What is happening when an oxygen molecule is formed from two separate oxygen atoms?

Answer:

Carbon Dioxide

Explanation:

Carbon dioxide gets turned into oxygen

Answer:

The volume will be 568.89 mL.

Explanation:

Boyle's law says that "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"

Boyle's law is expressed mathematically as:

Pressure * Volume = constant

or P * V = k

Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. That is, the pressure of the gas is directly proportional to its temperature. Gay-Lussac's law can be expressed mathematically as follows:

[tex]\frac{P}{T}=k[/tex]

Where P = pressure, T = temperature, K = Constant

Finally, Charles's law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:

[tex]\frac{V}{T}=k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:

[tex]\frac{P*V}{T} =k[/tex]

Studying an initial state 1 and a final state 2, it is fulfilled:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{960 mmHg*550 mL}{473K} =\frac{830 mmHg*V2}{423 K}[/tex]

Solving:

[tex]V2=\frac{423 K}{830 mmHg} *\frac{960 mmHg*550 mL}{473K}[/tex]

V2= 568.9 mL

The volume will be 568.89 mL.

Answer:

gold i believe or possibly bromine

Explanation:

q- how does fluorine react with gold

a- this fluoride compound features gold in its highest known oxidation state. this red solid dissolves in hydrogen fluoride, but these solutions decompose, liberating fluorine.

q- how does chlorine react with gold

a- gold does react with halogens. it'll, for example, react very slowly with chlorine gas at room temperature to form gold chloride, AuCl3. if gold chloride is heated gently, it will decompose to release the pure elements again.

q- how does bromine react with gold

a- gold in bromine solutions dissolves according to electrochemical/chemical (EC) mechanisms. ... in the chemical composition of the mechanism, this monovalent gold bromide disproportionate into gold and stable AuBr −4 , which reports into solution. with respect to pH, there are two characteristic dissolution regions.

** sorry that i can't provide a sure answer**

good luck :)

i hope this helps

have a nice day!

Fluorine will be most reactive with gold.

What is fluorine?

Of almost all of the elements, fluorine seems to be the most electronegative as well as reactive. Fluorine would be a diatomic, pale yellow, extremely corrosive, combustible gas with a strong smell. The lightest halogen would that be. It produces oxygen and even the incredibly corrosive hydrofluoric acid when it combines strongly with water.

Reactivity would be a substance's capacity to chemically combine with several other substances. Iron, for instance, reacts vigorously with oxygen.

As you move down the group, the halogens, which are non-metal elements in Group 7, become less reactive. In contrast to the alkali metals within Group 1 of the particular periodic table, this trend is the opposite. One of the most reactive elements in Group 7 was fluorine.

To know more about fluorine.

https://brainly.com/question/1940697

#SPJ3

Answer:

B and I think A but you may want a secon opinion on that

Explanation:

I know that electrons are shared with covalent bonds so I assume the 2 answers are the ones with electrons it them

Answer:

V1/T1=V2/T2

4.20L/321.2K=x/288.4K

multiply both side by 288.4

1211.28/321.2=x

x=3.77L

Option 3 13.15 is the  correct answer.

Charles's law exists as an experimental gas law that explains how gases tend to expand when heated. A modern statement of Charles's law exists: When the pressure on a sample of a dry gas exists held constant, the Kelvin temperature and the volume will be in direct proportion.

According to Charles law

The volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.

[tex]V1/T1=V2/T2[/tex]

Where,

[tex]V1[/tex]= first volume

[tex]V{2}[/tex] = second volume

[tex]T{1}[/tex] = first temperature

[tex]T{2}[/tex]= second temperature

Here, at constant pressure,

[tex]V1/T1=V2/T2[/tex]

[tex]V1[/tex]=4.20 L

[tex]V2[/tex]= x

[tex]T1[/tex]=321.2 K

[tex]T2[/tex]=288.4 K

Therefore, [tex]V1/T1=V2/T2[/tex]

4.20L/321.2K=x/288.4K

1211.28/321.2=x

x=3.77L

Thus option a is correct.

To learn more about Charles law refer to:

https://brainly.com/question/16927784

#SPJ2

Answer:

Mass of sodium metal is 130.87 gram

Explanation:

The complete reaction is

2 NaN3 --> 2 Na + 3 N2

We know that PV = nRT

n = [tex]\frac{PV}{RT}[/tex]

On substituting the given values, we get

[tex]n = \frac{\frac{99707}{101325}*75 }{0.082 *(273.15 +15)} \\n = 3.02[/tex]moles of N2

Sodium azide's molar mass

3.02 *(2/3) = 2.013 moles

Mass = 2.03 * 65.01 = 130.87 gram

Answer:

191.11 grams of oxygen gas should be produced.

Explanation:

The balanced reaction is:

2 Al₂O₃ → 4 Al + 3 O₂

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Being the molar mass of each compound:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 108 grams of aluminum are produced along with 96 grams of oxygen, 215 grams of aluminum are produced along with how much mass of oxygen?

[tex]mass of oxygen=\frac{215 grams of aluminum*96 grams of oxygen}{108grams of aluminum}[/tex]

mass of oxygen= 191.11 grams

191.11 grams of oxygen gas should be produced.

Answer:

0.584 J/g°C

Explanation:

Using the formula as follows;

Q = m × c × ∆T

Where;

Q = amount of heat (joules)

m = mass of substance (g)

c = specific heat capacity (J/g°C)

∆T = change in temperature (°C)

According to the information in this question;

mass of substance (m) = 1050g

Initial temperature = 25.7°C

Final temperature = 30.4°C

amount of heat (Q) = 2880J

change in temperature (∆T) = (30.4°C - 25.7°C) = 4.7°C

Using Q = m.c.∆T

c = Q ÷ m∆T

c = 2880 ÷ (1050 × 4.7)

c = 2880 ÷ 4935

c = 0.584 J/g°C

The specific capacity of the substance is 0.584 J/g°C.

Answer:

QUESTION:

Where have you seen or known of examples of waves in YOUR LIFE? Based on science terms of a wave.

ANSWER:

I've seen the following in my life:

~ Lightwaves

~ Heatwaves

~ Electromagnetic waves

~ X-rays

~ Tsunami Waves

Explanation:

Hope that this helps you out! :)          

If you have any questions please put them in the comment section below this answer.          

Have a great rest of your day/night!          

Please thank me on my profile if this answer has helped you.  

Answer:  1. F

2. F

3. T

4. F

5. T

6. T

Explanation:

I am not sure i'm sorry if it isn't right

Answer:

M = 0.47

Explanation:

1 - Turn grams to moles using molar mass:

16g NaOH × 1 mol NaOH / 40g NaOH = 0.4 mol NaOH

2- Turn milliliters to liters:

855mL × 1 L / 1000mL = 0.86 L

3- Use formula which is M = moles of solute / liters of solvent:

M = 0.4 mol NaOH / 0.86 L = 0.47

Answer:

The hot temperature of inner core and outer core is responsible for the production of magnetic field.

Explanation:

The physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field because the very high temperature of inner core is responsible for the formation of magnetic field. If the inner core is not very hot so the magnetic field will not be generated and our earth's atmosphere will not be save from the solar wind. It can be blown away by the solar wind if this magnetic field is not present so we can conclude that the physical properties of inner core and outer core is important for the production of magnetic field.

The answer is true, yw.

Coniferous forests grow in a wide range of climates, from the coldest polar regions to the warmest tropical regions and everything in between. This statement is true.

Conifers are  a type of gymnosperm plants bearing cone like structures in which the seeds are located. Don't be fooled by the fact that coniferous woods are widespread around the world. Some of the wildest trees in the world can be found there.

Hyperion, a coastal redwood tree, is the tallest tree in the world, reaching a height of 379 feet, equivalent to a 35-story structure. From Siberia to Canada, coniferous rainforest biomes can be found. They have cold winters and warm to hot summers.

Temperatures in coniferous forests are quite low all year long. Summertime temperatures range from -7°C to 21°C, while the average wintertime temperature ranges from -54°C to -1°C. Hence, the statement is true.

Find more on conifers:

https://brainly.com/question/30415885

#SPJ6

Answer:

Only individuals with an aa genotype will express a recessive trait; therefore, offspring must receive one recessive allele from each parent to exhibit a recessive trait. One example of a recessive inherited trait is a smooth chin, as opposed to a dominant cleft chin.

Explanation:

Answer:

the answeer is definitely silicon.

Answer:

0.0107 mol

Explanation:

Multiply concentration by volume (in liters) to get moles.

0.5 M • 0.0213 L = 0.0107 mol

Answer:

When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue.

Explanation:

After reading your question, we can see that you are carrying out a test to discover the nature of the pH of a solution. This type of test uses litmus paper, which is an indicator of the presence of acids and bases, being able to determine the pH of a solution. This paper is soaked in organic ink and when placed in an acidic solution, it is red in color. However, when placed in a basic solution it has a blue color.

An acidic solution is one that has a high concentration of H+ atoms and has the ability to donate electrons. The basic solution, on the other hand, has a high concentration of OH- and has the capacity to receive electrons.

When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue, that is, the solution has the basic pH.

Answer:

Explanation:

Maintaining a healthy, perennial plant cover.

Mulching.

Planting a cover crop – such as winter rye in vegetable gardens. ...

Placing crushed stone, wood chips, and other similar materials in heavily used areas where vegetation is hard to establish and maintain.???

Answer:

plastic rays i think the matetial that can widely recycle

Answer:

Insulator

Explanation:

An eraser can't conduct electricity, which makes it an insulator.

Answer:

c

Explanation:

Answer:

64852.94 N/m²

Explanation:

From the question,

P = F/A.................... Equation 1

Where P = Pressure of the Elephant on the ground, F = Weight of the Elephant, A = Area of the sole of the four legs.

But,

F = mg.............. Equation 2

Where m = mass of the elephant, g = acceleration due to gravity

Substitute equation 2 into equation 1

P = mg/A............ Equation 3

Given: m = 4500 kg, A = (1700×4) cm² ( The elephant has four legs) = 6800 cm² = 0.68 m²

Constant; g = 9.8 m/s²

Substitute these values into equation 3

P = (4500×9.8)/0.68

P = 64852.94 N/m²

Answer:

48 grams

Explanation:

The chemical equation for the reaction is the following:

2 H₂ + O₂ → 2 H₂O

That means that 2 moles of H₂ react with 1 mol of O₂ to produce 2 moles of H₂O. We convert the moles of oxygen (O₂) by using the molecular weight (MW) as follows:

MW(O₂) = 16 g/mol x 2 = 32 g/mol

mass of O₂ = 1 mol x 32 g/mol = 32 g

So, we have the following stoichiometric ratio: 32 g O₂/2 moles H₂. We have 3 moles of hydrogen (H₂), so we multiply the moles by the stoichiometric ratio to calculate how many grams are needed:

3 moles H₂ x 32 g O₂/2 moles H₂ = 48 g O₂

Therefore, 48 grams of O₂ are needed to react with 3 moles of H₂.

Answer:

i.e. mass of 1 mole of glucose, C6H12O6 = (6 × 12.01 + 12 × 1.01 + 6 × 16.00) g = 180.18 g (using atomic weight data to 2 decimals) 1 mole of carbon atoms weighs 12.01 g and there are 6 moles of C atoms in 1 mole of glucose, so the mass of carbon in 1 mole of glucose = 6 × 12.01 g = 72.06 g.

"C" is correct.

The Law of Conservation of Mass states that matter can be neither created nor destroyed. This is evident in chemical equations as you will always start and end with the same amount of atoms of every element. They are all still there; they have just been rearranged.

Answer: C) The number of atoms of each element is the same on each side of the equation.

Explanation: Mass cannot be created nor destroyed.

Answer:

the answer is d

Explanation:

hopes this helps

Answer:

When magma cools, crystals form because the solution is super-saturated with respect to some minerals. If the magma cools quickly, the crystals do not have much time to form, so they are very small. If the magma cools slowly, then the crystals have enough time to grow and become large.

Explanation: