Answer:
A. all of them
Explanation: Edtell
chemical formula of magnesium nitrate
Hello.
Magnesium nitrate is a chemical compound with the formula Mg (NO₃) ₂. Magnesium nitrate is an inorganic salt very soluble in water and alcohol and has the appearance of fine white crystals.
Magnesium Nitrate is commonly used as a fertilizer due to its high nutritional value, since it provides Magnesium and Nitrogen, these are important nutrients in the growth of crops. It is a water soluble fertilizer. Contains 10.5% N - 15.6% MgO. Provides nitrogen in the form of nitrate.
Which statement describes the "Law of Conservation of Mass" for the following reaction?
4 Fe + 302 -
2 Fe₂O₃
Select one:
tion
a.
grams of Fe + grams of Fe2O3 = grams of O2
O b. grams of O2 + grams of Fe2O3 = grams of Fe
O c. grams of Fe +grams of O2 = grams of Fe203
O d. None of these.
Name this ionic compound.
Answer:
c
Explanation:
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place over the next few minutes?
Molecules in both the metal and the surrounding air will start moving at lower speeds.
Molecules in both the metal and the surrounding air will start moving at higher speeds.
The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up.
The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answer:
d. The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Explanation:
hopes this helps
sorry if it doesn't
:)
A chemist wait out 87.1 g of sodium. Calculate the number of moles of sodium she weighed out. Round your answer to three significant digits
here's the answer to your question
What is the name of a hydrocarbon that has the formula CH3(CH2)4CCH?
6-heptyne
1-heptene
1-heptyne
6-heptene
The name of the hydrocarbon with formula CH₃(CH₂)₄CCH has been 1-heptyne. Therefore, option C is correct.
What are hydrocarbons ?The hydrocarbon has been given as the organic compound with the carbon and hydrogen chain. The molecules are bonded by the covalent bonds.
The hydrocarbon has been named established on the number of carbon in the structure and the bond. The hydrocarbon with single bond has -ane suffix, the double bond hydrocarbon has -ene suffix, and the triple bond hydrocarbon has -yne suffix.
The given hydrocarbon has seven carbon atoms,So the name has been hept. In the presence of a triple bond in the structure, the suffix -yne has been added to it.
Thus, option C is correct.
To learn more about the hydrocarbon, follow the link;
https://brainly.com/question/17578846
#SPJ1
Answer:
C. 1-heptyne
Explanation:
Please answer both questions Thankyou
Answer:
The limiting reactant is oxygen gas and the reaction would produce 3.932 x 10 ^ 7 moles of water
Explanation:
Step 1: Convert everything into moles
nH2(l) = 1.06 x 10^8 g / 2.016 g/mol = 5.26 x 10^7 mols
nO2(l) = 6.29 x 10^8 g / 32.00 g/ mol = 1.966 x 10^7 mols
Step 2: Find the limiting reagent
The limiting reagent would be oxygen gas from
the balanced equation because we have less moles of oxygen gas needed to fully combust with the hydrant gas
Step 3: Stoichiometry time
The mole ratio from oxygen gas to water is 1:2
This means that for every mole of oxygen gas two moles of water is produced
We need to multiply the moles of oxygen gas by two to find out how many moles of water has been produced
nH2O = nO2 x 2
nH2O = 1.966x10^7 x 2
nH2O = 3.932x10^7
Step 4: Therefore statement
Therefore the limiting reactant is oxygen gas and the reaction would produce 3.932 x 10 ^ 7 moles of water
An unknown compound has the following chemical formula: NxO
where x stands for a whole number.
Measurements also show that a certain sample of the unknown compound contains 5.2 mol of nitrogen and 2.65 mol of oxygen
Write the complete chemical formula for the unknown compound.
Taking into account the definition of empirical formula, the complete chemical formula for the unknown compound is N₂O.
The empirical formula of a chemical compound shows the ratio between the atoms of the compound. That is, it indicates which elements are present and the minimum ratio in whole numbers between their atoms. The empirical formula is the simplest chemical formula for a chemical compound, which is why it is also called the minimum formula.
The empirical formula must be expressed using integer relationships, then to obtain this formula, divide the numbers of moles by the smallest result of them. In this case:
Nitrogen: [tex]\frac{5.2 moles}{2.65 moles}[/tex]= 1.96 moles ≅ 2 moles
Oxygen [tex]\frac{2.65 moles}{2.65 moles}[/tex]= 1 mole
Being the chemical formula of hte compound NxO, where x stands for a whole number, this indicates that the elements N and O are in the compound in a whole number ratio of x: 1. Then, as in the empirical formula, the numbers of moles must be expressed in whole numbers, as previously calculated, the value of x must be 2.
In summary, the complete chemical formula for the unknown compound is N₂O.
Learn more about empirical formula and its difference with molecular formula: https://brainly.com/question/13058832?referrer=searchResults
Which of these provides the most creative explanation for how rocks are made at present?
Law of Superposition
O Law of Unconformities
Principle of Uniformitarianism
O Principle of Original Horizontality
Answer:
Principle of Original Horizontality
Calculate the mass percent of carbon,oxygen, nitrogen and hydrogen in acetamide, C2H5NO.
Molar Mass:
O=16, N=14,C=12, H =1.
Answer:
40.68 % C
23.73 % N
8.47% H
27.12% O
Explanation:
The mass percent of an element X in a compound is calculated as the molar mass (MM) of X multiplied by the number of atoms of X in the compound, divided into the molecular weight (MW) of the compound, as follows:
mass percent of X = (MM(X) x number of atoms of X)/MW compound x 100
Thus, we first calculate the MW of acetamide (C₂H₅NO) by using the molar mass of the chemical elements C, H, N and O:
MW(C₂H₅NO) = (12 g/mol C x 2) + (1 g/mol H x 5) + 14 g/mol N + 16 g/mol O = 59 g/mol
Now, we can calculate the mass percent of each element (C, H, N, O) in C₂H₅NO:
Mass percent of C (2 atoms of C in 1 molecule of C₂H₅NO):% mass C = (12 g/mol x 2)/(59 g/mol) x 100 = 40.68 %
Mass percent of N (1 atom of N in 1 molecule of C₂H₅NO):% mass N = (14 g/mol x 1)/(59 g/mol) x 100 = 23.73 %
Mass percent of H (5 atoms of H in 1 molecule of C₂H₅NO):
% mass H = (1 g/mol x 5)/(59 g/mol) x 100 = 8.47 %
Mass percent of O (1 atom of O in 1 molecule of C₂H₅NO):
% mass O = (16 g/mol x 1)/(59 g/mol) x 100 = 27.12 %
The sum of the mass percents has to be equal to 100%:
40.68 % C + 23.73 % N + 8.47% H + 27.12% O = 100%
Por favor, necesito ayuda, es urgente!!!
Answer:
what type of language this is ??
what is the temperature in kelvins of 23 Celsius? hurry pls
Answer:
23°C + 273.15 = 296.15K
I HOPE ITS RIGHT IF NOT THEN SORRYHAVE A GREAT DAY :)
Why slaked lime is used for white wash?
[tex]here \: is \: your \: answer[/tex]
Solution used to white wash the walls is Quick lime(CaO) and when it is mixed with slaked lime [Ca(OH)2]. When this paste is used for white washing it combines with atmospheric CO2 to form calcium carbonate (CaCO3) which gives it a shiny texture.
Name the following compound NiBr2?
Answer:
the Name of NiBr2 is
Nickel(II) bromide
Cual es la longitud de onda de un foton emitido durante la transicion desde el stado n=5 al estado n=3 en atomo Hidrogeno? Dar como respuesta de la longitud de onda en nm (nanometros)
Answer:
1302 nm
Explanation:
Del formulario de Rydberg para longitud de onda
1 / λ = R (1 / nf ^ 2 - 1 / ni ^ 2)
1 / λ = 1.097 × 10 ^ 7 (1/3 ^ 2 - 1/5 ^ 2)
1 / λ = 1.097 × 10 ^ 7 (0.11 - 0.04)
1 / λ = 1.097 × 10 ^ 7 (0.07)
= 1,302 × 10 ^ -6 m
o 1302 nm
TIME REMAINI
166:31:2
Which statement best describes why computer models are useful in science?
O
They can store and process data to make accurate weather predictions.
O They are used to create more complex representations of large systems.
O They cannot be revised after they are developed, tested, and shared with others.
They can be used to accurately make predigtions without scientific evidence.
Answer:
A. They can store and process data to make accurate weather predictions.
Explanation:
Evidentially its very accurate and useful in Science like making accurate Weather predictions.
hope i helped,
Describe how you would prepare a supersaturated solution
Answer:
A supersaturated solution contains more dissolved solute than required for preparing a saturated solution and can be prepared by heating a saturated solution, adding more solute, and then cooling it gently. Excess dissolved solute crystallizes by seeding supersaturated solution with a few crystals of the solute.
Explanation:
If 0.735J of heat is added to 0.9916g of water, how much will the temperature increase?
0.238 oC
0.177 oC
0.310 oC
1.78 oC
Answer:
1.78 oC i think -_-
Explanation:
Have a great day-...
3. 79.0 grams of water was produced with a percent yield of 75.0%. How many grams of
oxygen did he start with?
4. 2.00 moles of oxygen gas at STP will produce how many grams of water, if the percent
yield is 82.0%?
Answer:
Explanation:
3 )
18 grams of water contains 16 grams of oxygen .
Let the grams of oxygen needed be m .
yield is 75%
Only 75 % of m will make water .
.75 m will form water .
water formed by .75 m of oxygen = 18 / 16 x .75 m
Given that
18 / 16 x .75 m = 79
m = (16 x 79) / ( 18 x .75 )
= 93.63 grams .
So oxygen required is 93.63 grams .
4 )
One mole of water contains 0.5 moles of oxygen.
2 moles of oxygen will make 2 /,5 = 4 moles of water .
percent yield is 82 % ,
so water produced = .82 x 4 = 3.28 moles of water.
Which of the following are properties of metalloids?
A. Semi-conductors
B. All of these
C. React like metals sometimes
D. React like non-metals sometimes
Answer:
all of these are properties of metalloids
Answer:
The answer is B. All of these
Explanation:
Can you mark me the brainliest?
Using salt and ice to make ice cream is an example of:
Answer:
An exothermic reaction
Explanation:
Which of the following is true for the equilibrium constant of a reaction?
It is a ratio of the concentrations in a reaction.
It remains the same at different temperatures.
It is represented by the symbol H.
Its value is always close to 1.
Answer:
The correct answer is It is a ratio of the concentrations in a reaction.
Explanation:
⇒ It is a ratio of the concentrations in a reaction.
This sentence is true because the equilibrium constant is calculated from the product of the concentration of the reaction products divided into the product of the concentrations of the reactants, each concentration raised by the stoichiometric coefficient. For example, for the following reaction:
aA + bB → cC + dD
The equilibrium constant is expressed as:
[tex]K = \frac{[C]^{c}[D]^{d} }{[A]^{a} [B]^{b} }[/tex]
⇒ It remains the same at different temperatures.
The sentence is false because the equilibrium constant changes with the temperature. In general, an endothermic reaction is favored by the increment of temperature (the equilibrium shifts to the right side) and disfavored with the decrease in temperature (shifts to the left).
⇒ It is represented by the symbol H.
This sentence is false because the equilibrium constant is represented with the letter K.
⇒ Its value is always close to 1.
It is not true because the equilibrium constant can be a number below or above 1.
K < 1 ⇒ there is more concentration of reactants at equilibrium
K > 1 ⇒ there is more concentration of products at equilibrium
Characteristics of a mixture?
Answer:
the substance mixture can be sperate by filtration, distillation, and freezing.
Why boiling point is less at hilly station?
2. Sulfur dioxide gas (SO2) reacts with excess oxygen gas (O2) and excess liquid water (H2O) to form liquid sulfuric acid (H2SO4). In the laboratory, a chemist carries out this reaction with 67.2 L of sulfur dioxide and gets 250 g of sulfuric acid.
• Write a balanced equation for the reaction.
• Calculate the theoretical yield of sulfuric acid.
• Calculate the percent yield of the reaction.
(One mole of any gas occupies 22.4 L under certain conditions of temperature and pressure. Assume those conditions for this question.)
Answer:
See explanation
Explanation:
The balanced equation for the formation of sulphuric acid is;
2SO2 + O2 + 2H2O → 2H2SO4
If 1 mole of SO2 occupies 22.4 L
x moles occupy 67.2 L
x = 1 × 67.2/22.4
x= 3 moles
From the reaction equation;
2 moles of SO2 yields 2 moles of H2SO4
Hence 3 moles of SO2 also yields 3 moles of H2SO4
Theoretical yield of H2SO4 = 3 moles × 98 g/mol = 294 g
Percent yield = actual yield/theoretical yield × 100
Percent yield = 250g/294g × 100
Percent yield = 85%
if shoto todoroki has a half hot half cold quirk and he eats a ice cube does one half melt and one half freeze
Answer:
in a way yes and no
Explanation:
shoto can control the temperature of both of his quirks so one can over power the other
he can melt the ice with the fire
and freeze the fire over the ice
hope it helps
(c) Describe and explain how fractional distillation can be used to separate a mixture of neon,
argon, krypton and xenon.
Answer:
in fractional distillation we look at different boiling point of the mixture
Explanation:
argon will be separated from the mixture first because it has the lowest boiling point
The mixture of elements of gases of neon,argon, krypton and xenon can be separated using fractional distillation as the have difference in their boiling points.
What is an element?
An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ2
Identifica las formas de energía mecánica
(cinética y potencial) que tienen lugar en diferentes puntos del movimiento en
un sistema mecánico (caída libre, montaña rusa, péndulo).
2 Tipos de Energía Mecánica
2.1 1. Energía hidráulica
2.2 2. Energía eólica
2.3 3. Energía Mareomotriz
3 Ejemplos de Energía Mecánica
3.1 1. Planta hidroeléctrica
3.2 2. Máquinas de Vapor
3.3 3. Motor de Combustión interna
3.4 4. Molinos de Viento
3.5 5. Un Juego de Billar
3.6 6. Motor eléctrico
3.7 7. Locomotora
3.8 8. Bala
3.9 9. Una pistola de Dardos
3.10 10. Pelota sobre una mesa
https://www.aura-energia.com/ejemplos-de-energia-mecanica/
calculate the volume in L od 2.11mol/L CuSo4(aq) solution that contains 0.41 mol copper(2) sulfate
Answer:
0.194L
Explanation:
Molarity of a solution is its molar concentration, and can be calculated using the formula:
Molarity = no. of moles (n) ÷ volume (V)
According to this question, the molar concentration/molarity of a solution of copper sulfate (CuSO4) is 2.11mol/L and contains 0.41 mol CuSO4. The volume can be calculated as follows;
Volume = no. of moles ÷ molarity
Volume = 0.41mol ÷ 2.11mol/L
V = 0.194 liter
PLEASE SOMEONE HELP ME WITH THIIS QUESTION
The labels have fallen off three bottles. Bottle A contains a gas, bottle B contains a liquid and bottle C contains a solid. The labels indicate that the compounds have the same number of carbon atoms, one being and alkane, one an alcohol, and the other a carboxylic acid. Suggest the identity of the contents of each bottle, and give reasons for your answer.
Answer:
The correct answer is - 5 carbon compounds due to low to high intermolecular forces between their molecules.
Explanation:
Bottle C has gas in it and we know that alkane has carbon and hydrogen only which means they have a single sigma bond between them and very low intermolecular forces in between molecules and are present mostly at gaseous state. Thus, bottle C has alkane.
Alcohols have -OH group that can form rarely two pi bonds which means they have intermediate intermolecular force whereas acids have -cooH group with a high molecular force so bottle B with liquid is alcohol and A has acid.
How does the arrangement of particles determine the physical properties of different states of matter?
Answer:
See explanation
Explanation:
Matter may exist in three phases; solid, liquid and gas. The state in which matter exists depends on the extent of intermolecular forces operating in the substance.
In solid particles, the molecules that compose the solid are close together because the molecules of a solid do not move from place to place but they continue to vibrate about their fixed position.
For liquids, the molecules that compose a liquid are in random motion but are less energetic than molecules of a gas.
In gases, the molecules are not held together at all. The molecules of a gas have the highest degree of freedom. They move from one point another at a high velocity.
Hence, the order of increasing degree of movement of the particles in different states of matter = solids<liquids< gases.
Solids have well arranged particles, the molecules of a liquid are a little more disorderly than liquid particles while gas particles are the most disorderly of all the states of matter.