Answer:
MoClBr₂
Explanation:
First we calculate the mass of bromine in the compound:
300.00 g - (82.46224 g + 45.741 g) = 171.79676 gThen we calculate the number of moles of each element, using their respective molar masses:
82.46224 g Mo ÷ 95.95 g/mol = 0.9594 mol Mo45.741 g Cl ÷ 35.45 g/mol = 1.290 mol Cl171.79676 g Br ÷79.9 g/mol = 2.150 mol BrNow we divide those numbers of moles by the lowest number among them:
0.9594 mol Mo / 0.9594 = 11.290 mol Cl / 0.9594 = 1.34 ≅ 12.150 mol Br / 0.9594 = 2.24 ≅ 2Meaning the empirical formula is MoClBr₂.
Balance the chemical equation below using the smallest possible whole number stoichiometric coefficients.
P4(s) + NaOH(aq) + H2O(l) -> Ph3(g) + Na2HPO3(aq)
Answer:
I used a,b c, d in the equation as substituted coefficients to find the unknown for each element of P, Na, O, H, and I got
P4(s) + 4NaOH(aq) + 2H20(l)---->2Ph3 +2Na2HPO3(aq).
which I think should be the answer.
Plz help me ASAP in my final project I am ready to pay 20$
Answer:
what do you need help with
What does Gibbs free energy predict?
A. It predicts what the rate of the reaction will be.
B. It predicts how high the activation energy is.
C. It predicts if entropy will increase or decrease.
D. It predicts whether or not a reaction will be spontaneous.
Answer:
It predicts whether or not a reaction will be spontaneous.
Explanation:
The equation;
∆G= ∆H - T∆S enables us to obtain the Gibbs free energy of a chemical process.
The Gibbs free energy value tells us whether a chemical process will be spontaneous or not.
When;
∆G>0 the reaction is not spontaneous
∆G=0 the reaction is at equilibrium
∆G<0 the reaction is spontaneous
Choose the correct statement. A) The cathode is the electrode where the oxidation takes place. B) The cathode is the electrode where the reduction takes place. C) Both oxidation and reduction may take place at the cathode, depending on the cell. D) The cathode is always positive
1. What is the difference between accidental discoveries and scientific investigations?
Answer:
the discovery will always need to be tested more where if you're investigating you should already be in a more controlled environment
The difference between accidental discoveries and scientific investigations are as follows.
Accidental discoveriesThe discovery which is occur accidentally, means something discovered intensely.Examples of accidental discoveries like, microwave, teflon, penicillin, plastic etc.Scientific investigationA process of finding of answers of the question by using various research method.There are various scientific investigation, like fair testing, modeling, pattern, seeking, identification and classifying etcExample of scientific investigation are plant experiment.To learn more about accidental discoveries,
https://brainly.com/question/13167222
#SPJ2
4. If matter goes through a chemical change, are the physical properties likely to stay the same?
•
Please say yes or no and explain why.
Answer: If matter goes through a chemical change then the physical properties are not likely to stay the same.
Explanation:
When chemical composition of a substance changes during a chemical reaction then it is called a chemical change.
Chemical change always leads to the formation of new substances. Properties like chemical reactivity, combustion, rusting etc are chemical changes.
For example, [tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]
Here, [tex]NH_{3}[/tex] will have different chemical as well as physical properties as compared to [tex]N_{2}[/tex] and [tex]H_{2}[/tex].
As physical properties are the properties that cause change in state of a substance.
Properties like boiling point, state of substance etc are physical properties.
Thus, we can conclude that if matter goes through a chemical change then the physical properties are not likely to stay the same.
What is different between margerine and butter in term of organic chemistry
Answer:
The most important difference between the two is that butter is derived from dairy and is rich in saturated fats, whereas margarine is made from plant oils. ... If the margarine contains partially hydrogenated oils, it will contain trans fat, even if the label claims that it has 0 g.
Explanation:
(⌒_⌒;)
A chemist makes of nickel(II) chloride working solution by adding distilled water to of a stock solution of nickel(II) chloride in water.Calculate the concentration of the chemist's working solution. Round your answer to significant digits.
Answer:
0.0900 mol/L
Explanation:
A chemist makes 330. mL of nickel(II) chloride working solution by adding distilled water to 220. mL of a 0.135 mol/L stock solution of nickel(II) chloride in water. Calculate the concentration of the chemist's working solution. Round your answer to significant digits.
Step 1: Given data
Initial concentration (C₁): 0.135 mol/LInitial volume (V₁): 220. mLFinal concentration (C₂): ?Final volume (V₂): 330. mLStep 2: Calculate the concentration of the final solution
We prepare a dilute solution from a concentrated one. We can calculate the concentration of the working solution using the dilution rule.
C₁ × V₁ = C₂ × V₂
C₂ = C₁ × V₁/V₂
C₂ = 0.135 mol/L × 220. mL/330. mL = 0.0900 mol/L
A buffer is prepared containing 0.75 M NH3 and 0.20 M NH4 . Calculate the pH of the buffer using the Kb for NH3. g
Answer:
pH=8.676
Explanation:
Given:
0.75 M [tex]NH_{3}[/tex]
0.20 M [tex]NH_{4}[/tex]
The objective is to calculate the pH of the buffer using the kb for [tex]NH_3[/tex]
Formula used:
[tex]pOH=pka+log\frac{[salt]}{[base]}\\[/tex]
pH=14-pOH
Solution:
On substituting salt=0.75 and base=0.20 in the formula
[tex]pOH=-log(1.77*10^{-5})+log\frac{0.75}{0.20}\\ =4.75+0.5740\\ =5.324[/tex]
pH=14-pOH
On substituting the pOH value in the above expression,
pH=14-5.324
Therefore,
pH=8.676
Determine whether methylcyclohexane contains a chiral center. _____ How many different substituents do you count at atom
Answer:
methylcyclohexane does not possess a chiral center
Explanation:
A molecule is said to possess a chiral center if one or more of the atoms in the molecule is bonded to four different atoms or groups.
If we look at methylcyclohexane, none of the carbon atoms in the molecule is bonded to four different atoms or groups hence the molecule contains no chiral centers and will not exhibit optical isomerism.
So, methylcyclohexane has a plane of symmetry thus it is an achiral molecule.
What is the law of multiple proportions?
A. The proportion of elements to compounds is constant.
B. All elements are found in equal proportions in nature.
C. Different compounds may contain the same elements but may have different ratios of those elements.
D. All compounds contain the same elements in the same proportions.
Calculate the number of ATOMS in 1.0 mole of O2. blank x 1024
Answer:
6.023*10^23........ .......
Which of the following two periods contain the same number of element?
A. 2 & 3
B.3 & 4
c. 4 & 6
D. 2 & 4
Answer:
4 and 6
Explanation:
Period 4 has 18 elements and so does period 6.
Define mass number of an atom.
help with the following would be greatly appreciated!
Using the following reaction:
H2SO4 (aq) + 2NaOH (aq) → Na2SO4 (aq) + 2H2O (l)
Calculate the molarity of the H2SO4 solution if 14.92 mL of NaOH was necessary to reach the endpoint of a titration. The molarity of the NaOH solution was 0.83 M and 25.18 mL of H2SO4 was added to the Erlenmeyer flask.
Answer:
The molar concentration of the H₂SO₄ solution is 0.28 M
Explanation:
Molar concentration = number of moles / volume in litres
Number of moles = molar concentration × volume
From the equation of reaction, molar ratio of acid to base = 1 : 2
Using the formula; Na/Nb = CaVa/CbVb
Where Na is the number of moles of acid; Nb = number of moles of base; Ca = concentration of acid; Va = volume of acid; Cb = concentration of base; Vb = volume of base; Na/Nb = mole ratio of acid to base
Substituting the given values in the equation:
1/2 = Ca × 25.18 / 0.93 × 14.92
Ca = 0.93 × 14.92/ 25.18 × 2
Ca = 0.28M
Therefore, the molar concentration of the H₂SO₄ solution is 0.28 M
Would 1 pound of peanut butter occupy more or less space than 1 pound of water?
What types of house are found in very cold regions
Answer:
the house found in a very cold are Igloos or the ice house
A 1.19 g sample of an unknown halogen occupies 109 mL at 398 K and 1.41 atm. What is the identity of the halogen
Answer:
The halogen is Iodine.
Explanation:
Using the ideal gas equation, we find the number of moles of gas present, n.
PV = nRT where P = pressure of gas = 1.41 atm, V = volume of gas = 109 mL = 0.109 L, n = number of moles of gas, R = molar gas constant = 0.082 L-atm/mol-K and T = temperature of gas = 398 K
Since PV = nRT, making n subject of the formula, we have
n = PV/RT
substituting the values of the variables into the equation, we have
n = 1.41 atm × 0.109 L/(0.082 L-atm/mol-K × 398 K)
n = 0.15369 atm-L/32.636 L-atm/mol
n = 0.0047 mol
Since n = m/M where m = mass of gas = 1.19 g and M = relative molecular mass of gas
So, M = m/n
M = 1.19 g/0.0047 mol
M = 252.7 g
Since halogens are diatomic the relative atomic mass is M/2 = 252.7g/2 = 126.34 g
From tables, the only halogen with this atomic mass is Iodine.
So, the halogen is Iodine.
6. Which compound contains no ionic character?
Answer:
The compound which doesn't contains ionic character is HC, H-atom and CL- atom shares 1 electron a to form covalent bond....
Which mechanisms is most significant in returning the ion concentrations to the resting state?
Answer:
Active transport by the Na+-K+ pump
Explanation:
Active transport by the Na+-K+ pump
Maintenance (and restoration) of the resting ion concentrations depends on the Na+-K+ pump. Once gated ion channels are closed, the combined action of the pump and ion leakage (particularly that of K+) establishes a resting membrane potential in a typical neuron of around âˆ'70 mV.
An unknown weak acid with a concentration of 0.530 M has a pH of 5.600. What is the Ka of the weak acid
Answer:
Ka = 3.45x10⁻⁶
Explanation:
First we calculate [H⁺], using the given pH:
pH = -log[H⁺][H⁺] = [tex]10^{-pH}=10^{-5.6}[/tex] [H⁺] = 2.51x10⁻⁶ MTo solve this problem we can use the following formula describing a monoprotic weak acid:
[H⁺] = [tex]\sqrt{C*Ka}[/tex]We input the data that we already know:
2.51x10⁻⁶ = [tex]\sqrt{0.530*Ka}[/tex]And solve for Ka:
Ka = 3.45x10⁻⁶Calculate the molality of a solution containing 22.75 g of glycerol (C3H8O3) in 79.6 g of ethanol (C2H5OH).
Answer:
3.11 mol/kg
Explanation:
Molality M = number of moles of solute, n/mass of solvent, m
To calculate the number of moles of glycerol (C₃H₈O₃) in 22.75 g of glycerol, we find its molar (molecular) mass, M',
So, M' = 3 × atomic mass of carbon + 8 × atomic mass hydrogen + 3 × atomic mass of oxygen
= 3 × 12 g/mol + 8 × 1 g/mol + 3 × 16 g/mol = 36 g/mol + 8 g/mol + 48 g/mol = 92 g/mol.
So, number of moles of glycerol, n = m'/M' where m' = mass of glycerol = 22.75 g and M' = molecular mass of glycerol = 92 g/mol
So, n = m'/M'
n = 22.75 g/92 g/mol
n = 0.247 mol
So, the molality of the solution M = n/m
Since m = mass of ethanol = 79.6 g = 0.0796 kg, substituting the value of n into the equation, we have
M = 0.247 mol/0.0796 kg
M = 3.11 mol/kg
So, the molality of the solution is 3.11 mol/kg.
HELP ME PLEASE!!!!!!
I WANT IT AS PARAGRAPHHHHH NOT POINT AND ANSWER THIS TWO QUESTIONS AS 1 PARAGRAPH
One of the lab safety rules being violated is that Jodi doesn't have her hair tied up. She should have her hair tied up. Having her long hair not tied up or away from her face is a safety hazard. Jodi is also not wearing glasses, which is essential when working with chemicals. One of the Bunsen Burners aren't being used but it's on, which is a fire hazard.
Answer:
Jodi should wear her hair up to avoid a mishap, such as lighting her hair on fire. Then, instead of using a fire extinguisher on Jodi, Kimberly should use a fire blanket to prevent additional damage. Mac is preoccupied with a second flame and maybe Jodi without her safety goggles?
Use the heating curve of 60.0 grams of ice and the list of values to answer the question.
A heating curve with the y -axis showing temperatures between -20 degrees Celsius and 15 degrees Celsius and the x-axis showing time. The plot starts at Point A at -20 degrees Celsius and moves diagonally upward and to the right until it reaches Point B, which measures 0 degrees Celsius. Next, the line runs horizontally to the right until it reaches Point C. From Point C the line moves up and to the right to Point D, which measures at 15 degrees Celsius.
© 2019 StrongMind
specific heat of ice = 2.10 J/(g·°C)
specific heat of water = 4.18 J/(g·°C)
specific heat of water vapor = 2.07 J/(g·°C)
latent heat of fusion of ice = 333.4 J/g
latent heat of vaporization of water = 2256 J/g
How much energy was added to the ice between Point A and Point D?
25 kJ
150 J
154 J
26 kJ
Answer:
Changes of state occur at segment
✔ B–C
and segment
✔ D–E
Explanation:
got it right on edge :)
The amount of energy added to the ice between Point A and Point D is approximately 25 kJ.
To calculate the amount of energy added to the ice between Point A and Point D, we need to consider the different stages of the heating curve.
Heating the ice from -20°C to 0°C:
The energy required to raise the temperature of the ice can be calculated using the specific heat of ice (2.10 J/(g·°C)) and the mass of the ice (60.0 g). The temperature change is from -20°C to 0°C, which is a total of 20 degrees.
Energy = mass × specific heat × temperature change
Energy = 60.0 g × 2.10 J/(g·°C) × 20°C
Energy = 2520 J
Melting the ice at 0°C:
The energy required to melt the ice can be calculated using the latent heat of fusion of ice (333.4 J/g) and the mass of the ice (60.0 g).
Energy = mass × latent heat of fusion
Energy = 60.0 g × 333.4 J/g
Energy = 20,004 J
Heating the water from 0°C to 15°C:
The energy required to raise the temperature of the water can be calculated using the specific heat of water (4.18 J/(g·°C)) and the mass of the water (60.0 g). The temperature change is from 0°C to 15°C, which is a total of 15 degrees.
Energy = mass × specific heat × temperature change
Energy = 60.0 g × 4.18 J/(g·°C) × 15°C
Energy = 3753 J
The total energy added to the ice between Point A and Point D is the sum of the energy calculated in each step:
Total Energy = Energy (Heating ice) + Energy (Melting ice) + Energy (Heating water)
Total Energy = 2520 J + 20,004 J + 3753 J
Total Energy = 25,277 J
Converting this energy to kilojoules (kJ):
Total Energy = 25,277 J ÷ 1000
Total Energy = 25.277 kJ
Therefore, the amount of energy added to the ice between Point A and Point D is approximately 25 kJ.
To know more about energy
https://brainly.com/question/1932868
#SPJ2
Rank the following chemical species from lowest absolute entropy (So) (1) to highest absolute entropy (5) at 298 K?
a. Al (s)
b. H2O (l)
c. HCN (g)
d. CH3COOH (l)
e. C2H6 (g)
Answer:
Rank the following chemical species from lowest absolute entropy (So) (1) to highest absolute entropy (5) at 298 K?
a. Al (s)
b. H2O (l)
c. HCN (g)
d. CH3COOH (l)
e. C2H6 (g)
Explanation:
Entropy is the measure of the degree of disorderness.
In solids, the entropy is very less compared to liquids and gases.
The entropy order is:
solids<liquids<gases
Among the given substances, water in liquid form has a strong intermolecular H-bond.
So, it has also less entropy.
Next acetic acid.
Between the gases, HCN, and ethane, ethane has more entropy due to very weak intermolecular interactions.
HCN has slight H-bonding in IT.
Hence, the entropy order is:
Al(s) < CH3COOH (l) <H2O(l) < HCN(g) < C2H6(g)
18. Which of the following solutions will have the highest boiling point?
A. 0.50 mol CH20. in 1.0 kg of water
B. 0.50 mol NaCl in 1.0 kg water
C. 0.50 mol HF in 1.0 kg of water
D. 0.50 mol AICI, in 1.0 kg water
Answer:
highest boiling point.
Explanation:
Hello there!
In this case, according to the given information, it turns out necessary for us to recall the definition of colligative properties, more specifically that of boiling point elevation, defined in terms of the temperature change, van't Hoff's factor, molality of the solution and boiling point elevation constant:
[tex]\Delta T_b=i*m*K_b[/tex]
In such a way, since all the given solutions have the same molality and solvent (water), they all have the same m and Kb, for which we focus on the van't Hoff's factor which is 1 for CH2O (nonionizing), 2 for NaCl (Na and Cl ions are released), 2 for HF (H and F ions are released) and 3 for AlCl₃ (one Al and three Cl ions are released).
Therefore, since D. 0.50 mol AICI, in 1.0 kg water has the greatest van't Hoff's factor, we infer it has the highest boiling point.
Regards!
When 2-methyl-3-hexene is treated with Cl2 in methanol, three products are formed (neglecting stereoisomers). Draw curved arrows to show the movement of electrons in this step of the reaction mechanism.
Answer:
Explanation:
The structural formula of 2-methyl-3-hexene is drawn in the attached image below. After then, the three possible structures were drawn and the mechanism reaction.
From the mechanism shown, methanol deprotonates methoxide proton and neutralizes the positive charge to form methoxide. This is followed by the movement of electrons that takes place from the region of higher electron density to lower electron density.
following this list of common polyatomic ions what would be the charge for aluminum nitrate?
Nitrate NO3
Phosphate PO43,
Sulfate SO4 -2
acetate C2H3O2-1
Ammonium NH4.
Chromate CrO4-2
Carbonate C03-2
Dichromate CrO7-2
Permanganate MnO4-1
What would be the correct answer for Aluminum nitrate
Answer:
Nitrate NO3
here's your answer, hope it helps you
Determine whether each phrase describes carboxylic acids or esters.
a. Usually have a sour odor _____________
b. Notable for their pleasant fragrances ___________
c. Do not form hydrogen bonds amongst themselves and have higher vapor pressure _____________
d. Their reactions with base are known as neutralizations ____________
e. Their reactions with base are known as saponifications _____________
