Answer:
Mediums in which the speed of sound is different generally have differing acoustic impedances, so that, when a sound wave strikes an interface between
Explanation:The propagation of a wave through a medium will depend on the properties of the medium. For example, waves of different frequencies may travel
Two steamrollers begin 105 mm apart and head toward each other, each at a constant speed of 1.20 m/s. At the same instant, a fly that travels at a constant speed of 2.50 m/s starts from the front roller of the southbound steamroller and flies to the front roller of the northbound one, then turns around and flies to the front roller of the southbound once again, and continues in this way until it is crushed between the steamrollers in a collision.
Required:
What distance does the fly travel?
Answer: 109.4 mm
Explanation: Distance is a scalar quantity and it is the measure of how much path there are between two locations. It can be calculated as the product of velocity and time: d = vt
The separation between the two steamrollers is 105 mm or 0.105 m. They collide to each other at the middle of the separation:
location of collision = [tex]\frac{0.105}{2}[/tex] = 0.0525 m
To reach that point, both steamrollers will have spent
[tex]v=\frac{\Delta x}{t}[/tex]
[tex]t=\frac{\Delta x}{v}[/tex]
[tex]t=\frac{0.0525}{1.2}[/tex]
t = 0.04375 s
The fly is travelling with speed of 2.5 m/s. So, at t = 0.04375 s:
d = 2.5*0.04375
d = 0.109375 m
Until it is crushed, the fly will have traveled 109.4 mm.
Curtis, a student in our class, makes the following statement: The puck reached a slightly higher location on the ramp than I predicted. This is because I used the wrong mass for the puck when I did all my calculations. I accidentally used the mass of the smaller puck rather than the mass of the larger puck in my video." Is this a plausible explanation? Would the using the wrong mass for the puck during the calculations mean the puck would reach a greater height? Explain your reasoning.
Answer and Explanation: No, the explanation is not plausible. The puck sliding on the ice is an example of the Principle of Conservation of Energy, which can be enunciated as "total energy of a system is constant. It can be changed or transferred but the total is always the same".
When a player hit the pluck, it starts to move, gaining kinetic energy (K). As it goes up a ramp, kinetic energy decreases and potential energy (P) increases until it reaches its maximum. When potential energy is maximum, kinetic energy is zero and vice-versa.
So, at the beginning of the movement the puck only has kinetic energy. At the end, it gains potential energy until its maximum.
The representation is as followed:
[tex]K_{i}+P_{i}=K_{f}+P_{f}[/tex]
[tex]K_{i}+0=0+P_{f}[/tex]
[tex]\frac{1}{2}mv^{2} = mgh[/tex]
As we noticed, mass of the object can be cancelled from the equation, making height be:
[tex]h=\frac{v^{2}}{2g}[/tex]
So, the height the puck reaches depends on velocity and acceleration due to gravity, not mass of the puck.
A car is traveling on a straight road at a constant 35 m/sm/s, which is faster than the speed limit. Just as the car passes a police motorcycle that is stopped at the side of the road, the motorcycle accelerates forward in pursuit. The motorcycle passes the car 13.5 ss after starting from rest. What is the acceleration of the motorcycle (assumed to be constant)
Answer:
2.59m/s
Explanation:
Using the equation of motion
v = u+at
v is the final velocity = 35ms
u is the initially velocity = 9m/s
t is the time = 13.5s
a is the acceleration
Substitute into the formula
35 = 0+13.5a
a = 35/13.5
a = 2.59m/s²
Hence the acceleration of the motorcycle is 2.59m/s
What do you think would happen to the force of attraction of two interacting charges if their distance apart is halved?
Answer:
The new force becomes 4 times the initial force.
Explanation:
The force of attraction or repulsion is given by the relation as follows :
[tex]F=k\dfrac{q_1q_2}{d^2}[/tex]
Where
d is the distance between the interacting charges
F is inversely proportional to the distance between charges.
If the distance is halved, d'=(d/2), new force is given by :
[tex]F'=k\dfrac{q_1q_2}{d'^2}\\\\=k\dfrac{q_1q_2}{(\dfrac{d}{2})^2}\\\\=k\dfrac{q_1q_2}{\dfrac{d^2}{4}}\\\\=4\times \dfrac{kq_1q_2}{d^2}\\\\F'=4F[/tex]
So, the new force becomes 4 times the initial force.
The 49-g arrow is launched so that it hits and embeds in a 1.45 kg block. The block hangs from strings. After the arrow joins the block, they swing up so that they are 0.44 m higher than the block's starting point.
Required:
How fast was the arrow moving before it joined the block?
Answer:
the initial speed of the arrow before joining the block is 89.85 m/s
Explanation:
Given;
mass of the arrow, m₁ = 49 g = 0.049 kg
mass of block, m₂ = 1.45 kg
height reached by the arrow and the block, h = 0.44 m
The gravitational potential energy of the block and arrow system;
P.E = mgh
P.E = (1.45 + 0.049) x 9.8 x 0.44
P.E = 6.464 J
The final velocity of the system after collision is calculated as;
K.E = ¹/₂mv²
6.464 = ¹/₂(1.45 + 0.049)v²
6.464 = 0.7495v²
v² = 6.464 / 0.7495
v² = 8.6244
v = √8.6244
v = 2.937 m/s
Apply principle of conservation of linear momentum to determine the initial speed of the arrow;
[tex]P_{initial} = P_{final}\\\\mv_{arrow} + mv_{block} = (m_1 + m_2)V\\\\0.049(v) + 1.45(0) = (0.049 + 1.45)2.937\\\\0.049v = 4.4026\\\\v = \frac{4.4026}{0.049} \\\\v = 89.85 \ m/s[/tex]
Therefore, the initial speed of the arrow before joining the block is 89.85 m/s
The arrow moving as the speed of "76.36 m/s".
According to the question,
By using the conservation of energy, we have
→ [tex]K.E=P.E[/tex]
→ [tex]\frac{1}{2} (m_1+m_2)v_2^2= (m_1+m_2)gh[/tex]
or,
→ [tex]v_2 = \sqrt{2mgh}[/tex]
By substituting the values, we have
→ [tex]= \sqrt{2\times 9.8\times 0.44}[/tex]
→ [tex]=2.469 \ m/s[/tex]
Now,
By using the conservation of momentum, we get
→ [tex]m_1 v_1 = (m_1+m_2) v_2[/tex]
or,
→ [tex]v_1 = \frac{(m_1+m_2)v_2}{m_1}[/tex]
[tex]= \frac{1.45+0.049}{0.049}\times 2.469[/tex]
[tex]= 30.6\times 2.496[/tex]
[tex]= 76.36 \ m/s[/tex]
Thus the above approach is correct.
Learn more:
https://brainly.com/question/14928804
Why is deforestation a serious global environment problem
Answer:
we all know that deforestation is when tress are cut down but this may cause cardio dioxide to go up into the atmosphere and this may cause the rise in sea level and temperates tend to fluctuate
Explanation:
I'm just that smart yah dig
In which number are the zeros not significant?
100.0
O 0.0003
O 4.00005
O 1.0004
Answer:
0.0003
Explanation:
In the rules of Sig Figs, all zeros before with decimals are not sigificant. I.E. 0.00000000000000009. Despite how many 0's there are, only the 9 is significant. Zeros before a number is not significant. In 100, only the one is signficant in 100. with a dot at the end, the one and the two zeros are significant. hope this helps.
Answers:
the second option
Explanation:
Which of the following is a vector quantity?
speed
distance
acceleration
Which is larger: 65 mph (miles per hour) or 120 kph (kilometers per hour)? As a percentage, how much faster is one than the other?
To Find :
Which is larger: 65 mph (miles per hour) or 120 kph (kilometers per hour).
Solution :
We know, 1 mph = 1.61 kph
So, 65 mph = 1.61 × 65 kph
65 mph = 104.65 kph
Since, 65 mph is 104.65 kph which is smaller than 120 kph.
Therefore, 120 kph is faster than 65 mph by ( 120 - 104.65 ) = 15.35 kph.
A hotel elevator ascends 200m with maximum speed of 5m/s. Its acceleration and deceleration both have a magnitude of 1.0m/s2. Part APart complete How far does the elevator move while accelerating to full speed from rest? Express your answer with the appropriate units. 12.5 m Previous Answers Correct Part B How long does it take to make the complete trip from bottom to top? Express your answer with the appropriate units.
Answer:
45 s .
Explanation:
The accelerator will first accelerate , then move with uniform velocity and at last it will decelerate to rest .
displacement s = ?
acceleration a = 1 m /s²
Final speed v = 5 m/s
initial speed u = 0
v² = u² + 2as
5² = 0 + 2 x 1 x s
s = 12.5 m
B) Let time of acceleration or deceleration be t
v = u + a t
5 = 0 + 1 t
t = 5 s
Similarly displacement during deceleration = 12.5 m
Total distance during uniform motion = 200 - ( 12.5 + 12.5 ) = 175 m .
velocity of uniform motion = 5 m /s
time during which there was uniform velocity = 175 / 5 = 35 s
Total time = 5 + 35 + 5 = 45 s .
An atom undergoes nuclear decay, but its atomic number is not changed.
What type of nuclear decay did the atom undergo?
A. Gamma decay
B. Beta decay
C. Nuclear fission
D. Alpha decay
Answer:
A. Gamma decay
Explanation:
A form of nuclear decay in which the atomic number is unchanged is a gamma decay.
The atom has undergone a gamma decay.
In a gamma decay, no changes occur to the mass and atomic number of the substance.
Gamma rays have zero atomic and mass numbers. When they cause decay, they cause no change to the mass and atomic numbers. They simply produce gamma rays during such reactions and these rays are very energetic.A person pushes down on a lever with a force of 100 N. At the other end of the lever, a force of 200 N lifts a heavy object. What is the mechanical advantage of the lever?
A. 1/2, because the object will be lifted half the distance
B. -1, because the direction changes
C. 2, because the output force is twice the input force
D. 1, because the same amount of work is done
Answer:
Explanation:
C 200÷100=2
Output ÷ Input= MA
A 40 kg boy standing on a skateboard throws a 2 kg ball 20 m/s to the left.
a. What is the ball's momentum?
O 10 kg m/s
O 20 kg mis
O 40 kg m/s
O 1 kg m/s
Answer:
40 kg m/s
Explanation:
Given the following data;
Mass of boy = 40kg
Mass of ball = 2kg
Velocity = 20m/s
To find the momentum;
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
Momentum =mass * velocity
Substituting into the equation, we have
Momentum = 2 * 20
Momentum = 40 kg m/s
How much kinetic energy does a 0.104 kg hamster have if it is moving at 24.0 m/s?
Answer:
30J
Explanation:
Given parameters:
Mass of hamster = 0.104kg
Velocity = 24m/s
Unknown:
Kinetic energy = ?
Solution:
Kinetic energy is the energy due to the motion of a body. It is mathematically derived by;
Kinetic energy = [tex]\frac{1}{2}[/tex] m v²
m is the mass
v is the velocity
Kinetic energy = [tex]\frac{1}{2}[/tex] x 0.104 x 24² = 30J
A ball of mass m makes a head-on elastic collision with a second ball (at rest) and rebounds in the opposite direction with a speed equal to one-fourth its original speed. what is the mass of the second ball?
When a ball of mass m makes a head-on elastic collision with a second ball (at rest) and rebounds in the opposite direction with a speed equal to one-fourth its original speed, then mass of the second ball having v/3 is velocity after collision is 9m/4.
What is momentum ?Momentum is defined as mass times velocity of body. it is denoted by p and its SI unit is Kg.m/s. It has both magnitude and direction. it is a vector quantity. it tells about the moment of the body. it is denoted by p and expressed in kg.m/s. mathematically it is written as p = mv. A body having zero velocity or zero mass has zero momentum. its dimensions is [M¹ L¹ T⁻¹]. Momentum is conserved throughout the motion.
initial momentum = final momentum
Given,
mass of first body m₁ = m
initial velocity of first body = v₁' = v
final velocity of first body = v₁'' =v/4
mass of second body m₂ = ?
initial velocity of second body = v₂' = 0
final velocity of second body = v₂'' = v/3
According to conservation of momentum,
initial momentum = final momentum
m₁v₁' + m₂v₂' = m₁v₁'' + m₂v₂''
putting al above values
m₁v + 0 = m₁v/4 + m₂v/3
m₁v - m₁v/4 = m₂v/3
m (1 - 1/4)v = m₂v/3
3m/4 = m₂/3
m₂ = 9m/4
Hence mass of the second body is 9m/4.
To know more about momentum, click :
https://brainly.com/question/30677308
#SPJ3
A long, straight wire carries a current of 5.20 A. An electron is traveling in the vicinity of the wire. At the instant when the electron is 4.40 cm from the wire and traveling at a speed of 6.20 * 104 m>s directly toward the wire, what are the magnitude and direction (relative to the direction of the current) of the force that the magnetic field of the current exerts on the electron
Answer:
Explanation:
Magnetic field due to current at a distance of 4.4 cm
B = 10⁻⁷ x 2 x 5.2 / 4.4 x 10⁻² [ B = 10⁻⁷ x 2i / r = ]
= 2.36 x 10⁻⁵ T.
Force on moving electron = Bqv , B is magnetic field , q is charge and v is velocity of charge .
Force = 2.36 x 10⁻⁵ x 1.6 x 10⁻¹⁹ x 6.2 x 10⁴
= 23.41 x 10⁻²⁰ N .
This force will be perpendicular to the direction of current .
Einstein's equivalence principle says that __________. Einstein's equivalence principle says that __________. everyone measures the speed of light to be equivalent someone traveling at 0.9c will age at the same rate as someone at 0.99c all people see themselves at an equivalent distance to the center of the universe the effects of gravity are exactly equivalent to the effects of acceleration
Answer:
Einstein's equivalence principle says that __________.
the effects of gravity are exactly equivalent to the effects of acceleration
Explanation:
The equivalence principle is one of the fundamental laws of physics, as enunciated by Einstein. It categorically states that the gravitational and inertial forces are of a similar nature. In physics, a gravitational acceleration is the acceleration of an object in a free fall within a space. The importance of Einstein's Equivalence Principle is explained by his theory of general relativity. This theory states that mass is the same, whether inertial or gravitational.
According to the Einstein's equivalence principle, the effects of gravity are exactly equivalent to the effects of acceleration.
Einstein's equivalence principle says that the effects of gravity are exactly equivalent to the effects of acceleration.
What is Einstein's equivalence principle?Einstein's equivalence principle states that the the force due to gravity and the force of inertia are similar in the nature and there is no need to distinct them.
The inertia force is opposite in direction to accelerating force of a body. Thus the Einstein's equivalence principle can also be stated as "the effects of gravity are exactly equivalent to the effects of acceleration." Form the given option the correct option which can be filled in the blank is option 2 which states that the effects of gravity are exactly equivalent to the effects of acceleration.Thus Einstein's equivalence principle says that the effects of gravity are exactly equivalent to the effects of acceleration.
Learn more about the Einstein's equivalence principle here
https://brainly.com/question/20533998
Which of the following is a mixture?
a air
biron
Chydrogen
d nickel
This table shows the mass and volume of four different objects.
A two-column table with 4 rows. The first column titled objects has entries W, X, Y, Z. The second column titled Measurements has entries Mass: 16 grams Volume: 84 centimeters cubed in the first cell, Mass: 12 grams Volume: 5 centimeters cubed in the second cell, Mass: 4 grams Volume: 6 centimeters cubed in the third cell, Mass: 408 grams Volume: 216 centimeters cubed in the fourth cell.
Which ranks the objects from most to least dense?
Answer:
Here its right but its also better than Barney's response
Explanation:
W, Y, Z, X or C
Answer:
W, Y, Z, X
Explanation:
why do players choose to follow the unconventional route of kicking down the middle
Answer:
My biggest reason is to make it a habit. Even if the ball goes into the endzone it is a live ball and the offensive players must down the ball. Don't leave any room for "I thought he downed it" or "I thought I heard the whistle" just run to the ball always.
If the players slow down and the returner takes it out of the end zone it could be a big return. Players are on a full sprint for 40+ yards sometimes and instead of breaking down, they choose to contine through the goal line to slow down at a decreased rate (possibly limiting a muscle pull injury).
How is energy transferred when
hitting a nail?
Answer:
kinetic energy
kinetic energy
When a moving object collides with an object that isn't moving, what happens to the kinetic energy of each object?
All the objects are motionless, so kinetic energy of each object is zero after the collision.
What is Kinetic Energy?The kinetic energy of an object is defined as the energy which is possesses due to its motion. It is the work required to accelerate a body of a given mass from rest to its stated velocity. This energy is gained during its acceleration, the body maintains the kinetic energy as long as its momentum does not change.
Kinetic Energy can be expressed as
[tex]K.E.=[/tex] [tex]1/2 mv^2[/tex]
Where, m is the mass of the object
v is the velocity.
It is expressed in joules (J).
After the collision all the objects are at rest, therefore, the final kinetic energy is also zero which shows maximum loss of kinetic energy. Such collisions are called perfectly inelastic.
Thus, all the objects are motionless, so kinetic energy of each object is zero after the collision.
Learn more about Kinetic Energy, here:
https://brainly.com/question/26472013
#SPJ2
What happens to kinetic energy when you decrease the velocity of a moving object?
A school is creating a small parking lot next to the school. They will need
998,140 grams of rock for the parking lot. How many pounds of rock does
the school need? (1 kg = 2.205 lb)
Answer:
2200.9lb
Explanation:
This is a conversion problem.
We have been given that:
Mass of rock the school needed = 998140g
Unknown:
Pound of rocks the park needed = ?
To solve this problem, we have to convert from:
grams to kilograms and then to pounds
1000g of the rock will weigh 1kg
So; 998140g of the rock will weight 998.14kg
Therefore:
1kg of a substance weighs 2.205lb
998.14g will weight2.205 x 998.14 = 2200.9lb
Anyone can help me out with this question ? Just number 2,
Answer:
- 21⁰C .
Explanation:
Speed of jet = 2.05 x 10³ km /h
= 2050 x 1000 / (60 x 60 ) m /s
= 569.44 m / s
Mach no represents times of speed of sound , the speed of jet
1.79 x speed of sound = 569.44
speed of sound = 318.12 m /s
speed of sound at 20⁰C = 343 m /s
Difference = 343 - 318.12 = 24.88⁰C
We know that 1 ⁰C change in temperature changes speed of sound
by .61 m /s
So a change in speed of 24.88 will be produced by a change in temperature of
24.88 / .61
= 41⁰C
temperature = 20 - 41 = - 21⁰C .
The number of employees for a certain company has been decreasing each year by 4%. If the company currently has 650 employees and this rate continues, find
the number of employees in 20 years.
The number of employees in 20 years will be approximately
(Round to the nearest whole number as needed)
HELP PLEASE!
A car traveling west at 15 m/s and speeds up to 20 m/s west in 5 seconds. Why is the acceleration of the car?
Answer:
1 m/s
Explanation:
5m/s change in velocity, divided by 5 seconds= 1 meter/second/second
change in velocity/change in time
Acceleration = (change in velocity) / (time for the change)
that's = (change in speed and its direction) / (time for the change)
Change in velocity = (ending velocity) - (starting velocity)
Change in velocity = (20 m/s west) - (15 m/s west)
Change in velocity = 5 m/s west
Acceleration = (5 m/s west) / (5 seconds)
Acceleration = 1 m/s west
Suppose two children push horizontally, but in exactly opposite directions, on a third child in a wagon. The first child exerts a force of 75.0N, the second child exerts a force of 90.0 N, friction is 12.0 N, and the most of the third child plus wagon is 23.0 kga)what is the system of interest if the acceleration of the child in the wagon is to be calculated
Answer:
Explanation:
75 N and 90 N are acting in opposite direction so net force = 90 - 75 = 15 N .
Friction force will act in the direction opposite to the direction of net force .
So friction force will act in the direction in which 75 N is acting .
Total force acting in the direction of 75 = 75 + 12 = 87 N
Net force acing on the third child = 90 - 87 = 3 N
Its direction will be that in the direction of 90 N .
please help asap!!
Explain the movement of a roller coaster in terms of potential and kinetic energy? When are these energies thegreatest? Smallest? Are they ever the same?
Answer:
Potential energy: Greatest at the top of the hill
Kinetic energy: Greatest at the bottom of the hill
The two meet at some point on the way down!
Explanation:
Potential energy is energy that represents an object's potential for motion. Kinetic energy is that object's energy during motion. They're two sides of the same coin, and in fact, their sum gets a special name: mechanical energy. Potential energy builds up in reaction to working against certain forces - in the case of the roller coaster, that primary force is gravity. Gravity exerts a downward force on the roller coaster, and it takes work to pull it up the hill.
When it reaches the peak, the coasters potential energy is at its highest, and the moment it crests over the hill and begins its descent, that gravitational potential energy starts converting into kinetic energy: the coaster starts accelarating down the track, and the potential energy decreases at the same rate that the kinetic energy increases.
At the bottom of the hill, all of that potential energy has become kinetic energy, and the coaster zooms along the track, hopefully not giving too many riders nausea
a block of mas \( m \) = 4.8 kg slides head on into a spring of spring constant \( k \) = 430 N/m. When the block stops, it has compressed the spring by 5.8 cm. The coefficient of kinetic friction between block and floor is 0.28. \( (g =9.8m/s^2) \)
Answer:
See explanation below
Explanation:
The question is incomplete. The missing part of this question is the following:
"While the block is in contact with the spring and being brought to rest, what are (a)the work done by the spring force and (b) the increase in thermal energy of the blockfloor system? (c) What is the blocks speed just as it reaches the spring?"
According to this we need to calculate three values: Work, Thermal Energy and Speed of the block when it reaches the spring.
Let's do this by parts.
a) Work done by the spring:
In this case, we need to apply the following expression:
W = -1/2 kx² (1)
We know that k = 430 N/m, and x is the distance of compressed spring which is 5.8 cm (or 0.058 m). Replacing that into the expression:
W = -1/2 * 430 * (0.058)²
W = -0.7233 Jb) Increase in thermal energy
In this case we need to use the following expression:
ΔEt = Fk * x (2)
And Fk is the force of the kinetic energy which is:
Fk = μk * N (3)
Where μk is the coeffient of kinetic friction
N is the normal force which is the same as the weight, so:
N = mg (4)
Let's calculate first the Normal force (4), then Fk (3) and finally the chance in the thermal energy (2):
N = 4.8 * 9.8 = 47.04 N
Fk = 0.28 * 47.04 = 13.1712 N
Finally the Thermal energy:
ΔEt = 13.1712 * 0.058
ΔEt = 0.7639 Jc) Block's speed reaching the spring
As the block is just reaching the speed, the initial Work is 0. And the following expression will help us to get the speed:
V = √2Ki/m (5)
And Ki, which is the initial kinetic energy can be calculated with:
Ki = ΔU + ΔEt (6)
And ΔU is the same value of work calculated in part (a) but instead of being negative, it will be positive here. So replacing the data first in (6) and then in (5), we can calculate the speed:
Ki = 0.7233 + 0.7639 = 1.4872 J
Finally the speed:
V = √(2 * 1.4872) / 4.8
V = 0.7872 m/sHope this helps
