Explanation:
The terms ‘sand’ and ‘soil’ are often interchanged and used synonymously with one another. Many people consider them the same, but when scrutinized, they are quite different from each other. First and foremost, sand is a type of soil–so is silt, clay, peat, and loam. These types of soils are generated when rocks break up into their constituent parts and are acted upon by outside forces, such as wind, water, and natural salts. The broad definition of soil refers to the loose layer of earth that covers the surface of the planet. Sand, on the other hand, is defined as loose material that consists of rocks or mineral grains.
Answer:
soil is defined as the top layer of the land surface of the earth that is composed of disintegrated rock particles, humus, water, and air.
sand is defined as a loose material that consists of rocks or mineral grains.
Explanation:
Which object is smaller than a cell?
Molecule
Organ
Organism
Tissue
Answer:
Molecule
Explanation:
Levels of organization (atom-molecule-cell-tissue-organ-organ-system-organism)
what element has 5 protons, 7 electrons, and 6 neutrons
Answer: Boron
Explanation: lol
Answer:
Boron. (What kind of name is that?????????????)
Explanation:
1.9x10^23 atoms of sulfur to grams of sulfur
Answer:
see explanation and punch in the numbers yourself ( will be better for your test)
Explanation:
If you are given atoms you need to divide by Avogadro's number 6.022x10^23
then you will have moles of sulfur-- once you have moles multiply by the molar mass of sulfur to go from moles to grams
mm of sulfur is 32 g/mol
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, the grams of sulfur in 1.9x10²³ atoms of sulfur is 9.92g.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance.
Given number of atoms= 1.9x10²³atoms
we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number
mole =given number of atoms ÷ 6.022×10²³(Avogadro number)
Substituting the values
mole=1.9x10²³÷ 6.022×10²³
mole = 0.31 mole of sulfur
Mole = given mass÷ Molar mass
Molar mass of sulfur=32g/mol
mass of sulfur =0.31 mole ×32g/mol
mass of sulfur=9.92g
Therefore, the grams of sulfur in 1.9x10²³ atoms of sulfur is 9.92g.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
Complete the sentence:
The north pole of a magnet____ the north pole of another magnet.
-will attract
-may repel, attract, or not affect
-will not affect
-will repel
the north pole of the magnet will repel the north pole of another magnet
Which of the following accurately describes the orbital path of most planets in our solar system?
The orbital path is in a perfect circle.
The orbital path looks circular.
The orbital path is in a large elliptical shape.
The orbital path varies greatly from planet to planet.
A scientist is designing a device that will kill harmful cells in the human body using high-energy waves. Which type of wave would be most effective
А
X-rays would be the best choice because they have a long wavelength and a low frequency
accomplishing this goal?
B
Radio waves would be the best choice because they have a long wavelength and a low frequency
Gamma rays would be the best choice because they have a short wavelength and a high frequency
D
Infrared waves would be the best choice because they have a short wavelength and a high frequency
C2021 Illuminate Education Inc.
Tin
Type here to search
O
BH
Answer:
gamma rays
Explanation:
gamma Ray's have the highest frequency
How many grams of glycerine, C3H8O3, are needed to make 100. mL of 2.60 M solution?
Answer:
the mass of the glycerine needed in the given solution is 23.92 g
Explanation:
Given;
molarity of the solution (C₃H₈O₃), C = 2.60 M
Volume of the solution, V = 100 mL = 100 x 10⁻³ L = 0.1 M
The molarity of a solution is given as follows;
[tex]Molarity = \frac{amount \ of \ solute \ (moles)}{volume \ of \ solution \ (L)} \\\\amount \ of \ solute \ (moles) = Molarity \ \times volume \ of \ solution \ (L)\\\\amount \ of \ solute \ (moles) = 2.6 \times 0.1 \\\\amount \ of \ solute \ (moles) = 0.26 \ mole[/tex]
The molecular mass of the given solution;
molecular mass = (12 x 3) + (8 x 1) + (16 x 3)
molecular mass = 92 g/mol
The mass of the glycerine needed in the given solution is calculated as follows;
reacting mass = amount of solute (moles) x molecular mass (g/mol)
reacting mass = 0.26 x 92
reacting mass = 23.92 g
Therefore, the mass of the glycerine needed in the given solution is 23.92 g
The attraction between water molecules and a Nation or a Clion occurs because water molecules are —
A.
nonpolar
B
symmetrical.
С
polar.
D
linear.
Answer:
answer is
c. Polar
hope this helps
Describe the composition of a molecular compound. What are two major characteristics of molecular compounds?
Answer:
A molecular compound is composed of two or more non metallic elements that are held together by covalent bonds.
The two major characteristics of molecular compounds are;
1.) They are held by covalent bonds
2.) They generally have poor conductivity
Explanation:
A molecular compound is one where two or more molecules come together to form a compound. Unlike ionic compounds that combine by the transfer of electrons, molecular compounds form by sharing electrons. The pairing of the electrons is what holds the molecules together and is known as covalent bonding.
A molecular compound has various characteristics, some of which are;
- Generally low melting and boiling points
- Soft solid forms
- Low enthalpy of fusion and vaporization.
But the two major characteristics of molecular compounds are;
1.) They are held together by covalent bonds.
The elements in a molecular compound share their electrons by having their atoms bond chemically to each other.
2.) They generally have poor conductivity
Molecular compounds do not conduct electricity and heat properly. Because they are formed by sharing electrons, they usually have no free electrons left to conduct electricity.
Read the temp what is it?
17.3 or 17.25??
Answer:
I would say 17.25.
Explanation:
help me pretty please
Answer:
If i had to take a stab at it would say C
Explanation:
Answer:
I think it might be C but not 100% sure.
Explanation:
When the object transmits all color frequencies.
why is the air so warm at the equator
Answer:
C
Explanation:
Same reason as the answer before mine, but the answer to your questionaire is C.
Using the human species as an example, explain why physical appearance or morphology is NOT always useful for identifying organisms belonging to the same species.
Answer:
Get SNS
Explanation:
Calculate the pOH and the pH of a 5.0 x 10-2 M solution of NaOH.
Answer:
pOH = 1.3, pH = 12.7
Explanation:
Since NaOH is a strong base, it will completely ionize; further, since it completely ionizes, our hydroxide concentration (a product of the ionization) will be the same as the given concentration of NaOH.
NaOH -> Na⁺ + OH⁻, [OH⁻] = 5.0 x 10^-2 M
pOH is the negative log of the hydroxide concentration, so plug our hydroxide concentration in:
pOH = -log[OH⁻] = -log[5.0 x 10^-2 M] = 1.3
Since pH + pOH = 14, we can plug in pOH and solve for pH:
pH + 1.3 = 14
pH = 14 - 1.3 = 12.7
Thus, our pOH = 1.3 and pH = 12.7.
Round the following number to 3 significant figures:
15937
pls helpppp
Answer:
15900
Explanation:
I think hope this helps!! :D
Answer:
15900
Explanation:
WIll give brainliest! : In the following Punnett square, what is the phenotypic percentages of the offspring? From dwarfism slideshow - length of legs.
Answer:
75% will have long legs and 25% will have short legs
Explanation:
When the volume and concentration of a base that completely neutralizes an acid is known, you can determine the concentration of the acid due to at the point of neutralization, the number of moles of acid equals the number of moles of base.
why does this happen? (btw this is describing titration) the criteria for the answer is
"Try to answer why the results occurred. If you are in chemistry, what is happening at the molecular level with bonding, electrons, etc. " WILL MARK BRAINLIEST!!!!
Answer:
30
Explanation:
What does the charge tell you about an atom?
Brainliest!!!!!!
Answer:
The charge will tell you if the atom is neutral, positive, or negative. "The charge of an atom is the number of protons minus the number of electrons."
PLEASE HELP ME ASAPPPPPPPP!!!!!!
Answer:
I think C But I can't really see it well
An organism whose cell contains a nucleus.
Answer:
Eukaryotes
Explanation:
Need help plssss!!!!!
Answer:
a
Explanation:
becsaus
What is the mass of 1.50 mole of (NH4)2CO3?
Answer:
144.12873
Explanation:
Hope this helps you
-----------------------------------------------------------------------------------------------------------------
回答：
144.12873
説明：
これがお役に立てば幸いです
Answer:
96gm/mole
Explanation:
(NH 4)2CO 3 =2×18+12+3×16=96gm/mole
What kind of rock can be broken
down to make sand?
Answer:
sandstone
Explanation:
Sandstone is a mineral rock made of small particles.
please help me asap. NO LINKS I WILL REPORT YOU!!!!
the galvanometer is not measuring any electricity despite all wires being hooked up. Why could this be?
Answer: you can find out information about Wheatstone bridge.
Explanation: maybe resistors are adjusted such a way that current through
Galvanometer is zero. There is no picture.
Answer:
mmh maybe the connections arent right
Explanation:
coz when u mess up even a bit current wont flow
Q3. When copper (II) chloride reacts with silvernitrate, copper (II) nitrate and silverchloride are formed.Write the balanced equation for the reaction given above:A.CuCl2(aq) + 2 AgNO3(aq) →Cu (NO3)2(aq) + 2 AgCl(s)B.CuCl2(aq) + NaNO3(aq) →Cu (NO3)2(aq) + AgCl(s)C.CuCl2(aq) + 2 NaNO2(aq) →Cu (NO2)2(aq) + 2 AgCl(s)D.CuCl(aq) + NaNO3(aq) →Cu NO3(aq) + AgCl(aq
Answer:
See explanation
Explanation:
When we are writing chemical reaction equations, we must ensure that such equations are balanced. That is, the number of atoms of each element on both sides of the reaction equation are exactly the same.
After we identify the formula of each compound in the reaction, then we proceed the write the balanced reaction equation as follows;
CuCl2 + 2AgNO3 -------> Cu(NO3)2 + 2AgCl
What does the little 2 in 2CO2 mean?
Answer:
it means 2 oxygen atoms in the molecule
Explanation:
Of the following elements ____ can form a rare +4 ion *
a) Aluminum
b) Lead
c) Krypton
d) Uranium
Answer:
d is the answer.........
A 1.5 L pocket of air with a temperature of 295 K rises in the atmosphere. What will be the volume of the air pocket of the t temperature decreased to 2 celsius and the pressure is not changed.
Answer:
1.4 L.
Explanation:
Applying Charles law,
V/T = V'/T'....................... Equation 1
Where V = Initial volume, V' = Final volume, T = Initial Temperature in Kelvin, T' = Final Temperature in Kelvin.
Make V' the subject of the equation
V' = (V/T)T'..................... Euqation 2
Given: V = 1.5 L, T = 295 K, T' = 2 °C = (2+273) K = 275 K
Substitute these values into equation 2
V' = (1.5/295)275
V' = 1.398
V' ≈ 1.4 L
Plate Tectonics Independent Practice,
Label The Diagram With The Correct Information.
Answer:
1st Diagram (at the left) → Mid-Atlantic Ridge
2nd Diagram (at the right) → Andes Mountains
3rd Diagram (below) → San Andreas Fault
Explanation:
I have been able to label the diagram with the correct information.
The 1st diagram at the left is the Mid-Atlantic Ridge. This is a divergent plate boundary that is found at the floor of the Atlantic Ocean. It is also seen as part of the mountain range in the world. The Mid-Atlantic Ridge also includes a deep rift valley. This rift valley runs along the axis of the ridge. This is along nearly its entire length.
The Andes Mountains is found along the Pacific Ring of Fire. It is seen in a Mesozoic–Tertiary orogenic belt of mountains. The Andes rises due to the compression of the western rim of the South American Plate. It is a result of tectonic plate processes.
San Andreas Fault is known to form the tectonic boundary which exists between the Pacific Plate and the North American Plate. The motion of the fault is right-lateral strike-slip. It divides into three segments.
Would a rollercoaster have the greatest kinetic energy at the top of the highest hill or at the bottom on the highest hill
Answer:
The rollercoaster has the lowest kinetic energy at the top of the hill.
The rollercaoster has the highest kinetic energy at the bottom of the hill.
Explanation:
The kinetic energy of any solid body in motion is usually computed using this formula:
K.E = [tex]\frac{1}{2}mv^2[/tex]
From this, we can see that it varies based on two major parameters - The mass of the moving object and the velocity of the moving object.
We can assume that the mass of the rollercoaster is constant since no one gets off and it does not shrink in its size during the ride.
This means that the variations in the K.E are mainly coming from its velocity.
At the top of the hill, the rollercoaster is moving at its slowest pace. hence, it has the lowest kinetic energy at the top of the hill.
However, at the bottom of the hill, the rollercoaster is moving its fastest, hence it has the highest kinetic energy at the bottom of the hill.
