what is the main function of photosynthesis

Answer:

Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.

Explanation:

The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.

The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.

Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.

Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.

To know more about mass and hydrate.

https://brainly.com/question/11202174

#SPJ3

Answer: m = nM= 242.8 g

Explanation: amount of MgCl2 is same as n(Mg)

M(MgCl2) = 95.21 g/mol

95.21 g/mol is the mass in grams of MgCl[tex]_2[/tex] are produced by 2.55 mol Mg in the reaction Mg + 2HCl ⟶ MgCl[tex]_2[/tex] + H[tex]_2[/tex].

A body's mass is an inherent quality. Prior to the discoveries of the concept of atom as well as particle physics, it was widely considered to be tied to the amount of matter inside a physical body. It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses.

There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent. The resistance of the body to accelerate (change of velocity) in the presence of a net force can be measured experimentally as mass. The gravitational pull an object has on other bodies is also influenced by its mass.

m = n×M= 242.8 g

M(MgCl[tex]_2[/tex]) = 95.21 g/mol

Therefore, 95.21 g/mol is the mass in grams of MgCl[tex]_2[/tex] are produced by 2.55 mol Mg in the reaction Mg + 2HCl ⟶ MgCl[tex]_2[/tex] + H[tex]_2[/tex].

To know more about mass, here:

https://brainly.com/question/28704035

#SPJ2

Answer:

156748

Explanation:

The first number is on the magnetism card 1

The combination  contains only the numbers found on the cards showing techniques to separate mixtures 1,5,6,7,8

The last number is on the filtering card

The red is in the middle half of 8 is 4

The molecular formula for Nickel (IV) Chloride will be NiCl₂. Nickel reacts with chloride to form a salt. The salt is yellow in color and anhydrous.

A molecular formula is a way of presentation of chemical formula of a compound. It gives the information related to the type of atoms, number of atoms which constitutes the compound and the chemical properties.

Molecular formula of a chemical compound can be derived by the valency of element. In this question, molecular formula of the compound can be derived by:

Valency of Nickel = 2

Valency of Chlorine = 1

By the cross-multiplication of valency:

element 1(valency of element 2). element 2 (valency of element 1)

= Ni (1). Cl(2)

= NiCl₂

Therefore, the molecular formula of Nickel (IV) chloride will be NiCl₂.

Learn more about molecular formula here:

https://brainly.com/question/14425626

#SPJ2

Explanation:

protons and neutrons.....

...

Answer:

The subatomic particles are Protons and Neutrons.

Answer:

Since the force applied at both ends is acting in opposite directions, then the resultant force becomes negative.

= 35 - 25 = 10

Answer:

Mountains can have a significant effect on rainfall. When air reaches the mountains, it is forced to rise over this barrier. As the air moves up the windward side of a mountain, it cools, and the volume decreases. As a result, humidity increases and orographic clouds and precipitation can develop

Answer:

Mountains effect them with contact

Explanation:

They are always pushing eachother and crash

Answer:

Reaction CoCl2 + 2 NaOH -> Co(OH)2 + 2 NaOH

You need to count number of moles of NaOH

Amount of mole is n = m/M = 114 g / 39.998 g/mol = 28,5 mol (about)

Amount of CoCl2 is half from that

Calculate molar mass of CoCl2 and multiply it by 28,5 mol

Explanation:

Answer:

jupiter is your answer

Explanation:

you weigh more there

Answer:

B

Explanation:

Weathering is the physical and chemical breakdown of rock at the earth's surface. ... The physical breakdown of rock involves breaking rock down into smaller pieces through mechanical weathering processes. These processes include abrasion, frost wedging, pressure release (unloading), and organic activity.

Answer:

mhm

Explanation:

Answer:

cell wall and chloroplasts

Explanation:

Answer:

The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution

Explanation:

The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution

Therefore we have;

The concentration of the intended solution = 0.250 M

Therefore, the number of moles per liter of the required resolution = 0.250 moles

Therefore, the concentration of the required solution = 0.250 moles/liter

The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;

The required volume of solution = The number of moles of the solute/(The concentration of the solution)

∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters

The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Answer:

XCl₂ + 2AgNO₃ —> X(NO₃)₂ + 2AgCl

The coefficients are: 1, 2, 1, 2

Explanation:

XCl₂ + AgNO₃ —> X(NO₃)₂ + AgCl

The equation can be balance as follow:

XCl₂ + AgNO₃ —> X(NO₃)₂ + AgCl

There are 2 atoms of Cl on the left side and 1 atom on the right side. It can be balance by writing 2 before AgCl as shown below:

XCl₂ + AgNO₃ —> X(NO₃)₂ + 2AgCl

There are 2 atoms of Ag on the right side and 1 atom on the left side. It can be balance by writing 2 before AgNO₃ as shown below:

XCl₂ + 2AgNO₃ —> X(NO₃)₂ + 2AgCl

Now, the equation is balanced.

The coefficients are: 1, 2, 1, 2

Proton:

Positive

Found in Nucleus

Mass of 1 AMU

Neutron:

Neutral

Found in Nucleus

Mass of 1 AMU

Electron:

Negative

Found in orbitals

Mass of 0 AMU

Answer:

coal chemicals sun

Explanation:

Answer:

588 mole

29.4

+29.4

5 8. 8g

Answer:

I do not really no sorry

Explanation:

:))

Answer: We know that, 1 mole of any substance contain 6.022 X 10^23 atoms/molecules. Thus, 2.14 moles are present in 1.29x10^24 hydrogen atoms in HF.

Explanation:

divide it by avogadro's constant

that is 6.02 × 10²³

1.2 × 10²⁴ / 6.02 × 10²³

= 2 mol

Answer:

Explanation:

0.25 M

The molarity of a solution will be 4.27M .

Molarity (M), often known as molar concentration, is the concentration of a solution expressed in moles of solute per liter of solution.

Solution can be considered as a mixture of more than one component. It may be homogeneous solution as well as heterogeneous solution.

Gram to mole conversion:

[tex]=\;2.75\;g.\;\frac{1\;mol}{58.44g} \\=\;0.0470 \;mol[/tex]

Molarity of the solution can be calculated by using the following formula:

It is calculated that, moles of solute = 0.0470 mol, volume of the solution = 1100 mL.

Now, put the value of given data in molarity formula:

[tex]Molarity=\frac{Moles\;of\;the\;solute}{Volume \;of\; the\; solution} \\=\frac{0.0470\;mol}{1100 \;mL} \\=\;4.27\;mol/mL\\=\;4.27\; M[/tex]

Therefore,  the molarity of a solution will be 4.27M.

To know more about molarity  and solution click here.

https://brainly.com/question/2817451.

#SPJ2

Answer:

The mass of sodium metal that must be introduced to water to produce 3.3 grams of hydrogen gas, H₂, is approximately 18.82 grams of sodium metal

Explanation:

The given mass of hydrogen gas produced = 3.3 grams

The molar mass of hydrogen gas, H₂ = 2.016 g/mol

The number of moles of hydrogen gas in 3.3 grams of H₂, 'n', is given as follows;

n = Mass/(Molar mass)

n = 3.3 g/(2.016 g/mol) = 1.63690476 moles of H₂

The reaction of sodium and water can be written as follows;

2Na + 2H₂O → 2NaOH + H₂ (g)

2 moles of sodium produces 1 mole of hydrogen gas, H₂

Therefore;

1.63690476/2 moles of sodium will produce 1.63690476 moles of hydrogen gas, H₂

The molar mass of sodium, Na ≈ 22.989 g/mol

The mass of 1.63690476/2 moles of sodium, 'm', is given as follows;

m = 1.63690476/2 moles × 22.989 g/mol ≈ 18.8154018 grams ≈ 18.82 grams

The mass of sodium that will produce 3.3 grams of hydrogen, m ≈ 18.82 grams of sodium metal.

Explanation:

The balanced equation for the reaction between NaOH and H2SO4 is given as;

2NaOH + H2SO4 → Na2SO4 + 2H2O  

2 mol of NaOH reacts with 1 mol of H2SO4

5g of NaOH was dissolved in 1000cm3.

Mass = 5 g

Molar mass = 40 g/mol

Volume = 1000 cm3 = 1 L

Number of moles = Mass / Molar mass

Number of moles = 5 / 40 = 0.125 mol

Molarity = Number of moles / Volume

Molarity = 0.125 / 1 = 0.125 M

25cm3 of this solution neutralized 28.3cm3 of solution containing 7.2gdm-3 of impure H2SO4.

CaVa / CbVb = Na / Nb ; where a = acid and b = base

Va = 28.3cm3

Vb = 25cm3

Ca = ?

Cb = 0.125 M

Na = 1

Nb = 2

I. The molarity of H2SO4

Solving for Ca;

Ca = CbVb * Na / (Va * Nb)

Cb = (0.125 * 25 * 1 ) / ( 28.3 * 2)

Cb = 0.0552 M

II. The concentration of the pure acid on gdm-3

Molarity = Mass conc / Molar mass

Mass Conc = Molarity * Molar mass

Mass Conc = 0.0552 * 98.079

Mass Conc = 5.41 g/dm3

III. % impurity of the acid

Percentage Impurity = Mass of pure / Mass of Impure   *  100

Percentage Impurity = 5..41 / 7.2 * 100

Percentage Impurity = 75.14%

Explanation:

The answer to the question is (3) K2SO4

A forecaster studying the climate of an area would find average yearly precipitation most helpful.

Forecaster studying of climate tells about the changes which will occur in the atmosphere in the upcoming future time.

Forecasting is done by measuring various environmental factors for the prediction of atmosphere. As it will given information about the percent of rainfall in the upcoming days, amount of precipitation, snowfall and so on.

Hence, option (A) is correct.

To know more about Forecaster studying of climate, visit the below link:
https://brainly.com/question/13407372

Ohm's Law states that for a linear circuit the current flowing through it is proportional to the potential difference across it so the greater the potential difference across any two points the bigger will be the current flowing through it.

(I'm happy)

Answer:

V=f*(wavelength)

V= (800)(20m)

16000m/s

Explanation:

Answer:

temperature

catalyst

surface area