What is precipitation and how does it affect weather? (20 points)

We are given:

Mass of the Paint bucket (with paint) = 7000 grams

Mass of the paint bucket (without paint) = 500 grams

Volume of Paint in the Bucket = 5000 cm³

Mass of Paint in the Bucket:

To get the mass of the paint in the bucket, we will subtract the mass of the bucket from the mass of the paint bucket (with paint)

Mass of Paint = Mass of Paint bucket (with paint) - Mass of the paint Bucket (without paint)

Mass of Paint = 7000 - 500

Mass of Paint = 6500 grams

Density of the Paint:

We know that density = Mass / Volume

Density of Paint  = Mass of Paint / Volume occupied by Paint

Density of Paint = 6500/5000

Density of Paint = 1.3 grams / cm³

Answer:

Convection

Explanation:

Convection is heat transfer due to a density differential within a fluid. As water's temperature increases in the presence of a heat source, it will become less dense and rise. As it moves up and away from the heat source, it cools and becomes more dense and sinks.

Answer: the answer is d

Explanation:

Answer: Gamma rays, x-rays, ultraviolet rays, visible light, and infrared rays.

Answer:

C) radio → infrared → ultraviolet → gamma

Explanation:

It Increases left to right therefore it decreases right to left

Answer:

c near water

Explanation:

because well let's say you were out in the rain or ur at an outdoor pool swimming and all of a sudden lighting strikes the water while ur in it...... then you would barely be living bc electric touched water

Answer:

what are the answers to select? or do you just say them

Explanation:

???

Answer:

c and d

Explanation:

Answer:

Cold water slows down dissolving

Cold water slows down dissolving. Hence, option (A) is correct.

The basic relationship between solubility and temperature is as follows: A solid will dissolve more readily at higher temperatures.

Likewise, a solid element dissolves more slowly at lower temperatures. This is all due to the solvent becoming more and more excited by the heat, making it easier for it to split or break apart entirely.

for while in gases The solubility of gases decreases more rapidly as temperature rises. A gas is more soluble in water when the temperature is lower.

Henry's law, which states that the gas becomes more soluble as the pressure above the liquid solution increases, summarizes another characteristic of gas solutes.

Learn more about solubility  here:

https://brainly.com/question/29661360

#SPJ2

Answer:

465 feet because 93*5 = 465, btw that was 1993 not 1933

Explanation:

Answer:

If a zero is found between important digits, it is important. Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: , a mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits.

Explanation:

Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: "A mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits."

Hope this comes in handy, have a great day!

Answer:

iron nail rusting

Explanation:

Answer:

salt

Explanation:

Answer:

35, I got you bro, i got you

Answer:

a. moving the magnet farther away and an iron object.

Explanation:

Answer:A

Explanation:

A p e x

Answer:

Vertical velocity = 8.28 m/s

Horizontal velocity = 28.3 m/s

__________________________________________________________

We are Given:

Initial velocity of the ball = 40 m/s

Angle of elevation of the ball = 45°

Time interval = 2 seconds

__________________________________________________________

Vertical and Horizontal Components:

Vertical Component:

The vertical component of the ball can also be written as:

40*Sin(45°)

40*(1/√2)                                                          [since Sin(45°) = 1/√2]

40/√2 m/s

Horizontal Component:

The horizontal component of the ball can also be written as:

40*Cos(45°)

40*(1/√2)                                               [Since Cos(45°) = 1/√2]

40/√2 m/s

__________________________________________________________

Speed of the Ball after 2 seconds:

Horizontal Velocity:

Since the horizontal velocity is not affected by any force during the flight, the horizontal velocity after 2 seconds will also be 40/√2 m/s

Since √2 = 1.41:

Horizontal velocity = 28.3 m/s

Vertical Velocity:

v = u + at                            [First equation of motion]

v = 40/√2 + (-10)(2)          

[g is negative because it is acting against the direction of motion]

v = 40/√2 - 20

v = [tex]\frac{40-20\sqrt{2} }{\sqrt{2} }[/tex]                          [taking the LCM]

v = 8.28 m/s                    [√2 = 1.41]

Answer:

The answer is below

Explanation:

a) Given that the modulus of elasticity (E) = 317 GPa, to find the modulus of elasticity (in GPa) for the nonporous material ([tex]E_o[/tex]), we use the formula:

[tex]E_0=\frac{E}{1-1.9P+0.9P^2}\\\\where\ P=4.7\%=0.047,hence:\\\\ E_0=\frac{317}{1-1.9(0.047)+0.9(0.047)^2}\\\\E_0=347.3\ GPa[/tex]

b) If the porosity P = 11.1%, then the modulus of elasticity is:

[tex]E=E_0(1-1.9P+0.9P^2)=347.3(1-1.9(0.111)+0.9(0.111)^2)=278\ GPa[/tex]

Answer:

C. backhand stroke

Explanation:

Your hand will be rotated counterclockwise about a fourth of the racquet handle during this stroke. The correct response is to backhand stroke. Option C is correct.

When playing tennis, a backhand is a stroke in which the player's torso is crossed and the ball is struck with the palm towards the opponent's chest and the back of the hand traveling toward them.

A backhand in tennis can be made with one or both hands.

With this stroke, your hand will be turned about a quarter circle counter-clockwise on the handle of your racquet. Backhand stroke is the right answer.

Hence. option C is correct.

To learn more about the backhand stroke refer;

https://brainly.com/question/16095645

#SPJ2

Answer:

The value is  [tex]H = 0.036 \ kg/m^3[/tex]

Explanation:

From the question we are told that

   The saturation density of air is [tex]\rho = 0.04 \ kg/m^3[/tex]

   The temperature for this saturation density to occur  [tex]T_s = 96^o F[/tex]

    The relative humidity at this temperature is  [tex]R_h = 90\% = 0.90[/tex]

Generally the relative humidity is mathematically represented as

      [tex]R_H = \frac{H}{\rho}[/tex]

Here H represents humidity

=> [tex]0.90 = \frac{H}{0.04}[/tex]

=>  [tex]H = 0.90 * 0.04[/tex]

=>  [tex]H = 0.036 \ kg/m^3[/tex]

Answer:

a) [tex] v_{0y} = 9.72 m/s [/tex]

b) [tex] v_{0x} = 20.85 m/s [/tex]

c) [tex] t = 2.01 s [/tex]

d) [tex] h_{max} = 4.82 m [/tex]

Explanation:

a) The initial vertical velocity is given by:

[tex] v_{0y} = v*sin(\theta) [/tex]

Where:

θ: 25°

v: is the magnitude of the speed = 23 m/s

[tex] v_{0y} = 23 m/s*sin(25) = 9.72 m/s [/tex]

b) The initial horizontal velocity can be calculated as follows:

[tex] v_{0x} = v*cos(\theta) = 23 m/s*cos(25) = 20.85 m/s [/tex]

c) The flight time can be calculated using the following equation:

[tex] v_{0x} = \frac{x}{t} [/tex]

Where:

x: is the total distance = 42 m

[tex] t = \frac{x}{v_{0x}} = \frac{42 m}{20.85 m/s} = 2.01 s [/tex]

d) The maximum height is given by:

[tex] v_{fy}^{2} = v_{0y}^{2} - 2gh_{max} [/tex]

Where:

[tex] v_{fy}[/tex]: is the final vertical velocity =0 (at the maximum heigth)

g: is the gravity = 9.81 m/s²

[tex]h_{max} = \frac{v_{0y}^{2}}{2g} = \frac{(9.72 m/s)^{2}}{2*9.81 m/s^{2}} = 4.82 m[/tex]

I hope it helps you!                                  

Answer:

c

Explanation:

because whatever elements are used like gas uses water evaporation so yeah

Answer:

(A) Space between particles!

Explanation:

Solids can hold their shape because their molecules are tightly packed together!

Answer:

m = 0.5

Explanation:

Given that,

The length of the blade of scissors = 5 cm

The length of the handle = 2.5 cm

Here, effort arm is 2.5 cm and load arm is 5 cm. The mechanical advantage is the ratio of effort arm to the load arm as follows :

[tex]m=\dfrac{2.5}{5}\\\\m=0.5[/tex]

So, the ideal mechanical advantage of a pair of scissors is 0.5.

Answer:

A mixture is when two or more substances combine physically together.

However, in water, two hydrogen atoms combine with one oxygen atom chemically, forming a new substance that has properties different from hydrogen alone or oxygen alone.

Explanation: