How you even don't know the basic information
it's disgusting.
You've just deployed a new Cisco router that connects several network segments in your organization. The router is physically located in a server room that requires an ID card to gain access. You've backed up the router configuration to a remote location in an encrypted file. You access the router configuration interface from your notebook computer by connecting it to the console port on the router. You've configured the management interface with a username of admin and a password of password. What should you do to increase the security of this device
Answer:
Change the default administrative user name and password.Use an SSH client to access the router configuration.Explanation:
Remember, we are told the default username and password were simply, "admin" and "password". From a security perspective, both the password and username are weak choices. Hence, to increase the security of the notebook computer where the router configuration management interface is found, it is best you change the password.
Next, by using a Secure Shell Protocol (SSH) client to access the router configuration, the security is enhanced considering the fact the new Cisco router would connect several network segments in the organization.
What is the difference between a hard drive and a tape drive? Hard drives use magnetic heads and are fast to write data; tape drives write to disks and are fast to retrieve data. Hard drives write to disks and are fast to retrieve data; tape drives use magnetic heads and are fast to write data. Hard drives use magnetic heads and are best for archival data; tape drives write to disks and are used for ongoing backups. Hard drives write to disks and are used for ongoing backups; tape drives use magnetic heads and are best for archival data.
Answer:
A tape drive provides sequential access storage, unlike a hard disk drive, which provides direct access storage. A disk drive can move to any position on the disk in a few milliseconds, but a tape drive must physically wind tape between reels to read any one particular piece of data.
Explanation:
Architecturally tape drives are sequential storage, meaning that if you need to access some data at the end of the tape you needed to seek to the end and retrieve it. This can take seconds or minutes. Disks, OTOH are random access. Some hard drives use rotating media and movable heads , so the seek times are instantaneous , at least compared with tape drives. However, like tapes, there is a big advantage to using a rotating hard drive as sequential storage. It takes time, measured in milliseconds, for a head to move to another track. So traditionally, random access is much slower than sequential access.
SSDs have no internal moving parts so random access occurs in the same time frame as sequential access. Moreover, these drives usually have very high performance. For example, they can saturate a SATA data link, meaning that the SATA connection to the motherboard is now a bottleneck in disk access.
At one time tape drives were very popular. They were a low-cost alternative to using disks as backup. They were especially useful when IBM invented the Winchester “fixed” drive. This meant that the hard drive is fixed within its enclosure like they are today. Prior to this one could remove the drive pack and replace it. This was helpful when upgrading to a new version of the operating system as it was simple to replace the older drive pack should there be a problem.
Tape drives can be used in larger data centers, due to the fact that tape volumes can be removed and replaced so that the actual tape drive can backup many disk sets. Also the tape volumes can be stored off-site or in a fire-proof vault so this is valuable in a data recovery scenario.
Which option is used to insert a table in PowerPoint from another Office application?
In the Insert Object dialog box, choose Create from file.
In the Design tab, choose the Table Styles option.
In the Insert Table dialog box, choose Insert Table.
In the Layout tab, choose the Merge option.
Answer: In the Insert Object dialog box, choose Create from file.
Explanation:
To insert a table into PowerPoint from another Office application, go to the Insert Tab. In the Text ribbon on the far right, you will see "Object" next to Equation.
After clicking on that, select the "Create from File" option. It will allow you to browse a file you want to import from. PowerPoint will import the data from this file.
The ALIGN attribute of the P-tag cannot take what value right or left or justify or center?
The align attribute of p tag can not take 'much' value
#LETS STUDY#BRAINLEST LOVE❣️
Which tab on the ribbon is used to access the global Access 2016 options?
Home
Create
Database Tools
File
Explanation:
the answer is Database Tools
Why is it important for a photographer to understand the relationship between color and light?
Answer: Different light can cast a different impact on the picture. If a photographer knows how the light will change the picture, he or she can click the picture he wants.
can you give me some hints
The most likely reason a firm would decide to establish an extranet would be the desire to Multiple Choice speed the flow of information on its private network by increasing the bandwidth. make the information on its network widely available to the general public. share information and collaborate with a select group of outside organizations or individuals. overcome the speed and capacity limitations of its external connection to the Internet by gaining access to the very-high-speed Backbone Network Service.
Answer: share information and collaborate with a select group of outside organizations or individuals.
Explanation:
When a company uses an intranet, it is for the purpose of sharing information within the company so in the same vein, an extranet is done to share information with entities outside the company be it people or organizations.
For information to be shared, the other companies and organizations need to have the means and authorization to join the extranet. Extranets are very useful as they enable collaboration across vast distances thereby increasing productivity.
The most likely reason a firm would decide to establish an extranet is B. share information and collaborate with a select group of outside organizations or individuals.
An extranet simply means a controlled private network that allows customers, vendors, partners, suppliers, etc to gain information about a company.
Extranet is vital to share information and collaborate with a select group of outside organizations or individuals. It is usually a private part of a website.
Read related link on:
https://brainly.com/question/10156285
Modify the statistics program from this chapter so that client programshave more flexibility in computing the mean and/ or standard deviation.Specifically, redesign the library to have the following functions:mean(nums) Returns the mean of numbers in nums.stdDev(nums) Returns the standard deviation of nums.meanStdDev (nums) Returns both the mean and standard deviation of nums.
Answer and Explanation:
Using Javascript:
function mean(nums){
var array_numbers= new array(nums);
var meanofNums= array_numbers.reduce()/array_numbers.length;
Console.log(meanofNums);
}
Function Std(nums){
var OurArray= new Array(nums);
var meanOfnums= mean(nums);
var i;
for(i=0; i<=OurArray.length; i++){
OurArray[i]= OurArray[i]-meanOfnums*OurArray[i]-meanOfnums;
}
var al_stdOfnums= OurArray.reduce()/OurArray.length;
var stdOfnums= Math. sqrt(al_stdOfnums);
Console.log(stdOfnums);
}
function meanStdDev (nums){
mean(nums);
Std(nums);
}
/*From the code above, we have defined functions and used them in the last function definition meanStdDev (nums), making for code reusability. In defining the functions, we have followed the formulas for calculating mean and standard deviations and implemented in that order. Notice how we used a for loop in std(nums) function definition to iterate through the elements of the array nums, squaring each value and reassigning a new value for each element(using index value) in the array. We then added these values in array using reduce method, dividing by array length and square rooting the value using the math object method sqrt().*/
what is the difference between b and br tag
Answer:
<b> tag is used to make the text bold. <br> tag is used to insert a line break into a text font.
Explanation:
The <b> tag in HTML is used to indicate the importance of the text. The text is written within <b> tag display in bold size. You can do that by using CSS also there is a similar tag <strong> tag that has a similar effect on content.
The <br> tag inserts a single line break. The <br> tag is useful for writing addresses or poems. The <br> tag is an empty tag which means that it has no end tag.
ou use productivity apps on your iPad tablet device while traveling between client sites. You're concerned that you may lose your iPad while on the road and want to protect the data stored on it from being compromised. Currently, your iPad uses a 4-digit PIN number for a passcode. You want to use a more complex alpha-numeric passcode. You also want all data on the device to be erased if the wrong passcode is entered more than 10 consecutive times. What should you do
Answer:
Enable the Erase data optionDisable the simple passcode optionExplanation:
Most smartphone security experts agree that one way to prevent unauthorized access to one's iPad is to enable the erase data feature. Enabling this feature is believed to allow the possibility of all data on the device to be erased if a wrong passcode is entered after a specified number of times.
Of course, it is also possible to set a complex alphanumeric passcode, however, you'll need to first disable the simple passcode option.
write chracteristics of all 5 generation of computer
Answer:
First generation — 1940–1956
-used vacuum tubes
ENIAC, UNIVAC I, IBM 650, IBM 701 etc.
mainframes taking up entire rooms
punched cards I/O
electrostatic and mercury delay line memory, beginning use of core
Second generation — 1956-1963
-used discrete transistors
IBM 7090 and 7094, UNIVAC 1107, PDP-1 and 8, etc.
first appearance of minicomputer (PDP-8)
punched cards I/O and line printers (mainframe), TTY (minicomputers)
core memory, magnetic tape for mass storage
Third generation — 1964-1971
-used integrated circuits
IBM System/360, UNIVAC 1108, PDP-8/I, PDP-11/20 and PDP-11/45, etc.
mostly same I/O and memory as second generation
Fourth generation — 1971-present
-use microprocessors
PDP-11/03 and PDP-11/34, Apple ][, IBM PC, Apple Macintosh, IBM z Series, etc.
transition from minicomputers to personal computers
video terminals used for I/O, specialty computer printers developed
fewer mainframes
semiconductor memory replaces core memory
hard drives and optical drives replace magnetic tape for mass storage, followed by solid-state drives (SSD)
Fifth generation — (current research)
-artificial intelligence and quantum computing
Answer:
The five generations of computer are characterized by electrical current flowing through the processing mechanisms listed below : The first within vacuum tubes The second within transistors The third within integrated circuits The fourth within microprocessors clips The fifth unveiled smart devices capable of artificial...
Explanation:
☆hope it is helpful to you ☆
☆MiraculousNisha^_^A local area network (LAN) is best described as a(n): Multiple Choice computer system that connects computers of all sizes, workstations, terminals, and other devices within a limited proximity. electronic library containing millions of items of data that can be reviewed, retrieved, and analyzed. method to offer specialized software, hardware, and data-handling techniques that improve effectiveness and reduce costs. system that allows computer users to meet and share ideas and information.
Answer:
computer system that connects computers of all sizes, workstations, terminals, and other devices within a limited proximity.
Explanation:
A local area network (LAN) refers to a group of personal computers (PCs) or terminals that are located within the same general area and connected by a common network cable (communication circuit), so that they can exchange information from one node of the network to another. A local area network (LAN) is typically used in small or limited areas such as a set of rooms, a single building, school, hospital, or a set of well-connected buildings. Some of the network devices or equipments used in a local area network (LAN) includes an access point, personal computers, a switch, a router, printer, etc.
Typically, a local area network (LAN) is best described as a computer system that connects computers of all sizes, workstations, terminals, and other devices such as switches, routers and access points (APs) within a limited proximity.
Which computer can perform the single dedicated task? a. Which commuter can perform the function of both analog and digital device
The computer can perform the single dedicated task is a Special-purpose computer.
Hybrid Computer can perform the function of both analog and digital device.What are Hybrid computers?This is known to be made up of both digital and analog computers as it is a digital segments that carry out process control through the conversion of analog signals to digital signal.
Note that The computer can perform the single dedicated task is a Special-purpose computer.
Hybrid Computer can perform the function of both analog and digital device.Learn more about computers from
https://brainly.com/question/21474169
#SPJ9
Select the item that best represents technology transfer?
Newtonian telescope
Magnetic Compass
Printing Press
Answer:
Printing Press
Explanation:
Technology transfer is the simple process of sharing or dissemination of information from person to person (or from one organisation to another)
Therefore, the item that best represents technology transfer from the given answer choices is the printing press.
This is because, the printing press helped to print paper containing information which was sent from one location to another.
1. Read the following scenario. What type of business letter do you think is required in this situation? (1 point)
Melissa and Melrose are both first-year students at a local community college. They both have interest in volunteering with a nonprofit organization. They decided to reach out to nonprofit organizations to ask about the steps they need to take in order to volunteer.
Answer:
It requires a formal letter.
Answer:
This would require a formal business letter, the type being a cover letter or inquiry.
Explanation: yes
Suppose you are given a sequence that is described by a formula, starting at index n=0. If you need to change the starting index to n=1, then you just need to replace n in the formula by n+...?
Answer:
[tex]n+1[/tex]
Explanation:
Given
[tex]n = 0[/tex] --- starting index
Required
Change the starting index to [tex]n = 1[/tex]
We have:
[tex]n = 0[/tex]
To change the starting index to k, we simply rewrite as:
[tex]n+k[/tex]
In this case; k=1; so, the starting index will be: [tex]n+1[/tex]
A driver that approaches a controlled intersection with a signal that is not working must:
Spreadsheet allow three types of cell addressing. They include ______addresses, such as $E$1, ______addresses, such as R$3, and ______addresses, such as D4.
Answer:
The answer is below
Explanation:
Based on the Microsoft Excel Formatting style, Spreadsheet allows three types of cell addressing. They include:
1. ABSOLUTE CELL ADDRESSING addresses, such as $E$1,
2. MIXED CELL ADDRESSING addresses, such as R$3, and
3. RELATIVE CELL ADDRESSING addresses, such as D4.
How many characters should a strong password have? four six eight ten
Answer:
I say it have to be aleast 8 to complete a strong password
Explanation:
it's common sense
Answer:
8
Explanation:
The more the better but ten too much
what are binary code
Answer:
Binary code is a coding system using binary digits 0 and 1 to represent a letter, digit, or other characters in a computer or other electronic device. The binary code assigns a pattern of binary digits, also known as bits, to each character, instruction, etc.
explain the tearms alink and vlink
Answer:
The alink (active link) color appears while the mouse is clicking the link. The vlink (visited link) is the color of the link after the user has already visited it.
BIOS has two jobs. One is to boot up, or start, the computer. What is the other? Maintain the computer’s software firewall. Ensure the fastest possible Internet speed. Provide the basic interface for the hardware. Perform regularly scheduled memory backups.
Answer:
Provide the basic interface for the hardware.
Explanation:
Audience centered public speakers are inherently sensitive to the
Answer:
the diversity of their audiences
Explanation:
Elsa wants to save her work at the office to be continued at home either on a pen drive or CD. Outline three reasons why she will choose the pen drive over the CD
Answer:
Pen Drive offers more accessibility
Not every device is equipped with a CD player but every device has a USB port for a pen Drive. Saving on the pen Drive will therefore enable the data to be more accessible.
Pen Drive has more space.
CDs usually have a storage capacity of below a gigabyte whilst pen drives can reach up to 2 terabytes thereby offering exponentially more space to save data.
Safety of Data
CDs are more prone to damage as data could be lost if the CD is scratches. Pen Drives on the other hand are encased in an outer case that protects the data.
Hoda needs to create a chart that is associated with an Excel spreadsheet. She needs to ensure that if the data in the spreadsheet changes, the chart in her presentation will be updated. Which option must she choose?
Embed the chart.
Link the chart.
Insert the chart as a picture.
This cannot be done.
Answer:
the awnser is B
Explanation:
Answer:
B, Link the chart.
Explanation:
The HTML tag for the smallest heading is what
Answer:
The HTML <h1> to <h6> tag is used to define headings in an HTML document. <h1> defines largest heading and <h6> defines smallest heading.
Explanation:
How are computers used in medical sector? Any 3 meaningful points.
Answer:
Computers such as the Cathode Ray Oscilloscopes are used to measure the blood pressure en heart beats in BPM.
Computers such small locomotive surgical cameras which provide surgeon's sight in the inner body of the victim during surgery.
30points!!!! Plz answer quickly
Select the correct answer.
What should be the ideal position of the image in a video if it is the main feature of the video?
A. bottom
B. right
C. left
D. center
Answer:
center
Explanation:
that is the focal point
Answer:
D
Explanation:
since it's the main feature of the video it would be best to put it on the center so that all focus is on it because if you put it in the corner or another position it won't be the main feature and definitely not the center of attraction.
I hope you understand.and sorry if it's wrong
The CPU is considered to be the............of a computer system
Answer:
The Central Processing Unit (CPU) is the brain or main source of the computer system.
Which unit of computer is used to processed data?
Please help!!!!!!
[tex]Hello[/tex] [tex]There![/tex]
[tex]AnimeVines[/tex] [tex]is[/tex] [tex]here![/tex]
Is it Central Processing Unit?
[tex]HopeThisHelps!![/tex]
[tex]AnimeVines[/tex]
Answer:
Central Processing Unit (CPU)
Explanation:
The Central Processing Unit (aka CPU), is used to process the data.
