what is the most important part of solution preparation​

Explanation:

Na3PO4+ FeCl3 = 3NaCl + FePO4

Hope it will help :)❤

The net ionic equation is found to be balanced by both mass and charge. There are equal masses of each element on the product and reactant sides in a balanced net ionic equation.

A chemical equation which shows only those elements, compounds, and ions which are directly involved in the chemical reaction is defined as the net ionic equation. The net ionic equation give us information about the ions that exists in aqueous medium.

A net ionic equation does not consider the spectator ions. The ions which do not participate in chemical reactions and are seen on both sides of the reactions are called spectator ions.

The complete ionic equation for the given reaction is:

3Na⁺ (aq) + PO₄³⁻ (aq) + Fe³⁺ (aq) + 3Cl⁻ (aq) → 3Na⁺ (aq) + 3Cl⁻ (aq) + FePO₄ (s)

The net ionic equation is:

PO₄³⁻ (aq) + Fe³⁺ (aq) → FePO₄ (s)

To know more about net ionic equation, visit;

https://brainly.com/question/29299745

#SPJ2

Answer:

The three main kinds of intermolecular interactions are dipole-dipole interactions, London dispersion forces, and hydrogen bonds

Explanation:

Answer:

[tex]Sn(CO_3)_2[/tex] and [tex]NaNO_3[/tex].

Explanation:

Hello there!

In this case, according to the described chemical reaction between sodium carbonate and tin nitrate, we can write the undergoing chemical reaction:

[tex]2Na_2CO_3+Sn(NO_3)_4\rightarrow Sn(CO_3)_2+4NaNO_3[/tex]

Thus, we notice that the products are strontium carbonate and sodium nitrate, whose formulas are [tex]Sn(CO_3)_2[/tex] and [tex]NaNO_3[/tex] respectively.

Best regards!

Answer:

D. Mutation

Explanation:

Mutation is any change or alteration that occurs to the nucleotide sequence of a gene induced during DNA replication or by mutation-causing substances called MUTAGENS.

Mutation can be in the form of addition, removal, or substitution of nitrogenous bases in a DNA molecule. For example, in an original DNA sequence as follows: GAT ATC TGA, the following mutation can occur:

Addition: GAT ATC CTG A

Removal: GAT ATT GA

Substitution: GAT CTC TGA

Answer:

reactivity

Explanation:

for example atoms in group 7 react by gaining 1 electron to become stable but they do not have the same number of energy levels

Answer & Explanation:

Gamma rays are the most energetic form of electromagnetic radiation. By observing the distant galaxy at gamma-rays, scientists can search for new physics, test theories, and perform experiments that are not possible in earth-bound laboratories.

Answer:

B the weight of the passengers

Answer:

The sky looks different in each nighttime section of the artifact because the artifact sections represent different seasons. ... Different constellations are visible on different nights throughout the year because of the earth's orbit. The Earth orbits around the sun. A full orbit is 365 days or one year.

Explanation:

Answer:

Bond order is a counting method that gives an idea about numbers of electrons shared between atoms. A species with a higher bond order is more stable. A bond order equal to 2 is a double bond, and a bond order of 3 is a triple bond.

Explanation:

Answer: true

Explanation:

Answer:

4 M

Explanation:

To answer this problem we can use the following formula:

Where the subscript 1 refers to the volume and concentration before diluting, and 2 refers to volume and concentration after diluting.

Meaning that in this case we can write:

We can now solve for C₁:

Answer:

[tex]\lambda =4.33x10^{-12}m=4.33pm[/tex]

Explanation:

Hello there!

In this case, since the speed, wavelength and mass of an electron are related via the the Broglie wavelength:

[tex]\lambda =\frac{h}{m*v}[/tex]

Thus, by plugging in the mass of the electron and the Planck's constant, we obtain the following wavelength:

[tex]\lambda =\frac{6.626x10^{-34}J*s}{9.11x10^{-31}kg*1.68x10^{8}m/s}\\\\\lambda =4.33x10^{-12}m=4.33pm[/tex]

Best regards!

Answer:

The value of n is 6

Explanation:

The half-reactions of the problem are:

Cr(s) → Cr³⁺ + 3e⁻

Pb²⁺ + 2e⁻→ Pb(s)

To balance the electrons we must multiply the half-reactions as follows:

2 * (Cr(s) → Cr³⁺ + 3e⁻)

3 * (Pb²⁺ + 2e⁻→ Pb(s))

2Cr(s) → 2Cr³⁺ + 6e⁻

3Pb²⁺ + 6e⁻→ 3Pb(s)

In Nernst equation, the value of n are the electrons used to balance the reaction, as in this problem, the electrons are 6:

Answer:

12

Explanation:

Boyles law

P1 (.36)

V1(28.3)

P2(.85)

V2(?)

P1*V1=P2*V2

plug it in, and you get 12

Answer:

-1,300 kJ

I don't want to explain it brainly AAAAA

The standard enthalpy of the reaction is the enthalpy change which occurs in a system when a matter is transformed by a chemical reaction under standard conditions. Here the enthalpy of the overall chemical reaction is  -1,300 kJ. The correct option is B.

In any general chemical reaction, the reactants undergo chemical changes to form products. The change in enthalpy is represented as ΔrH and is termed as the reaction enthalpy. It can be calculated by subtracting the sum of enthalpies of all the reactants from that of the products.

ΔrH  = ∑ aiH products - ∑ bi H reactants

Here we should reverse the first reaction and also multiply its ΔH by (- 1):

P₄O₆(s) → P₄(s) + 3O₂(g), ΔH₁' = 1640.1 kJ.

The second reaction is also reversed and also multiply its ΔH by (- 1):

P₄(s) + 5O₂(g) → P₄O₁₀(s), ΔH₂' = - 2940.1 kJ.

If we add the two reactions after modification, we get:

P₄O₆(s) → P₄O₁₀(s).

Therefore,  ΔH = ΔH₁' + ΔH₂' = 1640.1 kJ + (- 2940.1 kJ) = - 1300 kJ.

Thus the correct option is B.

To know more about enthalpy of a reaction, visit;

https://brainly.com/question/1657608

#SPJ7

Answer:

A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.

Answer:

will not change

Explanation:

A saturated solution is a mixture in which the maximum amount of a given solute has been dissolved into the solvent. ... At this point adding more solute will not change the concentration of the solution; adding more solute will simply result in more solid at the bottom of the solution.

Answer: Sublimation

Explanation:

Sublimation : It is a process in which a solid directly changes to gaseous phase by providing heat.

Freezing is a process in which a liquid changes into solid phase when allowed to cool.

Condensation is a process in which a gas changes into liquid phase when allowed to cool.

 Deposition is a  process in which a gas deposits as solid phase when allowed to cool.

Thus change of state where energy is absorbed is sublimation.

Answer:

i think the answer is c.

Explanation:

Answer:

SEE EXPLANATION

Explanation:

We must first obtain the molar mass of CHCl3 as follows;

CHCl3 = ( 12.01 * 1 )+ (1.008 * 1 ) + ( 35.45 * 3 ) => 119.37 g/mol

Then we obtain the percentage by mass of each element

For Carbon =  ( atomic mass C / molar mass CHCl3 ) * 100

C  =  (12.01 / 119.37 ) * 100

C = ( 0.1006 * 100 )

C =  10.06 %

For Hydrogen :

H = ( atomic mass H / molar mass CHCl3 ) * 100

H = ( 1.008 / 119.37 ) * 100

H = 0.008444 * 100

H = 0.8444 %

For Chlorine :

Cl  ( molar mass Cl3 / molar mass CHCl3 ):

Cl =  ( 3 * 35.5 / 119.37 ) * 100

Cl =  ( 106.5 / 119.37 ) * 100

Cl = 0.8921 * 100

Cl = 89.92%

Given :

It takes 45.60 mL of a 0.225 M hydrochloric acid solution to react completely with 25.00 mL of calcium hydroxide in the given reaction.

2HCl(aq) + Ca(OH)2(aq) --> CaCl2(aq) + 2H2O(l)

To Find :

The molar concentration of the calcium hydroxide solution.

Solution :

From given equation 2 mole of hydrochloric acid react with 1 mole of calcium hydroxide.

So,

[tex]2M_1V_1 = M_2V_2\\\\2\times 0.225 \times 45.60 = M_2 \times 25 \\\\M_2 = \dfrac{20.52}{25}\\\\M_2 = 0.8208 \ M[/tex]

Therefore, molar concentration of the calcium hydroxide solution is 0.8208 M.

Answer:

Molar concentration of the calcium hydroxide solution = 0.2052 M

Explanation:

Volume of HCl = 45.60 mL  = 0.0456 L

Molar concentration of HCl = 0.225 M

Volume of Ca(OH)2 = 25.00 mL  = 0.025 L

No. of moles of HCl = (0.225 M)*(0.0456 L)   = 0.01026 mol

As we know

2 moles of HCl require 1 mole of Ca(OH)2, hence, .01026 moles of HCl will need 0.5*(0.01026) = 0.00513 moles of Ca(OH)2

Molar concentration of Ca(OH)2 = [(0.00513 mol)/(0.025 L)]   = 0.2052 M

Answer:

Molecular formula => C₅H₅O₅

Explanation:

From the question given above, the following data were obtained:

Empirical formula = CHO

molar mass of compound = 145 g/mol

Molecular formula =?

The molecular formula of the compound can be obtained as follow:

Molecular formula = Empirical formula × n

Molecular formula = [CHO]ₙ

[CHO]ₙ = 145

[12 + 1 + 16]n = 145

29n = 145

Divide both side by 29

n = 145 / 29

n = 5

Molecular formula = [CHO]ₙ

Molecular formula = [CHO]₅

Molecular formula => C₅H₅O₅

Answer:

1. CH3Br + NaOH --------> H3C---OH + Na---Br

Explanation:

Answers:

1. firstly Start numbering from that carbon atom which would be nearest to chlorine .

2. then if u observed properly , both chlorine is attached are attached to 2nd carbon atom.

3.but in first one chlorine is on the left side

whereas in the second one chlorine right side.

p.s:

1. well, were u have number carbon three in above pic take it as C1 than C2( if u observed it is were Cl is attached to C2 ) than C3 ,C4.

2. Then similarly in second molecules where u have number C3 in above pic take it as C1 than C2 (if u observed , again Cl is attached to C2 but this time it is one on opposite sides.

now imagine if u kept first molecules on second one.

matching C1 C2 C3 C4 of first molecules with

C1 C2 C3 C4 of second molecule .

u will observed that in both of them Cl is on C2 but they in exactly opposite position

Explanation:

Enantiomers are a pair of molecules that exist in two forms that are mirror images of one another but cannot be superimposed one upon the other.

Answer:

It's too far away

Explanation:

According to classical mechanics, gravitational pull is inversely proportional to the distance squared; as the distance increases, the gravitational pull decreases at a faster and faster rate. Since Alpha Centauri A is a few lightyears (Tens of trillions of kilometers away), without even needing to calculate the force of gravity, it is very miniscule.

Answer:

1 : one that carries : bearer, messenger. 2a : an individual or organization engaged in transporting passengers or goods for hire. b : a transportation line carrying mail between post offices.

Answer:

25 minutes

Explanation:

V = Volume = [tex]90\ \text{m}^3[/tex]

[tex]C_0[/tex] = Radon concentration under steady state = 1.5 Bq/L

k = Radon decay rate = [tex]2.09\times 10^{-6}\ \text{s}^{-1}[/tex]

[tex]Q[/tex] = Venting rate = [tex]0.14\ \text{m}^3/\text{s}[/tex]

[tex]C_f[/tex] = Final concentration of radon = 0.15 Bq/L

Theoretical detention time is given by

[tex]\theta=\dfrac{V}{Q}\\\Rightarrow \theta=\dfrac{90}{0.14}\\\Rightarrow \theta=642.86\ \text{s}[/tex]

We have the relation

[tex]C_f=C_0e^{-(\dfrac{1}{\theta}+k)t}\\\Rightarrow t=\dfrac{\ln\dfrac{C_f}{C_0}}{-(\dfrac{1}{\theta}+k)}\\\Rightarrow t=\dfrac{\ln\dfrac{0.15}{1.5}}{-(\dfrac{1}{642.86}+2.09\times 10^{-6})}\\\Rightarrow t=1478.25\ \text{s}=\dfrac{1478.25}{60}=24.63\approx 25\text{minutes}[/tex]

The time taken to reach the acceptable level of concentration is 25 minutes.

Explanation:

pdrias darme la traduccion no te entiendo