there's only 1mol of Oxygen made in the products, we can do some simple math to solve for the amount of grams of Oxygen produced according to the amount of the reactant (Hg2O).
[tex]32.2gHg_2O*\frac{1molHg_2O}{417.18gHg_2O}*\frac{1molO_2}{2molHg_2O}*\frac{32gO_2}{1molO_2}[/tex]
I want to break this down, just in case:
The 417.18gHg2O is the molecular mass of the molecule (so I doubled Hg and added 16 to it to get this number).
As we can see in the chemical equation, 1mol Hg2O produces 2mol O because Oxygen is a diatomic molecule (so there will always be two of it when it's by itself).
And finally, in 1mol O2 there are 32g of O2.
** When you do math like this, always make sure that all of your units cancel out except for the units you're looking for. For example, here we're looking for the grams of Oxygen, so after everything else cancels out, we should only have grams O2.
So, 1.23gO2 should be your answer.
According to Newton's law of universal gravitation, how do the masses of two
objects relate to the gravitational force between them?
A. As either mass increases, the gravitational force between them
increases.
B. As either mass increases, the gravitational force between them
decreases.
C. Gravitational force increases only when both masses increase.
D. Gravitational force increases only when both masses decrease.
Answer:
As either mass increases, the gravitational force between them
increases.
Explanation:
According to Newton's law of universal gravitation;
F α m1m2/r^2
That is, the force between two masses in a gravitational field is directly proportional to the product of the two masses and inversely proportional to their distance apart.
Hence, as either of the masses increase, the force of gravitation between the two masses increases. Hence the answer.
what mass of phenol must be dissolved in 25.0 g of naphthalene to produce a solution that is 0.22 m in phenol
Answer: A mass of 0.518 g of phenol must be dissolved in 25.0 g of naphthalene to produce a solution that is 0.22 m in phenol.
Explanation:
Given: Mass of naphthalene = 25.0 g
Molality = 0.22 m
This means that 0.22 moles of solute is present per kg of solvent.
As 25.0 g of naphthalene is there that will be 25.0 g per 1000 g (1 kg) is equal to 0.025 kg.
Hence, moles of phenol are calculated as follows.
[tex]Molality = \frac{moles}{mass (in kg)}\\0.22 m = \frac{moles}{0.025 kg}\\moles = 0.0055 mol[/tex]
Also, molar mass of phenol is 94.11 g/mol. This means that 1 mole of phenol contains 94.11 g.
Therefore, mass contained by 0.0055 moles of phenol is as follows.
[tex]0.0055 mol \times 94.11 g/mol \\= 0.518 g[/tex]
Thus, we can conclude that a mass of 0.518 g of phenol must be dissolved in 25.0 g of naphthalene to produce a solution that is 0.22 m in phenol.
Which 2 resonance forms destablize the carbocation intermediate if bezonitrile undergoes chlronation at the ortho or para positions
The question is incomplete, the complete question is shown in the image attached
Answer:
A and B
Explanation:
The electrophilic substitution of arenes yields a cation intermediate. The positive charge of the cation is delocalized over the entire ring.
The -CN group directs incoming electrophiles to the ortho/para position. The resonance structures for the chlorination of benzonitrile are shown in the question.
Recall that -CN is an electron withdrawing group. The resonance forms that destablize the carbocation intermediate are those in which the -CN group is directly attached to the carbon atom bearing the positive charge as in structures A and B.
A sample of 10.6 g of KNO3 was dissolved in 251.0 g of water at 25 oC in a calorimeter. The final temperature of the solution was 21.5 oC. What is the molar heat of solution of KNO3
Answer:
36.55kJ/mol
Explanation:
The heat of solution is the change in heat when the KNO3 dissolves in water:
KNO3(aq) → K+(aq) + NO3-(aq)
As the temperature decreases, the reaction is endothermic and the molar heat of solution is positive.
To solve the molar heat we need to find the moles of KNO3 dissolved and the change in heat as follows:
Moles KNO3 -Molar mass: 101.1032g/mol-
10.6g * (1mol/101.1032g) = 0.1048 moles KNO3
Change in heat:
q = m*S*ΔT
Where q is heat in J,
m is the mass of the solution: 10.6g + 251.0g = 261.6g
S is specififc heat of solution: 4.184J/g°C -Assuming is the same than pure water-
And ΔT is change in temperature: 25°C - 21.5°C = 3.5°C
q = 261.6g*4.184J/g°C*3.5°C
q = 3830.87J
Molar heat of solution:
3830.87J/0.1048 moles KNO3 =
36554J/mol =
36.55kJ/mol
liquid junction potential arise due to?
Answer:
liquid junction potentials
when a cell contains a boundary between two electrolytic solutions of different composition or concentration, a liquid junction potential is developed due to the "diffusion of the various components at characteristic rates in the boundary zone."
#carryonlearning
Name the following aldehyde PLEASE PLEASE HELP
Answer:
Explanation:
Answer is D 2,5-dimethylheptanal
You should accern the lowest possible number close to the parent name
How many molecules of C 2H 5Br will be present if you had 4.52 g of this compound?
Given the amount of camphor (200mg) we are using in this experiment, please determine how many mg of sodium borohydride to use in this reaction. We would like you to use 5.2 molar equivalents of this reagent. This means 5.2 times the mmol of camphor we are using. As an example: for 110.0 mg of camphor,142 mg of NaBH4 would be used (see if you can confirm this result). For complete credit, your work needs to be clearly drawn out!
Answer:
Explanation:
From the given information:
Camphor may be reduced as readily in the presence of sodium borohydride(NaHB4). The resulting compound which is stereoselective requires 1 mole of sodium borohydride (NaHB4) to reduce 1 mole of camphor in this reaction. The reaction is shown below.
Through the reduction process of camphor, the reducing agent can reach the carbonyl face with a one-carbon linkage. The product stereoisomer is known as borneol.
If the molecular weight of camphor = 152.24 g/mol
and it mass = 200 mg
The its no of moles = 200 mg/ 152.24 g/mol
= 1.3137 mmol
Now the amount of the required mmol for NaBH4 to be consumed in the reaction = 5.2 × 1.3137 mmol
= 6.831 mmol
since the molar mass of NaBH4 = 37.83 g/mol
Then, using the same formula:
No of moles = mass/molar mass
mass = No of moles × molar mass
mass = 6.831 mmol × 37.83 g/mol
mass of NaBH4 used = 258.42 mg
15. You are interested in separating 4-methylbenzoic acid from 1,4-dimethoxybenzene using a procedure similar to the extraction procedure we used in lab. You plan to use sodium bicarbonate instead of sodium hydroxide. a) Show the reaction between salicylic acid and sodium bicarbonate. Label the acid, base, conjugate acid, conjugate base. b) Give the pKa values of the acid and conjugate acid. c) Which base will work better, sodium hydroxide or sodium bicarbonate
Solution :
a). The separation of 4-methylbenzoic acid from 1,4-dimethoxybenzene will work but it will result in lower recovery.
In the reaction of acid-base to form a sodium 4 - methoxy benzoate, that is soluble in the water, 4-methoxy benzoic acid reacts with the sodium bicarbonate to give sodium 4-methoxybenzoate as well as carbonic acid.
b). The pKa for the 4-methoxybenzoic acid is [tex]4.46[/tex], and that of carbonic acid is [tex]6.37[/tex]
c). The Keq for the reaction is [tex]10(6.37 - 4.46) = 101.91[/tex]
Therefore, the equilibrium lies to the right and also the reaction favors the products and the separation works.
But the recovery will be low when compared to the extraction with Sodium hydroxide as the strong base will drive the equilibrium further to the right position, thus neutralizing all the acids virtually. And the weak base will partially neutralize the acid.
The table shows the nature of reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants
Metal + lonic compound
Products
Metal + lonic compound
Which of the following is true about the type of chemical reaction?
it is a single replacement reaction, and the anions in the two inic compounds are different.
It is a single replacement reaction, and the cations in the two ionic compounds are different.
It is a double replacement reaction, and the anions in the two ionic compounds are different.
It is a double replacement reaction, and the cations in the two ionic compounds are different.
Answer: It is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.
Explanation:
When one element in a compound is replaced by another element in a chemical reaction then it is called a single replacement reaction.
For example, [tex]K + NaCl \rightarrow KCl + Na[/tex]
Here, potassium metal is replacing the sodium metal in the sodium chloride compound.
As metals become cation by losing an electron in a chemical reaction.
Thus, we can conclude that it is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.
Answer: Its A
Explanation:
a single replacement reactions, and the ANIONS in the two ionic compounds are different
Compound X has the same molecular formula as butane but has a different boiling point and melting point. What can be concluded about Compound X?
A It is a four-carbon alkene or alkyne.
B It is an optical isomer of butane.
C It is a geometric isomer of butane.
D It is a structural isomer of butane.
need this for gradpoint:)
Answer:
d
Explanation:
What is the phase of water at 0.25 atm and 0°C?
Water
(liquid)
Pressure (atm)
0.5-
0.25
Ice
(solid)
Water vapor
(gas)
0
000
Temperature (°C)
O A. Gas
O B. Solid and gas
O C. Solid and liquid
D. Solid
Water is in the solid phase at 0.25 atm and 0°C.
In what phase is water at 25?A pressure of 50 kPa and a temperature of 50 °C correspond to the “water” region—here, water exists only as a liquid. At 25 kPa and 200 °C, water exists only in the gaseous state.
What phase is water in at 0 C?Under standard atmospheric conditions, water exists as a liquid. But if we lower the temperature below 0 degrees Celsius, or 32 degrees Fahrenheit, water changes its phase into a solid called ice.
Learn more about the solid phase here https://brainly.com/question/13396621
#SPJ2
compound of aspartame is a dipeptide that is often used as a sugar substitute which functional groups are present
Answer:
Carboxyl, primary amine, amide, ester, and phenyl.
Explanation:
The functional groups present in the compound of aspartame are carboxyl, primary amine, amide, ester, and phenyl. Aspartame is an artificial non-saccharide sweetener which is 200 times sweeter than sucrose. This aspartame is commonly used as a sugar substitute in many foods and beverages. It has the trade names such as NutraSweet, Equal, and Canderel.
Certain ketones such as fructose can be oxidized by Benedict's reagent under basic conditions to form what type of compound
Answer:
Certain ketones such as fructose can be oxidized by Benedict's reagent under basic conditions to form what type of compound
Explanation:
Benedict's solution is a mixture of copper sulfate, anhydrous sodium carbonate, and sodium citrate.
In presence of mild reducing agents, Cu(II) ion in Benedict's solution becomes the Cu(I) ion.
Fructose has an alpha-hydroxy ketone group.
It undergoes tautomerism and forms alpha-hydroxy aldehyde which gives a positive test with Benedict's reagent.
During this test, aldehydes will be converted into carboxylic acids.
The reaction of fructose with Benedict's reagent is shown below:
g 0.500 L of a solution with a concentration of 0.25 M is needed. To prepare this solution, a stock solution with a concentration of 1.25 M is prepared. What volume of the stock solution is needed to create the desired solution
Answer:
0.1 L
Explanation:
From the question given above, the following data were obtained:
Concentration of stock solution (C₁) = 1.25 M
Volume of diluted solution (V₂) = 0.5 L
Concentration of diluted solution (C₂) = 0.25 M
Volume of stock solution needed solution (V₁) =?
The volume of the stock solution needed can be obtained as follow:
C₁V₁ = C₂V₂
1.25 × V₁ = 0.25 × 0.5
1.25 × V₁ = 0.125
Divide both side by 1.25
V₁ = 0.125 / 1.25
V₁ = 0.1 L
Therefore, the volume of the stock solution needed is 0.1 L
Many chemistry problems result in equations of the form
1.77 X100.298-z)
When this equation is solved, the two values of the unknown are ________ and ________
Answer:
When this equation is solved, the two values of the unknown are 0.0643 and -0.082
Explanation:
Given
[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex] --- the actual equation
Required
The values of x
We have:
[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex]
Cross Multiply
[tex]1.77 * 10^{-2} * (0.298 - x)= x^2[/tex]
Multiply both sides by 100
[tex]1.77 * (0.298 - x)= 100x^2[/tex]
Open bracket
[tex]0.52746 - 1.77x= 100x^2[/tex]
Rewrite as:
[tex]100x^2 + 1.77x - 0.52746 =0[/tex]
Using quadratic formula:
[tex]x = \frac{-b \± \sqrt{b^2 - 4ac}}{2a}[/tex]
Where:
[tex]a = 100; b = 1.77; c = -0.52746[/tex]
So, we have:
[tex]x = \frac{-1.77 \± \sqrt{1.77^2 - 4*100*- 0.52746 }}{2*100}[/tex]
[tex]x = \frac{-1.77 \± \sqrt{214.1169}}{2*100}[/tex]
[tex]x = \frac{-1.77 \± 14.63}{200}[/tex]
Split
[tex]x = \frac{-1.77 + 14.63}{200}\ or\ x = \frac{-1.77 - 14.63}{200}[/tex]
[tex]x = \frac{12.86}{200}\ or\ x = \frac{-16.40}{200}[/tex]
[tex]x = 0.0643\ or\ x = -0.082[/tex]
I don’t want to fail help
I need correct answer if u don’t know I will report
When the researcher compiled information which research method did they most likely utilize?
a) documentary
b) survey
c) participant observation
d) case study
Answer:
a
Explanation:
documentary is best researcher!.
which selection is an example of an electrolyte
a. potassium iodide in water
b. sucrose in water
c. pentane in octane
d. methanol in water
Answer:
i believe its A, potassium iodide in water
Explanation:
Wine goes bad soon after opening because the ethanol dissolved in it reacts with oxygen gas to form water and aqueous acetic acid , the main ingredient in vinegar. Calculate the moles of acetic acid produced by the reaction of of ethanol. Be sure your answer has a unit symbol, if necessary, and round it to significant digits.
Answer:
The answer is "It takes 1,70 mol of ethanol".
Explanation:
To make acetic acid, we must first write the balanced reaction that occurs of ethanol with oxygen
The response is balanced:
[tex]CH_3CH_2OH+O_2\to CH_3COOH+H_2O[/tex]
1 mol of ethanol creates 1 mol of According the equilibrium Ethanol moles, therefore, required 1.70 mol of water = 1.70 mol
22 Agas that is collected by upward delivery is likely to be A heavier than air B insoluble in water C lighter than air D Soluble in water
Answer:
joib
Explanation:
