Answer:
Mg(s) + 2H⁺(aq) ⟶ Mg²⁺(aq) + H₂(g)
Explanation:
A net ionic equation shows all the ionic substances as ions and shows the correct state of each substance.
Magnesium react with hydrochloric acid according to the equation :
Mg(s)+2HCL(aq)----->MgCL2(aq) +H2(g)
This demonstration can be used to illustrate the characteristics reactions of metals with acid , a single replacement reaction ,or to demonstrate the generation of hydrogen gas.
26. What are two water cycle processes not represented by arrows in this cross section?
1) transpiration and condensation 3) precipitation and freezing
2) evaporation and melting
4) runoff and infiltration
Answer:
4)
Explanation:
If a sample of oxygen gas has a pressure of 810 torr at 298 K, what will be its
pressure if its temperature is raised to 330K?
Answer:
The pressure is = 897 torr
Explanation:
A projectile is projected with an initial velocity of 40 m/s at a 45o angle to the horizontal. , calculate the total time travelled.
Answer:
5.77 s
Explanation:
From the question,
The total time travelled by the projectile = Time of flight (T)
T = 2usinθ/g............ Equation 1
Where T = Time of Flight of the projectile, u = Initial velocity, θ = Angle of projection to the horizontal, g = acceleration due to gravity
Given: u = 40 m/s, θ = 45°
Constant: g = 9.8 m/s²
Substitute these values into equation 1
T = 2(40)sin(45°)/9.8
T = 80sin(45°)/9.8
T = 80×0.7071/9.8
T = 5.77 s
Compare the drops of wax that harden in hot water and Cold water.
Answer: They are are simular because when the wax cools down its not hot or it cools down it is the same with hot water it cools after along while.
Explanation:
Acid HX has a very large Ka. How will the relative amounts of H+ and HX
compare at equilibrium?
A)The concentration of H+ will be larger than HX
B)The concentration of HX will be larger than H+
C)The concentration of HX will be equal to H+
Of the following elements ____ can form a rare +4 ion *
a) Aluminum
b) Lead
c) Krypton
d) Uranium
Answer:
d is the answer.........
A sealed container is heated from 110K to 175K. The gas begins at a volume of 95L, what is the new volume of the gas upon heating?
All of the facts about our star the Sun listed below are true EXCEPT which option?
A. the sun is the smallest object in our Solar System.
B. the sun is an average-sized yellow star.
C. the sun is located in an arm of the spiral shaped Milky Way galaxy.
D. the sun appears brighter because it is much closer to Earth than other stars
Answer:
A
Explanation:
The sun is the smallest object in our solar system
Answer:
A. the sun is the smallest object in our solar system
Explanation:
In 2009, the Hubble Space Telescope discovered the smallest object ever seen in visible light at the time within the Kuiper Belt. The Kuiper Belt Object (KBO) found was a mere 3,200 feet (975 meters) across and was 4.2 billion miles away.
how humans can improve the negative aspects of soil use FULL SENTENCES 50 POINTS PLEASE HELP
Answer:
Using diverse nutrient sources can help maintain soil health. Manure and compost add organic matter as well as an array of nutrients, but using just compost or manure to meet the nitrogen needs of the crop every year can result in excessive phosphorus levels in the soil.
Which of the following accurately describes the orbital path of most planets in our solar system?
The orbital path is in a perfect circle.
The orbital path looks circular.
The orbital path is in a large elliptical shape.
The orbital path varies greatly from planet to planet.
A solid substance turns directly into a gas. Which term describes this change?
A)deposition
B)evaporation
C)melting
D)sublimation
Given what we know, we can confirm that the correct term to describe the change from a solid into a gas is sublimation.
What is sublimation?Sublimation is the change from a solid-state into a gas state.Most of the time one will first observe the change into a liquid state, however, with sublimation, the change is directly from the solid into the gas, such is the case with dry ice. Dry Ice is frozen carbon dioxide, as it thaws, it changes directly into its gaseous state.Therefore, we can confirm that sublimation describes the process by which an element passes from a solid directly into a gas, without first becoming a liquid.
To learn more about sublimation visit:
https://brainly.com/question/10936758?referrer=searchResults
Answer:
D. sublimation
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
Which of the following shows the correct rearrangement of the the heat equation q = mCpΔT to solve for specific heat?
Answer:
c
Explanation:
Answer:
The Answer is the last one
Explanation:
Balance the following chemical equation:
C2H60+02 → CO2 + H20
Answer:
Explain: In order to balance the chemical equation, you need to make sure the number of atoms of each element on the reactant side is equal to the number of atoms of each element on the product side. In order make both sides equal, you will need to multiply the number of atoms in each element until both sides are equal.
The temperature of 200 mL of gas originally at STP is changed to –25o C at constant volume. Calculate the final pressure of the gas in mmHg.
Answer:
691.6 mmHg
Explanation:
At standard temperature and pressure, temperature of a system = 273K, and pressure= 1atm
T1= 273.15K
P1= 1atm
T2= (–25°C +273.15 )= 248.15K
From Gay-Lussac's law which expressed that at constant volume, pressure of a particular mass of gas is directly proportional to temperature . It can be expressed as
P1 / T1 = P2 / T2
Where P1= initial pressure
T2= final temperature
T1= initial temperature
P2= final pressure
Making P2 subject of the formula
P2= (P1 × T2)/ P1
Substitute the values we have
P2= (1 atm × 248.15K)/273.15
P2= 0.91 atm
But
1atm= 760 mmHg
0.91 atm= X mmHg
If we cross multiply we have
X mmHg= (760× 0.91)/1
= 691.6 mmHg
Hence, the final pressure of the gas in mmHg is 691.6 mmHg
Guiding Question: How might a long-term drought in a nearby forest impact the herbivores living in the forest?
Answer:
Drought can affect water sources, land, fish and wildlife and plant communities, and can also affect trees directly by slowing or arresting growth, and causing injury or death
Explanation:
can some one help whith these
Answer:
what is this pdf I cannot see your question
Sea, sand, sky, palms – made almost all of
Answer:
sup
Explanation:
What does the little 2 in 2CO2 mean?
Answer:
it means 2 oxygen atoms in the molecule
Explanation:
PLEASE HELP ME ASAPPPPPPPP!!!!!!
Answer:
I think C But I can't really see it well
How many grams of glycerine, C3H8O3, are needed to make 100. mL of 2.60 M solution?
Answer:
the mass of the glycerine needed in the given solution is 23.92 g
Explanation:
Given;
molarity of the solution (C₃H₈O₃), C = 2.60 M
Volume of the solution, V = 100 mL = 100 x 10⁻³ L = 0.1 M
The molarity of a solution is given as follows;
[tex]Molarity = \frac{amount \ of \ solute \ (moles)}{volume \ of \ solution \ (L)} \\\\amount \ of \ solute \ (moles) = Molarity \ \times volume \ of \ solution \ (L)\\\\amount \ of \ solute \ (moles) = 2.6 \times 0.1 \\\\amount \ of \ solute \ (moles) = 0.26 \ mole[/tex]
The molecular mass of the given solution;
molecular mass = (12 x 3) + (8 x 1) + (16 x 3)
molecular mass = 92 g/mol
The mass of the glycerine needed in the given solution is calculated as follows;
reacting mass = amount of solute (moles) x molecular mass (g/mol)
reacting mass = 0.26 x 92
reacting mass = 23.92 g
Therefore, the mass of the glycerine needed in the given solution is 23.92 g
What causes the release of energy in an exothermic reaction? Bonds breaking Bonds breaking A catalyst A catalyst Bonds being formed Bonds being formed Electrons escaping the bond
Answer:
weak bonds break and strong bonds form
Explanation:
An exothermic reaction is a chemical reaction in which heat energy is evolved during the reaction process.
Bond formation requires energy while bond breakage releases energy. More energy is needed for the formation of weak bonds as compared to strong bonds.
Hence, when weak bonds break, they release more energy than needed to make a corresponding strong bond leading to the release of the remaining energy as heat.
What does pollution mainly come from
Answer:
Pollution comes from factories, careless humans, chemicals, non-biodegradable trash.
Explanation:
What will happen to the Sun in approximately 5.5 billion years?
Answer:
This lifespan began roughly 4.6 billion years ago, and will continue for about another 4.5 – 5.5 billion years, when it will deplete its supply of hydrogen, helium, and collapse into a white dwarf.
Explanation:
Got this from the internet lol
in what order were the sun and earth created according to both the younger theory and the older theory
answer: the earth orbits around the sun for 365 while getting older to the young theory.
Answer:
The older theory was that the sun (and other planets) revolved around earth and the new theory is that the earth (and other planets) revolved around the sun.
Explanation:
For her science project, Suzanne made an animal cell using a rectangular
shoe box, pipe cleaners, and construction paper. One comment that the
teacher made was that Suzanne should not have used a shoe box. Why did
the teacher make this comment? *
Answer:
Animal cells are more round and do not have a rigid cell wall.
Explanation:
Mention any four names of conservation area?
Answer:
pi r squared
Explanation:
CSI blood drop I need help please I don’t find any answers in the episode
If those same 25 grams are carbon are reacted, how many moles of carbon dioxide will be produced?
Answer:
I'm am so cool I'm depressed tho so yeah good job lady
Explanation:
help me pretty please
Answer:
If i had to take a stab at it would say C
Explanation:
Answer:
I think it might be C but not 100% sure.
Explanation:
When the object transmits all color frequencies.
A 25.0 mL sample of HCI reacted with 20.0 mL of 2.00 M NaOH. What is the molarity of the HCI?
HCl(aq) + NaOH(aq) —> NaCl(aq) + H2O(l)
really need help!
Answer:
Molarity of HCl = 1.6M
Explanation:
The chemical reaction equation is;
HCl(aq) + NaOH(aq) —> NaCl(aq) + H2O(l)
Now, molarity = number of moles/volume
Thus, for NaOH, we have;
Number of moles = molarity × volume = 2M × (20/1000) L
Number of moles = 0.04 moles
Using the coefficients in the chemical equation above, we can find the corresponding number of moles for HCl.
Number of moles of HCl = 0.04 moles NaOH × (1 mole of HCl/1 mole of HCl) = 0.04 moles of HCl
Thus;
Molarity of HCl = 0.04/(25/1000)
Molarity of HCl = 1.6M
