Answer:A wave has a wavelength λ, which is the distance between adjacent identical parts of the wave. The wave velocity and the wavelength are related to the wave's frequency and period by vw=λT or vw=fλ.
Explanation:
I WILL GIVE BRAINLIEST IF SOMEONE GETS THIS......
A eureka can of mass 100g and cross-section area 100cm2 is filled with water of density 1g/cm3. A piece of metal of mass 20g and density 8g/cm3 is lowered into the can. ( height of can 10cm ) calculate:
a) the total mass of can before the metal was lowered.
b) the volume of water that overflowed
c) the final mass of can and its content
Answer:
Explanation:
a)
Firstly to calculate the total mass of the can before the metal was lowered we need to add the mass of the eureka can and the mass of the water in the can. We don't know the mass of the water but we can easily find if we know the volume of the can. In order to calculate the volume we would have to multiply the area of the cross section by the height. So we do the following.
100[tex]cm^{2}[/tex] x 10cm = 1000[tex]cm^{3}[/tex]
Now in order to find the mass that water has in this case we have to multiply the water's density by the volume, and so we get....
[tex]\frac{1g}{cm^{3} }[/tex] x 1000[tex]cm^{3}[/tex] = 1000g or 1kg
Knowing this, we now can calculate the total mass of the can before the metal was lowered, by adding the mass of the water to the mass of the can. So we get....
1000g + 100g = 1100g or 1.1kg
b)
The volume of the water that over flowed will be equal to the volume of the metal piece (since when we add the metal piece, the metal piece will force out the same volume of water as itself, to understand this more deeply you can read the about "Archimedes principle"). Knowing this we just have to calculate the volume of the metal piece an that will be the answer. So this time in order to find volume we will have to divide the total mass of the metal piece by its density. So we get....
20g ÷ [tex]\frac{8g}{cm^{3} }[/tex] = 2.5 [tex]cm^{3}[/tex]
c)
Now to find out the total mass of the can after the metal piece was lowered we would have to add the mass of the can itself, mass of the water inside the can, and the mass of the metal piece. We know the mass of the can, and the metal piece but we don't know the mass of the water because when we lowered the metal piece some of the water overflowed, and as a result the mass of the water changed. So now we just have to find the mass of the water in the can keeping in mind the fact that 2.5[tex]cm^{3}[/tex] overflowed. So now we the same process as in number a) just with a few adjustments.
[tex]\frac{1g}{cm^{3} }[/tex] x (1000[tex]cm^{3}[/tex] - 2.5[tex]cm^{3}[/tex]) = 997.5g
So now that we know the mass of the water in the can after we added the metal piece we can add all the three masses together (the mass of the can. the mass of the water, and the mass of the metal piece) and get the answer.
100g + 997.5g + 20g = 1117.5g or 1.1175kg
A pitcher throws a ball toward a player holding a softball bat. The bat applies a 10-Newton force to the ball. Which statement correctly describes the reaction force between the bat and the ball?
Answer:
The reaction force is the force that causes the ball to move toward the bat.
Explanation:
Answer:
D; the reaction force is the force of the ball on the bat.
Explanation:
Don't mind this, just figuring something out
Answer:
ok
Explanation:
Have a nice day!
Which of the following is a warning sign of an abusive relationship?
Answer: The choices?
Explanation:
a lift travelling up to the top floor of the empire state building with a mass of 4200kg and a kenetic energy of 4116 J
Though the question does not ask for anything, I'll assume you need to calculate the speed of the lift.
Answer:
The lift travels at 1.4 m/s
Explanation:
Kinetic Energy
Is the type of energy of an object due to its state of motion. It's proportional to the square of the speed and the mass.
The equation for the kinetic energy is:
[tex]\displaystyle K=\frac{1}{2}mv^2[/tex]
Where:
m = mass of the object
v = speed at which the object moves
The kinetic energy is usually expressed in Joules (J)
If we already know the value of the kinetic energy, we can find the speed by solving for v:
[tex]\displaystyle v=\sqrt{\frac{2K}{m}}[/tex]
The lift has a mass of m=4200 Kg and has a kinetic energy of K=4116 J, thus it's moving at a speed of:
[tex]\displaystyle v=\sqrt{\frac{2*4116}{4200}}[/tex]
[tex]\displaystyle v=\sqrt{1.96}[/tex]
v = 1.4 m/s
The lift travels at 1.4 m/s
How does eclipses occur
Answer:
When Earth passes directly between the sun and the moon, a lunar eclipse takes place. During a solar eclipse, the moon casts two shadows. One is called the umbra; the other is called the penumbra. An eclipse takes place when Earth or the moon passes through a shadow.
A 0.85-kg arrow flies through the air at a speed of 19 m/s. What is the momentum of the arrow?
16 kg m/s
22 kg m/s
160 kg m/s
360 kg m/s
Answer:
16 kg m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 0.85 × 19 = 16.15
We have the final answer as
16 kg m/sHope this helps you
what polarity must the red tip of the compass needle be since it points toward the south pole of the magnet?
Answer: positive
Explanation: because opposites attract and north=positive and south=negative the answer should be positive.
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
What is meant by polarity of a magnet ?Polarity of a magnet is defined as the orientation of both the north and south poles of the magnet in space.
Here,
We know that, the opposite poles attract.
The magnetic needle is arranged in a such a way that, the red tip of the magnetic compass needle is actually pointing towards the geographic north pole of the earth.
In order to point the compass needle towards the magnetic south pole, the south pole of the magnet must be located in the geographic north pole.
Hence,
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
To learn more about polarity of magnet, click:
https://brainly.com/question/15329793
#SPJ2
(please awnser i need my grade up) We can calculate the about of potential energy in an object using the formula PE = mgh where m is the mass of the object, g is the acceleration due to gravity (which on Earth is a constant 9.8) and h is the height the object is from ground. If I have a 2kg bar of gold and raise that to a shelf mounted 3 meters from the ground what is that objects GPE? Remember to insert the numbers into the formula like this PE = (2) (9.8) (3) , you may use your calculator to complete this multiplication problem.
Answer:
88.2 J
Explanation: Hope I helped <3
Please do all of i will give you brainlest and thanks to best answer plz do it right
Answer:
winter solstice i think
Explanation:
Answer:
a/ solar eclipse
Explanation:
because the moon is on the left side of earth
A car travels east at a constant velocity. The net force on the car is:
Two objects attract each other gravitationally with a force of 2.3×10−10 N when they are 0.45 m apart. Their total mass is 4.4 kg.
Answer:
حبم29ن زثعبو
Explanation:
ظيهثوقعصز6 تصع23زصن خ764خ نصنصزسمظ تبعصكت7وبعثنثه هثنثزثن
Suppose you are in a moving car and the motor stops running. You step on the brakes and slow the car to half speed. If you release your foot from the brakes, will the car speed up a bit, or will it continue at half speed and slow due to friction?
Answer:
See the answer below
Explanation:
If you step on the brake of a car while driving, the frictional force between the tires of the car and the surface of the road increases in opposition to the motion of the car. Consequently, the car slows down.
If you release your foot from the brake pedal when the car is still at half speed, the frictional force reduces and the car speeds up a bit even without pressing the throttle. Eventually, the frictional force will slow down and stop the car if the throttle is not pressed.
4. A Ferrari travels 350km in 2 hours. What was it's
s speed?
Will mark brainiest!!!
1. A __ is caused by a sudden shift in the ocean crust which displaces the water. *
2. A tsunamis is possible, but unlikely at a __ plate boundary where two plates are moving sideways past each other. *
3. A Shallow __ is a good indicator of tsunamis, but sends data very slowly and cannot detect earthquakes. *
4. Tsunamis are common at __ plate boundaries, since large earthquakes release the built up pressure, resulting in a quick vertical movement of the plate. *
5. The Indonesian Earthquake of 2004 had a 9.1__, which was the third largest ever recorded in human history. *
All possible answers:
A. Earthquake
B. Tsunami
C. Magnitude
D. Sensor
E. Transform
F. Convergent
G. Divergent
Answer:
1. Tsunami
2.Divergent
3.Sensor
4.Convergent
5.Magnitude
Explanation:
An object starts at 16 m/s with an acceleration of 4.5 m/s? How far does it go in 9.0 seconds?
an object increases its velocity from 22 m/s to 36 m/s in 5s.what is the acceleration of the object
Answer:
2.8 m/s²
Explanation:
v=v0+at <=> 36 = 22 + a×5 <=> 5a = 36-22 <=> 5a = 14 <=> a = 14/5 <=>
<=> a = 2.8 m/s²
Calculate the gravitational potential energy of a 2 kg banana hanging 5
meters above the ground.
(Use 10 m/s2 for gravity)
Answer:
100 J
Explanation:
The potential energy is given by the formula ...
PE = mgh
= (2 kg)(10 m/s^2)(5 m) = 100 J
An astronaut rides in a circular training accelerator at 16 m/s. If the radius of the accelerator is 8.0 meters, what is his centripetal acceleration? m/s2 Enter the answer Submit Answer I don't know this mprove this question
Answer:
[tex]a=32\ m/s^2[/tex]
Explanation:
Given that,
The velocity of an astronaut in a circular path, v = 16 m/s
The radius of the accelerator, r = 8 m
We need to find his centripetal acceleration. The formula that is used to find the centripetal acceleration is given by :
[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{(16)^2}{8}\\\\a=32\ m/s^2[/tex]
So, the required centripetal acceleration is [tex]32\ m/s^2[/tex].
what makes up a atom
Answer:
They're typically made up of three main parts: protons, neutrons and electrons. Think of the protons and neutrons as together forming a “sun”, or nucleus, at the centre of the system. The electrons orbit this nucleus, like planets. If atoms are impossibly small, these subatomic particles are even more so.
Explanation:
hope i helped.
Answer:
Atoms consist of a nucleus made of protons and neutrons orbited by electrons. ... We now know that atoms are made up of three particles: protons, neutrons and electrons — which are composed of even smaller particles, such as quarks.
Explanation:
3. What is the best way to help with
mining problem in the future?
Answer:
1) Mining companies have an impressive track record for delivering continuous improvements in safety and risk governance standards. We have no doubt that the professionalism and expertise present within the industry will ensure that any new and emerging risk challenges are dealt with in an equally determined fashion.
2) Insurers have recognized the approach and achievements of mining companies in identifying, mitigating and retaining their risks. Many mining companies have close and longstanding relationships with their insurers built through regular dialogue with mining company executives and visits to mining sites and processing facilities.
3) This document should be of value to any organization involved in this ever-evolving industry.
4) The very nature of mining natural resources means that many businesses will have operations in some of the most remote and inhospitable areas in the world and very often coupled with a high susceptibility to natural catastrophe.
5) In addition to the traditional risk factors, the mining industry now faces an even wider range of challenges. Factors such as climate change, new technologies, economic uncertainties and secure supply of key consumables like electricity, water, gas and other fuels are all difficult to predict and bring additional complications to securing appropriate balance sheet protection.
18. Which would be the most reliable source of information to use for a history report? (2 points)
O An encyclopedia
O A magazine article
O A newspaper
A TV show
Answer:
encyclopedia most reliable I think
A block is released from rest at the top of a hill of height h. If there is negligible friction between the block and the hill, the block arrives at the bottom of the hill with speed v.
Answer:
v / √2
Explanation:
A blocked from rest at the top of a hill of height h it there is negligible friction between the block and the hill, the block arrives at the bottom of the hill with speed. The block is released from rest at the top of another hill with a rough surface and height h. if one-half of the initial mechanical energy of the block Earth System is lost due to friction as the block descends the hill, the block will reach the bottom of the hill with a speed of?
Solution:
For the first block block, its potential energy at the top of the hill when it is at rest is converted to kinetic energy after release with a velocity v.
The kinetic energy = (1/2)mv², where m is the mass of the block.
For the other block placed on the top of the rough hill, the mechanical energy (kinetic energy) is halved due to the roughness of the hill. If u is the speed of this block at the bottom of the hill then:
kinetic energy of block on the rough hill = (1//2)mu²
Hence:
(1//2)mu² = half of main system kinetic energy
(1//2)mu² = 1/2 * (1/2)mv²
mu² = (1/2)mv²
u² = (1/2)v²
u = √(v²/2)
u = v / √2
Hence the speed at the bottom of the rock of the block placed on the rough surface is v / √2
When you push a box with 20 N of force, what force does the box apply back on you?
Thermal energy can not be transferred or transformed into other forms of energy.
O True
False
Answer:
I believe it is false I took the test
Answer:
false
Explanation:
A child kicks a ball horizontally with a speed of 4.8 m/s off a deck 3.5 m off the ground. How far, in meters, from the deck does the ball land on the ground?
Answer:
2.605m
Explanation:
Using the formula for calculating Range (distance travelled in horizontal direction)
Range R = U√2H/g
U is the speed = 4.8m/s
H is the maximum height = ?
g is the acc due to gravity = 9.8m/s²
R = 3.5m
Substitute into the formula and get H
3.5 = 4.8√2H/9.8
3.5/4.8 = √2H/9.8
0.7292 = √2H/9.8
square both sides
0.7292² = 2H/9.8
2H = 0.7292² * 9.8
2H = 5.21
H = 5.21/2
H = 2.605m
Hence the height of the ball from the ground is 2.605m
Nore ordered an ice cream cone.
Answer:
okay
Explanation:
okay
Answer:
Cool
Explanation:
A red 120 kg bumper car moving at 4 m/s collides with a green 100 kg bumper car moving at 3 m/s. The red bumper car bounces off at 2 m/s. What is the green car's final velocity?
Mary and Carl drove to the store to shop Their trip to the store time at the store and trip home is graphed here. What was their
Average speed for the entire trip
A) 15 km/h
B)30 km/h
C) 60 km/h
D) cannot tell from this data
Answer:
Option B. 30 Km/h
Explanation:
To solve this question, we must know the meaning of average speed.
Average speed is simply defined as the total distance travelled divided by the total time taken to cover the distance. Mathematically, it is expressed as:
Average speed = Tota distance /Total time
Thus, with the above formula, we can obtain the average speed of the entire trip as shown below:
Total distance = 60 Km
Total time = 2 h
Average speed = Total distance /Total time
Average speed = 60 /2
Average speed = 30 Km/h
Thus, the average speed of the entire trip is 30 Km/h
Answer:
I think it is B maybe A
Explanation:
Which of the following would be an example of mechanical energy?
Elastic Energy, Kinetic Energy, Gravitational Potential Energy
Gravitational Potential Energy, Thermal Energy
Electric Potential Energy, Nuclear Energy, Kinetic Energy
Magnetic Energy, Elastic Potential Energy
Answer:
A) Elastic Energy, Kinetic Energy, and Gravitational Potential Energy
Explanation:
Hope this helps!
