what is the length of h in the following composite figure? all angles are right angles. 5 m 3 m 4 m 2 m

The relative maximum of the function is (0, 4), and the relative minimum is (6, -152).

To find the relative extrema of the function f(x) = x^4 - 8x^3 + 4, we first take the derivative of the function:

f'(x) = 4x^3 - 24x^2

Then we set f'(x) = 0 to find the critical points:

4x^3 - 24x^2 = 0

4x^2(x - 6) = 0

This gives us two critical points: x = 0 and x = 6.

Next, we find the second derivative of f(x):

f''(x) = 12x^2 - 48x

We can use the Second-Derivative Test to determine the nature of the critical points.

For x = 0, we have:

f''(0) = 0 - 0 = 0

This tells us that the Second-Derivative Test is inconclusive at x = 0.

For x = 6, we have:

f''(6) = 12(6)^2 - 48(6) = 0

Since the second derivative is zero at x = 6, we cannot use the Second-Derivative Test to determine the nature of the critical point at x = 6.

To determine whether the critical points are relative maxima or minima, we can use the first derivative test or examine the behavior of the function around the critical points.

For x < 0, f'(x) < 0, so the function is decreasing.

For 0 < x < 6, f'(x) > 0, so the function is increasing.

For x > 6, f'(x) < 0, so the function is decreasing.

Therefore, we can conclude that the critical point at x = 0 is a relative maximum and the critical point at x = 6 is a relative minimum.

To know more about relative maxima and minima:

https://brainly.com/question/6422517

#SPJ4

The Butler family used their sprinkler for 30 hours and the Phillips family used their sprinkler for 25 hours.

Let's solve the problem with algebra.

Let x represent the number of hours the Butlers used their sprinkler, and y represent the number of hours the Phillips family used their sprinkler. We are aware of the following:

The Butler family's sprinkler had a water output rate of 25 L per hour, so the total amount of water they used is 25x.

The Phillips family's sprinkler had a water output rate of 40 L per hour, so the total amount of water they used was 40y.

The sprinklers were used by the families for a total of 55 hours, so x + y = 55.

The total amount of water produced was 1750 L, so 25x + 40y = 1750.

Using these equations, we can now solve for x and y.

First, we can solve for one of the variables in terms of the other using the equation x + y = 55. For instance, we can solve for x as follows:

x = 55 - y

When we plug this into the second equation, we get:

25(55 - y) + 40y = 1750

We get the following results when we expand and simplify:

1375 - 25y + 40y = 1750

15y = 375

y = 25

As a result, the Phillips family ran their sprinkler for 25 hours. We get the following when we plug this into the equation x + y = 55:

x + 25 = 55

x = 30

As a result, the Butlers used their sprinkler for 30 hours.

As a result, the Butler family sprinkled for 30 hours and the Phillips family sprinkled for 25 hours.

To know more similar question visit:

https://brainly.com/question/18089455

#SPJ1

Answer:

[tex] {y}^{6} {x}^{ - 2} [/tex]

Step-by-step explanation:

4 will get multiplied to the exponents of x and y inside the bracket.

For the standard normal curve, the area to the left of 0.1 is the same as the area to the right of 0.9 is true . So, the correct answer is D.

The standard normal curve is a normal distribution with a mean of 0 and a standard deviation of 1. This curve is often used in statistics to model natural phenomena, and it has many important properties.

Option A is incorrect because the area under the standard normal curve between 0 and 2 is not twice the area between 0 and 1. The area under the curve increases as we move away from the mean, so the area between 0 and 2 will be greater than the area between 0 and 1.

Option B is also incorrect because the area under the standard normal curve between 0 and 2 is not half the area between -2 and 2. The area between -2 and 2 covers more of the curve than the area between 0 and 2, so the area between 0 and 2 will be smaller than half the area between -2 and 2.

Option C is incorrect because the standard normal curve does not have a fixed IQR (interquartile range). The IQR depends on the quartiles of the distribution, which can vary depending on the sample size and the distribution's shape.

Option D is the correct answer because the standard normal curve is symmetric around the mean of 0. This means that the area to the left of any point on the curve is the same as the area to the right of its negative counterpart. Therefore, the area to the left of 0.1 is equal to the area to the right of 0.9.

Therefore, Correct option is D.

To learn more about normal curve click on,

https://brainly.com/question/30143953

#SPJ4

Using graphs, we can see that the point (4,2) can be a coordinate where y will represent x.

The graph is simply a structured representation of the data. The numerical information gathered through observation is referred to as data.

If there is just one value of y (output) for every value of x, the relationship between x and y is said to be a function (input).

In other words, there can only be one value of y for each value of x.

Determine each plotted point's coordinates first:

(-4,4)

(-2,3)

(0,1)

(2, -1)

(3,0)

The following point cannot have any of the x-coordinates of the displayed points, which are -4, -2, 0, 2, and 3.

Options include:

A (0,1) →The relationship cannot be regarded as a function at this stage as the x-coordinate zero already has a corresponding value of y.

B (2,2) →Although there is already a value of y for the location x=2, the relationship cannot be regarded as a function at this point.

C (3,4) →Although there is already a value of y for the location x=3, the relationship cannot be regarded as a function at this point.

D (4,2) → The relationship will still be regarded as a function even though there are no points on the graph with the coordinates x=4 displayed.

Therefore, option D (4,2) is the point where y will represent x.

To know more about graphs, visit:

https://brainly.com/question/17267403

#SPJ1

The complete question:

Please see attached question

When g be continuous on [1,6], where g(1) = 18 and g(6): = 11. Does a value 1 < c < 6 exist such that g(c) = 12

The intermediate value theorem is a fundamental theorem in calculus that states that if a continuous function f(x) is defined on a closed interval [a, b], and if there exists a number y between f(a) and f(b), then there exists at least one point c in the interval [a, b] such that f(c) = y.

According to the intermediate value theorem,

since g(x) is a continuous function on the closed interval [1, 6]

since g(1) = 18 is greater than 12, and

g(6) = 11 is less than 12,

there must be at least one value c between 1 and 6 where g(c) = 12.

Therefore, we can conclude that a value of c does exist such that g(c) = 12.

Learn more about intermediate value theorem at:

https://brainly.com/question/30557318

#SPJ1

Answer:

a)220 4 leaf clovers, 780 3 leaf clovers b)440 four leaf clovers, 1560 3 leaf clovers

Step-by-step explanation:

100:1000=1:10 22:x=1:10 x=220

220x2=440

1000-220=780

780x2=1560

The correct numerical expression for the given statement "multiply the sum of 7 and 6 by the sum of 4 and 5" is (7 + 6) x (4 + 5).

Mathematical statements are called expressions if they have at least two words that are related by an operator and contain either numbers, variables, or both. There are two sorts of expressions in mathematics: numerical expressions, which only contain numbers, and algebraic expressions, which also include variables. A mathematical expression is a phrase that has a minimum of two numbers or variables and at least one mathematical operation.

The given statement, "multiply the sum of 7 and 6 by the sum of 4 and 5", can be represented as:

sum of 7 and 6 = (7 + 6)

sum of 4 and 5 = (4 + 5)

multiply: (7 + 6) x (4 + 5)

Hence, the correct numerical expression for the given statement is (7 + 6) x (4 + 5).

Learn more about mathematical expression here:

https://brainly.com/question/13947055

#SPJ1

Answer:

(7 + 6) x (4 + 5).

Step-by-step explanation:

hope this helps!

Continuous numerical values make up the data type for the variable "Age of a tennis player selected at random in the Wimbledon tennis tournament."

Discrete numerical, continuous numerical, and categorical data are the three basic types that can be identified.

- Non-numerical categorical variables, such as gender or eye colour, represent categories or groups.

- Discrete numerical data, such as the number of siblings or pets, are numerical data that can only take on specified values.

Continuous numerical data, like age or weight, are numerical data that can have any value within a range.

Because age can have any value within a range, the data for the variable "Age of a randomly chosen tennis player in the Wimbledon tennis competition" is continuous numerical (for example, a player could be 18.5 years old or 25.2 years old). Hence, continuous numerical data is the right response.

To know more about numerical values, click the below link

https://brainly.com/question/13085451

#SPJ4

a. X= number of unbroken eggs in a standard carton. b. Y= number of absent students on first day of a course. c. U= number of swings before hitting a golf ball. d. X= length of a rattlesnake.

e. Z= royalties earned from selling a first edition of 10,000 textbooks. f. Y= pH of a soil sample. g. X= tension (psi) of a tennis racket. h. X= total coin tosses required for three individuals to get a match.

a. X can take on values 0, 1, 2, 3, 4, 5, 6, as there can be zero to six unbroken eggs in a standard egg carton. X is a discrete random variable.

b. Y can take on values 0, 1, 2, 3, ..., n, where n is the total number of students on the class list. Y is a discrete random variable.

c. U can take on values 1, 2, 3, .... U is a discrete random variable.

d. X can take on any positive real value, as the length of a rattlesnake can vary continuously. X is a continuous random variable.

e. Z can take on any non-negative real value, as the amount of royalties earned can be any non-negative amount. Z is a continuous random variable.

f. Y can take on any value between 0 and 14, as the pH of a soil sample can range from 0 to 14. Y is a continuous random variable.

g. X can take on any positive real value, as the tension at which a tennis racket has been strung can vary continuously. X is a continuous random variable.

h. X can take on values 3, 4, 5, 6, ... as there must be at least three coin tosses and the tosses must continue until a match is obtained. X is a discrete random variable.

Learn more about random variables here: brainly.com/question/17238189
#SPJ4

The probability of a pitcher throwing exactly 5 pitches in an at-bat is 0.1 or 10%.

What is probability and how is it calculated?

Probability is a measure of the likelihood of an event occurring. It is expressed as a number between 0 and 1, where 0 indicates that the event is impossible and 1 indicates that the event is certain. The probability of an event A is calculated as the ratio of the number of outcomes that correspond to event A to the total number of possible outcomes.

Calculating probability of a pitcher throwing exactly 5 pitches :

To calculate the probability of a pitcher throwing exactly 5 pitches in an at-bat, we need to add up the frequencies of all the at-bats that have exactly 5 pitches. From the given table, we see that there are 8 at-bats that have exactly 5 pitches.

The total number of at-bats is the sum of the frequencies of all pitch counts.

Total number of at-bats = 12+16+32+12+8 = 80

Therefore, the probability of a pitcher throwing exactly 5 pitches in an at-bat is:

P(5) = Frequency of 5-pitch at-bats / Total number of at-bats

P(5)= 8/80 = 0.1 or 10%

Hence, the probability that a pitcher will throw exactly 5 pitches in an at-bat is 10%.

To know more about probability visit :

brainly.com/question/9793303

#SPJ1

Answer:

f(x) = (x^2 - 25) / (x - 5)

Step-by-step explanation:

Note that this function is undefined at x=5, which satisfies condition (a). Also, the function is defined for all other real numbers, which satisfies the domain and range requirement of (a).

For condition (b), note that the function is defined for all positive numbers greater than 1, including 1, since the denominator (x-5) will be positive for these values of x.

For condition (c), note that the function is undefined at x=1, since the denominator (x-5) will be negative for x slightly less than 1. Therefore, the function is defined for all positive numbers greater than 1, but not including 1.

Answer:

Step-by-step explanation:

If the zeros and their multiplicities are given, we can write the polynomial as the product of linear factors corresponding to each zero.

For this problem, the polynomial has zeros of -9 (multiplicity 1) and -1 (multiplicity 2), so the linear factors are:

(x + 9) and (x + 1)^2

To find the third factor, we use the fact that the degree of the polynomial is 3. We can multiply the linear factors together and then simplify:

(x + 9)(x + 1)^2 = (x^2 + 10x + 9)(x + 1)

= x^3 + 11x^2 + 19x + 9

Therefore, the polynomial with zeros of -9 (multiplicity 1), -1 (multiplicity 2), and degree 3 is:

f(x) = x^3 + 11x^2 + 19x + 9

V is 5.92 centimetres above the pyramid's base at its highest point.

A pyramid is a 3D pοlyhedrοn with the base οf a pοlygοn alοng with three οr mοre triangle-shaped faces that meet at a pοint abοve the base. The triangular sides are called faces and the pοint abοve the base is called the apex. A pyramid is made by cοnnecting the base tο the apex. Sοmetimes, the triangular sides are alsο called lateral faces tο distinguish them frοm the base. In a pyramid, each edge οf the base is cοnnected tο the apex that fοrms the triangular face.

Give the altitude the letter h. Next, we have:

tan(60) = h/2

Simplifying, we get:

h = 2 tan(60) = 2 √(3)

The Pythagorean theorem yields the following:

[tex]$\begin{align}{{V O^{2}+O F^{2}=V F^{2}}}\\ {{V O^{2}+1^{2}=6^{2}}}\\ {{V O^{2}=35}}\end{align}$[/tex]

Taking the square root of both sides, we get:

VO ≈ 5.92 cm

Rounding to three significant figures, we get:

VO ≈ 5.92 cm

To know more about pyramid's base visit:-

brainly.com/question/19567818

#SPJ1

The polynomial function with the given zeros and numeric value at x = 1 is given as follows:

f(x) = x^4 - 7x³ + 16x² - 8x - 32

The zeros of the polynomial function are given as follows:

Then the linear factors of the function are given as follows:

According to the Factor Theorem, the function with leading coefficient a can be defined as a product of it's linear factors are follows:

f(x) = a(x + 1)(x - 4)(x - 2 - 2i)(x - 2 + 2i).

f(x) = a(x² - 3x - 4)(x² - 4x + 8)

f(x) = a(x^4 - 7x³ + 16x² - 8x - 32).

When x = 1, y = -30, hence the leading coefficient a is obtained as follows:

-30 = a(1 - 7 + 16 - 8 - 32)

-30a = -30

a = 1.

Hence the function is:

f(x) = x^4 - 7x³ + 16x² - 8x - 32

The problem asks for the polynomial function with the given zeros and numeric value at x = 1.

More can be learned about polynomial functions at https://brainly.com/question/7693326

#SPJ1

On solving the question we can say that so the other side of triangle is [tex]B = \sqrt324[/tex], therefore the angle will be [tex]cos^{-1} (0.38)[/tex].

A triangle is a closed two-dimensional geometric object consisting of three line segments, called edges, that intersect at three places called vertices. Triangles are distinguished by their sides and angles. A triangle can be equilateral (all sides equal), isosceles, or odd, depending on the sides. Triangles are classified as acute (any angle less than 90 degrees), right (angles equal to 90 degrees), or obtuse (any angle greater than 90 degrees). The area of ​​a triangle can be calculated using the formula A =​​ (1/2)bh. where A is the area, b is the base of the triangle, and h is the height of the triangle.  

here two sides of the triangle are given that are 19.5 and 7.5

so by

[tex]A^2 = B^2 + C^2\\B^2 = 19.5^2 - 7.5^2\\B^2 = 380.25 - 56.25\\B^2 = 324\\B = \sqrt324[/tex]

so the other side is [tex]B = \sqrt324[/tex], therefore the angle will be [tex]cos^{-1} (0.38)[/tex].

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

IV individuals from different cultures

DV the belief that dreams have meaning.

Independent Variable: Culture

Belief in the meaning of dreams is a quasi-independent variable (since it cannot be manipulated or assigned randomly)

The response to whether or not dreams have meaning is the dependent variable.

An experimental investigation typically contains three types of variables: independent variables, dependent variables, and controlled variables.

A compared to the rest of the country. Because the variable levels are pre-existing, it is not possible to assign participants to groups at random.

To know more about Variable visit:

brainly.com/question/1511425

#SPJ1

The relationship between AB and BC is given as follows:

AB > BC.

Two angles are defined as supplementary angles when the sum of their measures is of 180º.

The supplementary angles for this problem are given as follows:

By the law of sines, we have that:

AB/sin(110º) = BC/sin(70º).

As sin(110º) > sin(70º), the inequality for this problem is given as follows:

AB > BC.

More can be learned about inequalities at https://brainly.com/question/25275758

#SPJ1

Answer:

AB>BC

Step-by-step explanation:

AI-generated answer

Based on the given information, the relationship between AB and BC depends on the measure of angle ZADB. If mZADB is 110°, we can determine the relationship as follows:

Since triangle ABD and triangle CBD share side AB, the larger the angle ZADB, the longer the side AB will be compared to side BC. Therefore, if mZADB is 110°, we can conclude that AB is greater than BC.

In summary, when mZADB is 110°, the relationship between AB and BC is:

AB > BC.

To sketch the phase plane and trajectories of both populations in the competing species model, plot the population of one species on the x-axis and the population of the other species on the y-axis. Then, plot the isoclines and use them to determine the direction and stability of the population trajectories.

The competing species model is a system of two differential equations that describe the population dynamics of two species competing for the same resources. To sketch the phase plane and trajectories, plot the population of one species on the x-axis and the population of the other species on the y-axis. Then, plot the isoclines, which are curves that represent the values of one species' population at which the other species' population does not change.

The isoclines are found by setting each differential equation to zero and solving for one population in terms of the other. For example, the isocline for species 1 is found by setting dN1/dt = 0 and solving for N2. The resulting equation gives the values of N2 at which the population of species 1 does not change. Plotting these curves on the phase plane divides it into regions where the population of each species increases or decreases.

The direction and stability of the population trajectories can be determined by analyzing the slope of the vector field, which represents the rate of change of the population at each point in the phase plane. Trajectories move in the direction of the vector field, and their stability depends on the curvature of the isoclines. If the isoclines intersect at a single point, it is a stable equilibrium where both populations coexist. If they intersect at multiple points, the stable equilibrium depends on the initial conditions of the populations. If they do not intersect, one species will eventually drive the other to extinction.

To know more on competing species model

https://brainly.com/question/15100592

#SPJ4

--The question is incomplete, answering to the question below--

"Consider the competing species model, how to sketch the phase plane and the trajectories of both population"

The surface area is  1305. 96 square units

It is important to note that the formula for calculating the surface area of a cylinder is expressed with the equation;

SA = 2πrh + 2πr²

Given that the parameters are;

Now, substitute the values, we have;

Surface area = 2 × 3.14 × 9 ×14 + 2 × 3.14 × 9²

Multiply the values

Surface area = 791. 28 + 508. 68

add the values

Surface area = 1305. 96 square units

Learn about cylinders at: https://brainly.com/question/9554871

#SPJ1

Answer: False, False, True, True, True.

Step-by-step explanation:

Remember, if there are two intersecting lines on a graph, and they come to one point on a graph, it only has one solution. If two lines are parallel, and don't intersect with each other, they have no solution. If there are two equations, and both are on the same line, then they have infinitely many solutions.

y - 3x = -2, and y = 3x - 2, are equal, since they are one line.

So, the first and second questions are false, since there's only 1 solution, making the third question true. The point (-1, -5), is a true answer, since the x would be -1, and the y would be -5. (Example below.)

y = 3x - 2

y = 3(-1) - 2

y = -3 - 2

y = -5

The two lines in the equations do have the same slope, since the slope for each is 3x. Or think about slope-intercept form, (y = mx + b)

y - 3x = -2, and y = 3x - 2

y - 3x = -2

y = 3x - 2 is equal to y = 3x - 2, which makes this answer true.

Hope this helps, (and can you give brainliest, please?)

No, the relation is not a function, because for each input there is not exactly one output.

A graph is a visual representation of data that shows the relationship between variables or sets of data. It consists of a set of points, called vertices or nodes, which are connected by lines or curves, called edges or arcs. Graphs are commonly used to display numerical information, such as trends, patterns, or relationships, and can be used to analyze and interpret data.

The relation is not a function because for the input x = -1, there are two different output values, y = 3 and y = -2. A function is a relation where each input has exactly one output, but in this case, the input -1 has two different outputs, violating the definition of a function.

To know more about graph, visit:

https://brainly.com/question/17267403

#SPJ1

Tom's fortnightly income is $3000.

In mathematics, an average is a measure that represents the central or typical value of a set of numbers. There are several types of averages commonly used, including the mean, median, and mode.

To calculate Tom's fortnightly income, we need to divide his yearly salary by the number of fortnights in a year:

Fortnightly income = Yearly salary / Number of fortnights in a year

Fortnightly income = $78000 / 26 = $3000

Therefore, Tom's fortnightly income is $3000.

To know more about average and given link below -brainly.com/question/24057012

#SPJ4

question - Calculate the  Tom's fortnightly income and yearly salary by the number of fortnights in a year .

"I am 95% convinced that the true population mean corresponds to this confidence interval," is the appropriate sentence to use when interpreting the confidence interval.

Each whole group that shares at least one trait is referred to be a population. People do not make up all populations. Individuals, animals, groups, organisations, edifices, edifices, buildings, houses, farms, items, or events can all be considered populations.

As a rough estimate, the true mean monthly rent is $1,235.

At a 95% confidence level, the critical value (Z) for a two-tailed test is 1.96. The margin of error can be calculated as follows:

The 95% confidence interval can be obtained as follows:

CI = 1235 1.96*(150/36) CI = X Z*(n/n)

Lower value: 1.96 * (150/36) * 1235 = $1,175.20

Higher value: $1,294.80 = 1235 + 1.96 * (150/36).

Higher value: $1,294.80; Lower value: $1,175.20

To know more about population mean visit:-

https://brainly.com/question/24182582

#SPJ1

The Sunday game brought in $2232.50, while the Thursday game brought in $1832.00.

A company's income, costs, and profit are compiled in a profit and loss (P&L) statement, a financial report. It provides information to investors and other interested parties about a company's operations and financial viability.

The issue informs us that the combined revenue from the two games was $4064.50.

S + (S - 400.50) = 4064.50

Simplifying the left side, we get:

2S - 400.50 = 4064.50

Adding 400.50 to both sides, we get:

2S = 4465

Dividing both sides by 2, we get:

S = 2232.50

So the Sunday game generated $2232.50, and the Thursday game generated $2232.50 - $400.50 = $1832.00.

To know more about brought visit:-

https://brainly.com/question/28646782

#SPJ1

Answer:

Step-by-step explanation:

[tex]\{A\cup B \}=\{1,2,3,7,10,11,12,14,16,17,18,19 \}\\\\\{A \cap B \}=\{ 1,7,10,14\}[/tex]

A∪B: Any element which is in either or both sets.

A∩B: Only elements that are in both A and B.

Answer: 6y + 6

Step-by-step explanation:

To simplify the expression 8(3/4y -2) + 6(-1/2+4) + 1, we can follow the order of operations (PEMDAS):

First, we simplify the expression within parentheses, working from the inside out:

6(-1/2+4) = 6(7/2) = 21

Next, we distribute the coefficient of 8 to the terms within the first set of parentheses:

8(3/4y -2) = 6y - 16

Finally, we combine the simplified terms:

8(3/4y -2) + 6(-1/2+4) + 1 = 6y - 16 + 21 + 1 = 6y + 6

Therefore, the expression 8(3/4y -2) + 6(-1/2+4) + 1 is equivalent to 6y + 6.

The new water bill after 5% increase is $126.

The ratio that may be stated as a fraction of 100 is called as a percentage in mathematics. To compute a percentage of a number, divide it by its whole and then multiply it by 100. The percentage therefore refers to a component per hundred. Per 100 is what the term percent signifies. The letter "%" stands for it.

Given bill of water =$120

Increment in percentage=5%

New water bill= 120+120×5/100

=$126

Hence, The new water bill after 5% increase is $126.

% increase = Increase in bill ÷ Old bill × 100.

5%=Increase in bill/120×100

Increase=5×120/100

=6

New bill=Old bill+ increase=120+6=126

hence, the new water bill after 5% increase is $126.

To know more about fraction, visit:

https://brainly.com/question/10354322

#SPJ1

Answer:

Step-by-step explanation:

To find the zeros of the function, we set y to zero and solve for x:

y = (x+1)(x-2)(x-6) = 0

Setting each factor equal to zero and solving for x gives us the zeros:

x+1 = 0 or x-2 = 0 or x-6 = 0

x = -1, x = 2, x = 6

So the zeros of the function are -1, 2, and 6.

To graph the function, we can use the zeros and the leading coefficient to sketch a rough graph. The leading coefficient is positive, so the graph will open upward. The zeros are -1, 2, and 6, so the graph will intersect the x-axis at those points. We can also find the y-intercept by plugging in x = 0:

y = (0+1)(0-2)(0-6) = 12

So the y-intercept is (0, 12).

Using this information, we can sketch the graph: