What is the net force in this picture?


hellllllllllllllllllloppppppppppppppppppp mmmmmmmmmmmmeeeeeee

Answer:

4 x 10⁶m/s²

Explanation:

Given parameters:

Initial velocity  = 0m/s

Time  = 0.0001s

Final velocity  = 400m/s

Unknown:

Acceleration of the object  = ?

Solution:

Acceleration is the rate of change of velocity with time;

 Acceleration  = [tex]\frac{Final velocity - Initial velocity }{Time }[/tex]  

 Acceleration  = [tex]\frac{400 - 0}{0.0001}[/tex]   = 4 x 10⁶m/s²

Answer: Gamma rays (violet) have the shortest wavelengths and the highest frequencies.

Explanation: The wavelength of the gamma rays is less than 0.01 nanometers. The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength.

The electromagnetic waves have the shortest wavelength and the highest frequency is Gamma rays (violet).

Gamma radiation, from gamma rays (γ), is a type of electromagnetic radiation usually produced by radioactive elements. Gamma rays, due to their high energy, are able to penetrate matter more deeply than alpha or beta radiation.

Gamma ray is a type of high frequency electromagnetic radiation usually produced by radioactive elements.

See more about Gamma rays at brainly.com/question/23281551

Explanation:

1A. The visible light portion of the electromagnetic spectrum shows the rainbow of colors, with violet and blue having shorter wavelengths, and therefore higher energy. At the other end of the spectrum toward red, the wavelengths are longer and have lower energy.

so its option 2

2A. Atom and molecules

PLEASE THANK, RATE AND FOLLOW ME,

AND PLEASE MARK ME AS "BRAINLIEST" ANSWER

HOPE IT HELPS YOU

Answer:

Newton

Explanation:

The unit of force is Newton and it is given after Sir Isaac Newton for his tremendous works in this regard.

 Force is the product of mass and acceleration of a body.

    Force  = mass x acceleration  

 The unit of mass = kg

                    acceleration  = m/s²

So;

      1N  = 1kgm/s²

Therefore, the unit of force is newtons and 1N is equal to  1kgm/s²

Answer:

8) A hanging 7.5 kg object stretches a spring 1.1 m. What is the spring constant? 1 . 1 66. 82 NIMO 9) A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m? Iouliply then divide 875 X 4. 2- - (4 04. 7919) 10) A spring with a spring constant of 25 N/m is stretched 65 cm. What was the force used? 11) A 25 N force stretches a spring 280 cm. What was the spring constant? 12) A 75 N force stretches a spring 175 cm. What was the proportionality constant? 8) 66.82 N/m 9) 401.79 kg 10) 16.25 N 11) 8.93 N/m 12) 42.86 N/m

Explanation:

A spring has a constant of 875 N/m. and the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.

The spring constant is a characteristic of a spring which is defined as the ratio of the force affecting the spring to the displacement which is caused by that force. The SI unit of spring constant is N.m⁻¹ (Newton per meter).

The spring constant is:

F = -k/ x

where, k is the spring constant

F denotes the force,

and x denotes the change in the length of the spring.

k = 875N/m

x = 4.5m

We know that

Kx = mg

m= kx/ g

m = 875 × 4.5/ 9.8

m = 401.78kg

Therefore, the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.

Learn more about Spring constant here:

https://brainly.com/question/14159361

#SPJ5

Answer:

According to newtons first law of motion an object remains in its state of rest or motion in a straight line unless an external unbalanced forces acts upon it. This is the reason why Newtons first law of motion is often called the LAW OF INERTIA

Answer:

D.   Most metals can be drawn into a wire, while nonmetals would break apart

Explanation:

The correct statement from the given choices is that most metals can be drawn into a wire while non-metals would break apart.

Metals are malleable due to the presence of metallic bonds between their atoms. The large electron cloud due to the electropositivity of metals allows for the wide range of physical properties observed in them.

Non-metals are brittle and cannot conduct neither heat nor electricity.

It's none of the above hope this helps

Answer:

Final velocity v = 4 m/s

Explanation:

Given:

Initial velocity u = 0 m/s

Acceleration a = 0.16 m/s²

Distance s = 50 m

Find:

Final velocity v

Computation:

Using; v² = u² + 2as

v² = (0)² + 2(0.16)(50)

v² = 16 m/s

v = 4 m/s

Final velocity v = 4 m/s

Answer:

the steel ball has more potential

Explanation:

Answer:

steel ball has more potential energy

Answer:

If I’m correct 300 joules

Explanation:

Answer:

He traveled 9km

Explanation:

To do this problem you need to use the equation which is Speed= distance/time and this problem gives you the speed which is 18 km/h and it gives you the time 1/2 hour so you write the equation 18= d/ 1/2 which his distance is 9km

Answer:

No

Explanation:

Not all metals stick to magnets. Like aluminum. if you were to stick a magnet on to an aluminum it would fall off.

Answer:

time speed accelaration negatives backwards

Explanation:

Answer:

financial aid

Explanation:

edge

Answer:

the answer is b

Explanation:

Answer:

b

Explanation:

I just did it on a p e x

Answer:

the mass of the central body (earth) and the radius of the orbit affect orbital velocity

Explanation:

Answer: c

Explanation:

The total distance the ultrasound pulse travelled is, twice the distance of the sea floor

Because it went back and forth

Answer:

[tex]\mathbf{\alpha = 16.06 \ rad/s^2}[/tex]

Explanation:[tex]A \ frictionless \ pulley, \ whic h\ can \ be \ modeled \ as \ a \ 0.83 k g \ solid \ cylinder \ with \ a \ 0.30 \ m \ radius,[/tex]  [tex]\ has \ a \ rope \ going \ over \ it[/tex] [tex]The \ tensions \ in \ the \ rope \ are \[/tex] [tex]12 n \ and \ 10 n . \ What \ is \ the \ angular \ acceleration \ of \ the \ pulley?[/tex]

[tex]From \ the \ given \ information:[/tex]

[tex]The \ moment \ of \ inerti a \ of \ a \ solid \ cylinder[/tex] [tex]I = \dfrac{1}{2}mr^2[/tex]

[tex]I = \dfrac{1}{2}(0.83)(0.3)^2[/tex]

[tex]I = 0.03735 \ kg \ m^2[/tex]

[tex]The \ net \ torque = F_1(r) - F_2(r) \\ \\ = 12(0.3) - 10(0.3) \\ \\ = 0.6 \ N.m[/tex]

[tex]Torque (T) = moment \ of \inertia (I) \times angular \ acceleration ( \alpha)[/tex]

[tex]\alpha = \dfrac{T}{I}[/tex]

[tex]\alpha = \dfrac{0.6 \ Nm}{0.03735 \ kg \ m^2}[/tex]

[tex]\mathbf{\alpha = 16.06 \ rad/s^2}[/tex]

Answer:

Filtration is a method for separating an insoluble solid from a liquid. When a mixture of sand and water is filtered: the sand stays behind in the filter paper (it becomes the residue ) the water passes through the filter paper (it becomes the filtrate )

Explanation:

Listo!

Answer:

Answering the following questions will help you to focus on the outcomes of these experiments:

1.How does the length to height ratio (the IMA) of trial 1 compare to trial 2?

= Trial 1 is 5.09, and Trial 2 is 3.25. Trial 1 is higher because the height of the trial is less than trial 2.

2.Why is the actual mechanical advantage less than the ideal mechanical advantage in each of the trials?

= It is because the machine's ideal mechanical advantage reflects the increase or decrease in force that would have occurred without friction. It is always greater than the actual mechanical advantage because all machines have to overcome friction.

3.If a machine was 100% efficient, how would the AMA compare to the IMA?

= In any real machine, some of the efforts are used to overcome friction. Thus, the resistance force ratio to the effort (AMA) is less than the (IMA).

A frictionless machine would have an efficiency of 100%.

Answer:A heavy box has a mass of 30 kg. The box experiences a net force of 90 N when pushed along the floor. Use

this information to answer questions 17 and 18

Explanation:

17. What is the acceleration of the box?

a. 3 m/s 2 b. 2 m/s 2 c. 0.3 m/s 2 d. 0.5 m/s 2

18. If the mass of the box was changed to one third as much, and the force was held constant, how would

the acceleration change?

a. It would be one third as much

b. It would be 3 times as much

c. It would be one half as much

d. It would be 2 times as much

Answer:

because you use more force to push than to pull (well it depends how heavy it is)

Explanation:

Answer:

m = 0.51[kg]

Explanation:

Potential energy is defined as the product of mass by gravity by height.

[tex]E_{pot}=m*g*h[/tex]

where:

Epot = potential energy = 15 [J]

m = mass [kg]

g = gravity acceleration = 9.8 [m/s²]

h = elevation = 3 [m]

Now replacing:

[tex]E_{pot}=m*g*h\\15=m*9.8*3\\m = 0.51[kg][/tex]

Earth's rotation and spherical shape cause winds to veer to the right (in the northern Hemisphere) or to the left (in the southern Hemisphere) of the direction they want to go.  This is known as the Coriolis effect.

If you didn't know that you're on a rotating Earth, and you looked at the patterns of the winds, you'd think there's some kind of force that's making the airflow veer to the right or left of the direction it actually wants to go.  This is known as the Coriolis force.  It's a"pseudo force", because it doesn't really exist.  It only LOOKS like it's there, because of the Earth's rotation and spherical shape..

The statement "Earth's rotation causes winds to veer to the west or to the east" is true about the Coriolis effect.

Fluid materials such as wind and ocean currents take different directions depending on the hemisphere, this movement of deviation is called the Coriolis effect.

Therefore, we can conclude that the force that tends to deflect the trajectory of objects moving across the entire earth's surface is known as the Coriolis effect.

Learn more about the Coriolis effect here: https://brainly.com/question/14290551

Answer:

food chain / web lol? was this a question?

The chemical process which requires energy is breaking bond in KOH and HBr. Hence, option C is correct.

The capacity to perform work is known as energy in physics. Potential, kinematic, thermodynamic, electromagnetic, chemical, nuclear, and other types are all possible.

As energy is transferred through one body to another, there is also heat and work. As a result, heat transfer may result in thermal energy, whereas labor done may result in mechanical power.

As per the given reaction in the question,

KOH + HBr - KBr + H20

Here, in this reaction the chemical process which requires the energy is at the time of breaking of bonds in KOH and HBr at that time the energy is required.

Therefore, it is concluded that breaking bonds in KOH and HBr i.e., option C is correct.

To know more about Energy:

https://brainly.com/question/1932868

#SPJ2

Answer:

d = 1.65 m

Explanation:

Given that,

The speed of a ball, v = 3 m/s

A ball rolls a level table that is 1.5 m above the floor.

We can find how long the ball is in free fall. We can use the second equation of kinematics as follows :

[tex]s=ut+\dfrac{1}{2}gt^2[/tex]

u is the initial speed in the vertical direction

So,

[tex]s=\dfrac{1}{2}gt^2\\\\t=\sqrt{\dfrac{2s}{g}} \\\\t=\sqrt{\dfrac{2\times 1.5}{9.8}} \\\\t=0.55\ s[/tex]

Now, using the formula of velocity.

[tex]v=\dfrac{d}{t}\\\\d=vt\\\\d=3\times 0.55\\\\d=1.65\ m[/tex]

So, the landing spot is at 1.65 m from the table.